Searcharxiv⌕ Search

arXiv subjects

F. Maresca

Publications and source records attributed to F. Maresca.

12 recordsLinked to original sources
arXiv2022

An effective anisotropic visco-plastic model dedicated to high contrast ductile laminated microstructures: Application to lath martensite substructure

In particular types of layer- or lamellar-like microstructures such as pearlite and lath martensite, plastic slip occurs favorably in directions parallel to inter-lamellar boundaries. This may be due to the interplay between morphology and crystallographic orientation or, more generally, due to constraints imposed on the plastic slip due to the lamellar microstructural geometry. This paper proposes a micromechanics based, computationally efficient, scale independent model for particular type of lamellar microstructures containing softer lamellae, which are sufficiently thin to be considered as discrete slip planes embedded in a matrix representing the harder lamellae. Accordingly, the model is constructed as an isotropic visco-plastic model which is enriched with an additional orientation-dependent planar plastic deformation mechanism. This additional mode is activated when the applied load, projected on the direction of the soft films, induces a significant amount of shear stress. Otherwise, the plastic deformation is governed solely by the isotropic part of the model. The response of the proposed model is assessed via a comparison to direct numerical simulations (DNS) of an infinite periodic two-phase laminate. It is shown that the yielding behavior of the model follows the same behavior as the reference model. It is observed that the proposed model is highly anisotropic, and the degree of anisotropy depends on the contrast between the slip resistance (or yield stress) of the planar mode versus that of the isotropic part. The formulation is then applied to model the substructure of lath martensite with inter-layer thin austenite films. It is exploited in a mesoscale simulation of a dual-phase (DP) steel microstructure.The results are compared with those of a standard isotropic model and a full crystal plasticity model.

cond-mat.mtrl-sci↗
arXiv2022

Influence of orientation-dependent lath martensite yielding on the hardening behavior of quenched martensitic steels

The onset of plasticity in quenched martensitic microstructures is characterized by a low initial yield stress followed by an extremely strong initial hardening response, and then a sudden hardening saturation. Literature attributes this behavior to residual stresses and dislocations inherited from the martensitic transformation, or to microstructural heterogeneities causing strength differences among the grains. Here, we argue that orientation-dependent yielding of lath martensite due to inter-lath sliding, which induces a substructure boundary sliding mechanism, may also contribute significantly to the observed behavior. To demonstrate this, we systematically study its quantitative contribution to the elasto-plastic transition behavior in a numerical microstructural model. In the simulations, we employ an effective laminate model for the martensite packets which takes into account the yielding anisotropy due to sliding along the packet's habit plane orientation. To account for the effect of carbon content, martensitic microstructures with different levels of lath strength are considered. It is shown that the martensite packets with a favorable habit plane orientation start to yield earlier compared to those with an unfavorable orientation, which initially remain elastic. As a consequence, the macro-scale response of the microstructures exhibits a low yield stress, followed by a significant degree of initial hardening which continues until the saturation stress level is approached. The apparent work hardening rate depends on the contrast between the in-habit plane and out-of-habit plane yield strength used in the model.

cond-mat.mtrl-sci↗
arXiv2022

Extensive anisotropic lath martensite plasticity in dual-phase steels: A numerical-experimental investigation

This work presents a detailed experimental-numerical analysis of a low-carbon dual-phase steel microstructure, revealing evidence of significant anisotropic plastic deformation in lath martensite. A careful determination of the habit plane orientations in the present martensitic variants demonstrates that the observed traces of plastic slip coincide with the directions of the corresponding habit planes. To study the local lath martensite plastic activity, a dedicated substructure-enriched crystal plasticity based model is exploited. Compared with conventional bcc crystal plasticity, the model incorporates an extra crystallographic slip plane containing 3 softer slip systems parallel to the habit planes to capture the role of habit-plane plasticity. Simulations reveal consistent strain localization patterns as those observed in the experiments, with most plasticity localized in the martensite packets with their habit plane oriented favorably with respect to the applied load. Based on these insights, recommendations for future martensite modelling strategies and potential improvements of steels are discussed.

cond-mat.mtrl-sci↗
arXiv2022

The Hierarchical Potential Energy Landscape of Screw Dislocation Motion in Refractory High-entropy Alloys

