arXiv subjects

F. Thevenin

Publications and source records attributed to F. Thevenin.

At least 19 recordsLinked to original sources

arXiv2024

High speed stars: III. Detailed abundances and binary nature of the extreme speed star GHS143

The Gaia satellite has provided the community with three releases containing astrometrical and photometric data as well as by products, such as stellar parameters and variability indicators. By selecting in the Gaia database, one can select stars with the requested characteristics, such as high speed. At present any selection is based on available Gaia releases including a subset of the observations. This, for some stars, can show some limitations, for example there is still not a sufficient number of observations to detect binarity. We investigated a star selected in Gaia EDR3 for its high speed that appears unbound to the Galaxy. We requested high-quality spectra to derive more information on the star. {From the spectroscopic investigation we confirm the low metallicity content of the star, and we derive a detailed chemical composition. The star is poor in carbon and very rich in oxygen: [(C+N+O)/Fe]=+0.65. From the two spectra observed we conclude that the star is in a binary system and from the investigation of the ionisation balance we derive that the star is closer than implied by the Gaia DR3 parallax, and thus has a a lower intrinsic luminosity. The star is probably still unbound, but there is the possibility that it is bound to the Galaxy. Its low carbon abundance suggests that the star was formed in a dwarf galaxy.

astro-ph.SR↗

arXiv2023

Gaia Focused Product Release: A catalogue of sources around quasars to search for strongly lensed quasars

Context. Strongly lensed quasars are fundamental sources for cosmology. The Gaia space mission covers the entire sky with the unprecedented resolution of $0.18$" in the optical, making it an ideal instrument to search for gravitational lenses down to the limiting magnitude of 21. Nevertheless, the previous Gaia Data Releases are known to be incomplete for small angular separations such as those expected for most lenses. Aims. We present the Data Processing and Analysis Consortium GravLens pipeline, which was built to analyse all Gaia detections around quasars and to cluster them into sources, thus producing a catalogue of secondary sources around each quasar. We analysed the resulting catalogue to produce scores that indicate source configurations that are compatible with strongly lensed quasars. Methods. GravLens uses the DBSCAN unsupervised clustering algorithm to detect sources around quasars. The resulting catalogue of multiplets is then analysed with several methods to identify potential gravitational lenses. We developed and applied an outlier scoring method, a comparison between the average BP and RP spectra of the components, and we also used an extremely randomised tree algorithm. These methods produce scores to identify the most probable configurations and to establish a list of lens candidates. Results. We analysed the environment of 3 760 032 quasars. A total of 4 760 920 sources, including the quasars, were found within 6" of the quasar positions. This list is given in the Gaia archive. In 87\% of cases, the quasar remains a single source, and in 501 385 cases neighbouring sources were detected. We propose a list of 381 lensed candidates, of which we identified 49 as the most promising. Beyond these candidates, the associate tables in this Focused Product Release allow the entire community to explore the unique Gaia data for strong lensing studies further.

astro-ph.GA↗

arXiv2023

Oxygen, sulfur, and iron radial abundance gradients of classical Cepheids across the Galactic thin disk

Classical Cepheids (CCs) are solid distance indicators and tracers of young stellar populations. Our aim is to provide iron, oxygen, and sulfur abundances for the largest and most homogeneous sample of Galactic CCs ever analyzed. The current sample covers a wide range in Galactocentric distances (RG), pulsation modes and periods. High-resolution and high S/N spectra collected with different spectrographs were adopted to estimate the atmospheric parameters. Individual distances are based on Gaia trigonometric parallaxes or on near-infrared Period-Luminosity relations. We found that Fe and alpha-element radial gradients based on CCs display a well-defined change in the slope for RG larger than 12 kpc. Radial gradients based on open clusters, covering a wide range in age, display similar trends, meaning that the flattening in the outer disk is an intrinsic feature of the radial gradients since it is independent of age. Empirical evidence indicates that the radial gradient for S is steeper than for Fe. The difference in the slope is a factor of two in the linear fit. We also found that S is, on average, under-abundant compared with O. We performed a detailed comparison with Galactic chemical evolution models and we found that a constant Star Formation Efficiency for RG larger than 12 kpc takes account for the flattening in both Fe and alpha-elements. To further constrain the impact that predicted S yields for massive stars have on radial gradients, we adopted a "toy model" and we found that the flattening in the outermost regions requires a decrease of a factor of four in the current S predictions. Sulfur photospheric abundances, compared with other alpha-elements, have the key advantage of being a volatile element. Therefore, stellar S abundances can be directly compared with nebular S abundances in external galaxies.

