arXiv subjects

F. Morand

Publications and source records attributed to F. Morand.

11 recordsLinked to original sources

arXiv2026

Interferometric survey of stellar parameters. Reliable methodology for a direct measurement of the angular diameter in exoplanet host stars

Since their pioneer observations more than thirty years ago, exoplanets have been a major topic among the astrophysics community. Despite their ubiquity, our knowledge of planetary parameters and internal compositions still mostly relies on stellar quantities estimated through evolutionary models, which suffer from a calibration bias, preventing the community to have accurate discussions on the diversity of planets across the Universe. We use our sample to demonstrate the current best reachable precision of the CHARA Array to be $\sim$ 2% on radius determination, with an error budget dominated by the uncertainty on the angular diameter, while systematics are shown to be of the order of 1% thanks to our methodology. While the precision matches values found in the literature, we demonstrate the uniqueness of the present study in the relevance of the results put forward. Finally, we show that our methods naturally translate into an improved accuracy of the planetary parameters, along with an improvement in precision by $\sim$ 50% in radius and $\sim$ 30% in mass.

astro-ph.SR↗

arXiv2026

Interferometric Survey of Stellar Parameters: Limb darkening study with the "Pipeline for Interferometric Measurements of Stars"

Accurate and unbiased determination of stellar parameters is of importance in many astrophysical domains. We therefore present an improved method to estimate stellar parameters, based on interferometric observations and stellar atmosphere models, as well as spectroscopic and photometric data. The fundamental stellar parameters were estimated by fitting a model of intensity profiles to interferometric data over a large spectral window and combining them with spectroscopic and photometric observations as an additional constraint on the fitting. Based on stellar atmosphere models, we have developed an algorithm that trains artificial neural networks (ANNs) to estimate the spectrum and intensity profile of a star over three bands: R, H, and K. The ANNs cover effective temperatures (Teff) ranging from 4500-7000 K for dwarf stars and 2500-8000 K for giant stars, with surface gravities (log g) ranging from 3.0-5.0 dex and -0.5-3.5 dex, respectively, and 12 viewing angles. As a result, consistent and precise stellar parameters, such as Teff, log g, and angular diameter ($θ$), can be estimated. We fitted $ι$ Psc (F7V) and $δ$ Ari (G9.5IIIb) observed with SPICA, MIRC-X, and MYSTIC at the CHARA Array, and archival data of $α$ Cen A and B (G2V and K1V) from VLTI/PIONIER with PIMS. For angular diameter estimations, when fitting with a one-dimensional stellar atmosphere model, we reached a precision of 0.5%. For Teff and radius, we obtained a precision of approximately 1%, while we obtained a precision of 5% for log g. Through evolutionary models, we further show how these constraints can improve the mass and age determination, as they attain a precision of approximately 2% for mass and 5-10% for age.

astro-ph.SR↗

arXiv2026

Multi-chromatic observations of classical Cepheids using the CHARA Array interferometer: Surface brightness-colour relation, projection factor, and limb-darkening

The Baade-Wesselink (BW) method compares the linear and angular variations of Cepheids to derive their distance. This method is limited, however, by the projection factor, which relates the observed radial velocity to the true pulsation velocity of the star. Using simultaneous observations from the CHARA Array interferometer in the K, H, and R bands with the MYSTIC, MIRC-X, and SPICA combiners, respectively, we aim to understand the physics of Cepheid atmospheres better. Applying a specific method to multi-chromatic simultaneous interferometric observations of Cepheids, we derived robust limb-darkened angular diameters that were then used to calibrate the SBCR and study the projection factor. We also developed a strategy to measure the limb-darkening of Cepheids in R, H, and K bands. These measurements were then used to constrain the geometrical component of the projection factor. From the limb-darkened angular diameter curves of three Cepheids, we decreased the scatter of the SBCR in $V-K$ colour to 0.0011 magnitude and to 0.0040 for the SBCR in $G_{BP}-G_{RP}$. These SBCRs are particularly robust because they are based on multi-chromatic diameters and are homogeneous, which previous calibrations for Cepheids were not. For the very first time, we derived the limb-darkening of Cepheids in R, H, and K bands. For $δ$ Cep, we derived an R-based projection factor of $1.275 \pm 0.051$, and the geometrical part obtained from the measured limb-darkening coefficient in R band was estimated to $1.420 \pm 0.016$ (on average), as expected from stellar static and hydrodynamical atmosphere models. The limb-darkening coefficients obtained in H and K band are consistent with models. These results demonstrate that multi-chromatic interferometry can improve the accuracy of the BW method. It is therefore essential to continue the CHARA survey of Cepheids in the coming years.

