arXiv subjects

F. Joseph Heremans

Publications and source records attributed to F. Joseph Heremans.

At least 55 records · Page 3Linked to original sources

arXiv2022

Purcell enhancement of erbium ions in TiO$_{2}$ on silicon nanocavities

Isolated solid-state atomic defects with telecom optical transitions are ideal quantum photon emitters and spin qubits for applications in long-distance quantum communication networks. Prototypical telecom defects such as erbium suffer from poor photon emission rates, requiring photonic enhancement using resonant optical cavities. Many of the traditional hosts for erbium ions are not amenable to direct incorporation with existing integrated photonics platforms, limiting scalable fabrication of qubit-based devices. Here we present a scalable approach towards CMOS-compatible telecom qubits by using erbium-doped titanium dioxide thin films grown atop silicon-on-insulator substrates. From this heterostructure, we have fabricated one-dimensional photonic crystal cavities demonstrating quality factors in excess of $5\times10^{4}$ and corresponding Purcell-enhanced optical emission rates of the erbium ensembles in excess of 200. This easily fabricated materials platform represents an important step towards realizing telecom quantum memories in a scalable qubit architecture compatible with mature silicon technologies.

cond-mat.mtrl-sci↗

arXiv2022

Development of a Scalable Quantum Memory Platform -- Materials Science of Erbium-Doped TiO$_2$ Thin Films on Silicon

Rare-earth ions (REI) have emerged as an attractive candidate for solid-state qubits, particularly as a quantum memory. Their 4f-4f transitions are shielded by filled 5s and 5p orbitals, offering a degree of protection from external electric fields. Embedded within a thin film oxide host, REIs could enable a qubit platform with significant memory capabilities. Furthermore, a silicon-compatible thin film form factor would enable the use of standard semiconductor fabrication processes to achieve chip-based integrability and scalability for functional quantum networks. Towards this goal, we have carried out optical and microstructural studies of erbium-doped polycrystalline and epitaxial TiO$_2$ thin films on Si (100), r-sapphire, and SrTiO$_3$ (100). We observe that the inhomogeneous optical linewidth of the Er photoluminescence is comparable or better for polycrystalline Er:TiO$_2$(grown on Si) in comparison to single crystal epitaxial films on sapphire or SrTiO$_3$, implying a relative insensitivity to extended defects. We investigated the effect of the film/substrate and film/air interface and found that the inhomogeneous linewidth and spectral diffusion can be significantly improved via bottom buffer and top capping layers of undoped TiO$_2$. Using such approaches, we obtain inhomogeneous linewidths of 5.2 GHz and spectral diffusion of 180 MHz in Er:TiO$_2$ /Si(100) films and have demonstrated the engineerability of quantum-relevant properties in these thin films.

cond-mat.mtrl-sci↗

arXiv2021

Tunable and Transferable Diamond Membranes for Integrated Quantum Technologies

Color centers in diamond are widely explored as qubits in quantum technologies. However, challenges remain in the effective and efficient integration of these diamond-hosted qubits in device heterostructures. Here, nanoscale-thick uniform diamond membranes are synthesized via "smart-cut" and isotopically (12C) purified overgrowth. These membranes have tunable thicknesses (demonstrated 50 nm to 250 nm), are deterministically transferable, have bilaterally atomically flat surfaces (Rq <= 0.3 nm), and bulk-diamond-like crystallinity. Color centers are synthesized via both implantation and in-situ overgrowth incorporation. Within 110 nm thick membranes, individual germanium-vacancy (GeV-) centers exhibit stable photoluminescence at 5.4 K and average optical transition linewidths as low as 125 MHz. The room temperature spin coherence of individual nitrogen-vacancy (NV-) centers shows Ramsey spin dephasing times (T2*) and Hahn echo times (T2) as long as 150 us and 400 us, respectively. This platform enables the straightforward integration of diamond membranes that host coherent color centers into quantum technologies.

physics.app-ph↗

arXiv2021

Parasitic erbium photoluminescence in commercial telecom fiber optical components

