SearcharxivSearch

arXiv subjects

F. Kametani

Publications and source records attributed to F. Kametani.

At least 19 recordsLinked to original sources

A Strategic Approach to Advance Magnet Technology for Next Generation Colliders

Colliders are built on a foundation of superconducting magnet technology that provides strong dipole magnets to maintain the beam orbit and strong focusing magnets to enable the extraordinary luminosity required to probe physics at the energy frontier. The dipole magnet strength plays a critical role in dictating the energy reach of a collider, and the superconducting magnets are arguably the dominant cost driver for future collider facilities. As the community considers opportunities to explore new energy frontiers, the importance of advanced magnet technology - both in terms of magnet performance and in the magnet technology's potential for cost reduction - is evident, as the technology status is essential for informed decisions on targets for physics reach and facility feasibility.

physics.acc-ph

Fe-based high field superconductors for cost-effective future accelerator magnets

We propose a targeted attack on making the Fe-based superconductor (FBS) AEFe2As2 (122) (AE = alkaline earth, here Ba or Sr) into a much cheaper, higher stability margin, round, twisted and effectively isotropic multifilament conductor suitable for 16-20 T dipole magnet construction. This white paper urges to greatly accelerate progress by providing a fundamental understanding of what controls the transport critical current density, Jc, of 122 polycrystals and then in the wire forms. High grain-to-grain Jc is the one key property not yet fully demonstrated in this new superconductor and this is the key breakthrough that would make 122 practical. Whereas the intragrain (i.e. vortex pinning) Jc is already high enough to replace Nb3Sn, our recent work strongly suggests that unpredictable superconducting connectivity at grain boundaries (GBs) is the critical problem that limits the long-range Jc. We strongly emphasize the need to evaluate the true intrinsic nature of GBs in the polycrystalline forms before focusing on the wire fabrication.

cond-mat.supr-con

Electronic Landscape of Ce-based Intermetallics: CeCu$_2$Si$_2$ at an Extreme

CeCu$_2$Si$_2$ is an exemplary correlated electron metal that features two domes of unconventional superconductivity in its temperature-pressure phase diagram. The first dome surrounds an antiferromagnetic quantum critical point, whereas the more exotic second dome may span the termination point of a line of $f$-electron valence transitions. This behavior has received intense interest, but what has been missing are ways to access the high pressure behavior under milder conditions. Here we study Si $\rightarrow$ P chemical substitution, which compresses the unit cell volume but simultaneously weakens the hybridization between the $f$- and conduction electron states and encourages complex magnetism. At concentrations that show magnetism, applied pressure suppresses the magnetic ordering temperature and superconductivity is recovered for samples with low disorder. These results reveal that the electronic behavior in this system is controlled by a nontrivial combination of effects from unit cell volume and electronic shell filling. Guided by this topography we discuss prospects for uncovering a valence fluctuation quantum phase transition in the broader family of Ce-based ThCr$_2$Si$_2$-type materials through chemical substitution.

cond-mat.str-el

Unfolding the physics of URu2Si2 through Si -> P substitution

The heavy fermion intermetallic compound URu2Si2 exhibits a "hidden-order" phase below the temperature of 17.5 K, which supports both anomalous metallic behavior and unconventional superconductivity. While these individual phenomena have been investigated in detail, it remains unclear how they are related to each other and to what extent uranium f-electron valence fluctuations influence each one. Here we use ligand site substituted URu2Si2-xPx to establish their evolution under electronic tuning. We find that while hidden order is monotonically suppressed and destroyed for x $\leq$ 0.035, the superconducting strength evolves through a dome that is centered near $x$ $\approx$ 0.01 and terminates near $x$ $\approx$ 0.028. This behavior reveals that hidden order depends strongly on tuning outside of the U f-electron shells. It also suggests that while hidden order provides an environment for superconductivity and anomalous metallic behavior, it's fluctuations are not solely responsible for their progression.

