arXiv subjects

F. Simon

Publications and source records attributed to F. Simon.

At least 37 records · Page 2Linked to original sources

arXiv2022

Polarised superlocalization in magnetic nanoparticle hyperthermia

Magnetic hyperthermia is an adjuvant therapy for cancer where injected magnetic nanoparticles are used to transfer energy from the time-dependent applied magnetic field into the surrounding medium. Its main importance is to be able to increase the temperature of the human body locally. This localization can be further increased by using a combination of static and alternating external magnetic fields. For example, if the static field is inhomogeneous and the alternating field is oscillating then the energy transfer and consequently, the heat generation is non-vanishing only where the gradient field is zero which results in superlocalization. Our goal here is to study theoretically and experimentally whether the perpendicular or parallel combination of static and oscillating fields produce a better superlocalization. A considerable polarisation effect in superlocalization for small frequencies and large field strengths which are of great importance in practice is found.

cond-mat.soft↗

arXiv2022

Energy reconstruction of hadronic showers at the CERN PS and SPS using the Semi-Digital Hadronic Calorimeter

The CALICE Semi-Digital Hadronic CALorimeter (SDHCAL) is the first technological prototype in a family of high-granularity calorimeters developed by the CALICE Collaboration to equip the experiments of future lepton colliders. The SDHCAL is a sampling calorimeter using stainless steel for absorber and Glass Resistive Plate Chambers (GRPC) as a sensitive medium. The GRPC are read out by 1~cm $\times$ 1~cm pickup pads combined to a multi-threshold electronics. The prototype was exposed to hadron beams in both the CERN PS and the SPS beamlines in 2015 allowing the test of the SDHCAL in a large energy range from 3~GeV to 80~GeV. After introducing the method used to select the hadrons of our data and reject the muon and electron contamination, we present the energy reconstruction approach that we apply to the data collected from both beamlines and we discuss the response linearity and the energy resolution of the SDHCAL. The results obtained in the two beamlines confirm the excellent SDHCAL performance observed with the data collected with the same prototype in the SPS beamline in 2012. They also show the stability of the SDHCAL in different beam conditions and different time periods.

hep-ex↗

arXiv2021

Ultrahigh nitrogen-vacancy center concentration in diamond

High concentration of negatively charged nitrogen-vacancy ($\text{NV}^{-}$) centers was created in diamond single crystals containing approximately 100 ppm nitrogen using electron and neutron irradiation and subsequent thermal annealing in a stepwise manner. Continuous wave electron paramagnetic resonance (EPR) was used to determine the transformation efficiency from isolated N atoms to $\text{NV}^{-}$ centers in each production step and its highest value was as high as 17.5 %. Charged vacancies are formed after electron irradiation as shown by EPR spectra, but the thermal annealing restores the sample quality as the defect signal diminishes. We find that about 25 % of the vacancies form NVs during the annealing process. The large $\text{NV}^{-}$ concentration allows to observe orientation dependent spin-relaxation times and also the determination of the hyperfine and quadrupole coupling constants with high precision using electron spin echo (ESE) and electron-nuclear double resonance (ENDOR). We also observed the EPR signal associated with the so-called W16 centers, whose spectroscopic properties might imply a nitrogen dimer-vacancy center for its origin.

cond-mat.mtrl-sci↗

arXiv2021

Linearly controlled arrangement of $^{13}$C isotopes in single-wall carbon nanotubes

The growth of single wall carbon nanotubes (SWCNT) inside host SWCNTs remains a compelling alternative to the conventional catalyst induced growth processes. It not only provides a catalyst free process but the ability to control the constituents of the inner tube if appropriate starting molecules are used. We report herein the growth of inner SWCNTs from $^{13}$C labeled toluene and natural carbon C$_{60}$. The latter molecule is essentially a stopper which acts to retain the smaller toluene. The Raman spectrum of the inner nanotubes is anomalous as it contains a highly isotope shifted "tail", which cannot be explained by assuming a homogeneous distribution of the isotopes. {\color{black}Semi-empirical} calculations of the Raman modes indicate that this unsual effect is explicable if small clusters of $^{13}$C are assumed. This indicates the absence of carbon diffusion during the inner tube growth. When combined with appropriate molecular recognition, this may enable a molecular engineering of the atomic and isotope composition of the inner tubes.

