Searcharxiv⌕ Search

arXiv subjects

F. Meier

Publications and source records attributed to F. Meier.

At least 37 records · Page 2Linked to original sources

Beam background expectations for Belle II at SuperKEKB

The Belle II experiment at the SuperKEKB electron-positron collider aims to collect an unprecedented data set of $\rm 50~{\rm ab}^{-1}$ to study $CP$-violation in the $B$-meson system and to search for Physics beyond the Standard Model (BSM). SuperKEKB is already the world's highest-luminosity collider. In order to collect the planned data set within approximately one decade, the target is to reach a peak luminosity of $\rm 6.3 \times 10^{35}~cm^{-2}s^{-1}$ by further increasing the beam currents and reducing the beam-size at the interaction point by squeezing the betatron function down to $β^{*}_{\rm y}=\rm 0.3~mm$. Beam backgrounds are a key challenge in this context. We estimate the expected background evolution in the next ten years and discuss potential challenges and background mitigation strategies. We find that backgrounds will remain high but acceptable until a luminosity of at least $\rm 2.8\times 10^{35}~cm^{-2}s^{-1}$ is reached at $β^{*}_{\rm y}=\rm 0.6~mm$. Beyond this luminosity, predictions are highly uncertain, owing to a planned redesign of the interaction region. Improved background estimates with reduced uncertainties for the final, maximum-luminosity operation will require completion of this redesign.

hep-ex↗

Application of recoil-imaging time projection chambers to directional neutron background measurements in the SuperKEKB accelerator tunnel

Gaseous time projection chambers (TPCs) with high readout segmentation are capable of reconstructing detailed 3D ionization distributions of nuclear recoils resulting from elastic neutron scattering. Using a system of six compact TPCs with pixel ASIC readout, filled with a 70:30 mixture of He:CO$_2$ gas, we analyze the first directional measurements of beam-induced neutron backgrounds in the tunnel regions surrounding the Belle II detector at the SuperKEKB $e^+e^-$ collider. With the use of 3D recoil tracking, we show that these TPCs are capable of maintaining nearly $100\%$ nuclear recoil purity to reconstructed ionization energies ($E_\text{reco}$) as low as 5 $\mathrm{keV_\text{ee}}$. Using a large sample of simulated $^4$He, $^{12}$C, and $^{16}$O recoil tracks, we find consistency between predicted and measured recoil energy spectra in five of the six TPCs, providing useful validation of the neutron production mechanisms modeled in simulation. Restricting this sample to $^4$He recoil tracks with $E_\text{reco}>40$ $\mathrm{keV_\text{ee}}$, we demonstrate axial angular resolutions within $8^{\circ}$ and we introduce a procedure that under suitable conditions, correctly assigns the vector direction to $91\%$ of simulated $^4$He recoils. Applying this procedure to assign vector directions to measured $^4$He recoil tracks, we observe consistency between the angular distributions of observed and simulated recoils, providing first experimental evidence of localized neutron "hotspots" in the accelerator tunnel. Observed rates of nuclear recoils in these TPCs suggest that simulation overestimates the neutron flux from these hotspots.

physics.ins-det↗

Belle II Executive Summary

Belle II is a Super $B$ Factory experiment, expected to record 50 ab$^{-1}$ of $e^+e^-$ collisions at the SuperKEKB accelerator until 2035. The large samples of $B$ mesons, charm hadrons, and tau leptons produced in the clean experimental environment of $e^+e^-$ collisions will provide the basis of a broad and unique flavor-physics program. Belle II will pursue physics beyond the Standard Model in many ways, for example: improving the precision of weak interaction parameters, particularly Cabibbo-Kobayashi-Maskawa (CKM) matrix elements and phases, and thus more rigorously test the CKM paradigm, measuring lepton-flavor-violating parameters, and performing unique searches for missing-mass dark matter events. Many key measurements will be made with world-leading precision.

