arXiv subjects

F. Ducret

Publications and source records attributed to F. Ducret.

12 recordsLinked to original sources

arXiv2026

Euclid preparation. Far-infrared predictions for Euclid galaxy catalogues: cluster, protocluster, and field

The MAMBO mock galaxy catalogue, based on the Millennium Simulation with empirically assigned galaxy properties, provides predictions of FIR fluxes and physical parameters of Euclid-detectable galaxies. Predicted FIR flux distributions confirm that only the brightest Euclid sources will be detectable in existing FIR surveys. We employ stacking to measure the mean dust properties as a function of stellar mass and redshift. We find dust temperatures and infrared luminosities increase with redshift across all mass bins, while dust masses remain roughly constant. FIR number counts from MAMBO show overall good agreement with observations, and the total infrared luminosity function reproduces published estimates across most redshift ranges, extending to z~10. Comparing the Euclid Wide and Deep Surveys, we find that the EDS recovers the total IRLF to fainter luminosities and higher redshifts (up to z~6 in $I_E$), although its detectability falls below 80% at z>4, whereas the EWS becomes strongly incomplete beyond z~2. We also examine the dependence of the IRLF on environment. Schechter fits indicate that the faint-end slope $\alpha$ flattens with redshift for cluster and protocluster galaxies, while remaining approximately constant for field populations. Imposing additional detection limits from Herschel-PACS and SPIRE shows that only the most luminous ($L_{IR}$ > $10^{12.5}$ $L_{\odot}$) galaxies remain detectable at z~4, but the limited MAMBO area (3.14$deg^2$) is inadequate for statistically robust (>3$\sigma$) constraints. Survey areas at least 30 times larger are required. Overall, the MAMBO FIR extension reproduces key number count and IRLF trends, provides realistic predictions for FIR-detected Euclid galaxies, and highlights the importance of synergies with current and future FIR/sub-mm facilities to probe environmental dependence with sufficient depth and area.

astro-ph.GA↗

arXiv2025

Euclid Structural-Thermal-Optical Performance

The Euclid system performance is defined in terms of image quality metrics tuned to the weak gravitational lensing (WL) cosmological probe. WL induces stringent requirements on the shape and stability of the VIS instrument system point spread function (PSF). The PSF is affected by error contributions from the telescope, the focal plane and image motion, and is controlled by a global error budget with error allocations to each contributor. Aims. During spacecraft development, we verified through a structural-thermal-optical performance (STOP) analysis that the built and verified telescope with its spacecraft interface meets the in-orbit steady-state and transient image quality requirements. Methods. For the purposes of the STOP analysis, a detailed finite-element mathematical model was set up and a standard set of test cases, both steady-state and transient, was defined, comprising combinations of worst-case boundary conditions. Results. The STOP analysis addressed the interaction of all spacecraft components in transmitting temperature-induced loads that lead to optical train deformation. The results of the prelaunch analysis demonstrated that temperature-induced optical perturbations will be well below the allowable limits for all permitted observing conditions. During the first year in orbit, we used the STOP analysis predictions to help interpret the measured performance as a function of environmental variables. Unpredicted disturbances were discovered and unexpected sensitivities were revealed. In-orbit temperature variations are small (<300 mK) and so are their effects on the telescope structure, but they are detected in the time histories of the image quality metrics and are a non-negligible factor in the PSF stability budget demanded by the WL science. Taking everything into account, our analysis confirms the excellent overall performance of the telescope.

astro-ph.IM↗

arXiv2025

Euclid preparation. Simulating thousands of Euclid spectroscopic skies

We present two extensive sets of 3500+1000 simulations of dark matter haloes on the past light cone, and two corresponding sets of simulated (`mock') galaxy catalogues that represent the Euclid spectroscopic sample. The simulations were produced with the latest version of the PINOCCHIO code, and provide the largest, public set of simulated skies. Mock galaxy catalogues were obtained by populating haloes with galaxies using an halo occupation distribution (HOD) model extracted from the Flagship galaxy catalogue provided by Euclid Collaboration. The Geppetto set of 3500 simulated skies was obtained by tiling a 1.2 Gpc/h box to cover a light-cone whose sky footprint is a circle of 30 deg radius, for an area of 2763 deg$^2$ and a minimum halo mass of $1.5\times10^{11}$ Msun/h. The relatively small box size makes this set unfit for measuring very large scales. The EuclidLargeBox set consists of 1000 simulations of 3.38 Gpc/h, with the same mass resolution and a footprint that covers half of the sky, excluding the Milky Way zone of avoidance. From this we produced a set of 1000 EuclidLargeMocks on the 30 deg radius footprint, whose comoving volume is fully contained in the simulation box. We validated the two sets of catalogues by analysing number densities, power spectra, and 2-point correlation functions, showing that the Flagship spectroscopic catalogue is consistent with being one of the realisations of the simulated sets, although we noticed small deviations limited to the quadrupole at k>0.2 h/Mpc. We show cosmological parameter inference from these catalogues and demonstrate that using one realisation of EuclidLargeMocks in place of the Flagship mock produces the same posteriors, to within the expected shift given by sample variance. These simulated skies will be used for the galaxy clustering analysis of Euclid's Data Release 1 (DR1).

