arXiv subjects

F. Marinho

Publications and source records attributed to F. Marinho.

16 recordsLinked to original sources

arXiv2025

Modeling Light Signals Using Data from the First Pulsed Neutron Source Program at the DUNE Vertical Drift ColdBox Test Facility at CERN Neutrino Platform

In this paper, we present a first quantitative test of detected light signals produced in a pulsed neutron source run in a small vertical drift LArTPC at the CERN neutrino platform ColdBox test facility. The ColdBox cryostat, detectors, neutron sources, and particle interactions are modeled and simulated using Fluka. A good agreement is found in the detected number of photoelectrons, with values below 650 photoelectrons in both data and simulation, for all four X-ARAPUCA photodetectors on the cathode in the LArTPC. A time constant is also fitted from the neutron-beam-off light signal spectrum and found consistent between data and MC. Several important systematic effects are discussed and serve as guides for future runs at larger LArTPCs.

hep-ex↗

arXiv2025

Updated parameters of the LArQL model

The need for a microscopic description of scintillation light generation in liquid argon becomes increasingly desirable with the upcoming operation of large scale LArTPCs in the next decade. While a detailed mathematical account of the process is still to be achieved, a phenomenological model for simultaneously treating ionization and scintillation, LArQL, has been successfully employed to describe the range of electric fields from 0 to 0.75 kV/cm and dE/dx from 2 to 40 MeV/cm providing the anti-correlation between the free ionization charge and scintillation light. A reanalysis of the original model parameter values has been performed within a global fit procedure and is presented.

hep-ex↗

arXiv2025

APEX: Optimized vertical drift PDS for DUNE FD3

The Deep Underground Neutrino Experiment currently under construction in the US will be a long-baseline neutrino oscillation experiment dedicated to determining the neutrino mass ordering and to measure the CP violation phase in the lepton sector. DUNE will also perform studies of non-beam physics such as atmospheric neutrinos, bursts from supernovae and nucleon decays in which photon detection systems will play a major role in triggering and also provide calorimetric measurements. For the second phase of DUNE, two additional detector modules will be added in the far detector complex in the Sanford Underground Research Facility. We present the Aluminum Profiles with Embedded X-ARAPUCA (APEX) concept as an advanced proposal for the photon detector system of the third DUNE far detector module. This system aims to have an optical coverage of approximately 60% made viable by the technology advancement achieved by the DUNE collaboration on the use of non-conductive optical fibers for power and signal readout of the photon detector units. Such large coverage will provide enhanced light collection capabilities at MeV-scale energy deposit level per interaction and optimal energy reconstruction resolution up to the GeV scale. The attained electrical isolation of the detector units with low noise levels allows for a complete instrumentation of the field cage walls with satisfactory segmentation as the readout scheme envisages a much larger than typical number of channels to be adopted. We discuss the main features of the system, first estimates on its expected performances, potential for physics measurements and prototyping plans for R\&D.

hep-ex↗

arXiv2024

Scintillation Light in SBND: Simulation, Reconstruction, and Expected Performance of the Photon Detection System

SBND is the near detector of the Short-Baseline Neutrino program at Fermilab. Its location near to the Booster Neutrino Beam source and relatively large mass will allow the study of neutrino interactions on argon with unprecedented statistics. This paper describes the expected performance of the SBND photon detection system, using a simulated sample of beam neutrinos and cosmogenic particles. Its design is a dual readout concept combining a system of 120 photomultiplier tubes, used for triggering, with a system of 192 X-ARAPUCA devices, located behind the anode wire planes. Furthermore, covering the cathode plane with highly-reflective panels coated with a wavelength-shifting compound recovers part of the light emitted towards the cathode, where no optical detectors exist. We show how this new design provides a high light yield and a more uniform detection efficiency, an excellent timing resolution and an independent 3D-position reconstruction using only the scintillation light. Finally, the whole reconstruction chain is applied to recover the temporal structure of the beam spill, which is resolved with a resolution on the order of nanoseconds.