cond-mat.mes-hall↗

arXiv2020

Optical-microwave pump-probe studies of electronic properties in novel materials

Combined microwave-optical pump-probe methods are emerging to study the quantum state of spin qubit centers and the charge dynamics in semiconductors. A major hindrance is the limited bandwidth of microwave irradiation/detection circuitry which could be overcome with the use of broadband coplanar waveguides (CPW). We present the development and performance characterization of two spectrometers: an optically detected magnetic resonance spectrometer (ODMR) and a microwave detected photoconductivity measurement. In the first method light serves as detection and microwaves excite the investigated medium, while in the second the roles are interchanged. The performance is demonstrated by measuring ODMR maps on the nitrogen-vacancy center in diamond and time resolved photoconductivity in p-doped silicon. The results demonstrate both an efficient coupling of the microwave irradiation to the samples as well as an excellent sensitivity for minute changes in sample conductivity.

physics.app-ph↗

arXiv2020

Incidence of Quantum Confinement on Dark Triplet Excitons in Carbon Nanotubes

Photophysics of single-wall carbon nanotubes (SWCNTs) is intensively studied due to their potential application in light harvesting and optoelectronics. Excited states of SWCNTs form strongly bound electron-hole pairs, excitons, of which only singlet excitons participate in application relevant optical transitions. Long-living spin-triplet states hinder applications but they emerge as candidates for quantum information storage. Therefore knowledge of the triplet exciton energy structure, in particular in a SWCNT chirality dependent manner, is greatly desired. We report the observation of light emission from triplet state recombination, i.e. phosphorescence, for several SWCNT chiralities using a purpose-built spectrometer. This yields the singlet-triplet gap as a function of SWCNT diameter and it follows predictions based on quantum confinement effects. Saturation under high microwave power (up to 10 W) irradiation allows to determine the spin-relaxation time for triplet states. Our study sensitively discriminates whether the lowest optically active state is populated from an excited state on the same nanotube or through Förster exciton energy transfer from a neighboring nanotube.

cond-mat.mes-hall↗

arXiv2020

Tuning Conductivity and Spin Dynamics in Few-Layer Graphene via In Situ Potassium Exposure

Chemical modification, such as intercalation or doping of novel materials is of great importance for exploratory material science and applications in various fields of physics and chemistry. In the present work, we report the systematic intercalation of chemically exfoliated few-layer graphene with potassium while monitoring the sample resistance using microwave conductivity. We find that the conductivity of the samples increases by about an order of magnitude upon potassium exposure. The increased of number of charge carriers deduced from the ESR intensity also reflects this increment. The doped phases exhibit two asymmetric Dysonian lines in ESR, a usual sign of the presence of mobile charge carriers. The width of the broader component increases with the doping steps, however, the narrow components seem to have a constant line width.

cond-mat.mtrl-sci↗

arXiv2020

Effects of misalignment on response uniformity of SiPM-on-tile technology for highly granular calorimeters

The SiPM-on-tile technology, consisting of plastic scintillator tiles with typical sizes of a few cm$^2$ mounted on top of SiPMs, has been developed within the CALICE collaboration to enable automatized mass production of active elements for scintillator-based highly granular calorimeters. We present a study of the impact of misalignment of the scintillator tile with respect to the photon sensor on the response uniformity and on the absolute light yield for square, hexagonal and rhomboidal scintillator tiles of different sizes. A misalignment results in the formation of a dipole asymmetry of the spatial distribution of the light yield, with a magnitude that scales linearly with the size of the displacement, while the average light yield over the full active area of the tile is not affected. These results provide guidance for the definition of tolerances for the production and assembly of large calorimeter systems, showing that an alignment precision of approximately 500 $μ$m or better allows to limit the impact to acceptable levels.

physics.ins-det↗

arXiv2020

Ultralong spin lifetime in light alkali atom doped graphene

Today's great challenges of energy and informational technologies are addressed with a singular compound, the Li and Na doped few layer graphene. All what is impossible for graphite (homogeneous and high level Na doping), and unstable for single layer graphene, works very well for this structure. The transformation of the Raman G line to a Fano lineshape and the emergence of strong, metallic-like electron spin resonance (ESR) modes, attest the high level of graphene doping in liquid ammonia for both kinds of alkali atoms. The spin-relaxation time in our materials, deduced from the ESR line-width, is 6-8 ns, which is comparable to the longest values found in spin-transport experiments on ultrahigh mobility graphene flakes. This could qualify our material as promising candidate in spintronics devices. On the other hand, the successful sodium doping, this being a highly abundant metal, could be an encouraging alternative to lithium batteries.

cond-mat.mtrl-sci↗

arXiv2020

Particle Identification Using Boosted Decision Trees in the Semi-Digital Hadronic Calorimeter Prototype

