arXiv subjects

F. K. Dejene

Publications and source records attributed to F. K. Dejene.

13 recordsLinked to original sources

arXiv2023

Flux-pinning mediated superconducting diode effect in the NbSe$_2$/CrGeTe$_3$ heterostructure

In ferromagnet/superconductor bilayer systems, dipolar fields from the ferromagnet can create asymmetric energy barriers for the formation and dynamics of vortices through flux pinning. Conversely, the flux emanating from vortices can pin the domain walls of the ferromagnet, thereby creating asymmetric critical currents. Here, we report the observation of a superconducting diode effect in a NbSe$_2$/CrGeTe$_3$ van der Waals heterostructure in which the magnetic domains of CrGeTe$_3$ control the Abrikosov vortex dynamics in NbSe$_2$. In addition to extrinsic vortex pinning mechanisms at the edges of NbSe$_2$, flux-pinning-induced bulk pinning of vortices can alter the critical current. This asymmetry can thus be explained by considering the combined effect of this bulk pinning mechanism along with the vortex tilting induced by the Lorentz force from the transport current in the NbSe$_2$/CrGeTe$_3$ heterostructure. We also provide evidence of critical current modulation by flux pinning depending on the history of the field setting procedure. Our results suggest a method of controlling the efficiency of the superconducting diode effect in magnetically coupled van der Waals superconductors, where dipolar fields generated by the magnetic layer can be used to modulate the dynamics of the superconducting vortices in the superconductors.

cond-mat.supr-con↗

arXiv2018

Temperature dependence of the effective spin-mixing conductance probed with lateral non-local spin valves

We report the temperature dependence of the effective spin-mixing conductance between a normal metal (aluminium, Al) and a magnetic insulator ($\text{Y}_3\text{Fe}_5\text{O}_{12}$, YIG). Non-local spin valve devices, using Al as the spin transport channel, were fabricated on top of YIG and SiO$_2$ substrates. By comparing the spin relaxation lengths in the Al channel on the two different substrates, we calculate the effective spin-mixing conductance ($G_\text{s}$) to be $3.3\times10^{12}$~$Ω^{-1}\text{m}^{-2}$ at 293~K for the Al/YIG interface. A decrease of up to 84\% in $G_\text{s}$ is observed when the temperature ($T$) is decreased from 293~K to 4.2~K, with $G_\text{s}$ scaling with $(T/T_\text{c})^{3/2}$. The real part of the spin-mixing conductance ($G_\text{r}\approx 5.7\times10^{13}~ Ω^{-1}\text{m}^{-2}$), calculated from the experimentally obtained $G_\text{s}$, is found to be approximately independent of the temperature. We evidence a hitherto unrecognized underestimation of $G_\text{r}$ extracted from the modulation of the spin signal by rotating the magnetization direction of YIG with respect to the spin accumulation direction in the Al channel, which is found to be 50 times smaller than the calculated value.

cond-mat.mes-hall↗

arXiv2016

Anisotropic Hanle lineshape via anisotropic magnetothermoelectric phenomena

We observe anisotropic Hanle lineshape with unequal in-plane and out-of-plane non-local signals for spin precession measurements carried out on lateral metallic spin valves with transparent interfaces. The conventional interpretation for this anisotropy corresponds to unequal spin relaxation times for in-plane and out-of-plane spin orientations as for the case of 2D materials like graphene, but it is unexpected in a polycrystalline metallic channel. Systematic measurements as a function of temperature and channel length, combined with both analytical and numerical thermoelectric transport models, demonstrate that the anisotropy in the Hanle lineshape is magneto-thermal in origin, caused by the anisotropic modulation of the Peltier and Seebeck coefficients of the ferromagnetic electrodes. Our results call for the consideration of such magnetothermoelectric effects in the study of anisotropic spin relaxation.

cond-mat.mes-hall↗

arXiv2016

Direct electronic measurement of Peltier cooling and heating in graphene

Thermoelectric effects allow the generation of electrical power from waste heat and the electrical control of cooling and heating. Remarkably, these effects are also highly sensitive to the asymmetry in the density of states around the Fermi energy and can therefore be exploited as probes of distortions in the electronic structure at the nanoscale. Here we consider two-dimensional graphene as an excellent nanoscale carbon material for exploring the interaction between electronic and thermal transport phenomena, by presenting a direct and quantitative measurement of the Peltier component to electronic cooling and heating in graphene. Thanks to an architecture including nanoscale thermometers, we detected Peltier component modulation of up to 15 mK for currents of 20 $μ$A at room temperature and observed a full reversal between Peltier cooling and heating for electron and hole regimes. This fundamental thermodynamic property is a complementary tool for the study of nanoscale thermoelectric transport in two-dimensional materials.

cond-mat.mes-hall↗

arXiv2015

Comparison of the magneto-Peltier and magneto-Seebeck effects in magnetic tunnel junctions