cond-mat.str-el

Roles of intrinsic anisotropy and pi-band pairbreaking effects on critical currents in tilted c-axis MgB2 films probed by magneto-optical and transport measurements

Investigations of MgB2 and Fe-based superconductors in recent years have revealed many unusual effects of multiband superconductivity but manifestations of anisotropic multiband effects in the critical current density Jc have not been addressed experimentally, mostly because of the difficulties to measure Jc along the c-axis. To investigate the effect of very different intrinsic anisotropies of sigma and pi electron bands in MgB2 on current transport, we grew epitaxial films with tilted c-axis (THETA ~ 19.5°), which enabled us to measure the components of Jc both along the ab-plane and the c-axis using magneto-optical and transport techniques. These measurements were combined with scanning and transmission electron microscopy, which revealed terraced steps on the surface of the c-axis tilted films. The measured field and temperature dependencies of the anisotropic Jc(H) show that Jc,L parallel to the terraced steps is higher than Jc,T perpendicular to the terraced steps, and Jc of thinner films (50 nm) obtained from transport experiments at 0.1 T reaches ~10% of the depairing current density Jd in the ab plane, while magneto-optical imaging revealed much higher Jc at lower fields. To analyze the experimental data we developed a model of anisotropic vortex pinning which accounts for the observed behavior of Jc in the c-axis tilted films and suggests that the apparent anisotropy of Jc is affected by current pairbreaking effects in the weaker π band. Our results indicate that the out-of-plane current transport mediated by the π band could set the ultimate limit of Jc in MgB2 polycrystals.

cond-mat.supr-con

Development of very high Jc in Ba(Fe1-xCox)2As2 thin films grown on CaF2

Ba(Fe1-xCox)2As2 is the most tunable of the Fe-based superconductors (FBS) in terms of acceptance of high densities of self-assembled and artificially introduced pinning centres which are effective in significantly increasing the critical current density, Jc. Moreover, FBS are very sensitive to strain, which induces an important enhancement in critical temperature, Tc, of the material. In this paper we demonstrate that strain induced by the substrate can further improve Jc of both single and multilayer films by more than that expected simply due to the increase in Tc. The multilayer deposition of Ba(Fe1-xCox)2As2 on CaF2 increases the pinning force density Fp by more than 60% compared to a single layer film, reaching a maximum of 84 GN/m^3 at 22.5T and 4.2 K, the highest value ever reported in any 122 phase.

cond-mat.supr-con

Comparison of grain texture in round Bi2212 and flat Bi2223 superconducting wires and its relation to high critical current densities

Why Bi2Sr2CaCu2Ox (Bi2212) allows high critical current density Jc in round wires rather than only in the anisotropic tape form demanded by all other high temperature superconductors is important for future magnet applications. Here we compare the local texture of state-of-the-art Bi2212 and Bi2223 ((Bi,Pb)2Sr2Ca2Cu3O10), finding that round wire Bi2212 generates a dominant a-axis growth texture that also enforces a local biaxial texture (FWHM <15°) while simultaneously allowing the c-axes of its polycrystals to rotate azimuthally along and about the filament axis so as to generate macroscopically isotropic behavior. By contrast Bi2223 shows only a uniaxial (FWHM <15°) c-axis texture perpendicular to the tape plane without any in-plane texture. Consistent with these observations, a marked, field-increasing, field-decreasing Jc(H) hysteresis characteristic of weak-linked systems appears in Bi2223 but is absent in Bi2212 round wire. Growth-induced texture on cooling from the melt step of the Bi2212 Jc optimization process appears to be the key step in generating this highly desirable microstructure.

