arXiv subjects

F. Scotti

Publications and source records attributed to F. Scotti.

11 recordsLinked to original sources

arXiv2026

Improved Particle Confinement with Resonant Magnetic Perturbations in DIII-D Tokamak H-Mode Plasmas

Experiments on the DIII-D tokamak have identified a novel regime in which applied resonant magnetic perturbations (RMPs) increase the particle confinement and overall performance. This Letter details a robust range of counter-current rotation over which RMPs cause this density pump-in effect for high confinement (H mode) plasmas. The pump in is shown to be caused by a reduction of the turbulent transport and to be correlated with a change in the sign of the induced neoclassical transport. This novel reversal of the RMP induced transport has the potential to significantly improve reactor relevant, three-dimensional magnetic confinement scenarios.

physics.plasm-ph↗

arXiv2026

The Negative Triangularity Tokamak Path for Fusion Pilot Plants: Experimental Progress and Future Prospects

This paper reviews the experimental progress of negative triangularity (NT), a tokamak configuration where the poloidal cross-section is a reversed-D shape compared to the conventional positive triangularity (PT) shape. NT is a promising reactor scenario that addresses the fundamental tension between performance, exhaust, and robustness. NT studies have accelerated globally across these three pillars over the past several years. While tokamak pilot plants are typically designed for the standard PT H-mode regime, this approach faces significant challenges in balancing high core performance with manageable heat and particle exhaust as well as reliable robustness. In contrast, NT plasmas have achieved H-mode-level confinement while remaining robustly free of the deleterious edge localized mode (ELM) instability. Regarding exhaust, NT offers a larger divertor wetted area on the outboard side and demonstrates compatibility with detachment and operation at high core radiation fraction without the constraints of the L-H power threshold, while also exhibiting low core impurity retention. NT operates with high reproducibility over a wide operating space, demonstrated by robust discharge-to-discharge consistency, and has access to plasmas with very high Greenwald fractions and/or low edge safety factors compared to PT H-mode plasmas. Further research is required to answer outstanding questions related to reactor confinement extrapolation, the optimal triangularity for a reactor, and core-edge integration. NT studies in existing and planned tokamaks are increasing, as is interest in possible reactor concepts. The unique physics and engineering advantages of NT offer a robust and simplified foundation for a viable fusion power plant.

physics.plasm-ph↗

arXiv2026

Non-dimensional confinement scaling in similar negative triangularity plasmas on the DIII-D and TCV tokamaks

Similarity experiments were performed on the DIII-D and TCV tokamaks to explore the scaling of energy confinement in negative triangularity plasmas using non-dimensional variables. Near up-down symmetric plasmas with large top-bottom averaged negative triangularity were created in a lower single null configuration, with the shape of the separatrix being closely matched between the two devices. The normalized energy confinement is found to weakly improve at increasing collisionality and, between the two devices, shows a machine size scaling behavior between Bohm and gyro-Bohm. Engineering scaling on a large DIII-D dataset is in agreement with the non-dimensional experiment.

physics.plasm-ph↗

arXiv2025

Disentangling Core and Edge Mechanisms of the Density Limit in DIII-D Negative Triangularity Plasmas

The density limit is investigated in the DIII-D negative triangularity (NT) plasmas which lack a standard H-mode edge. We find the limit may not be a singular disruptive boundary but a multifaceted density saturation phenomenon governed by distinct core and edge transport mechanisms. Sustained, non-disruptive operation is achieved at densities up to 1.8 times the Greenwald limit ($n_\mathrm{G}$) until the termination of auxiliary heating. Systematic power scans reveal distinct power scalings for the core ($n_e \propto P_\mathrm{SOL}^{0.27\pm0.03}$) and edge ($n_e \propto P_\mathrm{SOL}^{0.42\pm0.04}$) density limits. The edge density saturation is triggered abruptly by the onset of a non-disruptive, high-field side radiative instability that clamps the edge density below $n_\mathrm{G}$. In contrast, the core density continues to rise until it saturates, a state characterized by substantially enhanced core turbulence. Core transport evolves from a diffusive to an intermittent, avalanche-like state, as indicated by heavy-tailed probability density functions (kurtosis $\approx 6$), elevated Hurst exponents, and a $1/f$-type power spectrum. These findings suggest that the density limit in the low-confinement regime is determined by a combination of edge radiative instabilities and core turbulent transport. This distinction provides separate targets for control strategies aimed at extending the operational space of future fusion devices.

