arXiv subjects

F. Frassati

Publications and source records attributed to F. Frassati.

14 recordsLinked to original sources

arXiv2026

A view of the evolution of a CME and the associated wave-trains at high spatial and temporal resolution

Context. Studying the kinematic and dynamic evolution of fast eruptive events from the middle to high solar corona is a primary objective of the Metis coronagraph on Solar Orbiter. During perihelion, Metis acquires visible light images at a 20s cadence, reaching a spatial resolution of around 2000 km at 0.28 au. This enables capturing coronal mass ejections (CMEs) and transient structures with unprecedented spatial and temporal resolution. Aims. On October 8-9, 2022, an extensive CME was observed by Metis at 0.3 au (resolution: 4.4 $10^{3}$ km/pixel). We aim to exploit this high resolution to resolve multiple substructures within the CME front, revealing plasma elements with distinct trajectories and speeds to provide a detailed kinematic characterization of the eruption. Methods. A normalization-based running difference algorithm was applied to enhance the complex morphology. Height-time diagrams were used to estimate propagation speeds and frequency variations. A 3D flux rope reconstruction, combined with multi-spacecraft coronagraphs and disk imagers, enabled tracking the CME from its initiation in the lower corona to approximately 5 solar radii. Joint observations with Solar Orbiter EUI-FSI provided insights into the eruption's onset, while Metis captured its development into the middle corona. Results. Metis observations resolve the CME's fine structure and internal plasma motions. The detection of circular, fast-propagating wavefronts (500 km/s, 3 minute period) at the western flank suggests wave excitation and magnetic reconfiguration processes. Multiple interpretations are proposed for these coronal wave trains, including quasi periodic propagating fast modes, offering new insights into wave generation and energy transport in the solar corona.

astro-ph.SR↗

arXiv2025

First detection of acoustic-like flux in the middle solar corona

Waves are thought to play a significant role in the heating of the solar atmosphere and the acceleration of the wind. Among the many types of waves observed in the Sun, the so-called p-modes with a 3 mHz frequency peak dominate the lower atmosphere. In the presence of magnetic fields, these waves can be converted into magnetohydrodynamic modes, which then leak into the corona through magnetic conduits. High-resolution off-limb observations have indeed revealed signatures of ubiquitous and global 3 mHz oscillations in the corona, although limited to low heights and to incompressible modes. We present high-cadence, high-resolution observations of the corona in the range 1.7 - 3.6 solar radii taken in broad-band 580-640 nm visible light by the Metis coronagraph aboard Solar Orbiter. These observations were designed to investigate density fluctuations in the middle corona. The data were acquired over several days in March 2022, October 2022, and for two days in April 2023. We selected representative regions of the corona on three sample dates. Analysis of the data in those regions revealed the presence of periodic density fluctuations. By examining several time-distance diagrams, we determined the main properties (apparent propagation speed, amplitude) of those fluctuations. We also show power spectra in selected locations in order to determine the dominant frequencies. We found wave-like, compressible fluctuations of low amplitude - of the order of 0.1 % of the background - in several large-scale regions in the corona at least up to 2.5 solar radii. We also found that the apparent propagation speeds of these perturbations typically fall in the range 150 - 450 km/s. A power spectrum analysis of time series revealed an excess power in the range 2-7 mHz, often with peaks at 3 or 5 mHz, i.e. in a range consistent with p-mode frequencies of the lower solar atmosphere.

astro-ph.SR↗

arXiv2025

Metis Observations of Alfv\'{e}nic Outflows Driven by Interchange Reconnection in a Pseudostreamer

This study presents observations of a large pseudostreamer solar eruption and, in particular, the post-eruption relaxation phase, as captured by Metis onboard the Solar Orbiter on October 12, 2022, during its perihelion passage. Utilizing total brightness data, we observe the outward propagation of helical features up to 3 solar radii along a radial column that appears to correspond to the stalk of the pseudostreamer. The helical structures persisted for more than 3 hours following a jet-like coronal mass ejection associated with a polar crown prominence eruption. A notable trend is revealed: the inclination of these features decreases as their polar angle and height increase. Additionally, we measured their helix pitch. Despite a 2-minute time cadence limiting direct correspondence among filamentary structures in consecutive frames, we find that the Metis helical structure may be interpreted as a consequence of twist (nonlinear torsional Alfv\'{e}n waves) and plasma liberated by interchange reconnection. A comparison was performed of the helix parameters as outlined by fine-scale outflow features with those obtained from synthetic white-light images derived from the high-resolution magnetohydrodynamics simulation of interchange reconnection in a pseudostreamer topology by Wyper et al. (2022). A remarkable similarity between the simulation-derived images and the observations was found. We conjecture that these Metis observations may represent the upper end in spatial and energy scale of the interchange reconnection process that has been proposed recently as the origin of the Alfv\'{e}nic solar wind.