astro-ph.GA↗

arXiv2022

Gaia DR3: Apsis III -- Non-stellar content and source classification

Context. As part of the third Gaia data release, we present the contributions of the non-stellar and classification modules from the eighth coordination unit (CU8) of the Data Processing and Analysis Consortium, which is responsible for the determination of source astrophysical parameters using Gaia data. This is the third in a series of three papers describing the work done within CU8 for this release. Aims. For each of the five relevant modules from CU8, we summarise their objectives, the methods they employ, their performance, and the results they produce for Gaia DR3. We further advise how to use these data products and highlight some limitations. Methods. The Discrete Source Classifier (DSC) module provides classification probabilities associated with five types of sources: quasars, galaxies, stars, white dwarfs, and physical binary stars. A subset of these sources are processed by the Outlier Analysis (OA) module, which performs an unsupervised clustering analysis, and then associates labels with the clusters to complement the DSC classification. The Quasi Stellar Object Classifier (QSOC) and the Unresolved Galaxy Classifier (UGC) determine the redshifts of the sources classified as quasar and galaxy by the DSC module. Finally, the Total Galactic Extinction (TGE) module uses the extinctions of individual stars determined by another CU8 module to determine the asymptotic extinction along all lines of sight for Galactic latitudes |b| > 5 deg. Results. Gaia DR3 includes 1591 million sources with DSC classifications; 56 million sources to which the OA clustering is applied; 1.4 million sources with redshift estimates from UGC; 6.4 million sources with QSOC redshift; and 3.1 million level 9 HEALPixes of size 0.013 squared degree, where the extinction is evaluated by TGE.

astro-ph.GA↗

arXiv2022

Gaia Data Release 3: Hot-star radial velocities

The second Gaia data release, DR2, contained radial velocities of stars with effective temperatures up to Teff = 6900 K. The third data release, Gaia DR3, extends this up to Teff = 14,500 K. We derive the radial velocities for hot stars (i.e. in the Teff = 6900 - 14,500 K range) from data obtained with the Radial Velocity Spectrometer (RVS) on board Gaia. The radial velocities were determined by the standard technique of measuring the Doppler shift of a template spectrum that was compared to the observed spectrum. The RVS wavelength range is very limited. The proximity to and systematic blueward offset of the calcium infrared triplet to the hydrogen Paschen lines in hot stars can result in a systematic offset in radial velocity. For the hot stars, we developed a specific code to improve the selection of the template spectrum, thereby avoiding this systematic offset. With the improved code, and with the correction we propose to the DR3 archive radial velocities, we obtain values that agree with reference values to within 3 km/s (in median). Because of the required S/N for applying the improved code, the hot star radial velocities in DR3 are mostly limited to stars with a magnitude in the RVS wavelength band <= 12 mag.

astro-ph.SR↗

arXiv2020

Metallicity Distribution of Galactic Halo Field RR Lyrae, and the Effect of Metallicity on their Pulsation Properties

We present our analysis of a large sample (over 150k) of candidate Galactic RR Lyrae (RRL) stars for which we derived high quality photometry at UV, optical and infrared wavelengths, using data from publicly available surveys. For a sub-sample of these stars (~2,400 fundamental mode field RRLs) we have measured their individual metallicity using the Delta S method, resulting in the largest and most homogeneous spectroscopic data set collected for RRLs. We use this sample to study the metallicity distribution in the Galactic Halo, including the long-standing problem of the Oosterhoff dichotomy among Galactic globular clusters. We also analyze the dependence of their pulsation properties, and in particular the shape of their infrared light curves, from their [Fe/H] abundance.

astro-ph.GA↗

arXiv2019

Chemical Compositions of Field and Globular Cluster RR~Lyrae Stars: II. omega Centauri

We present a detailed spectroscopic analysis of RR Lyrae (RRL) variables in the globular cluster NGC 5139 (omega Cen). We collected optical (4580-5330 A), high resolution (R = 34,000), high signal-to-noise ratio (200) spectra for 113 RRLs with the multi-fiber spectrograph M2FS at the Magellan/Clay Telescope at Las Campanas Observatory. We also analysed high resolution (R = 26,000) spectra for 122 RRLs collected with FLAMES/GIRAFFE at the VLT, available in the ESO archive. The current sample doubles the literature abundances of cluster and field RRLs in the Milky Way based on high resolution spectra. Equivalent width measurements were used to estimate atmospheric parameters, iron, and abundance ratios for alpha (Mg, Ca, Ti), iron peak (Sc, Cr, Ni, Zn), and s-process (Y) elements. We confirm that omega Cen is a complex cluster, characterised by a large spread in the iron content: -2.58 < [Fe/H] < -0.85. We estimated the average cluster abundance as [Fe/H] = -1.80 +- 0.03, with sigma = 0.33 dex. Our findings also suggest that two different RRL populations coexist in the cluster. The former is more metal-poor ([Fe/H] < -1.5), with almost solar abundance of Y. The latter is less numerous, more metal-rich, and yttrium enhanced ([Y/Fe] > 0.4). This peculiar bimodal enrichment only shows up in the s-process element, and it is not observed among lighter elements, whose [X/Fe] ratios are typical for Galactic globular clusters.