physics.plasm-ph↗

arXiv2025

Operation above the Greenwald density limit in high performance DIII-D negative triangularity discharges

The density limit in strongly-shaped negative triangularity (NT) discharges is studied experimentally in the DIII-D tokamak. Record-high Greenwald fractions $f_G$ are obtained, using gas puff injection only, with values up to near 2, where $f_G$ is defined as the ratio of the line-averaged density over $n_G=I_p/(\pi\,a^2)$, with $I_p$[MA] the plasma current and $a$[m] the plasma minor radius. A clear higher operational limit with higher auxiliary power is also demonstrated, with the ohmic density limit about two times lower than with additional neutral beam injection heating. The evolution of the electron density, temperature and pressure profiles are analyzed as well. The core density can be up to twice the Greenwald density and keeps increasing, while the value at the separatrix remains essentially constant and slightly below $n_G$. The edge temperature gradient collapses to near zero and NT plasmas are shown to be resilient to such profiles in terms of disruptivity. We also present the time evolution of the inverse electron pressure scale length with the value at the last closed flux surface (LCFS) decreasing below the value at the normalized radius 0.9 near the density limit, demonstrating the clear drop of confinement starting from the edge. This inverse scale length ``collapse'' at the LCFS also defines well the characteristic behavior of the kinetic profiles approaching a density limit.

physics.plasm-ph↗

arXiv2024

Achievement of highly radiating plasma in negative triangularity and effect of reactor-relevant seeded impurities on confinement and transport

The first achievement of highly radiating plasmas in negative triangularity is shown with an operational space featuring high core radiation at high Greenwald fraction obtained with the injection of reactor-relevant seeded gases. These negative triangularity (NT) shape diverted discharges reach high values of normalized plasma pressure (BetaN > 2) at high radiation fraction with no ELMs. We demonstrate that as long as the impurity level in the core is kept low to avoid excessive fuel dilution and impurity accumulation, integration of NT configuration with high radiation fraction not only is achievable but it can lead to confinement improvement with stabilization effects originating from collisionality, ExB shear and profiles changes due to impurity radiation cooling. The underlying physics mechanism is robust and holds for a variety of impurity species. The absence of the requirement to stay in H-mode translates in a higher core radiation fraction potentially allowed in NT shape effectively mitigating the power exhaust issue. The results presented here demonstrate a path to high performance, ELM free and highly radiative regime with rector-relevant seeding gases making this regime a potential new scenario for reactor operation.

physics.plasm-ph↗

arXiv2024

Characterization of the ELM-free Negative Triangularity Edge on DIII-D

Tokamak plasmas with strong negative triangularity (NT) shaping typically exhibit fundamentally different edge behavior than conventional L-mode or H-mode plasmas. Over the entire DIII-D database, plasmas with sufficiently negative triangularity are found to be inherently free of edge localized modes (ELMs), even at injected powers well above the predicted L-H power threshold. A critical triangularly ($\delta_\mathrm{crit}\simeq-0.15$), consistent with inherently ELM-free operation is identified, beyond which access to the second stability region for infinite-$n$ ballooning modes closes on DIII-D. It is also possible to close access to this region, and thereby prevent an H-mode transition, at weaker average triangularities ($\delta\lesssim\delta_\mathrm{crit}$) provided that at least one of the two x-points is still sufficiently negative. Enhanced low field side magnetic fluctuations during ELM-free operation are consistent with additional turbulence limiting the NT edge gradient. Despite the reduced upper limit on the pressure gradient imposed by ballooning stability, NT plasmas are able to support small pedestals and are typically characterized by an enhancement of edge pressure gradients beyond those found in traditional L-mode plasmas. Further, the pressure gradient inside of this small pedestal is unusually steep, allowing access to high core performance that is competitive with other ELM-free regimes previously achieved on DIII-D. Since ELM-free operation in NT is linked directly to the magnetic geometry, NT fusion pilot plants are predicted to maintain advantageous edge conditions even in burning plasma regimes, potentially eliminating reactor core-integration issues caused by ELMs.

physics.plasm-ph↗

arXiv2024

Broadening of the Divertor Heat Flux Profile in High Confinement Tokamak Fusion Plasmas with Edge Pedestals Limited by Turbulence in DIII-D