The CALICE Semi-Digital Hadronic CALorimeter (SDHCAL) prototype using Glass Resistive Plate Chambers as a sensitive medium is the first technological prototype of a family of high-granularity calorimeters developed by the CALICE collaboration to equip the experiments of future leptonic colliders. It was exposed to beams of hadrons, electrons and muons several times in the CERN PS and SPS beamlines between 2012 and 2018. We present here a new method of particle identification within the SDHCAL using the Boosted Decision Trees (BDT) method applied to the data collected in 2015. The performance of the method is tested first with Geant4-based simulated events and then on the data collected by the SDHCAL in the energy range between 10 and 80~GeV with 10~GeV energy steps. The BDT method is then used to reject the electrons and muons that contaminate the SPS hadron beams.

physics.ins-det↗

arXiv2020

Non-exponential magnetic relaxation in magnetic nanoparticles for hyperthermia

Magnetic nanoparticle based hyperthermia emerged as a potential tool for treating malignant tumours. The efficiency of the method relies on the knowledge of magnetic properties of the samples; in particular, knowledge of the frequency dependent complex magnetic susceptibility is vital to optimize the irradiation conditions and to provide feedback for material science developments. We study the frequency-dependent magnetic susceptibility of an aqueous ferrite suspension for the first time using non-resonant and resonant radiofrequency reflectometry. We identify the optimal measurement conditions using a standard solenoid coil, which is capable of providing the complex magnetic susceptibility up to 150 MHz. The result matches those obtained from a radiofrequency resonator for a few discrete frequencies. The agreement between the two different methods validates our approach. Surprisingly, the dynamic magnetic susceptibility cannot be explained by an exponential magnetic relaxation behavior even when we consider a particle size-dependent distribution of the relaxation parameter.

physics.app-ph↗

arXiv2019

Ultrafast sensing of photoconductivity decay using microwave resonators

Microwave reflectance probed photoconductivity (or $μ$-PCD) measurement represents a contactless and non-invasive method to characterize impurity content in semiconductors. Major drawbacks of the method include a difficult separation of reflectance due to dielectric and conduction effects and that the $μ$-PCD signal is prohibitively weak for highly conducting samples. Both of these limitations could be tackled with the use of microwave resonators due to the well-known sensitivity of resonator parameters to minute changes in the material properties combined with a null measurement. A general misconception is that time resolution of resonator measurements is limited beyond their bandwidth by the readout electronics response time. While it is true for conventional resonator measurements, such as those employing a frequency sweep, we present a time-resolved resonator parameter readout method which overcomes these limitations and allows measurement of complex material parameters and to enhance $μ$-PCD signals with the ultimate time resolution limit being the resonator time constant. This is achieved by detecting the transient response of microwave resonators on the timescale of a few 100 ns \emph{during} the $μ$-PCD decay signal. The method employs a high-stability oscillator working with a fixed frequency which results in a stable and highly accurate measurement.

physics.app-ph↗

arXiv2019

Improved laser based photoluminescence on single-walled carbon nanotubes

Photoluminescence (PL) has become a common tool to characterize various properties of single-walled carbon nanotube (SWCNT) chirality distribution and the level of tube individualization in SWCNT samples. Most PL studies employ conventional lamp light sources whose spectral distribution is filtered with a monochromator but this results in a still impure spectrum with a low spectral intensity. Tunable dye lasers offer a tunable light source which cover the desired excitation wavelength range with a high spectral intensity, but their operation is often cumbersome. Here, we present the design and properties of an improved dye-laser system which is based on a Q-switch pump laser. The high peak power of the pump provides an essentially threshold-free lasing of the dye laser which substantially improves the operability. It allows operation with laser dyes such as Rhodamin 110 and Pyridin 1, which are otherwise on the border of operation of our laser. Our system allows to cover the 540-730 nm wavelength range with 4 dyes. In addition, the dye laser output pulses closely follow the properties of the pump this it directly provides a time resolved and tunable laser source. We demonstrate the performance of the system by measuring the photoluminescence map of a HiPco single-walled carbon nanotubes sample.