hep-ex↗

$B$-flavor tagging at Belle II

We report on new flavor tagging algorithms developed to determine the quark-flavor content of bottom ($B$) mesons at Belle II. The algorithms provide essential inputs for measurements of quark-flavor mixing and charge-parity violation. We validate and evaluate the performance of the algorithms using hadronic $B$ decays with flavor-specific final states reconstructed in a data set corresponding to an integrated luminosity of $62.8$ fb$^{-1}$, collected at the $Υ$(4$S$) resonance with the Belle II detector at the SuperKEKB collider. We measure the total effective tagging efficiency to be $\varepsilon_{\rm eff} = \big(30.0 \pm 1.2(\text{stat}) \pm 0.4(\text{syst})\big)\%$ for a category-based algorithm and $\varepsilon_{\rm eff} = \big(28.8 \pm 1.2(\text{stat}) \pm 0.4(\text{syst})\big)\%$ for a deep-learning-based algorithm.

hep-ex↗

Punzi-loss: A non-differentiable metric approximation for sensitivity optimisation in the search for new particles

We present the novel implementation of a non-differentiable metric approximation and a corresponding loss-scheduling aimed at the search for new particles of unknown mass in high energy physics experiments. We call the loss-scheduling, based on the minimisation of a figure-of-merit related function typical of particle physics, a Punzi-loss function, and the neural network that utilises this loss function a Punzi-net. We show that the Punzi-net outperforms standard multivariate analysis techniques and generalises well to mass hypotheses for which it was not trained. This is achieved by training a single classifier that provides a coherent and optimal classification of all signal hypotheses over the whole search space. Our result constitutes a complementary approach to fully differentiable analyses in particle physics. We implemented this work using PyTorch and provide users full access to a public repository containing all the codes and a training example.

hep-ex↗

CsI(Tl) Pulse Shape Discrimination with the Belle II Electromagnetic Calorimeter as a Novel Method to Improve Particle Identification at Electron-Positron Colliders

This paper describes the implementation and performance of CsI(Tl) pulse shape discrimination for the Belle II electromagnetic calorimeter, representing the first application of CsI(Tl) pulse shape discrimination for particle identification at an electron-positron collider. The pulse shape characterization algorithms applied by the Belle II calorimeter are described. Control samples of $γ$, $μ^+$, $π^\pm$, $K^\pm$ and $p/\bar{p}$ are used to demonstrate the significant insight into the secondary particle composition of calorimeter clusters that is provided by CsI(Tl) pulse shape discrimination. Comparisons with simulation are presented and provide further validation for newly developed CsI(Tl) scintillation response simulation techniques, which when incorporated with GEANT4 simulations allow the particle dependent scintillation response of CsI(Tl) to be modelled. Comparisons between data and simulation also demonstrate that pulse shape discrimination can be a new tool to identify sources of improvement in the simulation of hadronic interactions in materials. The $K_L^0$ efficiency and photon-as-hadron fake-rate of a multivariate classifier that is trained to use pulse shape discrimination is presented and comparisons are made to a shower-shape based approach. CsI(Tl) pulse shape discrimination is shown to reduce the photon-as-hadron fake-rate by over a factor of 3 at photon energies of 0.2 GeV and over a factor 10 at photon energies of 1 GeV.

physics.ins-det↗

MuPix and ATLASPix -- Architectures and Results

High Voltage Monolithic Active Pixel Sensors (HV-MAPS) are based on a commercial High Voltage CMOS process and collect charge by drift inside a reversely biased diode. HV-MAPS represent a promising technology for future pixel tracking detectors. Two recent developments are presented. The MuPix has a continuous readout and is being developed for the Mu3e experiment whereas the ATLASPix is being developed for LHC applications with a triggered readout. Both variants have a fully monolithic design including state machines, clock circuitries and serial drivers. Several prototypes and design variants were characterised in the lab and in testbeam campaigns to measure efficiencies, noise, time resolution and radiation tolerance. Results from recent MuPix and ATLASPix prototypes are presented and prospects for future improvements are discussed.