astro-ph.SR↗

arXiv2024

Study of solar brightness profiles in the 18-26 GHz frequency range with INAF radio telescopes II. Evidence for coronal emission

One of the most important objectives of solar physics is the physical understanding of the solar atmosphere, the structure of which is also described in terms of the density (N) and temperature (T) distributions of the atmospheric matter. Several multi-frequency analyses show that the characteristics of these distributions are still debated, especially for the outer coronal emission. We aim to constrain the T and N distributions of the solar atmosphere through observations in the centimetric radio domain. We employ single-dish observations from two of the INAF radio telescopes at the K-band frequencies (18 - 26 GHz). We investigate the origin of the significant brightness temperature ($T_B$) level that we detected up to the upper corona ($\sim 800$ Mm of altitude with respect to the photospheric solar surface). To probe the physical origin of the atmospheric emission and to constrain instrumental biases, we reproduced the solar signal by convolving specific 2D antenna beam models. The analysis of the solar atmosphere is performed by adopting a physical model that assumes the thermal bremsstrahlung as the emission mechanism, with specific T and N distributions. The modelled $T_B$ profiles are compared with those observed by averaging solar maps obtained during the minimum of solar activity (2018 - 2020). The T and N distributions are compatible (within $25\%$ of uncertainty) with the model up to $\sim 60$ Mm and $\sim 100$ Mm of altitude, respectively. The analysis of the role of the antenna beam pattern on our solar maps proves the physical nature of the atmospheric emission in our images up to the coronal tails seen in our $T_B$ profiles. The challenging analysis of the coronal radio emission at higher altitudes, together with the data from satellite instruments will require further multi-frequency measurements.

astro-ph.SR↗

arXiv2023

Eruptive events with exceptionally bright emission in HI Ly-alpha observed by the Metis coronagraph

Metis, the coronagraph on board Solar Orbiter, provides for the first time coronagraphic imaging in the ultraviolet HI Ly-alpha line and, simultaneously, in polarized visible light, thus providing a host of information on the properties of CMEs and solar eruptions like their overall dynamics, time evolution, mass content, and outflow propagation velocity in the expanding corona. We analyzed in this work six CMEs observed by Metis between April and October 2021, which are characterized by a very strong HI Ly-alpha emission. We studied in particular the morphology, kinematics, and the temporal and radial evolution of the emission of such events, focusing on the brightest UV features. The kinematics of the eruptive events under consideration were studied by determining the height-time profiles of the brightest parts on the Metis plane of the sky. Furthermore, the 3D position in the heliosphere of the CMEs were determined by employing co-temporal images from two other coronagraphs: LASCO/C2 onboard SOHO, and COR2 onboard STEREO-A. Finally, the radiometrically calibrated Metis images of the bright UV features were analyzed to provide estimates of their volume and density. From the kinematics and radiometric analyses, we obtained indications of the temperatures of the bright UV cores of these events. The analysis of these strong UV-emitting features associated with coronal mass ejections demonstrates the capabilities of the current constellation of space coronagraphs, Metis, LASCO/C2, and COR2, in providing a complete characterization of the structure and dynamics of eruptive events in their propagation phase from their inception up to several solar radii. Furthermore, we show how the unique capabilities of the Metis instrument to observe these events in both HI Ly-alpha line and polarized VL radiation allow plasma diagnostics on the thermal state of these events.

astro-ph.SR↗

arXiv2023

In-flight validation of Metis Visible-light Polarimeter Coronagraph on board Solar Orbiter