Noiseless optical components are critical for applications ranging from metrology to quantum communication. Here we characterize several commercial telecom C-band fiber components for parasitic noise using a tunable laser. We observe the spectral signature of trace concentrations of erbium in all devices from the underlying optical crystals including YVO4, LiNbO3, TeO2 and AMTIR glass. Due to the long erbium lifetime, these signals are challenging to mitigate at the single photon level in the telecom range, and suggests the need for higher purity optical crystals.

physics.optics↗

arXiv2021

Photoluminescence spectra of point defects in semiconductors: validation of first principles calculations

Optically and magnetically active point defects in semiconductors are interesting platforms for the development of solid-state quantum technologies. Their optical properties are usually probed by measuring photoluminescence spectra, which provide information on excitation energies and on the interaction of electrons with lattice vibrations. We present a combined computational and experimental study of photoluminescence spectra of defects in diamond and SiC, aimed at assessing the validity of theoretical and numerical approximations used in first principles calculations, including the use of the Franck-Condon principle and the displaced harmonic oscillator approximation. We focus on prototypical examples of solid-state qubits, the divacancy centers in SiC and the nitrogen-vacancy in diamond, and we report computed photoluminescence spectra as a function of temperature that are in very good agreement with the measured ones. As expected we find that the use of hybrid functionals leads to more accurate results than semilocal functionals. Interestingly our calculations show that constrained density functional theory (CDFT) and time-dependent hybrid DFT perform equally well in describing the excited state potential energy surface of triplet states; our findings indicate that CDFT, a relatively cheap computational approach, is sufficiently accurate for the calculations of photoluminescence spectra of the defects studied here. Finally, we find that only by correcting for finite-size effects and extrapolating to the dilute limit, one can obtain a good agreement between theory and experiment. Our results provide a detailed validation protocol of first principles calculations of photoluminescence spectra, necessary both for the interpretation of experiments and for robust predictions of the electronic properties of point defects in semiconductors.

cond-mat.mtrl-sci↗

arXiv2021

Relaxation of a single defect spin by the low-frequency gyrotropic mode of a magnetic vortex

We excite the gyrotropic mode of a magnetic vortex and observe the resulting effect on the spin state of a nearby nitrogen-vacancy (NV) defect in diamond. Thin permalloy disks fabricated on a diamond sample are magnetized in a vortex state in which the magnetization curls around a central core. The magnetization dynamics of this configuration are described by a discrete spectrum of confined magnon modes, as well as a low-frequency gyrotropic mode in which the vortex core precesses about its equilibrium position. Despite the spin transition frequencies being far-detuned from the modes of the ferromagnet, we observe enhanced relaxation of the NV spin when driving the gyrotropic mode. Moreover, we map the spatial dependence of the interaction between the vortex and the spin by translating the vortex core within the disk with an applied magnetic field, resulting in steplike motion as the vortex is pinned and de-pinned. The strong spin relaxation is observed when the vortex core is within approximately 250 nm of the NV center defect. We attribute this effect to the higher frequencies in the spectrum of the magnetic fringe field arising from the soliton-like nature of the gyrotropic mode when driven with sufficiently large amplitude.

cond-mat.mes-hall↗

arXiv2021

Generalized scaling of spin qubit coherence in over 12,000 host materials

Spin defect centers with long quantum coherence times ($T_2$) are key solid-state platforms for a variety of quantum applications. Recently, cluster correlation expansion (CCE) techniques have emerged as a powerful tool to simulate the $T_2$ of defect electron spins in these solid-state systems with good accuracy. Here, based on CCE, we uncover an algebraic expression for $T_2$ generalized for host compounds with dilute nuclear spin baths, which enables a quantitative and comprehensive materials exploration with a near instantaneous estimate of the coherence. We investigate more than 12,000 host compounds at natural isotopic abundance, and find that silicon carbide (SiC), a prominent widegap semiconductor for quantum applications, possesses the longest coherence times among widegap non-chalcogenides. In addition, more than 700 chalcogenides are shown to possess a longer $T_2$ than SiC. We suggest new potential host compounds with promisingly long $T_2$ up to 47 ms, and pave the way to explore unprecedented functional materials for quantum applications.