cond-mat.supr-con

Artificially engineered superlattices of pnictide superconductor

Significant progress has been achieved in fabricating high quality bulk and thinfilm iron-based superconductors. In particular, artificial layered pnictide superlattices offer the possibility of tailoring the superconducting properties and understanding the mechanism of the superconductivity itself. For high field applications, large critical current densities (Jc) and irreversibility fields (Hirr) are indispensable along all crystal directions. On the other hand, the development of superconducting devices such as tunnel junctions requires multilayered heterostructures. Here we show that artificially engineered undoped Ba-122 / Co doped Ba-122 compositionally modulated superlattices produce ab-aligned nanoparticle arrays. These layer and self-assemble along c-axis aligned defects, and combine to produce very large Jc and Hirr enhancements over a wide angular range. We also demonstrate a structurally modulated SrTiO3 (STO) / Co doped Ba-122 superlattice with sharp interfaces. Success in superlattice fabrication involving pnictides will aid the progress of heterostructured systems exhibiting novel interfacial phenomena and device applications.

cond-mat.supr-con

A transformative superconducting magnet technology for fields well above 30 T using isotropic round wire multifilament Bi2Sr2CaCu2O8-x conductor

We report here that magnetic fields of almost 34 T, far above the upper 24 T limit of Nb3Sn, can be generated using a multifilament round wire conductor made of the high temperature cuprate superconductor Bi2Sr2CaCu2O8-x (Bi-2212). A remarkable attribute of this Bi-2212 conductor is that it does not exhibit macroscopic texture and contains many high angle grain boundaries but nevertheless attains very high superconducting critical current densities Jc of 2500 A/mm2 at 20 T and 4.2 K. This Bi-2212 conductor does not possess the extreme texture that high Jc coated conductors of REBa2Cu3O7-x (REBCO) require, avoiding also its high aspect ratio, large superconducting anisotropy and the inherent sensitivity to defects of a single filament conductor. Bi-2212 wires can be wound or cabled into almost any type of superconducting magnet and will be especially valuable for very high field NMR magnets beyond the present 1 GHz proton resonance limit of Nb3Sn technology. This demonstration that grain boundary limits to high Jc can be practically overcome suggests the huge value of a renewed focus on grain boundary properties in non-ideal geometries, especially with the goal of translating the lessons of this Bi-2212 conductor into fabrication of multifilament round wire REBCO or Fe-based superconductors.

cond-mat.supr-con

Artificial and self-assembled pinning centers in Ba(Fe1-xCox)2As2 thin films as a route to very high current density

We report on the superior vortex pinning of single and multilayer Ba(Fe1-xCox)2As2 thin films with self-assembled c-axis and artificially introduced ab-plane pins. Ba(Fe1-xCox)2As2 can accept a very high density of pins (15-20 vol%) without Tc suppression. The matching field is greater than 12 T, producing a significant enhancement of the critical current density Jc, an almost isotropic Jc (Theta,20T) > 10^5 A/cm2, and global pinning force density Fp of about 50 GN/m^3. This scenario strongly differs from the high temperature cuprates where the addition of pins without Tc suppression is limited to 2-4 vol%, leading to small HIrr enhancements and improved Jc only below 3-5 Tesla.

cond-mat.supr-con

High intergrain critical current density in fine-grain (Ba0.6K0.4)Fe2As2 wires and bulks

The K- and Co-doped BaFe2As2 (Ba-122) superconducting compounds are potentially useful for applications because they have upper critical fields (Hc2) of well over 50 T, Hc2 anisotropy Gamma < 2, and thin film critical current densities exceeding 1 MAcm-2 at 4.2 K. However, thin-film bicrystals of Co-doped Ba-122 clearly exhibit weak link behavior for [001] tilt misorientations of more than about 5 degrees, suggesting that textured substrates would be needed for applications, as in the cuprates. Here we present a contrary and very much more positive result in which untextured polycrystalline (Ba0.6K0.4)Fe2As2 bulks and round wires with high grain boundary density have transport critical current densities well over 0.1 MAcm-2 (SF, 4.2 K), more than 10 times higher than that of any other ferropnictide wire. The enhanced grain connectivity is ascribed to their much improved phase purity and to the enhanced vortex stiffness of this low-anisotropy compound (Gamma ~ 1-2) compared to YBa2Cu3O7-x (Gamma ~ 5).