Context. The Metis coronagraph is one of the remote-sensing instruments of the ESA/NASA Solar Orbiter mission. Metis is aimed at the study of the solar atmosphere and solar wind by simultaneously acquiring images of the solar corona at two different wavelengths; visible-light (VL) within a band ranging from 580 nm to 640 nm, and in the HI Ly-alpha 121.6 +/- 10 nm ultraviolet (UV) light. The visible-light channel includes a polarimeter with electro-optically modulating Liquid Crystal Variable Retarders (LCVRs) to measure the linearly polarized brightness of the K-corona to derive the electron density. Aims. In this paper, we present the first in-flight validation results of the Metis polarimetric channel together with a comparison to the on-ground calibrations. It is the validation of the first use in deep space (with hard radiation environment) of an electro-optical device: a liquid crystal-based polarimeter. Methods. We used the orientation of the K-corona's linear polarization vector during the spacecraft roll maneuvers for the in-flight calibration. Results. The first in-flight validation of the Metis coronagraph on-board Solar Orbiter shows a good agreement with the on-ground measurements. It confirms the expected visible-light channel polarimetric performance. A final comparison between the first pB obtained by Metis with the polarized brightness (pB) obtained by the space-based coronagraph LASCO and the ground-based coronagraph KCor shows the consistency of the Metis calibrated results.

astro-ph.SR↗

arXiv2022

Three-dimensional reconstruction of type U radio bursts: a novel remote sensing approach for coronal loops

Type U radio bursts are impulsive coherent radio emissions produced by the Sun that indicate the presence of subrelativistic electron beams propagating along magnetic loops in the solar corona. In this work, we present the analysis of a type U radio burst that was exceptionally imaged on 2011 March 22 by the Nan\c{c}ay Radioheliograph (NRH) at three different frequencies (298.7, 327.0, and 360.8 MHz). Using a novel modelling approach, we show for the first time that the use of high-resolution radio heliograph images of type U radio bursts can be sufficient to both accurately reconstruct the 3D morphology of coronal loops (without recurring to triangulation techniques) and to fully constrain their physical parameters. At the same time, we can obtain unique information on the dynamics of the accelerated electron beams, which provides important clues as to the plasma mechanisms involved in their acceleration and as to why type U radio bursts are not observed as frequently as type III radio bursts. We finally present plausible explanations for a problematic aspect related to the apparent lack of association between the modeled loop as inferred from radio images and the extreme-ultraviolet (EUV) structures observed from space in the same coronal region

astro-ph.SR↗

arXiv2022

A Coronal Mass Ejection followed by a prominence eruption and a plasma blob as observed by Solar Orbiter

On February 12, 2021 two subsequent eruptions occurred above the West limb, as seen along the Sun-Earth line. The first event was a typical slow Coronal Mass Ejection (CME), followed $\sim 7$ hours later by a smaller and collimated prominence eruption, originating Southward with respect to the CME, followed by a plasma blob. These events were observed not only by SOHO and STEREO-A missions, but also by the suite of remote sensing instruments on-board Solar Orbiter (SolO). This work shows how data acquired by the Full Sun Imager (FSI), Metis coronagraph, and Heliospheric Imager (SoloHI) from the SolO perspective can be combined to study the eruptions and the different source regions. Moreover, we show how Metis data can be analyzed to provide new information about solar eruptions. Different 3D reconstruction methods were applied to the data acquired by different spacecraft including remote sensing instruments on-board SolO. Images acquired by both Metis channels in the Visible Light (VL) and H I Lyman$-\alpha$ line (UV) were combined to derive physical information on the expanding plasma. The polarization ratio technique was also applied for the first time to the Metis images acquired in the VL channel. The two eruptions were followed in 3D from their source region to their expansion in the intermediate corona. Thanks to the combination of VL and UV Metis data, the formation of a post-CME Current Sheet (CS) was followed for the first time in the intermediate corona. The plasma temperature gradient across a post-CME blob propagating along the CS was also measured for the first time. Application of the polarization ratio technique to Metis data shows that, thanks to the combination of four different polarization measurements, the errors are reduced by $\sim 5-7$\%, thus better constraining the 3D distribution of plasma.