High-entropy alloys (HEAs) with concentrated solid solutions are conceived to possess a rugged atomic and energy landscape in which dislocation motion necessarily proceeds to accommodate mechanical deformation. Fundamental questions remain as to how rough the energy landscape is and to what extent it can be influenced by the local ordering of their constituent elements. Here, we construct and report the potential energy landscape (PEL) governing screw dislocation motion in refractory HEAs that reveals a hierarchical and multilevel structure with a collection of small basins nested in large metabasin. This striking feature pertaining to HEAs exerts a trapping force and back stress on saddle point activations, retarding dislocation movement. By introducing chemical short-range order, the energy landscape is smoothed but skewed to different degrees that shifts the rate-liming process from kink-glide to kink-pair nucleation. The chemical disorder-roughened PEL in HEAs, analogous to structural disorder induced in metallic glasses, signifies the role of various barrier-hopping processes underlying the extraordinary mechanical behaviors of the two distinct groups of materials.

cond-mat.mtrl-sci↗
arXiv2016

Microscopic plasticity and damage in two-phase steels: on the competing role of crystallography and phase contrast

This paper unravels micromechanical aspects of metallic materials whose microstructure comprises grains of two or more phases. The local plastic response is determined by (i) the relative misorientation of the slip systems of individual grains, and (ii) the different mechanical properties of the phases. The relative importance of these two mechanisms at the meso-scale is unclear: is the plastic response dominated by the grain's anisotropy, or is this effect overwhelmed by the mechanical contrast between the two phases? The answer impacts the modeling of such a material at the meso-scale, but also gives insights in the resulting fracture mechanisms at that length-scale. Until now, this question has been addressed only for particular crystallographies and mechanical properties. In contrast, this paper studies the issue systematically using a large set of phase distributions, crystallographies, and material parameters. It is found that the macroscopic and the mesoscopic (grain-averaged) plastic response of the two extreme modeling choices (crystal plasticity or isotropic plasticity) converge with increasing phase contrast. The effect of the crystallography is completely overwhelmed by the phase contrast when the yield stress of the hard phase is a factor of four higher compared to the soft phase. When this ratio is lower than two, its influence may not be neglected. However, even in this regime, fracture initiation is controlled by the local arrangement of the phases. The latter is quantified in this paper through the average arrangement of the phases around fracture initiation sites.

cond-mat.mtrl-sci↗
arXiv2005

More evidence of localization in the low-lying Dirac spectrum

We have extended our computation of the inverse participation ratio of low-lying (asqtad) Dirac eigenvectors in quenched SU(3). The scaling dimension of the confining manifold is clearer and very near 3. We have also computed the 2-point correlator which further characterizes the localization.

hep-lat↗
arXiv2005

Predictions from Lattice QCD

In the past year, we calculated with lattice QCD three quantities that were unknown or poorly known. They are the $q^2$ dependence of the form factor in semileptonic $D\to Klν$ decay, the decay constant of the $D$ meson, and the mass of the $B_c$ meson. In this talk, we summarize these calculations, with emphasis on their (subsequent) confirmation by experiments.

hep-lat↗
arXiv2005

Update on pi and K Physics

We present an update of the MILC studies of the physics of light pseudoscalars using improved staggered fermions. New runs at lighter quark mass, as well as increased statistics for older sets, are enabling us to improve the results for decay constants in full QCD. In addition, we have analyzed quenched runs at two different lattice spacings. This makes possible a test of the applicability of staggered chiral perturbation theory in a different context.

hep-lat↗
arXiv2005

The Equation of State for QCD with 2+1 Flavors of Quarks

We report results for the interaction measure, pressure and energy density for nonzero temperature QCD with 2+1 flavors of improved staggered quarks. In our simulations we use a Symanzik improved gauge action and the Asqtad $O(a^2)$ improved staggered quark action for lattices with temporal extent $N_t=4$ and 6. The heavy quark mass $m_s$ is fixed at approximately the physical strange quark mass and the two degenerate light quarks have masses $m_{ud} =0.1m_s$ or $0.2m_s$. The calculation of the thermodynamic observables employs the integral method where energy density and pressure are obtained by integration over the interaction measure.

hep-lat↗
arXiv2005

Charmed meson decay constants in three-flavor lattice QCD

We present the first lattice QCD calculation with realistic sea quark content of the D^+ meson decay constant f_{D^+}. We use the MILC Collaboration's publicly available ensembles of lattice gauge fields, which have a quark sea with two flavors (up and down) much lighter than a third (strange). We obtain f_{D^+} = 201 +/- 3 +/- 17 MeV, where the errors are statistical and a combination of systematic errors. We also obtain f_{D_s} = 249 +/- 3 +/- 16 MeV for the D_s meson.

hep-lat↗
arXiv2003

Excitations of torelon

The excitations of gluonic flux tube in a periodic lattice are examined. Monte Carlo simulations from an anisotropic lattice are presented and the comparison with effective string models is discussed.

hep-lat↗