physics.ins-det↗

arXiv2022

LArQL: A phenomenological model for treating light and charge generation in liquid argon

Experimental data shows that both ionization charge and scintillation light in LAr depend on the deposited energy density ($dE/dx$) and electric field ($\mathcal{E}$). Moreover, free ionization charge and scintillation light are anticorrelated, complementary at a given ($dE/dx$, $\mathcal{E}$) pair. We present LArQL, a phenomenological model that provides the anticorrelation between light and charge and its dependence on the deposited energy as well as on the electric field applied. It modifies the Birks' charge model considering the contribution from the escape electrons at null and low electric fields, and reconciles with Birks' model prediction at higher fields. Deviations from current Birks' model are observed for LArTPCs operating at low $\mathcal{E}$ and for heavily ionizing particles. The LArQL model presents a satisfactory description at $dE/dx$ and field ranges for interacting particles in LArTPCs and fits well the available data. Improvements via data sets compilation and global fits are also interesting features of the model.

physics.ins-det↗

arXiv2021

Liquid argon characterization of the X-ARAPUCA with alpha particles, gamma rays and cosmic muons

The X-ARAPUCA device is the baseline choice for the photon detection system of the first far detector module of the DUNE experiment. We present the results of the first complete characterization of a small scale X-ARAPUCA prototype, which is a slice of a full DUNE module. Its total detection efficiency in liquid argon was measured with three different ionizing radiations: $\alpha$ particles, $\gamma$'s and muons and resulted to be $\sim$2.2% when the active silicon photomultipliers were biased at +5.0 V of over voltage, corresponding to a Photon Detection Efficiency around 50% at room temperature. This value comfortably satisfies the requirements of the first DUNE far detector module (detection efficiency $>$2.0%) and allows to achieve an energy resolution comparable to the one achievable with the Time Projection Chambers for energies below 10 MeV, which is the region relevant for Supernova neutrino detection.

physics.ins-det↗

arXiv2020

Charge collection properties of prototype sensors for the LHCb VELO upgrade

An extensive sensor testing campaign is presented, dedicated to measuring the charge collection properties of prototype candidates for the Vertex Locator (VELO) detector for the upgraded LHCb experiment. The charge collection is measured with sensors exposed to fluences of up to $8 \times 10^{15}~1~\mathrm{\,Me\kern -0.1em V}~ \mathrm{ \,n_{eq}}~{\mathrm{ \,cm}}^{-2}$, as well as with nonirradiated prototypes. The results are discussed, including the influence of different levels of irradiation and bias voltage on the charge collection properties. Charge multiplication is observed on some sensors that were nonuniformly irradiated with 24 GeV protons, to the highest fluence levels. An analysis of the charge collection near the guard ring region is also presented, revealing significant differences between the sensor prototypes. All tested sensor variants succeed in collecting the minimum required charge of 6000 electrons after the exposure to the maximum fluence.

physics.ins-det↗

arXiv2020

Cosmic Background Removal with Deep Neural Networks in SBND

In liquid argon time projection chambers exposed to neutrino beams and running on or near surface levels, cosmic muons and other cosmic particles are incident on the detectors while a single neutrino-induced event is being recorded. In practice, this means that data from surface liquid argon time projection chambers will be dominated by cosmic particles, both as a source of event triggers and as the majority of the particle count in true neutrino-triggered events. In this work, we demonstrate a novel application of deep learning techniques to remove these background particles by applying semantic segmentation on full detector images from the SBND detector, the near detector in the Fermilab Short-Baseline Neutrino Program. We use this technique to identify, at single image-pixel level, whether recorded activity originated from cosmic particles or neutrino interactions.

