arXiv subjects

F. Djurabekova

Publications and source records attributed to F. Djurabekova.

14 recordsLinked to original sources

arXiv2026

A Linear Collider Vision for the Future of Particle Physics

In this paper we review the physics opportunities at linear $e^+e^-$ colliders with a special focus on high centre-of-mass energies and beam polarisation, take a fresh look at the various accelerator technologies available or under development and, for the first time, discuss how a facility first equipped with a technology mature today could be upgraded with technologies of tomorrow to reach much higher energies and/or luminosities. In addition, we will discuss detectors and alternative collider modes, as well as opportunities for beyond-collider experiments and R\&D facilities as part of a linear collider facility (LCF). The material of this paper will support all plans for $e^+e^-$ linear colliders and additional opportunities they offer, independently of technology choice or proposed site, as well as R\&D for advanced accelerator technologies. This joint perspective on the physics goals, early technologies and upgrade strategies has been developed by the LCVision team based on an initial discussion at LCWS2024 in Tokyo and a follow-up at the LCVision Community Event at CERN in January 2025. It heavily builds on decades of achievements of the global linear collider community, in particular in the context of CLIC and ILC.

hep-ex↗

arXiv2026

Plastic Relaxation without Dislocations in $β$-Ga$_2$O$_3$ Heteroepitaxy: A Structural Peculiarity of Ga$_2$O$_3$ Polymorphs

$β$-Ga$_2$O$_3$ grows as three-dimensional islands on mismatched c-plane sapphire, often on a thin $α$-Ga$_2$O$_3$ wetting layer, and eventually forms a continuous film by island coalescence. Experiments reveal the $β$ film to be relaxed. Surprisingly no dislocations are observed, suggesting an unusual plastic relaxation path. We reveal the key mechanisms underlying this process by combining density functional theory, continuum nucleation theory, and molecular dynamics simulations. Plastic relaxation occurs through rearrangement of the Ga atoms beneath the oxygen plane shared by both the wetting layer and the (-201) $β$-Ga$_2$O$_3$ structures. A local $α$ to $β$-relaxed phase transition is thus realized within a single plane, allowing full relaxation of the $β$-Ga$_2$O$_3$ island.

cond-mat.mtrl-sci↗

arXiv2025

Effects of training machine-learning potentials for radiation damage simulations using different pseudopotentials

Machine learning (ML) has become a commonplace approach in the development of interatomic potentials for molecular dynamics simulations, and its use also for radiation effect modelling is increasing. In this work, we investigate the effects of training ML potentials to density functional theory data calculated with different pseudopotentials in nickel. We look in detail at the differences that appear in radiation damage simulations. The use of a "harder" pseudopotential with semicore electrons has a direct impact on the short-range interactions, which in turn has implications on the radiation damage simulations. We find that despite these differences, the average threshold displacement energy is quite similar (40-50 eV for Ni). However, we find significant differences in the cumulative damage predicted by massively overlapping cascade simulations and compare them with Rutherford Backscattering Spectroscopy/channeling experiments. We also investigate approaches to modify the repulsive pair interactions after training the potentials and discuss the feasibility of such approaches.

cond-mat.mtrl-sci↗

arXiv2025

The Linear Collider Facility (LCF) at CERN

In this paper we outline a proposal for a Linear Collider Facility as the next flagship project for CERN. It offers the opportunity for a timely, cost-effective and staged construction of a new collider that will be able to comprehensively map the Higgs boson's properties, including the Higgs field potential, thanks to a large span in centre-of-mass energies and polarised beams. A comprehensive programme to study the Higgs boson and its closest relatives with high precision requires data at centre-of-mass energies from the Z pole to at least 1 TeV. It should include measurements of the Higgs boson in both major production mechanisms, ee -> ZH and ee -> vvH, precision measurements of gauge boson interactions as well as of the W boson, Higgs boson and top-quark masses, measurement of the top-quark Yukawa coupling through ee ->ttH, measurement of the Higgs boson self-coupling through HH production, and precision measurements of the electroweak couplings of the top quark. In addition, ee collisions offer discovery potential for new particles complementary to HL-LHC.