Understanding heat generation and transport processes in a magnetic tunnel junction (MTJ) is a significant step towards improving its application in current memory devices. Recent work has experimentally demonstrated the magneto-Seebeck effect in MTJs, where the Seebeck coefficient of the junction varies as the magnetic configuration changes from a parallel (P) to an anti-parallel (AP) configuration. Here we report the study on its as-yet-unexplored reciprocal effect, the magneto-Peltier effect, where the heat flow carried by the tunneling electrons is altered by changing the magnetic configuration of the MTJ. The magneto-Peltier signal that reflects the change in the temperature difference across the junction between the P and AP configurations scales linearly with the applied current in the small bias but is greatly enhanced in the large bias regime, due to higher-order Joule heating mechanisms. By carefully extracting the linear response which reflects the magneto-Peltier effect, and comparing it with the magneto-Seebeck measurements performed on the same device, we observe results consistent with Onsager reciprocity. We estimate a magneto-Peltier coefficient of 13.4 mV in the linear regime using a three-dimensional thermoelectric model. Our result opens up the possibility of programmable thermoelectric devices based on the Peltier effect in MTJs.

cond-mat.mes-hall↗

arXiv2015

Control of spin current by a magnetic YIG substrate in NiFe/Al nonlocal spin valves

We study the effect of a magnetic insulator (Yttrium Iron Garnet - YIG) substrate on the spin transport properties of Ni$_{80}$Fe$_{20}$/Al nonlocal spin valve (NLSV) devices. The NLSV signal on the YIG substrate is about 2 to 3 times lower than that on a non magnetic SiO$_2$ substrate, indicating that a significant fraction of the spin-current is absorbed at the Al/YIG interface. By measuring the NLSV signal for varying injector-to-detector distance and using a three dimensional spin-transport model that takes spin current absorption at the Al/YIG interface into account we obtain an effective spin-mixing conductance $G_{\uparrow\downarrow}\simeq 5 - 8\times 10^{13}~Ω^{-1}$m$^{-2}$. We also observe a small but clear modulation of the NLSV signal when rotating the YIG magnetization direction with respect to the fixed spin polarization of the spin accumulation in the Al. Spin relaxation due to thermal magnons or roughness of the YIG surface may be responsible for the observed small modulation of the NLSV signal.

cond-mat.mes-hall↗

arXiv2014

Verification of the Thomson-Onsager reciprocity relation for spin caloritronics

We investigate the Thomson-Onsager relation between the spin-dependent Seebeck and spin-dependent Peltier effect. To maintain identical device and measurement conditions we measure both effects in a single Ni$_{80}$Fe$_{20}$/Cu/Ni$_{80}$Fe$_{20}$ nanopillar spin valve device subjected to either an electrical or a thermal bias. In the low bias regime, we observe similar spin signals as well as background responses, as required by the Onsager reciprocity relation. However, at large biases, deviation from reciprocity occurs due to dominant nonlinear contribution of the temperature dependent transport coefficients. By systematic modeling of these nonlinear thermoelectric effects and measuring higher order thermoelectric responses for different applied biases, we identify the transition between the two regimes as the point at which Joule heating start to dominate over Peltier heating. Our results signify the importance of local equilibrium for the validity of this phenomenological reciprocity relation.

cond-mat.mes-hall↗

arXiv2014

Comparison between thermal and current driven spin-transfer torque in nanopillar metallic spin valves

We investigate the relation between thermal spin-transfer torque (TSTT) and the spin-dependent Seebeck effect (SDSE), which produces a spin current when a temperature gradient is applied across a metallic ferromagnet, in nanopillar metallic spin valves. Comparing its angular dependence (aSDSE) with the angle dependent magnetoresistance (aMR) measurements on the same device, we are able to verify that a small spin heat accumulation builds up in our devices. From the SDSE measurement and the observed current driven STT switching current of 0.8 mA in our spin valve devices, it was estimated that a temperature difference of 230 K is needed to produce an equal amount of TSTT. Experiments specifically focused on investigating TSTT show a response that is dominated by overall heating of the magnetic layer. Comparing it to the current driven STT experiments we estimate that only ~10% of the response is due to TSTT. This leads us to conclude that switching dominated by TSTT requires a direct coupling to a perfect heat sink to minimize the effect of overall heating. Nevertheless the combined effect of heating, STT and TSTT could prove useful for inducing magnetization switching when further investigated and optimized.

cond-mat.mes-hall↗

arXiv2013

Observation of the spin Peltier effect

We report the observation of the spin Peltier effect (SPE) in the ferrimagnetic insulator Yttrium Iron Garnet (YIG), i.e. a heat current generated by a spin current flowing through a Platinum (Pt)|YIG interface. The effect can be explained by the spin torque that transforms the spin current in the Pt into a magnon current in the YIG. Via magnon-phonon interactions the magnetic fluctuations modulate the phonon temperature that is detected by a thermopile close to the interface. By finite-element modelling we verify the reciprocity between the spin Peltier and spin Seebeck effect. The observed strong coupling between thermal magnons and phonons in YIG is attractive for nanoscale cooling techniques.