cond-mat.supr-con

A new approach for improving global critical current density in Fe(Se0.5Te0.5) polycrystalline materials

A novel method to prepare bulk Fe(Se0.5Te0.5) samples is presented, based on a melting process and a subsequent annealing treatment. With respect to the standard sintering technique, it produces much more homogeneous and denser samples, characterized by large and well interconnected grains. The resulting samples exhibit optimal critical temperature values, sharp resistive and magnetic transitions, large magnetic hysteresis loops and high upper critical fields are observed. Interestingly, the global critical current density is much enhanced as compared to the values reported in literature for bulk samples of the same 11 family, reaching about 103 A/cm2 at zero field at 4.2 K as assessed by magnetic, transport and magneto-optical techniques. Even more importantly, its field dependence turns out to be very weak, such that at μ_{0}H = 7 T it is suppressed only by a factor \sim2.

cond-mat.supr-con

Anisotropy of the irreversibility field for Zr-doped $(Y,Gd)Ba_2Cu_3O_{7-x}$ thin films up to 45T

The anisotropic irreversibility field B$_{Irr}$ of two $YBa_2Cu_3O_{7-x}$ thin films doped with additional rare earth (RE)=(Gd,Y) and Zr and containing strong correlated pins (splayed BaZrO$_{3}$ nanorods, and $RE_2O_3$ nanoprecipitates), has been measured over a very broad range up to 45T at temperatures 56 K<T<$T_c$. We found that the experimental angular dependence of $B_{Irr}(θ)$ does not follow the mass anisotropy scaling $B_{Irr}(θ)=B_{Irr}(0)(cos^2θ+γ^{-2}sin^2θ)^{-1/2}$, where $γ=(m_c/m_{ab})^{1/2}=5-6$ for the RE-doped $YBa_2Cu_3O_{7-x}$ (REBCO) crystals, m$_{ab}$ and m$_{c}$ are the effective masses along the ab plane and the c-axis, respectively, and $θ$ is the angle between B and the c-axis. For B parallel to the ab-planes and to the c-axis correlated pinning strongly enhances B$_{Irr}$, while at intermediate angles, $B_{Irr}(θ)$ follows the scaling behavior $B_{Irr}(θ)\propto(cos^2θ+γ_{RP}^2sin^2θ)^{1/2}$ with the effective anisotropy factor $γ_{RP}\approx3$ significantly smaller than the mass anisotropy would suggest. In spite of the strong effects of c-axis BaZrO$_{3}$ nanorods, we found even greater enhancements of B$_{Irr}$ for fields along the ab-planes than for fields parallel to the c-axis, as well as different temperature dependences of the correlated pinning contributions to B$_{Irr}$ for B//ab and B//c. Our results show that the dense and strong pins, which can now be incorporated into REBCO thin films in a controlled way, exert major and diverse effects on the measured vortex pinning anisotropy and the irreversibility field over wide ranges of B and T. In particular, we show that the relative contribution of correlated pinning to B$_{Irr}$ for B//c increases as the temperature increases due to the suppression of thermal fluctuations of vortices by splayed distribution of BaZrO$_{3}$ nanorods.

cond-mat.supr-con

Evidence for electromagnetic granularity in polycrystalline Sm1111 iron-pnictides with enhanced phase purity

We prepared polycrystalline SmFeAsO1-xFx (Sm1111) bulk samples by sintering and hot isostatic pressing (HIP) in order to study the effects of phase purity and relative density on the intergranular current density. Sintered and HIPped Sm1111 samples are denser with fewer impurity phases, such as SmOF and the grain boundary wetting phase, FeAs. We found quite complex magnetization behavior due to variations of both the inter and intragranular current densities. Removing porosity and reducing second phase content enhanced the intergranular current density, but HIPping reduced Tc and the intragranular current density, due to loss of fluorine and reduction of Tc. We believe that the HIPped samples are amongst the purest polycrystalline 1111 samples yet made. However, their intergranular current densities are still small, providing further evidence that polycrystalline pnictides, like polycrystalline cuprates, are intrinsically granular.