astro-ph.SR↗

arXiv2026

Interferometric Survey of Stellar Parameters: Mass of the metallic A-type binary $β$ Aur

With the capabilities of the new visible CHARA/SPICA instrument and the multiple spectral band operation of CHARA, our goal is to resolve orbits of short-period binaries and develop a robust framework for combining interferometric, spectroscopic, and photometric observations into a single consistent model. For our target sample, we selected suitable binaries based on brightness, angular separation, and orbital properties based on the expected performance of the CHARA/SPICA instrument. As a case study, we analysed the bright eclipsing binary $β$ Aurigae, composed of two slightly evolved A1 stars. We combined new interferometric observations of $β$ Aur obtained with CHARA/SPICA, MIRC-X, and MYSTIC with archival MIRC data, radial velocities, and light curves. We first derived astrometric positions from interferometric observables and computed an orbital solution. Afterwards, we implemented a unified model, capable of tying interferometric modelling with the ellc code to simultaneously fit all observables using MCMC sampling. We performed a detailed analysis of the noise statistics of each data set and in the end we adopted a profile likelihood approach to account for underestimated noise and systematics. We derived a consistent orbital and physical solution for $β$ Aur through joint modelling. The inclusion of interferometric data tightly constrains the angular semi-major axis and inclination. Using profile likelihood to account for the different intrinsic levels of uncertainty of the fundamentally different observables, we derived the masses of the two stars, $M_1 = 2.359 \pm 0.005$ M$_S$ and $M_2 = 2.293 \pm 0.004$ M$_S$, their radii $R_1 = 2.752 \pm 0.002$ R$_S$ and $R_2 = 2.622 \pm 0.002$ R$_S$, and the distance to the binary, $d = 24.30\pm0.05$ pc.

astro-ph.SR↗

arXiv2026

CHARA/SPICA: The six-telescope visible combiner and near-infrared fringe tracker for the CHARA Array

The suite called Stellar Parameters and Images with a Cophased Array (SPICA) has two interferometric instruments installed at the focus of the CHARA Array located at Mount Wilson, CA. SPICA is made of SPICA-VIS, a fiber-fed six-beam visible spectrograph with three spectral resolutions, and SPICA-FT, a six-beam near-infrared fringe tracker for the fast stabilization of the fringes. SPICA is opening access to imaging in the visible domain with an unprecedented angular resolution down to 0.2 milliarcseconds. It has been designed around a large survey of fundamental parameters of stars over the Hertzsprung- Russell diagram, aiming at understanding the deviations from the standard empirical relations of stellar physics as a function of activity: limb darkening, multiplicity, rotation, winds, and environments. SPICA makes use of the advanced technologies in electron multiplying detectors in the visible and electron- avalanche photodiode arrays in the near-infrared. It benefits from the newly commissioned adaptive optics on the one-meter telescopes of the array. The modules of the visible instrument, SPICA-VIS, optimize the injection of light into single-mode fibers for spatial filtering before spectral dispersion in the image plane. The fringe tracker, SPICA-FT, performs group-delay and phase-delay tracking for six beams in the H band. SPICA-FT can use an all-in-one or ABCD encoding of the fringe signals. SPICA is operational on sky and is close to reaching the expected performance in low spectral resolution, in particular, for the Interferometric Survey of Stellar Parameters (ISSP). More work is still needed to achieve the ultimate performance in terms of sensitivity and to allow operations with higher spectral resolutions.

astro-ph.IM↗

arXiv2020

Precise calibration of the dependence of surface brightness-colour relations on colour and class for late-type stars