hep-ex↗

arXiv2025

Plasma treated metals after H- irradiation and its effect on vacuum breakdown behaviour

Vacuum breakdown in accelerator structures is a critical challenge that occurs under high electric fields. In environments subjected to hydrogen ion irradiation or high beam losses, such as in Radio-Frequency Quadrupoles (RFQ), residual hydrocarbons from the vacuum may result in carbon contamination of the metal surfaces from charged particle induced cracking. Under these conditions, it has been assessed that surface carbon contamination leads to a decrement of the surface electric field holding properties. This study extends the latest research by exploring the efficacy of Oxygen Plasma Cleaning (OPC) on metal electrodes irradiated by low energy hydrogen ion beam with the purpose of reducing surface carbon contamination. OPC treatment has been employed on different metals, namely copper beryllium (CuBe2), oxygen-free copper (Cu-OFE), and stainless steel (SS316LN). Treated electrodes have been tested for electric field performance in a DC pulsed system and results compared with non-irradiated electrodes and irradiated ones without OPC treatment. The study indicates a significant reduction in carbon contamination by OPC, enough to allow irradiated materials to achieve performances comparable with the electric field strength of raw surfaces. Moreover, it has been observed that stainless steel samples had some alteration in the surface chemistry that enhanced the materials ability to sustain high electric fields while decreasing vacuum arcing events. Notably, OPC treated SS316LN electrodes surpassed the performance value of untreated ones, demonstrating the potential of plasma treatments in extending the operational performance of accelerator components.

physics.acc-ph↗

arXiv2025

Effect of surface orientation on blistering of copper under high fluence keV hydrogen ion irradiation

Copper and hydrogen are among the most common elements that are widely used in industrial and fundamental research applications. Copper surfaces are often exposed to hydrogen in the form of charged ions. The hydrogen ions can accelerate towards the surface, resulting in an accumulation of hydrogen below the surface. Harmless in low concentrations, prolonged hydrogen exposure can lead to dramatic changes on copper surfaces. This effect is visible to the naked eye in the form of blisters densely covering the exposed surface. Blisters are structural modifications that can affect the physical properties of the surface including, for example, vacuum dielectric strength. Using scanning electron microscopy we found that the blistering of the irradiated polycrystalline copper surface does not grow uniformly with ion fluence. Initially, only some grains exhibit blisters, while others remain intact. Our experiments indicate that grains with the 100 orientation are the most prone to blistering, while the grains oriented in the 110 are the most resistant to it. Moreover, we noticed that blisters assume different shapes correlating with specific grain orientation. Good agreement of experiments with the atomistic simulations explains the difference in the shapes of the blisters by specific behavior of dislocations within the FCC crystal structure. Moreover, our simulations reveal the correlation of the delay in blister formation on surfaces with certain orientations compared to the others with the dependence of the hydrogen penetration depth and the depth and amount of vacancies in copper on the orientation of the irradiated surface.

cond-mat.mtrl-sci↗

arXiv2024

Investigation on different materials after pulsed high field conditioning and low-energy H- irradiation

During operation, the radio-frequency quadrupole (RFQ) of the LINAC4 at CERN is exposed to high electric fields, which can lead to vacuum breakdown. It is also subject to beam loss, which can cause surface modification, including blistering, which can result in reduced electric field holding and an increased breakdown rate. First, experiments to study the high-voltage conditioning process and electrical breakdown statistics have been conducted using pulsed high voltage DC systems in order to identify materials with high electric field handling capability and robustness to low-energy irradiation. In this paper, we discuss the results obtained for the different materials tested. To complement these, an investigation of their metallurgical properties using advanced microscopic techniques was done to observe and characterize the different materials and to compare results before and after irradiation and breakdown testing.