physics.data-an↗

arXiv2020

The Upgrade I of LHCb VELO -- towards an intelligent monitoring platform

The Large Hadron Collider beauty (LHCb) detector is designed to detect decays of b- and c- hadrons for the study of CP violation and rare decays. At the end of the LHC Run 2, many of the LHCb measurements remained statistically dominated. In order to increase the trigger yield for purely hadronic channels, the hardware trigger will be removed, and the detector will be read out at 40 MHz. This, in combination with the five-fold increase in luminosity, requires radical changes to LHCb's electronics, and, in some cases, the replacement of entire sub-detectors with state-of-the-art detector technologies. The Vertex Locator (VELO) surrounding the interaction region is used to reconstruct the collision points (primary vertices) and decay vertices of long-lived particles (secondary vertices). The upgraded VELO will be composed of 52 modules placed along the beam axis divided into two retractable halves. The modules will each be equipped with 4 silicon hybrid pixel tiles, each read out by 3 VeloPix ASICs. The total output data rate anticipated for the whole detector will be around 1.6 Tbit/s. The highest occupancy ASICs will have pixel hit rates of approximately 900 Mhit/s, with the corresponding output data rate of 15 Gbit/s. The LHCb upgrade detector will be the first detector to read out at the full LHC rate of 40 MHz. The VELO upgrade will utilize the latest detector technologies to read out at this rate while maintaining the required radiation-hard profile and minimizing the detector material.

physics.ins-det↗

arXiv2019

Measuring light with light dependent resistors: an easy approach for optics experiments

We entertain the use of light dependent resistors as a viable option as measuring sensors in optics laboratory experiments or classroom demonstrations. The main advantages of theses devices are essentially very low cost, easy handling and commercial availability which can make them interesting for instructors with limited resources. Simple calibration procedures were developed indicating a precision of $\sim 5\% $ for illuminance measurements. Optical experiments were carried out as proof of feasibility for measurements of reflected and transmitted light and its quality results are presented. In particular, the sensor measurements allowed to verify the angular distribution of a Lambertian reflective material, to observe transmitted and reflected specular light on a glass slab as function of the incoming angle of a light beam, and to estimate glass refractive index with values averaging $1.51\pm0.06$ in satisfactory agreement with the expected 1.52 value.

physics.ed-ph↗

arXiv2018

Liquid Argon test of the ARAPUCA device

The ARAPUCA is a novel concept for liquid argon scintillation light detection which has been proposed for the photon detection system of the Deep Underground Neutrino Experiment. The test in liquid argon of one of the first ARAPUCA prototypes is presented in this work, where the working principle is experimentally demonstrated. The prototype has an acceptance window of 9 cm$^2$ and is read-out by a single SiPM with active area of 0.36 cm$^2$. Its global detection efficiency was estimated by exposing it to a $^{238}U$ $α$ source and to cosmic rays and was found to be 1.15\% $\pm$ 0.15\%, in good agreement with the prediction of a detailed Monte Carlo simulation of the device. Several other ARAPUCA prototypes of bigger dimensions and read-out by arrays of SiPMs have been built and are actually under test. In particular 32 ARAPUCA cells have been installed inside the protoDUNE detector, which is being assembled at CERN and will be operated in the second half of 2018.

physics.ins-det↗

arXiv2018

Numerical characterization of the ARAPUCA: a new approach for LAr scintillation light detection

The ARAPUCA concept has been proposed as a simple and neat solution for increasing the effective collection area of SiPMs through the shifting and trapping of scintillation light in noble liquids, thus with great potential for improving timing and calorimetry resolution in neutrino and dark matter search experiments using time projection chambers. It is expected to achieve a single photon detection efficiency larger than 1\%. The initial design consists of a box made of highly reflective internal surface material and with an acceptance window for photons composed of two shifters and a dichroic filter. The first shifter converts liquid argon scintillation VUV light to a photon of wavelength smaller than the dichroic cutoff, so the surface is highly transparent to it. When passing through the dichroic filter, it reaches the second shifter which allows the photon to be shifted to the visible region and be detected by the SiPM nested inside it. When it enters the box, the photon will likely reflect a few times, including on the dichroic filter surface, before being detected. We present a full numerical description of the device using a Monte Carlo framework, including characterization of the acceptance window, models of reflection of different materials, and sensor quantum efficiency, that can now be used to further improve the detection efficiency by comparing different geometries, positions of SiPM and materials. Estimates of simulated efficiencies, number of reflections and acquisition time are presented and compared to analytical calculations. Those are very promising results, giving a total efficiency for the detection of scintillation light in liquid argon of 1.7$\rm \pm$0.3\%. Comparison of the estimated total efficiency with a preliminary result from an experimental test with an ARAPUCA prototype made in Brazil is also presented.