Surface brightness-colour relations (SBCRs) are used to derive the stellar angular diameters from photometric observations. They have various astrophysical applications, such as the distance determination of eclipsing binaries or the determination of exoplanet parameters. However, strong discrepancies between the SBCRs still exist in the literature, in particular for early and late-type stars. We aim to calibrate new SBCRs as a function of the spectral type and the luminosity class of the stars. Our goal is also to apply homogeneous criteria to the selection of the reference stars and in view of compiling an exhaustive and up-to-date list of interferometric late-type targets. We implemented criteria to select measurements in the JMMC Measured Diameters Catalog (JMDC). We then applied additional criteria on the photometric measurements used to build the SBCRs, together with stellar characteristics diagnostics. We built SBCRs for F5/K7-II/III, F5/K7-IV/V, M-II/III and M-V stars, with respective RMS of $σ_{F_{V}} = 0.0022$ mag, $σ_{F_{V}} = 0.0044$ mag, $σ_{F_{V}} = 0.0046$ mag, and $σ_{F_{V}} = 0.0038$ mag. This results in a precision on the angular diameter of 1.0\%, 2.0\%, 2.1\%, and 1.7\%, respectively. These relations cover a large $V-K$ colour range of magnitude, from 1 to 7.5. Our work demonstrates that SBCRs are significantly dependent on the spectral type and the luminosity class of the star. Through a new set of interferometric measurements, we demonstrate the critical importance of the selection criteria proposed for the calibration of SBCR. Finally, using the Gaia photometry for our samples, we obtained (G-K) SBCRs with a precision on the angular diameter between 1.1\% and 2.4\%.

astro-ph.SR↗

arXiv2020

Calibrating the surface brightness - color relation for late-type red giants stars in the visible domain using VEGA/CHARA interferometric observations

The surface brightness - color relationship (SBCR) is a poweful tool for determining the angular diameter of stars from photometry. It was for instance used to derive the distance of eclipsing binaries in the Large Magellanic Cloud (LMC), which led to its distance determination with an accuracy of 1%. We calibrate the SBCR for red giant stars in the 2.1 < V-K < 2.5 color range using homogeneous VEGA/CHARA interferometric data secured in the visible domain, and compare it to the relation based on infrared interferometric observations, which were used to derive the distance to the LMC. Observations of eight G-K giants were obtained with the VEGA/CHARA instrument. The derived limb-darkened angular diameters were combined with a homogeneous set of infrared magnitudes in order to constrain the SBCR. The average precision we obtain on the limb-darkened angular diameters of the eight stars in our sample is 2.4%. For the four stars in common observed by both VEGA/CHARA and PIONIER/VLTI, we find a 1 sigma agreement for the angular diameters. The SBCR we obtain in the visible has a dispersion of 0.04 magnitude and is consistent with the one derived in the infrared (0.018 magnitude). The consistency of the infrared and visible angular diameters and SBCR reinforces the result of 1% precision and accuracy recently achieved on the distance of the LMC using the eclipsing-binary technique. It also indicates that it is possible to combine interferometric observations at different wavelengths when the SBCR is calibrated.

astro-ph.SR↗

arXiv2020

Optical interferometry and Gaia measurement uncertainties reveal the physics of asymptotic giant branch stars

Context. Asymptotic giant branch stars are cool luminous evolved stars that are well observable across the Galaxy and populating Gaia data. They have complex stellar surface dynamics Aims. On the AGB star CL Lac, it has been shown that the convection-related variability accounts for a substantial part of the Gaia DR2 parallax error. We observed this star with the MIRC-X beam combiner installed at the CHARA interferometer to detect the presence of stellar surface inhomogeneities. Methods. We performed the reconstruction of aperture synthesis images from the interferometric observations at different wavelengths. Then, we used 3D radiative hydrodynamics simulations of stellar convection with CO5BOLD and the post-processing radiative transfer code Optim3D to compute intensity maps in the spectral channels of MIRC-X observations. Then, we determined the stellar radius and compared the 3D synthetic maps to the reconstructed ones focusing on matching the intensity contrast, the morphology of stellar surface structures, and the photocentre position at two different spectral channels, 1.52 and 1.70 micron, simultaneously. Results. We measured the apparent diameter of CL Lac at two wavelengths and recovered the radius using a Gaia parallax. In addition to this, the reconstructed images are characterised by the presence of a brighter area that largely affects the position of the photocentre. The comparison with 3D simulation shows good agreement with the observations both in terms of contrast and surface structure morphology, meaning that our model is adequate for explaining the observed inhomogenities. Conclusions. This work confirms the presence of convection-related surface structures on an AGB star of Gaia DR2. Our result will help us to take a step forward in exploiting Gaia measurement uncertainties to extract the fundamental properties of AGB stars using appropriate RHD simulations.