astro-ph.SR↗

arXiv2021

Radio evidence for a shock wave reflected by a coronal hole

We report the first unambiguous observational evidence in the radio range of the reflection of a coronal shock wave at the boundary of a coronal hole. The event occurred above an active region located at the northwest limb of the Sun and was characterized by an eruptive prominence and an extreme-ultraviolet (EUV) wave steepening into a shock. The EUV observations acquired by the Atmospheric Imaging Assembly (AIA) instrument on board the Solar Dynamics Observatory(SDO) and the Extreme Ultraviolet Imager (EUVI) instrument on board the Solar TErrestrial RElations Observatory(STEREO-A) were used to track the development of the EUV front in the inner corona. Metric type II radio emission, a distinguishing feature of shock waves propagating in the inner corona, was simultaneously recorded by ground-based radio spectrometers. The radio dynamic spectra displayed an unusual reversal of the type II emission lanes, together with type III-like herringbone emission, indicating shock-accelerated electron beams. Combined analysis of imaging data from the two space-based EUV instruments and the Nancay Radioheliograph (NRH) evidences that the reverse-drifting typeiiemission was produced at the intersection of the shock front, reflected at a coronal hole boundary, with an intervening low-Alfvén-speed region characterized by an open field configuration. We also provide an outstanding data-driven reconstruction of the spatiotemporal evolution in the inner corona of the shock-accelerated electron beams produced by the reflected shock.

astro-ph.SR↗

arXiv2021

First light observations of the solar wind in the outer corona with the Metis coronagraph

The investigation of the wind in the solar corona initiated with the observations of the resonantly scattered UV emission of the coronal plasma obtained with UVCS-SOHO, designed to measure the wind outflow speed by applying the Doppler dimming diagnostics. Metis on Solar Orbiter complements the UVCS spectroscopic observations, performed during solar activity cycle 23, by simultaneously imaging the polarized visible light and the HI Ly-alpha corona in order to obtain high-spatial and temporal resolution maps of the outward velocity of the continuously expanding solar atmosphere. The Metis observations, on May 15, 2020, provide the first HI Ly-alpha images of the extended corona and the first instantaneous map of the speed of the coronal plasma outflows during the minimum of solar activity and allow us to identify the layer where the slow wind flow is observed. The polarized visible light (580-640 nm), and the UV HI Ly-alpha (121.6 nm) coronal emissions, obtained with the two Metis channels, are combined in order to measure the dimming of the UV emission relative to a static corona. This effect is caused by the outward motion of the coronal plasma along the direction of incidence of the chromospheric photons on the coronal neutral hydrogen. The plasma outflow velocity is then derived as a function of the measured Doppler dimming. The static corona UV emission is simulated on the basis of the plasma electron density inferred from the polarized visible light. This study leads to the identification, in the velocity maps of the solar corona, of the high-density layer about +/-10 deg wide, centered on the extension of a quiet equatorial streamer present at the East limb where the slowest wind flows at about (160 +/- 18) km/s from 4 Rs to 6 Rs. Beyond the boundaries of the high-density layer, the wind velocity rapidly increases, marking the transition between slow and fast wind in the corona.

astro-ph.SR↗

arXiv2021

Cosmic-ray flux predictions and observations for and with Metis on board Solar Orbiter

The Metis coronagraph is one of the remote sensing instruments hosted on board the ESA/NASA Solar Orbiter mission. Metis is devoted to carry out the first simultaneous imaging of the solar corona in both visible light (VL) and ultraviolet (UV). High-energy particles penetrate spacecraft materials and may limit the performance of on-board instruments. A study of galactic cosmic-ray (GCR) tracks observed in the first VL images gathered by Metis during the commissioning phase for a total of 60 seconds of exposure time is presented here. A similar analysis is planned for the UV channel. A prediction of the GCR flux up to hundreds of GeV is made here for the first part of the Solar Orbiter mission to study the Metis coronagraph performance. GCR model predictions are compared to observations gathered on board Solar Orbiter by the EPD/HET experiment in the range 10 MeV-100 MeV in the summer 2020 and with previous measurements. Estimated cosmic-ray fluxes above 70 MeV n$^{-1}$ have been also parameterized and used for Monte Carlo simulations aiming at reproducing the cosmic-ray track observations in the Metis coronagraph VL images. The same parameterizations can also be used to study the performance of other detectors. By comparing observations of cosmic-ray tracks in the Metis VL images with FLUKA Monte Carlo simulations of cosmic-ray interactions in the VL detector, it is found that cosmic rays fire a fraction of the order of 10$^{-4}$ of the whole image pixel sample. Therefore, cosmic rays do not affect sensibly the quality of Metis VL images. It is also found that the overall efficiency for cosmic-ray identification in the Metis VL images is approximately equal to the contribution of Z$>$2 particles. As a result, the Metis coronagraph may play the role of a proton monitor for long-term GCR variations during the overall mission duration.