cond-mat.mes-hall↗

arXiv2013

Spin heat accumulation and spin-dependent temperatures in nanopillar spin valves

Since the discovery of the giant magnetoresistance (GMR) effect the use of the intrinsic angular momentum of the electrons has opened up new spin based device concepts. The two channel model of spin-up and spin-down electrons with spin-dependent conductivities very well describes spin and charge transport in such devices. In studies of the interaction between heat and spin transport, or spin caloritronics, until recently it was assumed that both spin species are always at the same temperature. Here we report the observation of different temperatures for the spin up (T_\uparrow) and spin down (T_\downarrow) electrons in a nanopillar spin valve subject to a heat current. The weak relaxation, especially at room temperature, of the spin heat accumulation (T_s = T_\uparrow-T_\downarrow) is essential for its detection in our devices. Using 3D finite element modeling spin heat accumulation (SHA) values of 120 mK and 350 mK are extracted at room temperature and 77 K, respectively, which is of the order of 10% of the total temperature bias over the pillar. This technique uniquely allows the study of inelastic spin scattering at low energies and elevated temperatures, which is not possible by spectroscopic methods.

cond-mat.mes-hall↗

arXiv2012

Spin-dependent Seebeck coefficients of Ni_{80}Fe_{20} and Co in nanopillar spin valves

We have experimentally determined the spin-dependent Seebeck coefficient of permalloy (Ni_{80}Fe_{20}) and cobalt (Co) using nanopillar spin valve devices. The devices were specifically designed to completely separate heat related effects from charge related effects. A pure heat current through the nanopillar spin valve, a stack of two ferromagnetic layers (F) separated by a non-magnetic layer (N), leads to a thermovoltage proportional to the spin-dependent Seebeck coefficient S_{S}=S_{\uparrow}-S_{\downarrow} of the ferromagnet, where S_{\uparrow} and S_{\downarrow} are the Seebeck coefficient for spin-up and spin-down electrons. By using a three-dimensional finite-element model (3D-FEM) based on spin-dependent thermoelectric theory, whose input material parameters were measured in separate devices, we were able to accurately determine a spin-dependent Seebeck coefficient of -1.8 microvolt/Kelvin and -4.5 microvolt/Kelvin for cobalt and permalloy, respectively corresponding to a Seebeck coefficient polarization P_{S}=S_{S}/S_{F} of 0.08 and 0.25, where S_{F} is the Seebeck coefficient of the ferromagnet. The results are in agreement with earlier theoretical work in Co/Cu multilayers and spin-dependent Seebeck and spin-dependent Peltier measurements in Ni_{80}Fe_{20}/Cu spin valve structures.

cond-mat.mes-hall↗

arXiv2011

Cooling and heating with electron spins: Observation of the spin Peltier effect

The Peltier coefficient describes the amount of heat that is carried by an electrical current when it passes through a material. Connecting two materials with different Peltier coefficients causes a net heat flow towards or away from the interface, resulting in cooling or heating at the interface - the Peltier effect. Spintronics describes the transport of charge and angular momentum by making use of separate spin-up and spin-down channels. Recently, the merger of thermoelectricity with spintronics has given rise to a novel and rich research field named spin caloritronics. Here, we report the first direct experimental observation of refrigeration/heating driven by a spin current, a new spin thermoelectric effect which we call the spin Peltier effect. The heat flow is generated by the spin dependency of the Peltier coefficient inside the ferromagnetic material. We explored the effect in a specifically designed spin valve pillar structure by measuring the temperature using an electrically isolated thermocouple. The difference in heat flow between the two magnetic configurations leads to a change in temperature. With the help of 3-D finite element modeling, we extracted permalloy spin Peltier coefficients in the range of -0.9 to -1.3 mV. These results enable magnetic control of heat flow and provide new functionality for future spintronic devices.

cond-mat.mes-hall↗

arXiv2011

Comparison between charge and spin transport in few layer graphene

Transport measurements on few layer graphene (FLG) are important as they interpolate between the properties of single layer graphene (SLG) as a true 2-dimensional material and the 3-dimensional bulk properties of graphite. In this article we present 4-probe local charge transport and non-local spin valve and spin precession measurements on lateral spin field-effect transistors (FET) on FLG. We study systematically the charge and spin transport properties depending on the number of layers and the electrical back gating of the device. We explain the charge transport measurements by taking the screening of scattering potentials into account and use the results to understand the spin data. The measured samples are between 3 and 20 layers thick and we include in our analysis our earlier results of the measurements on SLG for comparison. In our room temperature spin transport measurements we manage to observe spin signals over distances up to 10 u m and measure spin-relaxation times up to tau_s ~500 ps, about 4 times higher than in SLG. We calculate the density of states (DOS) of FLG using a zone-folding scheme to determine the charge diffusion coefficient D_C from the square resistance R_S. The resulting D_C and the spin diffusion coefficient D_S show similar values and depend only weakly on the number of layers and gate induced charge carriers. We discuss the implications of this on the identification of the spin-relaxation mechanism.

cond-mat.mes-hall↗