astro-ph.CO↗

arXiv2025

Euclid preparation. Overview of Euclid infrared detector performance from ground tests

The paper describes the objectives, design and findings of the pre-launch ground characterisation campaigns of the Euclid infrared detectors. The pixel properties, including baseline, bad pixels, quantum efficiency, inter pixel capacitance, quantum efficiency, dark current, readout noise, conversion gain, response nonlinearity, and image persistence were measured and characterised for each pixel. We describe in detail the test flow definition that allows us to derive the pixel properties and we present the data acquisition and data quality check software implemented for this purpose. We also outline the measurement protocols of all the pixel properties presented and we provide a comprehensive overview of the performance of the Euclid infrared detectors as derived after tuning the operating parameters of the detectors. The main conclusion of this work is that the performance of the infrared detectors Euclid meets the requirements. Pixels classified as non-functioning accounted for less than 0.2% of all science pixels. IPC coupling is minimal and crosstalk between adjacent pixels is less than 1% between adjacent pixels. 95% of the pixels show a QE greater than 80% across the entire spectral range of the Euclid mission. The conversion gain is approximately 0.52 ADU/e-, with a variation less than 1% between channels of the same detector. The reset noise is approximately equal to 23 ADU after reference pixels correction. The readout noise of a single frame is approximately 13 $e^-$ while the signal estimator noise is measured at 7 $e^-$ in photometric mode and 9 $e^-$ in spectroscopic acquisition mode. The deviation from linear response at signal levels up to 80 k$e^-$ is less than 5% for 95% of the pixels. Median persistence amplitudes are less than 0.3% of the signal, though persistence exhibits significant spatial variation and differences between detectors.

astro-ph.IM↗

arXiv2025

Euclid: Quick Data Release (Q1) -- Watching ICM-selected galaxy clusters with Euclid eyes -- prospects of Euclid data in the context of large SZ and X-ray based surveys

Galaxy clusters detected through their X-ray emission or Sunyaev--Zeldovich effect (SZE), both produced by the intra-cluster medium (ICM), are key probes in cosmological and astrophysical studies. To maximise the scientific return of such surveys, complementary data are required for cluster confirmation and redshift estimation. This is typically provided by wide-field optical and infrared surveys, which are increasingly challenged by ongoing and future ICM-selected samples. In particular, at high redshifts ($z>1$) probed by upcoming SZE-selected samples, current large surveys may be insufficient for reliable confirmation. Deep, high-resolution infrared surveys like Euclid will thus be essential for confirming most high-redshift clusters. We present an analysis of the first sizeable Euclid dataset (Q1), overlapping with several ICM-selected cluster samples. We apply an adaptation of the MCMF cluster confirmation tool to estimate key properties, including redshift and richness, and to predict Euclid's capabilities for high-redshift cluster confirmation. We find promising performance, particularly at high redshifts, while richness estimates at low redshifts ($z<0.4$) are currently limited by Q1 data quality but should improve with future releases. Using MCMF runs on random lines of sight, we predict that Euclid will confirm clusters at $1<z<2$ as effectively as current optical surveys at $z<0.6$, significantly enhancing high-redshift confirmation. SZE-selected samples will thus greatly benefit from Euclid overlap. Among five known high-$z$ SZE clusters in Q1, we identify the highest-redshift jellyfish galaxy candidate to date, EUCLJ035330.86$-$504347.6 in SPT-CLJ0353$-$5043 ($z=1.32$), two massive star-forming galaxies near ACT-CLJ0350.0$-$4819 ($z=1.46$), and strong lensing features in SPT-CLJ0353$-$5043 and SPT-CLJ0421$-$4845.

astro-ph.CO↗

arXiv2025

Euclid preparation: The NISP spectroscopy channel, on ground performance and calibration