physics.ins-det↗

Performance of the large scale HV-CMOS pixel sensor MuPix8

The Mu3e experiment is searching for the charged lepton flavour violating decay $ μ^+\rightarrow e^+ e^- e^+ $, aiming for an ultimate sensitivity of one in $10^{16}$ decays. In an environment of up to $10^9$ muon decays per second the detector needs to provide precise vertex, time and momentum information to suppress accidental and physics background. The detector consists of cylindrical layers of $50\, μ\text{m}$ thin High Voltage Monolithic Active Pixel Sensors (HV-MAPS) placed in a $1\,\text{T}$ magnetic field. The measurement of the trajectories of the decay particles allows for a precise vertex and momentum reconstruction. Additional layers of fast scintillating fibre and tile detectors provide sub-nanosecond time resolution. The MuPix8 chip is the first large scale prototype, proving the scalability of the HV-MAPS technology. It is produced in the AMS aH18 $180\, \text{nm}$ HV-CMOS process. It consists of three sub-matrices, each providing an untriggered datastream of more than $10\,\text{MHits}/\text{s}$. The latest results from laboratory and testbeam characterisation are presented, showing an excellent performance with efficiencies $>99.6\,\text{\%}$ and a time resolution better than $10\, \text{ns}$ achieved with time walk correction.

physics.ins-det↗

Global Decay Chain Vertex Fitting at B-Factories

We present a particle vertex fitting method designed for B factories. The presented method uses a Kalman Filter to solve a least squares estimate to globally fit decay chains, as opposed to traditional methods that fit each vertex at a time. It allows for the extraction of particle momenta, energies, vertex positions and flight lengths, as well as the uncertainty estimates of these quantities. Furthermore, it allows for the precise extraction of vertex parameters in complex decay chains containing neutral final state particles, such as $γ$ or $K^0_L$ , which cannot properly be tracked due to limited spatial resolution of longitudinally segmented single-layer crystal calorimeters like the Belle II ECL. The presented technique can be used to suppress combinatorial background and improve resolutions on measured parameters. We present studies using Monte Carlo simulations of collisions in the Belle II experiment, where modes with neutrals are crucial to the physics analysis program.

hep-ex↗

Irradiation study of a fully monolithic HV-CMOS pixel sensor design in AMS 180 nm

High-Voltage Monolithic Active Pixel Sensors (HV-MAPS) based on the 180 nm HV-CMOS process have been proposed to realize thin, fast and highly integrated pixel sensors. The MuPix7 prototype, fabricated in the commercial AMS H18 process, features a fully integrated on-chip readout, i.e. hit-digitization, zero suppression and data serialization. It is the first fully monolithic HV-CMOS pixel sensor that has been tested for the use in high irradiation environments like HL-LHC. We present results from laboratory and test beam measurements of MuPix7 prototypes irradiated with neutrons (up to $5.0\cdot10^{15}{\,\rm{n}_{\rm{eq}}/cm^2}$) and protons (up to $7.8\cdot 10^{15} \,\rm{protons}/cm^2$) and compare the performance with non-irradiated sensors. Efficiencies well above 90 % at noise rates below 200 Hz per pixel are measured. A time resolution better than 22 ns is measured for all tested settings and sensors, even at the highest irradiation fluences. The data transmission at 1.25 Gbit/s and the on-chip PLL remain fully functional.

physics.ins-det↗

The MuPix Telescope: A Thin, high Rate Tracking Telescope

The MuPix Telescope is a particle tracking telescope, optimized for tracking low momentum particles and high rates. It is based on the novel High-Voltage Monolithic Active Pixel Sensors (HV-MAPS), designed for the Mu3e tracking detector. The telescope represents a first application of the HV-MAPS technology and also serves as test bed of the Mu3e readout chain. The telescope consists of up to eight layers of the newest prototypes, the MuPix7 sensors, which send data self-triggered via fast serial links to FPGAs, where the data is time-ordered and sent to the PC. A particle hit rate of 1 MHz per layer could be processed. Online tracking is performed with a subset of the incoming data. The general concept of the telescope, chip architecture, readout concept and online reconstruction are described. The performance of the sensor and of the telescope during test beam measurements are presented.

physics.ins-det↗

Observation of Topological Order in the TlBiSe2 class : Probing the "spin" and "phase" on topological insulator surfaces