quant-ph↗

arXiv2020

Qubit guidelines for solid-state spin defects

Defects with associated electron and nuclear spins in solid-state materials have a long history relevant to quantum information science going back to the first spin echo experiments with silicon dopants in the 1950s. Since the turn of the century, the field has rapidly spread to a vast array of defects and host crystals applicable to quantum communication, sensing, and computing. From simple spin resonance to long-distance remote entanglement, the complexity of working with spin defects is fast advancing, and requires an in-depth understanding of their spin, optical, charge, and material properties in this modern context. This is especially critical for discovering new relevant systems dedicated to specific quantum applications. In this review, we therefore expand upon all the key components with an emphasis on the properties of defects and the host material, on engineering opportunities and other pathways for improvement. Finally, this review aims to be as defect and material agnostic as possible, with some emphasis on optical emitters, providing a broad guideline for the field of solid-state spin defects for quantum information.

quant-ph↗

arXiv2020

High-Q Nanophotonic Resonators on Diamond Membranes using Templated Atomic Layer Deposition of TiO2

Integrating solid-state quantum emitters with nanophotonic resonators is essential for efficient spin-photon interfacing and optical networking applications. While diamond color centers have proven to be excellent candidates for emerging quantum technologies, their integration with optical resonators remains challenging. Conventional approaches based on etching resonators into diamond often negatively impact color center performance and offer low device yield. Here, we developed an integrated photonics platform based on templated atomic layer deposition of TiO2 on diamond membranes. Our fabrication method yields high-performance nanophotonic devices while avoiding etching wavelength-scale features into diamond. Moreover, this technique generates highly reproducible optical resonances and can be iterated on individual diamond samples, a unique processing advantage. Our approach is suitable for a broad range of both wavelengths and substrates and can enable high-cooperativity interfacing between cavity photons and coherent defects in diamond or silicon carbide, rare earth ions, or other material systems.

quant-ph↗

arXiv2019

Coherent control and high-fidelity readout of chromium ions in commercial silicon carbide

Transition metal ions provide a rich set of optically active defect spins in wide bandgap semiconductors. Chromium (Cr4+) in silicon-carbide (SiC) produces a spin-1 ground state with a narrow, spectrally isolated, spin-selective, near-telecom optical interface. However, previous studies were hindered by material quality resulting in limited coherent control. In this work, we implant Cr into commercial 4H-SiC and show optimal defect activation after annealing above 1600 C. We measure an ensemble optical hole linewidth of 31 MHz, an order of magnitude improvement compared to as-grown samples. An in-depth exploration of optical and spin dynamics reveals efficient spin polarization, coherent control, and readout with high fidelity (79%). We report T1 times greater than 1 second at cryogenic temperatures (15 K) with a T2* = 317 nanoseconds and a T2 = 81 microseconds, where spin dephasing times are currently limited by spin-spin interactions within the defect ensemble. Our results demonstrate the potential of Cr4+ in SiC as an extrinsic, optically active spin qubit.

quant-ph↗

arXiv2019

Vanadium spin qubits as telecom quantum emitters in silicon carbide

Solid state quantum emitters with spin registers are promising platforms for quantum communication, yet few emit in the narrow telecom band necessary for low-loss fiber networks. Here we create and isolate near-surface single vanadium dopants in silicon carbide (SiC) with stable and narrow emission in the O-band (1278-1388 nm), with brightness allowing cavity-free detection in a wafer-scale CMOS-compatible material. In vanadium ensembles, we characterize the complex d1 orbital physics in all five available sites in 4H-SiC and 6H-SiC. The optical transitions are sensitive to mass shifts from local silicon and carbon isotopes, enabling optically resolved nuclear spin registers. Optically detected magnetic resonance in the ground and excited orbital states reveals a variety of hyperfine interactions with the vanadium nuclear spin and clock transitions for quantum memories. Finally, we demonstrate coherent quantum control of the spin state. These results provide a path for telecom emitters in the solid-state for quantum applications.