ESA's Euclid cosmology mission relies on the very sensitive and accurately calibrated spectroscopy channel of the Near-Infrared Spectrometer and Photometer (NISP). With three operational grisms in two wavelength intervals, NISP provides diffraction-limited slitless spectroscopy over a field of $0.57$ deg$^2$. A blue grism $\text{BG}_\text{E}$ covers the wavelength range $926$--$1366$\,nm at a spectral resolution $R=440$--$900$ for a $0.5''$ diameter source with a dispersion of $1.24$ nm px$^{-1}$. Two red grisms $\text{RG}_\text{E}$ span $1206$ to $1892$\,nm at $R=550$--$740$ and a dispersion of $1.37$ nm px$^{-1}$. We describe the construction of the grisms as well as the ground testing of the flight model of the NISP instrument where these properties were established.

astro-ph.IM↗

arXiv2025

Performance of the image persistence model for Euclid infrared detectors

Large-format infrared detectors are at the heart of major ground and space-based astronomical instruments, and the HgCdTe HxRG is the most widely used. The Near Infrared Spectrometer and Photometer (NISP) of the ESA's Euclid mission launched in July 2023 hosts 16 H2RG detectors in the focal plane. Their performance relies heavily on the effect of image persistence, which results in residual images that can remain in the detector for a long time contaminating any subsequent observations. Deriving a precise model of image persistence is challenging due to the sensitivity of this effect to observation history going back hours or even days. Nevertheless, persistence removal is a critical part of image processing because it limits the accuracy of the derived cosmological parameters. We will present the empirical model of image persistence derived from ground characterization data, adapted to the Euclid observation sequence and compared with the data obtained during the in-orbit calibrations of the satellite.

astro-ph.IM↗

arXiv2024

Euclid. IV. The NISP Calibration Unit

The near-infrared calibration unit (NI-CU) on board Euclid's Near-Infrared Spectrometer and Photometer (NISP) is the first astronomical calibration lamp based on light-emitting diodes (LEDs) to be operated in space. Euclid is a mission in ESA's Cosmic Vision 2015-2025 framework, to explore the dark universe and provide a next-level characterisation of the nature of gravitation, dark matter, and dark energy. Calibrating photometric and spectrometric measurements of galaxies to better than 1.5% accuracy in a survey homogeneously mapping ~14000 deg^2 of extragalactic sky requires a very detailed characterisation of near-infrared (NIR) detector properties, as well their constant monitoring in flight. To cover two of the main contributions - relative pixel-to-pixel sensitivity and non-linearity characteristics - as well as support other calibration activities, NI-CU was designed to provide spatially approximately homogeneous (<12% variations) and temporally stable illumination (0.1%-0.2% over 1200s) over the NISP detector plane, with minimal power consumption and energy dissipation. NI-CU is covers the spectral range ~[900,1900] nm - at cryo-operating temperature - at 5 fixed independent wavelengths to capture wavelength-dependent behaviour of the detectors, with fluence over a dynamic range of >=100 from ~15 ph s^-1 pixel^-1 to >1500 ph s^-1 pixel^-1. For this functionality, NI-CU is based on LEDs. We describe the rationale behind the decision and design process, describe the challenges in sourcing the right LEDs, as well as the qualification process and lessons learned. We also provide a description of the completed NI-CU, its capabilities and performance as well as its limits. NI-CU has been integrated into NISP and the Euclid satellite, and since Euclid's launch in July 2023 has started supporting survey operations.

astro-ph.IM↗

arXiv2024

Euclid. III. The NISP Instrument

The Near-Infrared Spectrometer and Photometer (NISP) on board the Euclid satellite provides multiband photometry and R>=450 slitless grism spectroscopy in the 950-2020nm wavelength range. In this reference article we illuminate the background of NISP's functional and calibration requirements, describe the instrument's integral components, and provide all its key properties. We also sketch the processes needed to understand how NISP operates and is calibrated, and its technical potentials and limitations. Links to articles providing more details and technical background are included. NISP's 16 HAWAII-2RG (H2RG) detectors with a plate scale of 0.3" pix^-1 deliver a field-of-view of 0.57deg^2. In photo mode, NISP reaches a limiting magnitude of ~24.5AB mag in three photometric exposures of about 100s exposure time, for point sources and with a signal-to-noise ratio (SNR) of 5. For spectroscopy, NISP's point-source sensitivity is a SNR = 3.5 detection of an emission line with flux ~2x10^-16erg/s/cm^2 integrated over two resolution elements of 13.4A, in 3x560s grism exposures at 1.6 mu (redshifted Ha). Our calibration includes on-ground and in-flight characterisation and monitoring of detector baseline, dark current, non-linearity, and sensitivity, to guarantee a relative photometric accuracy of better than 1.5%, and relative spectrophotometry to better than 0.7%. The wavelength calibration must be better than 5A. NISP is the state-of-the-art instrument in the NIR for all science beyond small areas available from HST and JWST - and an enormous advance due to its combination of field size and high throughput of telescope and instrument. During Euclid's 6-year survey covering 14000 deg^2 of extragalactic sky, NISP will be the backbone for determining distances of more than a billion galaxies. Its NIR data will become a rich reference imaging and spectroscopy data set for the coming decades.