A topological insulator is characterized by spin-momentum locking on its boundary. The spin momentum locking on the surface of a three dimensional topological insulator leads to the existence of a non-trivial Berry's phase which leads to exotic transport phenomena on topological surfaces. Using spin-sensitive probes (Mott polarimetry), we observe the spin-momentum coupling and uncover the chiral nature of surface electrons in TlBiSe2. We demonstrate that the surface electrons in TlBiSe2 collectively carry a quantum Berry's phase of $π$ and a definite chirality ($η$ = -1, left-handed) associated with its spin-texture or vortex-structure on the Fermi surface on both the top and the bottom surfaces. Our experimental results for the first time not only prove the existence of Z2 topological-order in the bulk but also reveal the existence of helical quasiparticle modes on the topological surface. Spin-texture calculations would be reported elsewhere.

cond-mat.mes-hall↗

Topological Phase Transition and Texture Inversion in a Tunable Topological Insulator

The recently discovered three dimensional or bulk topological insulators are expected to exhibit exotic quantum phenomena. It is believed that a trivial insulator can be twisted into a topological state by modulating the spin-orbit interaction or the crystal lattice via odd number of band inversions, driving the system through a topological quantum phase transition. By directly measuring the topological invariants (for the method to directly measure Fu-Kane {$ν_0$}, see Hsieh \textit{et.al.,} Science 323, 919 (2009) at http://www.sciencemag.org/content/323/5916/919.abstract) we report the observation of a phase transition in a tunable spin-orbit system BiTl(S{1-d}Se{d})2 (which is an analog of the most studied topological insulator Bi2Se3, see Xia \textit{et.al.,} Nature Phys. 5, 398 (2009) at http://www.nature.com/nphys/journal/v5/n6/full/nphys1294.html and Spin-Momentum locking at http://www.nature.com/nature/journal/v460/n7259/full/nature08234.html) where the topological insulator state formation is visualized for the first time. In the topological state, vortex-like polarization states are observed to exhibit 3D vectorial textures, which collectively feature a chirality transition of its topological spin-textures as the spin-momentum locked (Z2 topologically ordered) electrons on the surface go through the zero carrier density point. Such phase transition and texture chirality inversion can be the physical basis for observing \textit{fractional charge} (e/2) and other related fractional topological phenomena.

cond-mat.mes-hall↗

Direct observation of spin-polarized surface states in the parent compound of topological insulator Bi-Sb using spin-resolved-ARPES in a 3D Mott-polarimetry spin mode

We report high-resolution spin-resolved photoemission spectroscopy (Spin-ARPES) measurements on the parent compound Sb of the first discovered 3D topological insulator Bi{1-x}Sb{x} [D. Hsieh et al., Nature 452, 970 (2008) Submitted 2007]. By modulating the incident photon energy, we are able to map both the bulk and (111) surface band structure, from which we directly demonstrate that the surface bands are spin polarized by the spin-orbit interaction and connect the bulk valence and conduction bands in a topologically non-trivial way. A unique asymmetric Dirac surface state gives rise to a $k$-splitting of its spin polarized electronic channels. These results complement our previously published works on this materials class and re-confirm our discovery of first bulk (3D) topological insulator - topological order in bulk solids. [Invited article for NJP-IOP Focus issue on "Topological Insulators"]

cond-mat.mes-hall↗

Realization of an isolated Dirac node and strongly modulated Spin Texture in the topological insulator Bi2Te3

The development of spin-based applications of topological insulators requires the knowledge and understanding of spin texture configuration maps as they change via gating in the vicinity of an isolated Dirac node. An isolated (graphene-like) Dirac node, however, does not exist in Bi2Te3. While the isolation of surface states via transport channels has been promisingly achieved in Bi2Te3, it is not known how spin textures modulate while gating the surface. Another drawback of Bi2Te3 is that it features multiple band crossings while chemical potential is placed near the Dirac node (at least 3 not one as in Bi2Se3 and many other topological insulators) and its buried Dirac point is not experimentally accessible for the next generation of experiments which require tuning the chemical potential near an isolated (graphene-like) Dirac node. Here, we image the spin texture of Bi2Te3 and suggest a simple modification to realize a much sought out isolated Dirac node regime critical for almost all potential applications (of topological nature) of Bi2Te3. Finally, we demonstrate carrier control in magnetically and nonmagnetically doped Bi2Te3 essential for realizing giant magneto-optical effects and dissipationless spin current devices involving a Bi2Te3-based platform.