physics.app-ph↗

arXiv2019

Top-Quark Physics at the CLIC Electron-Positron Linear Collider

The Compact Linear Collider (CLIC) is a proposed future high-luminosity linear electron-positron collider operating at three energy stages, with nominal centre-of-mass energies: 380 GeV, 1.5 TeV, and 3 TeV. Its aim is to explore the energy frontier, providing sensitivity to physics beyond the Standard Model (BSM) and precision measurements of Standard Model processes with an emphasis on Higgs boson and top-quark physics. The opportunities for top-quark physics at CLIC are discussed in this paper. The initial stage of operation focuses on top-quark pair production measurements, as well as the search for rare flavour-changing neutral current (FCNC) top-quark decays. It also includes a top-quark pair production threshold scan around 350 GeV which provides a precise measurement of the top-quark mass in a well-defined theoretical framework. At the higher-energy stages, studies are made of top-quark pairs produced in association with other particles. A study of ttH production including the extraction of the top Yukawa coupling is presented as well as a study of vector boson fusion (VBF) production, which gives direct access to high-energy electroweak interactions. Operation above 1 TeV leads to more highly collimated jet environments where dedicated methods are used to analyse the jet constituents. These techniques enable studies of the top-quark pair production, and hence the sensitivity to BSM physics, to be extended to higher energies. This paper also includes phenomenological interpretations that may be performed using the results from the extensive top-quark physics programme at CLIC.

hep-ex↗

arXiv2019

The generic phase diagram of spin relaxation in solids and the Loschmidt echo

The spin relaxation time in solids is determined by several competing energy scales and processes and distinct methods are called for to analyze the various regimes. We present a stochastic model for the spin dynamics in solids which is equivalent to solving the spin Boltzmann equation and takes the relevant processes into account on equal footing. The calculations reveal yet unknown parts of the spin-relaxation phase diagram, where strong spin-dephasing occurs in addition to spin-relaxation. Spin-relaxation times are obtained for this regime by introducing the numerical Loschmidt echo. This allows us to construct a generic approximate formula for the spin-relaxation time, $τ_{\text{s}}$, for the entire phase diagram, involving the quasiparticle scattering rate, $Γ$, spin-orbit coupling strength, $\mathcal{L}$, and a magnetic term, $Δ_{\text{Z}}$ due to the Zeeman effect. The generic expression reads as $\hbar/τ_{\text{s}}\approx Γ\cdot \mathcal{L}^2 /(Γ^2+\mathcal{L}^2+Δ_{\text{Z}}^2)$.

cond-mat.str-el↗

arXiv2019

Characterisation of different stages of hadronic showers using the CALICE Si-W ECAL physics prototype

A detailed investigation of hadronic interactions is performed using $π^-$-mesons with energies in the range 2--10 GeV incident on a high granularity silicon-tungsten electromagnetic calorimeter. The data were recorded at FNAL in 2008. The region in which the $π^-$-mesons interact with the detector material and the produced secondary particles are characterised using a novel track-finding algorithm that reconstructs tracks within hadronic showers in a calorimeter in the absence of a magnetic field. The principle of carrying out detector monitoring and calibration using secondary tracks is also demonstrated.

physics.ins-det↗

arXiv2019

Improved alkali intercalation of carbonaceous materials in ammonia solution

Alkali intercalated graphite compounds represent a compelling modification of carbon with significant application potential and various fundamentally important phases. We report on the intercalation of graphite with alkali atoms (Li and K) using liquid ammonia solution as mediating agent. Alkali atoms dissolve well in liquid ammonia which simplifies and speeds up the intercalation process, and it also avoids the high temperature formation of alkali carbides. Optical microscopy, Raman, and electron spin resonance spectroscopy attest that the prepared samples are highly and homogeneously intercalated to a level approaching Stage-I intercalation compounds. The method and the synthesis route may serve as a starting point for the various forms of alkali atom intercalated carbon compounds (including carbon nanotubes and graphene), which could be exploited in energy storage and further chemical modifications.

cond-mat.str-el↗

arXiv2019

Detector Technologies for CLIC

The Compact Linear Collider (CLIC) is a high-energy high-luminosity linear electron-positron collider under development. It is foreseen to be built and operated in three stages, at centre-of-mass energies of 380 GeV, 1.5 TeV and 3 TeV, respectively. It offers a rich physics program including direct searches as well as the probing of new physics through a broad set of precision measurements of Standard Model processes, particularly in the Higgs-boson and top-quark sectors. The precision required for such measurements and the specific conditions imposed by the beam dimensions and time structure put strict requirements on the detector design and technology. This includes low-mass vertexing and tracking systems with small cells, highly granular imaging calorimeters, as well as a precise hit-time resolution and power-pulsed operation for all subsystems. A conceptual design for the CLIC detector system was published in 2012. Since then, ambitious R&D programmes for silicon vertex and tracking detectors, as well as for calorimeters have been pursued within the CLICdp, CALICE and FCAL collaborations, addressing the challenging detector requirements with innovative technologies. This report introduces the experimental environment and detector requirements at CLIC and reviews the current status and future plans for detector technology R&D.

physics.ins-det↗