cond-mat.supr-con

Weak-link behavior of grain boundaries in superconducting Ba(Fe1-xCox)2As2 bicrystals

We show that despite the low anisotropy, strong vortex pinning and high irreversibility field Hirr close to the upper critical field Hc2 of Ba(Fe1-xCox)2As2, the critical current density Jgb across [001] tilt grain boundaries (GBs) of thin film Ba(Fe1-xCox)2As2 bicrystals is strongly depressed, similar to high-Tc cuprates. Our results suggest that weak-linked GBs are characteristic of both cuprates and pnictides because of competing orders, low carrier density, and unconventional pairing symmetry.

cond-mat.supr-con

Intergrain current flow in a randomly oriented polycrystalline SmFeAsO0.85 oxypnictide

We report a direct current transport study of the local intergrain connections in a polycrystalline SmFeAsO0.85 (Sm1111) bulk, for which we earlier estimated significant intergranular critical current density Jc. Our combined low temperature laser scanning microscopy (LTLSM) and scanning electron microscopy observations revealed only few grain-to-grain transport current paths, most of which switched off when a magnetic field was applied. These regions typically occur where current crosses Fe-As, which is a normal-metal wetting-phase that surrounds Sm1111 grains, producing a dense array of superconducting-normal-superconducting contacts. Our study points out the need to reduce the amount of grain boundary-wetting Fe-As phase, as well as the crack density within pnictide grains, as these defects produce a multiply connected current-blocking network.

cond-mat.supr-con

Combined microstructural and magneto optical study of current flow in polycrystalline forms of Nd and Sm Fe-oxypnictides

In order to understand why the inter- and intra-granular current densities of polycrystalline superconducting oxypnictides differ by three orders of magnitude, we have conducted combined magneto-optical and microstructural examinations of representative randomly oriented polycrystalline Nd and Sm single-layer oxypnictides. Magneto optical images show that the highest Jc values are observed within single grains oriented with their c axes perpendicular to the observation plane, implying that the intragranular current is anisotropic. The much lower intergranular Jc is at least partially due to many extrinsic factors, because cracks and a ubiquitous wetting As-Fe phase are found at many grain boundaries. However, some grain boundaries are structurally clean under high resolution transmission electron microscopy examination. Because the whole-sample global Jc(5K) values of the two samples examined are 1000-4000 A/cm2, some 10-40 times that found in random, polycrystalline YBa2Cu3O7-x, it appears that the dominant obstruction to intergranular current flow of many present samples is extrinsic, though some intrinsic limitation of current flow across grain boundaries cannot yet be ruled out.

cond-mat.supr-con

Evidence for two distinct scales of current flow in polycrystalline Sm and Nd iron oxypnictides

Early studies have found quasi-reversible magnetization curves in polycrystalline bulk rare-earth iron oxypnictides that suggest either wide-spread obstacles to intergranular current or very weak vortex pinning. In the present study of polycrystalline samarium and neodymium rare-earth iron oxypnictide samples made by high pressure synthesis, the hysteretic magnetization is significantly enhanced. Magneto optical imaging and study of the field dependence of the remanent magnetization as a function of particle size both show that global currents over the whole sample do exist but that the intergranular and intragranular current densities have distinctively different temperature dependences and differ in magnitude by about 1000. Assuming that the highest current density loops are restricted to circulation only within grains leads to values of ~5 MA/cm2 at 5 K and self field, while whole-sample current densities, though two orders of magnitude lower are 1000-10000 A/cm2, some two orders of magnitude higher than in random polycrystalline cuprates. We cannot yet be certain whether this large difference in global and intragrain current density is intrinsic to the oxypnictides or due to extrinsic barriers to current flow, because the samples contain significant second phase, some of which wets the grain boundaries and produces evidences of SNS proximity effect in the whole sample critical current.

cond-mat.supr-con