physics.acc-ph↗

arXiv2022

Observation of ripples under different angles

The off-normal ion irradiation of semiconductor materials is seen to induce nanopatterning effects. Different theories are proposed to explain the mechanisms that drive self-reorganization of amorphisable surfaces. One of the prominent hypothesis associates formation of nanopatterning with the changes of sputtering characteristics caused by changes in surface morphology. At ultra-low energy, when sputtering is negligible, the Si surface has still been seen to re-organize forming surface ripples with the wave vector either aligned with the ion beam direction or perpendicular to it.In this work, we investigate the formation of ripples using molecular dynamics in all the three regimes of ripple formation: low angles where no ripples form, intermediate regime where the ripple wave vectors are parallel to the beam, and high angles where they are perpendicular to it. We obtain atom-level insight on how the ion-beam driven atomic dynamics at the surface contributes to organization, or lack of it, in all the different regimes. Results of our simulations agree well with experimental observations in the same range of ultra-low energy of ion irradiation.

cond-mat.mtrl-sci↗

arXiv2022

Comparative study of H accumulation in differently oriented grains of Cu

When metal surfaces are exposed to hydrogen ion irradiation, the light ions are expected to penetrate deep into the material and dissolve in the matrix. However, these atoms are seen to cause significant modification of surfaces, indicating that they accumulate in vicinity of the surface. The process known as blistering may reduces the vacuum dielectric strength above the metal surface, which shows a dense population of surface blisters. In this paper, we investigate how a bubble can grow under the pressure exerted by hydrogen atoms on the walls of the bubble and how this affect to the surface of Cu, whether an external electric field is applied or not.

cond-mat.mtrl-sci↗

arXiv2020

Computational study of crystal defects formation in Mo by machine learned molecular dynamics simulations

In this work, we study the damage in crystalline molybdenum material samples due to neutron bombardment in a primary knock-on atom range of 0.5-10 keV at room temperature. We perform machine learned molecular dynamics (MD) simulations with a previously developed interatomic potential based on the Gaussian Approximation Potential (GAP) framework. We utilize a recently developed software workflow for fingerprinting and visualizing defects in damage crystal structures to analyze the damaged Mo samples by computing the formation of point defects during and after a collision cascade. As a benchmark, we report results for the total number of Frenkel pairs (a self-interstitial atom and a single vacancy) formed and atom displacement as a function of the PKA energy. A comparison to results obtained by using an Embedded Atom Method (EAM) potential is presented to discuss the advantages and limits of the machine learned MD simulations. The formation of Frenkel pairs follows a sublinear scaling law related to the PKA energy with $E^{0.54}_\mathrm{PKA}$ to the GAP MD results and $E^{0.667}_\mathrm{PKA}$ for the EAM simulations. Although the average number total defects is similar for both methods, we notice that MD potentials model different atomic geometries for the complex point defects, where the formation of crowdions is more favorable for the GAP potential. Finally, ion beam mixing results for GAP MD simulations are reported and discussed.

cond-mat.mtrl-sci↗

arXiv2019

On the classification and quantification of crystal defects after energetic bombardment by machine learned molecular dynamics simulations

The analysis of the damage on plasma facing materials (PFM), due to its direct interaction with the plasma environment, is needed to build the next generation of nuclear machines, where tungsten has been proposed as a candidate. In this work, we perform molecular dynamics (MD) simulations using a machine learned inter-atomic potential, based on the Gaussian Approximation Potential framework, to model better neutron bombardment mechanisms in pristine W lattices. The MD potential is trained to reproduce realistic short-range dynamics, the liquid phase, and the material recrystallization, which are important for collision cascades. The formation of point defects is quantified and classified by a descriptor vector (DV) based method, which is independent of the sample temperature and its constituents, requiring only modest computational resources. The locations of vacancies are calculated by the k-d-tree algorithm. The analysis of the damage in the W samples is compared to results obtained by EAM Finnis-Sinclair and Tersoff-ZBL potentials, at a sample temperature of 300 K and a primary knock-on atom (PKA) energy range of 0.5-10 keV, where a good agreement with the reported number of Frenkel pair is observed. Our results provide information about the advantages and limits of the machine learned MD simulations with respect to the standard ones. The formation of dumbbell and crowdion defects as a function of PKA is discussed.