quant-ph↗

arXiv2019

General approaches for shear-correcting coordinate transformations in Bragg coherent diffraction imaging: Part 1

In this two-part article series we provide a generalized description of the scattering geometry of Bragg coherent diffraction imaging (BCDI) experiments, the shear distortion effects inherent to the resulting three-dimensional (3D) image from current phase retrieval methods and strategies to mitigate this distortion. In this Part I, we derive in general terms the real-space coordinate transformation to correct this shear, which originates in the more fundamental relationship between the representations of mutually conjugate 3D spaces. Such a transformation, applied as a final post-processing step following phase retrieval, is crucial for arriving at an un-distorted and physically meaningful image of the 3D scatterer. As the relevance of BCDI grows in the field of materials characterization, we take this opportunity to generalize the available sparse literature that addresses the geometric theory of BCDI and the subsequent analysis methods. This aspect, specific to coherent Bragg diffraction and absent in two-dimensional transmission CDI experiments, gains particular importance concerning spatially-resolved characterization of 3D crystalline materials in a realiable, non-destructive manner. These articles describe this theory, from the diffraction in Bragg geometry, to the corrections needed to obtain a properly rendered digital image of the 3D scatterer. Part I provides the experimental BCDI communitcy with the theoretical underpinnings of the 3D real-space distortions in the phase-retrieved object, along with the necessary post-retrieval correction method. Part II builds upon the geometric theory developed in Part I with the formalism to correct the shear distortions directly on an orthogonal grid within the phase retrieval algorithm itself, allowing more physically realistic constraints to be applied.

physics.ins-det↗

arXiv2018

Probing spin-phonon interactions in silicon carbide with Gaussian acoustics

Hybrid spin-mechanical systems provide a platform for integrating quantum registers and transducers. Efficient creation and control of such systems require a comprehensive understanding of the individual spin and mechanical components as well as their mutual interactions. Point defects in silicon carbide (SiC) offer long-lived, optically addressable spin registers in a wafer-scale material with low acoustic losses, making them natural candidates for integration with high quality factor mechanical resonators. Here, we show Gaussian focusing of a surface acoustic wave in SiC, characterized by a novel stroboscopic X-ray diffraction imaging technique, which delivers direct, strain amplitude information at nanoscale spatial resolution. Using ab initio calculations, we provide a more complete picture of spin-strain coupling for various defects in SiC with C3v symmetry. This reveals the importance of shear for future device engineering and enhanced spin-mechanical coupling. We demonstrate all-optical detection of acoustic paramagnetic resonance without microwave magnetic fields, relevant to sensing applications. Finally, we show mechanically driven Autler-Townes splittings and magnetically forbidden Rabi oscillations. These results offer a basis for full strain control of three-level spin systems.

quant-ph↗

arXiv2018

Microscale resolution thermal mapping using a flexible platform of patterned quantum sensors

Temperature sensors with micro- and nanoscale spatial resolution have long been explored for their potential to investigate the details of physical systems at an unprecedented scale. In particular, the rapid miniaturization of transistor technology, with the associated steep boost in power density, calls for sensors that accurately monitor heating distributions. Here, we report on a simple and scalable fabrication approach, based on directed self-assembly and transfer printing techniques, to construct arrays of nanodiamonds containing temperature sensitive fluorescent spin defects. The nanoparticles are embedded within a low thermal conductivity matrix that allows for repeated use on a wide range of systems with minimal spurious effects. Additionally, we demonstrate access to a wide spectrum of array parameters ranging from sparser single particle arrays to denser devices with approximately 100 % yield and stronger photoluminescence signal, ideal for temperature measurements. With these we experimentally reconstruct the temperature map of an operating coplanar waveguide to confirm the accuracy of these platforms.