astro-ph.IM↗

arXiv2021

SWELTO -- Space WEather Laboratory in Turin Observatory

SWELTO -- Space WEather Laboratory in Turin Observatory is a conceptual framework where new ideas for the analysis of space-based and ground-based data are developed and tested. The input data are (but not limited to) remote sensing observations (EUV images of the solar disk, Visible Light coronagraphic images, radio dynamic spectra, etc...), in situ plasma measurements (interplanetary plasma density, velocity, magnetic field, etc...), as well as measurements acquired by local sensors and detectors (radio antenna, fluxgate magnetometer, full-sky cameras, located in OATo). The output products are automatic identification, tracking, and monitoring of solar stationary and dynamic features near the Sun (coronal holes, active regions, coronal mass ejections, etc...), and in the interplanetary medium (shocks, plasmoids, corotating interaction regions, etc...), as well as reconstructions of the interplanetary medium where solar disturbances may propagate from the Sun to the Earth and beyond. These are based both on empirical models and numerical MHD simulations. The aim of SWELTO is not only to test new data analysis methods for future application for Space Weather monitoring and prediction purposes, but also to procure, test and deploy new ground-based instrumentation to monitor the ionospheric and geomagnetic responses to solar activity. Moreover, people involved in SWELTO are active in outreach to disseminate the topics related with Space Weather to students and the general public.

astro-ph.SR↗

arXiv2019

Three-dimensional reconstruction of CME-driven shock-streamer interaction from radio and EUV observations: a different take on the diagnostics of coronal magnetic fields

On 2014 October 30, a band-splitted type II radio burst associated with a coronal mass ejection (CME) observed by the Atmospheric Imaging Assembly (AIA) on board the Solar Dynamic Observatory (SDO) occurred over the southeast limb of the Sun. The fast expansion in all directions of the plasma front acted as a piston and drove a spherical fast shock ahead of it, whose outward progression was traced by simultaneous images obtained with the Nançay Radioheliograph (NRH). The geometry of the CME/shock event was recovered through 3D modeling, given the absence of concomitant stereoscopic observations, and assuming that the band-splitted type II burst was emitted at the intersection of the shock surface with two adjacent low-Alfven speed coronal streamers. From the derived spatiotemporal evolution of the standoff distance between shock and CME leading edge, we were finally able to infer the magnetic field strength $B$ in the inner corona. A simple radial profile of the form $B(r) = (12.6 \pm 2.5) r^{-4}$ nicely fits our results, together with previous estimates, in the range $r = 1.1-2.0$ solar radii.

astro-ph.SR↗

arXiv2013

New algorithm for footstep localization using seismic sensors in an indoor environment

In this study, we consider the use of seismic sensors for footstep localization in indoor environments. A popular strategy of localization is to use the measured differences in arrival times of source signals at multiple pairs of receivers. In the literature, most algorithms that are based on time differences of arrival (TDOA) assume that the propagation velocity is a constant as a function of the source position, which is valid for air propagation or even for narrow band signals. However a bounded medium such as a concrete slab (encountered in indoor environement) is usually dispersive and damped. In this study, we demonstrate that under such conditions, the concrete slab can be assimilated to a thin plate; considering a Kelvin-Voigt damping model, we introduce the notion of {\em perceived propagation velocity}, which decreases when the source-sensor distance increases. This peculiar behaviour precludes any possibility to rely on existing localization methods in indoor environment. Therefore, a new localization algorithm that is adapted to a damped and dispersive medium is proposed, using only on the sign of the measured TDOA (SO-TDOA). A simulation and some experimental results are included, to define the performance of this SO-TDOA algorithm.

cs.CE↗