physics.ins-det↗

arXiv2018

The X-ARAPUCA: An improvement of the ARAPUCA device

The ARAPUCA is a novel technology for the detection of liquid argon scintillation light, which has been proposed for the far detector of the Deep Underground Neutrino Experiment. The X-ARAPUCA is an improvement to the original ARAPUCA design, retaining the original ARAPUCA concept of photon trapping inside a highly reflective box while using a wavelength shifting slab inside the box to increase the probability of collecting trapped photons onto a silicon photomultiplier array. The X-ARAPUCA concept is presented and its performances are compared to those of a standard ARAPUCA by means of analytical calculations and Monte Carlo simulations.

physics.ins-det↗

arXiv2016

Kinematic measurements using an infrared sensor

The use of an infrared sensor as a new alternative to measure position as a function of time in kinematic experiments was investigated using a microcontroller as data acquisition and control device. These are versatile sensors that offer advantages over the typical ultrasound devices. The setup described in this paper enables students to develop their own experiments promoting opportunities for learning physical concepts such as the different types of forces that can act on a body (gravitational, elastic, drag, etc.) and the resulting types of movements with good sensitivity within the $\rm 4-30~cm$ range. As proof of concept we also present the application of a prototype designed to record the kinematics of mass-spring systems.

physics.ed-ph↗

arXiv2014

A GEANT4 based Simulation for Pixelated X-ray Hybrid Detectors: Extended Report

Monte Carlo simulations are powerful tools for understanding the effects of radiation interactions within detector devices allowing not only to evaluate typical estimates for experimental measurements and to serve as means for designing experiments but to provide additional information that are usually not easily accessible experimentally. A simple numerical approach to describe the functioning of pixelated detectors is presented in this paper. Estimates from a variety of simulated setups are obtained and the observed features compared with experimental results to verify to which extent they are correctly described by this method. Fundamental curves such as interaction probability and reconstructed energy deposited are calculated as function of beam energy. Pixel response, charge sharing effects and resolution estimates are also obtained.

physics.ins-det↗

arXiv2014

Performance of the LHCb Vertex Locator

The Vertex Locator (VELO) is a silicon microstrip detector that surrounds the proton-proton interaction region in the LHCb experiment. The performance of the detector during the first years of its physics operation is reviewed. The system is operated in vacuum, uses a bi-phase CO2 cooling system, and the sensors are moved to 7 mm from the LHC beam for physics data taking. The performance and stability of these characteristic features of the detector are described, and details of the material budget are given. The calibration of the timing and the data processing algorithms that are implemented in FPGAs are described. The system performance is fully characterised. The sensors have a signal to noise ratio of approximately 20 and a best hit resolution of 4 microns is achieved at the optimal track angle. The typical detector occupancy for minimum bias events in standard operating conditions in 2011 is around 0.5%, and the detector has less than 1% of faulty strips. The proximity of the detector to the beam means that the inner regions of the n+-on-n sensors have undergone space-charge sign inversion due to radiation damage. The VELO performance parameters that drive the experiment's physics sensitivity are also given. The track finding efficiency of the VELO is typically above 98% and the modules have been aligned to a precision of 1 micron for translations in the plane transverse to the beam. A primary vertex resolution of 13 microns in the transverse plane and 71 microns along the beam axis is achieved for vertices with 25 tracks. An impact parameter resolution of less than 35 microns is achieved for particles with transverse momentum greater than 1 GeV/c.

physics.ins-det↗