physics.app-ph↗

arXiv2017

Holonomic Quantum Control by Coherent Optical Excitation in Diamond

Although geometric phases in quantum evolution were historically overlooked, their active control now stimulates strategies for constructing robust quantum technologies. Here, we demonstrate arbitrary single-qubit holonomic gates from a single cycle of non-adiabatic evolution, eliminating the need to concatenate two separate cycles. Our method varies the amplitude, phase, and detuning of a two-tone optical field to control the non-Abelian geometric phase acquired by a nitrogen-vacancy center in diamond over a coherent excitation cycle. We demonstrate the enhanced robustness of detuned gates to excited-state decoherence and provide insights for optimizing fast holonomic control in dissipative quantum systems.

quant-ph↗

arXiv2017

Optical charge state control of spin defects in 4H-SiC

Defects in silicon carbide (SiC) have emerged as a favorable platform for optically-active spin-based quantum technologies. Spin qubits exist in specific charge states of these defects, where the ability to control these states can provide enhanced spin-dependent readout and long-term charge stability of the qubits. We investigate this charge state control for two major spin qubits in 4H-SiC, the divacancy (VV) and silicon vacancy (Vsi), obtaining bidirectional optical charge conversion between the bright and dark states of these defects. We measure increased photoluminescence from VV ensembles by up to three orders of magnitude using near-ultraviolet excitation, depending on the substrate, and without degrading the electron spin coherence time. This charge conversion remains stable for hours at cryogenic temperatures, allowing spatial and persistent patterning of the relative charge state populations. We develop a comprehensive model of the defects and optical processes involved, offering a strong basis to improve material design and to develop quantum applications in SiC.

cond-mat.mes-hall↗

arXiv2017

Hybrid nanodiamond-YIG systems for efficient quantum information processing and nanoscale sensing

The nitrogen-vacancy (NV) center in diamond has been extensively studied in recent years for its remarkable quantum coherence properties that make it an ideal candidate for room temperature quantum computing and quantum sensing schemes. However, these schemes rely on spin-spin dipolar interactions, which require the NV centers to be within a few nanometers from each other while still separately addressable, or to be in close proximity of the diamond surface, where their coherence properties significantly degrade. Here we demonstrate a method for overcoming these limitations using a hybrid yttrium iron garnet (YIG)-nanodiamond quantum system constructed with the help of directed assembly and transfer printing techniques. We show that YIG spin-waves can amplify the oscillating field of a microwave source by more than two orders of magnitude and efficiently mediate its coherent interactions with an NV center ensemble. These results demonstrate that spin-waves in ferromagnets can be used as quantum buses for enhanced, long-range qubit interactions, paving the way to ultra-efficient manipulation and coupling of solid state defects in hybrid quantum networks and sensing devices.

quant-ph↗

arXiv2016

Accelerated quantum control using superadiabatic dynamics in a solid-state lambda system

Adiabatic evolutions find widespread utility in applications to quantum state engineering, geometric quantum computation, and quantum simulation. Although offering robustness to experimental imperfections, adiabatic processes are susceptible to decoherence due to their long evolution time. A general strategy termed "shortcuts to adiabaticity" (STA) aims to remedy this vulnerability by designing fast dynamics to reproduce the results of slow, adiabatic evolutions. Here, we implement a novel STA technique known as "superadiabatic transitionless driving" (SATD) to speed up stimulated Raman adiabatic passage (STIRAP) in a solid-state lambda (Λ) system. Utilizing optical transitions to a dissipative excited state in the nitrogen-vacancy (NV) center in diamond, we demonstrate the accelerated performance of different shortcut trajectories for population transfer and for the initialization and transfer of coherent superpositions. We reveal that SATD protocols exhibit robustness to dissipation and experimental uncertainty, and can be optimized when these effects are present. These results motivate STA as a promising tool for controlling open quantum systems comprising individual or hybrid nanomechanical, superconducting, and photonic elements in the solid state.

cond-mat.mes-hall↗