astro-ph.IM↗

arXiv2023

Euclid's Near-Infrared Spectrometer and Photometer ready for flight -- review of final performance

ESA's mission Euclid, while undertaking its final integration stage, is fully qualified. Euclid will perform an extragalactic survey ($0<z<2$) by observing in the visible and near-infrared wavelength range. To detect infrared radiation, it is equipped with the Near Infrared Spectrometer and Photometer (NISP) instrument, operating in the 0.9--2 $\mu$m range. In this paper, after introducing the survey strategy, we focus our attention on the NISP Data Processing Unit's Application Software, highlighting the experimental process to obtain the final parametrization of the on-board processing of data produced by the array of 16 Teledyne HAWAII-2RG (HgCdTe) detectors. We report results from the latest ground test campaigns with the flight configuration hardware - complete optical system (Korsh anastigmat telescope), detectors array (0.56 deg$^2$ field of view), and readout systems (16 Digital Control Units and Sidecar ASICs). The performance of the on-board processing is then presented. We also describe a major issue found during the final test phase. We show how the problem was identified and solved thanks to an intensive coordinated effort of an independent review `Tiger' team, lead by ESA, and a team of NISP experts from the Euclid Consortium. An extended PLM level campaign at ambient temperature in Li\`ege and a dedicated test campaign conducted in Marseille on the NISP EQM model eventually confirmed the resolution of the problem. Finally, we report examples of the outstanding spectrometric (using a Blue and two Red Grisms) and photometric performance of the NISP instrument, as derived from the end-to-end payload module test campaign at FOCAL 5 -- CSL; these results include the photometric Point Spread Function (PSF) determination and the spectroscopic dispersion verification.

astro-ph.IM↗

arXiv2022

Euclid Near Infrared Spectrometer and Photometer instrument flight model presentation, performance and ground calibration results summary

The NISP (Near Infrared Spectrometer and Photometer) is one of the two Euclid instruments. It operates in the near-IR spectral region (950-2020nm) as a photometer and spectrometer. The instrument is composed of: a cold (135 K) optomechanical subsystem consisting of a Silicon carbide structure, an optical assembly, a filter wheel mechanism, a grism wheel mechanism, a calibration unit, and a thermal control system, a detection system based on a mosaic of 16 H2RG with their front-end readout electronic, and a warm electronic system (290 K) composed of a data processing / detector control unit and of an instrument control unit that interfaces with the spacecraft via a 1553 bus for command and control and via Spacewire links for science data. This paper presents: the final architecture of the flight model instrument and subsystems, and the performance and the ground calibration measurement done at NISP level and at Euclid Payload Module level at operational cold temperature.

astro-ph.IM↗

arXiv2020

Euclid preparation: VII. Forecast validation for Euclid cosmological probes

The Euclid space telescope will measure the shapes and redshifts of galaxies to reconstruct the expansion history of the Universe and the growth of cosmic structures. Estimation of the expected performance of the experiment, in terms of predicted constraints on cosmological parameters, has so far relied on different methodologies and numerical implementations, developed for different observational probes and for their combination. In this paper we present validated forecasts, that combine both theoretical and observational expertise for different cosmological probes. This is presented to provide the community with reliable numerical codes and methods for Euclid cosmological forecasts. We describe in detail the methodology adopted for Fisher matrix forecasts, applied to galaxy clustering, weak lensing and their combination. We estimate the required accuracy for Euclid forecasts and outline a methodology for their development. We then compare and improve different numerical implementations, reaching uncertainties on the errors of cosmological parameters that are less than the required precision in all cases. Furthermore, we provide details on the validated implementations that can be used by the reader to validate their own codes if required. We present new cosmological forecasts for Euclid. We find that results depend on the specific cosmological model and remaining freedom in each setup, i.e. flat or non-flat spatial cosmologies, or different cuts at nonlinear scales. The validated numerical implementations can now be reliably used for any setup. We present results for an optimistic and a pessimistic choice of such settings. We demonstrate that the impact of cross-correlations is particularly relevant for models beyond a cosmological constant and may allow us to increase the dark energy Figure of Merit by at least a factor of three.

astro-ph.CO↗