Multi-machine empirical scaling predicts an extremely narrow heat exhaust layer in future high magnetic field tokamaks, producing high power densities that require mitigation. In the experiments presented, the width of this exhaust layer is nearly doubled using actuators to increase turbulent transport in the plasma edge. This is achieved in low collisionality, high confinement edge pedestals with their gradients limited by turbulent transport instead of large-scale, coherent instabilities. The exhaust heat flux profile width and divertor leg diffusive spreading both double as a high frequency band of turbulent fluctuations propagating in the electron diamagnetic direction doubles in amplitude. The results are quantitatively reproduced in electromagnetic XGC particle-in-cell simulations which show the heat flux carried by electrons emerges to broaden the heat flux profile, directly supported by Langmuir probe measurements.

physics.plasm-ph↗

arXiv2023

Simultaneous access to high normalized current, pressure, density, and confinement in strongly-shaped diverted negative triangularity plasmas

Strongly-shaped diverted negative triangularity (NT) plasmas in the DIII-D tokamak demonstrate simultaneous access to high normalized current, pressure, density, and confinement. NT plasmas are shown to exist across an expansive parameter space compatible with high fusion power production, revealing surprisingly good core stability properties that compare favorably to conventional positive triangularity plasmas in DIII-D. Non-dimensionalizing the operating space, edge safety factors below 3, normalized betas above 3, Greenwald density fractions above 1, and high-confinement mode (H-mode) confinement qualities above 1 are simultaneously observed, all with a robustly stable edge free from deleterious edge-localized mode instabilities. Scaling of the confinement time with engineering parameters reveals at least a linear dependence on plasma current although with significant power degradation, both in excess of expected H-mode scalings. These results increase confidence that NT plasmas are a viable approach to realize fusion power and open directions for future detailed study.

physics.plasm-ph↗

arXiv2023

Robust avoidance of edge-localized modes alongside gradient formation in the negative triangularity tokamak edge

In a series of high performance diverted discharges on DIII-D, we demonstrate that strong negative triangularity (NT) shaping robustly suppresses all edge-localized mode (ELM) activity over a wide range of plasma conditions: $\langle n\rangle=0.1-1.5\times10^{20}$m$^{-3}$, $P_\mathrm{aux}=0-15$MW and $|B_\mathrm{t}|=1-2.2$T, corresponding to $P_\mathrm{loss}/P_\mathrm{LH08}\sim8$. The full dataset is consistent with the theoretical prediction that magnetic shear in the NT edge inhibits access to ELMing H-mode regimes; all experimental pressure profiles are found to be at or below the infinite-$n$ ballooning stability limit. Importantly, we also report enhanced edge pressure gradients at strong NT that are significantly steeper than in traditional ELM-free L-mode plasmas and provide significant promise for NT reactor integration.

physics.plasm-ph↗

arXiv2021

Evaluation of silicon carbide as a divertor armor material in DIII-D H-mode discharges

Silicon carbide (SiC) represents a promising but largely untested plasma-facing material (PFM) for next-step fusion devices. In this work, an analytic mixed-material erosion model is developed by calculating the physical (via SDTrimSP) and chemical (via empirical scalings) sputtering yield from SiC, Si, and C. The Si content in the near-surface SiC layer is predicted to increase during D plasma bombardment due to more efficient physical and chemical sputtering of C relative to Si. Silicon erosion from SiC thereby occurs primarily from sputtering of the enriched Si layer, rather than directly from the SiC itself. SiC coatings on ATJ graphite, manufactured via chemical vapor deposition, were exposed to repeated H-mode plasma discharges in the DIII-D tokamak to test this model. The qualitative trends from analytic modeling are reproduced by the experimental measurements, obtained via spectroscopic inference using the S/XB method. Quantitatively the model slightly under-predicts measured erosion rates, which is attributed to uncertainties in the ion impact angle distribution, as well as the effect of edge-localized modes. After exposure, minimal changes to the macroscopic or microscopic surface morphology of the SiC coatings were observed. Compositional analysis reveals Si enrichment of about 10%, in line with expectations from the erosion model. Extrapolating to a DEMO-type device, an order-of-magnitude decrease in impurity sourcing, and up to a factor of 2 decrease in impurity radiation, is expected with SiC walls, relative to graphite, if low C plasma impurity content can be achieved. These favorable erosion properties motivate further investigations of SiC as a low-Z, non-metallic PFM.

physics.plasm-ph↗