astro-ph.SR↗

arXiv2018

On the importance of astronomical refraction for modern Solar astrometric measurements

In this work we study in details the influence of pure astronomical refraction on solar metrologic measurements made from ground-based full disk imagery and provide the tools for correcting the measurements and estimating the associated uncertainties.For a given standard atmospheric model, we first use both analytical and numerical methods in order to test the validity of the commonly or historically used approximations of the differential effect of refraction as a function of zenith distance. For a given refraction model, we provide the exact formulae for correcting solar radius measurements at any heliographic angle and for any zenith distance. Then, using solar images recorded in the near infrared between 2011 and 2016, we show that these corrections can be applied up to $70°$ using the usual approximate formulae and can be extended up to $80°$ of zenith distance provided that a standard atmospheric model and a full numerical integration of the refraction integral are used. We also provide estimates of the absolute uncertainties associated with the differential refraction corrections and show that approximate formulae can be used up to $80°$ of zenith distance for computing these uncertainties. For a given instrumental setup and the knowledge of the uncertainties associated with local weather records, this can be used to fix the maximum zenith distance one can observe depending on the required astrometric accuracy.

astro-ph.SR↗

arXiv2014

MISOLFA solar monitor for the ground PICARD program

Developed at the Observatoire de la Côte d'Azur (OCA) within the framework of the PICARD space mission (Thuillier et al., 2006) and with support from the french spatial agency (CNES), MISOLFA (Moniteur d'Images Solaires Franco-Algérien) is a new generation of daytime turbulence monitor. Its objective is to measure both the spatial and temporal turbulence parameters in order to quantify their effects on the solar diameter measurements that will be made from ground using the qualification model of the SODISM (SOlar Diameter Imager and Surface Mapper) instrument onboard PICARD. The comparison of simultaneous images from ground and space should allow us, with the help of the solar monitor, to find the best procedure possible to measure solar diameter variations from ground on the long term. MISOLFA is now installed at the Calern facility of OCA and PICARD is scheduled to be launched in 2010. We present here the principles of the instrument and the first results obtained on the characteristics of the turbulence observed at Calern observatory using this monitor while waiting for the launch of the space mission.

astro-ph.IM↗

arXiv2013

PICARD SODISM, a space telescope to study the Sun from the middle ultraviolet to the near infrared

The Solar Diameter Imager and Surface Mapper (SODISM) on board the PICARD space mission provides wide-field images of the photosphere and chromosphere of the Sun in five narrow pass bands (centered at 215.0, 393.37, 535.7, 607.1, and 782.2 nm). PICARD is a space mission, which was successfully launched on 15 June 2010 into a Sun synchronous dawn-dusk orbit. It represents a European asset aiming at collecting solar observations that can serve to estimate some of the inputs to Earth climate models. The scientific payload consists of the SODISM imager and of two radiometers, SOVAP (SOlar VAriability PICARD) and PREMOS (PREcision MOnitor Sensor), which carry out measurements that allow estimating the Total Solar Irradiance (TSI) and the Solar Spectral Irradiance (SSI) from the middle ultraviolet to the red. The SODISM telescope monitors solar activity continuously. It thus produces images that can also feed SSI reconstruction models. Further, the objectives of SODISM encompass the probing of the interior of the Sun via helioseismic analysis of observations in intensity (on the solar disc and at the limb), and via astrometric investigations at the limb. The latter addresses especially the spectral dependence of the radial limb shape, and the temporal evolution of the solar diameter and asphericity. After a brief review of its original science objectives, this paper presents the detailed design of the SODISM instrument, its expected performance, and the scheme of its flight operations. Some observations with SODISM are presented and discussed.

astro-ph.IM↗