cond-mat.mes-hall↗

First observation of Spin-Momentum Helical Locking in Bi2Se3 and Bi2Te3, demonstration of Topological-Order at 300K and a realization of topological-transport-regime

Both the theoretical and experimental discovery of single-Dirac-cone topological-insulator-class was reported at arXiv:0812.2078 (2008) [Y. Xia et.al., Nature Physics 5, 398-402 (2009) http://www.nature.com/nphys/journal/v5/n6/full/nphys1294.html]. Here we report the first observation of Spin-Momentum Helical Locking and Spin-Vortex structures in Bi2Se3 and Bi2Te3, demonstrate the existence of Topological-Order at 300K and report a material realization of topological-transport-regime for helical Dirac fermions. Our results reveal a one-to-one spin-momentum locked Dirac structure in Bi2Se3 and Bi2Te3 that is nearly 100% spin-polarized, which exhibits a tunable topological fermion density in the vicinity of the Kramers' point and can be driven to the long-sought topological-transport-regime. The observed topological nodal Dirac ground state is found to be protected even up to room temperature (300 K). Our results pave the way for future transport based studies of topological insulators, and possible room temperature applications of protected spin-polarized edge channels we observe with spin-ARPES in spintronic technology. All of these new results are made possible due to the Spin-resolved-ARPES (Mott polarimetric) technique [http://www.nature.com/nature/journal/v460/n7259/full/nature08234.html ] .

cond-mat.mes-hall↗

Observation of topologically protected Dirac spin-textures and πBerry's phase in pure Antimony (Sb) and topological insulator BiSb

A topologically ordered material is characterized by a rare quantum organization of electrons that evades the conventional spontaneously broken symmetry based classification of condensed matter. Exotic spin transport phenomena such as the dissipationless quantum spin Hall effect have been speculated to originate from a novel topological order whose identification requires a spin sensitive measurement. Using Spin-resolved-ARPES, we probe the spin degrees of freedom and demonstrate that topological quantum numbers are uniquely determined from spin-texture Berry Phase imaging measurements. Applying this method to pure antimony (Sb) and Bi-Sb, we identify the origin of its novel Topological Order and the negative value of the mirror Chern number. These results taken together constitute the first observation of surface electrons collectively carrying a topological Berry's phase and definite mirror Chern chirality in pure Antimony (Sb) which are the key electronic properties for realizing topological quantum computing via the interface Majorana fermion framework. This paper contains the details of the above mentioned previously reported (Science \textbf{323}, 919 (2009)) results.

cond-mat.mes-hall↗

Time-reversal-protected single-Dirac-cone topological-insulator states in Bi2Te3 and Sb2Te3: Topologically Spin-polarized Dirac fermions with pi Berry's Phase

We show that the strongly spin-orbit coupled materials Bi2Te3 and Sb2Te3 (first non-Bi topological insulator) and their derivatives belong to the Z2 (Time-Reversal-Protected, elastic backscattering suppressed) topological-insulator class. Using a combination of first-principles theoretical calculations and photoemission spectroscopy, we directly show that Bi2Te3 is a large spin-orbit-induced indirect bulk band gap (about 150 meV) semiconductor whose surface is characterized by a single topological spin-Dirac cone. The electronic structure of self-doped Sb2Te3 exhibits similar Z2 topological properties. We demonstrate that the dynamics of surface spin-only Dirac fermions can be controlled through systematic Mn doping, making these materials classes potentially suitable for exploring novel topological physics. We emphasize (theoretically and experimentally) that the Dirac node is well within the bulk-gap and not degenerate with the bulk valence band.

cond-mat.mes-hall↗