cond-mat.mtrl-sci↗

arXiv2019

The Compact Linear Collider (CLIC) - 2018 Summary Report

The Compact Linear Collider (CLIC) is a TeV-scale high-luminosity linear $e^+e^-$ collider under development at CERN. Following the CLIC conceptual design published in 2012, this report provides an overview of the CLIC project, its current status, and future developments. It presents the CLIC physics potential and reports on design, technology, and implementation aspects of the accelerator and the detector. CLIC is foreseen to be built and operated in stages, at centre-of-mass energies of 380 GeV, 1.5 TeV and 3 TeV, respectively. CLIC uses a two-beam acceleration scheme, in which 12 GHz accelerating structures are powered via a high-current drive beam. For the first stage, an alternative with X-band klystron powering is also considered. CLIC accelerator optimisation, technical developments and system tests have resulted in an increased energy efficiency (power around 170 MW) for the 380 GeV stage, together with a reduced cost estimate at the level of 6 billion CHF. The detector concept has been refined using improved software tools. Significant progress has been made on detector technology developments for the tracking and calorimetry systems. A wide range of CLIC physics studies has been conducted, both through full detector simulations and parametric studies, together providing a broad overview of the CLIC physics potential. Each of the three energy stages adds cornerstones of the full CLIC physics programme, such as Higgs width and couplings, top-quark properties, Higgs self-coupling, direct searches, and many precision electroweak measurements. The interpretation of the combined results gives crucial and accurate insight into new physics, largely complementary to LHC and HL-LHC. The construction of the first CLIC energy stage could start by 2026. First beams would be available by 2035, marking the beginning of a broad CLIC physics programme spanning 25-30 years.

physics.acc-ph↗

arXiv2018

Thermal runaway of metal nano-tips during intense electron emission

When an electron emitting tip is subjected to very high electric fields, plasma forms even under ultra high vacuum conditions. This phenomenon, known as vacuum arc, causes catastrophic surface modifications and constitutes a major limiting factor not only for modern electron sources, but also for many large-scale applications such as particle accelerators, fusion reactors etc. Although vacuum arcs have been studied thoroughly, the physical mechanisms that lead from intense electron emission to plasma ignition are still unclear. In this article, we give insights to the atomic scale processes taking place in metal nanotips under intense field emission conditions. We use multi-scale atomistic simulations that concurrently include field-induced forces, electron emission with finite-size and space-charge effects, Nottingham and Joule heating. We find that when a sufficiently high electric field is applied to the tip, the emission-generated heat partially melts it and the field-induced force elongates and sharpens it. This initiates a positive feedback thermal runaway process, which eventually causes evaporation of large fractions of the tip. The reported mechanism can explain the origin of neutral atoms necessary to initiate plasma, a missing key process required to explain the ignition of a vacuum arc. Our simulations provide a quantitative description of in the conditions leading to runaway, which shall be valuable for both field emission applications and vacuum arc studies.

cond-mat.mtrl-sci↗

arXiv2017

Updated baseline for a staged Compact Linear Collider

The Compact Linear Collider (CLIC) is a multi-TeV high-luminosity linear e+e- collider under development. For an optimal exploitation of its physics potential, CLIC is foreseen to be built and operated in a staged approach with three centre-of-mass energy stages ranging from a few hundred GeV up to 3 TeV. The first stage will focus on precision Standard Model physics, in particular Higgs and top-quark measurements. Subsequent stages will focus on measurements of rare Higgs processes, as well as searches for new physics processes and precision measurements of new states, e.g. states previously discovered at LHC or at CLIC itself. In the 2012 CLIC Conceptual Design Report, a fully optimised 3 TeV collider was presented, while the proposed lower energy stages were not studied to the same level of detail. This report presents an updated baseline staging scenario for CLIC. The scenario is the result of a comprehensive study addressing the performance, cost and power of the CLIC accelerator complex as a function of centre-of-mass energy and it targets optimal physics output based on the current physics landscape. The optimised staging scenario foresees three main centre-of-mass energy stages at 380 GeV, 1.5 TeV and 3 TeV for a full CLIC programme spanning 22 years. For the first stage, an alternative to the CLIC drive beam scheme is presented in which the main linac power is produced using X-band klystrons.

physics.acc-ph↗