astro-ph.SR↗

arXiv2018

On a new method to estimate distance, reddening and metallicity of RR Lyrae stars using optical/near-infrared ($B$,$V$,$I$,$J$,$H$,$K$) mean magnitudes: $ω$ Centauri as a first test case

We developed a new approach to provide accurate estimates of metal content, reddening and true distance modulus of RR Lyrae stars (RRLs). The method is based on homogeneous optical ($BVI$) and near-infrared ($JHK$) mean magnitudes and on predicted period--luminosity--metallicity relations ($IJHK$) and absolute mean magnitude--metallicity relations ($BV$). We obtained solutions for three different RRL samples in $ω$ Cen: first overtone (RRc,~90), fundamental (RRab,~80) and global (RRc+RRab) in which the period of first overtones were fundamentalized. The metallicity distribution shows a well defined peak at [Fe/H]$\sim$--1.98 and a standard deviation of $σ$=0.54 dex. The spread is, as expected, metal-poor ([Fe/H]$\le$--2.3) objects. The current metallicity distribution is $\sim$0.3 dex more metal-poor than similar estimates for RRLs available in the literature. The difference vanishes if the true distance modulus we estimated is offset by --0.06/--0.07~mag in true distance modulus. We also found a cluster true distance modulus of $μ$=13.720$\pm$0.002$\pm$0.030~mag, where the former error is the error on the mean and the latter is the standard deviation. Moreover, we found a cluster reddening of E($B-V$)=0.132$\pm$0.002$\pm$0.028~mag and spatial variations of the order of a few arcmin across the body of the cluster. Both the true distance modulus and the reddening are slightly larger than similar estimates available in the literature, but the difference is within 1$σ$. The metallicity dependence of distance diagnostics agree with theory and observations, but firm constraints require accurate and homogeneous spectroscopic measurements.

astro-ph.SR↗

arXiv2018

On a new and homogeneous metallicity scale for Galactic classical Cepheids - I. Physical parameters

We gathered more than 1130 high-resolution optical spectra for more than 250 Galactic classical Cepheids. The spectra were collected with different optical spectrographs: UVES at VLT, HARPS at 3.6m, FEROS at 2.2m MPG/ESO, and STELLA. To improve the effective temperature estimates, we present more than 150 new line depth ratio (LDR) calibrations that together with similar calibrations already available in the literature allowed us to cover a broad range in wavelength (between 5348 and 8427 angstrom) and in effective temperatures (between 3500 and 7700 K). This means the unique opportunity to cover both the hottest and coolest phases along the Cepheid pulsation cycle and to limit the intrinsic error on individual measurements at the level of ~100 K. Thanks to the high signal-to-noise ratio of individual spectra we identified and measured hundreds of neutral and ionized lines of heavy elements, and in turn, have the opportunity to trace the variation of both surface gravity and microturbulent velocity along the pulsation cycle. The accuracy of the physical parameters and the number of Fe I (more than one hundred) and Fe II (more than ten) lines measured allowed us to estimate mean iron abundances with a precision better than 0.1 dex. Here we focus on 14 calibrating Cepheids for which the current spectra cover either the entire or a significant portion of the pulsation cycle. The current estimates of the variation of the physical parameters along the pulsation cycle and of the iron abundances agree quite well with similar estimates available in the literature. Independent homogeneous estimates of both physical parameters and metal abundances based on different approaches that can constrain possible systematics are highly encouraged.

astro-ph.SR↗

arXiv2018

Gaia Data Release 2: Processing the spectroscopic data

The Gaia Data Release 2 contains the 1st release of radial velocities complementing the kinematic data of a sample of about 7 million relatively bright, late-type stars. Aims: This paper provides a detailed description of the Gaia spectroscopic data processing pipeline, and of the approach adopted to derive the radial velocities presented in DR2. Methods: The pipeline must perform four main tasks: (i) clean and reduce the spectra observed with the Radial Velocity Spectrometer (RVS); (ii) calibrate the RVS instrument, including wavelength, straylight, line-spread function, bias non-uniformity, and photometric zeropoint; (iii) extract the radial velocities; and (iv) verify the accuracy and precision of the results. The radial velocity of a star is obtained through a fit of the RVS spectrum relative to an appropriate synthetic template spectrum. An additional task of the spectroscopic pipeline was to provide 1st-order estimates of the stellar atmospheric parameters required to select such template spectra. We describe the pipeline features and present the detailed calibration algorithms and software solutions we used to produce the radial velocities published in DR2. Results: The spectroscopic processing pipeline produced median radial velocities for Gaia stars with narrow-band near-IR magnitude Grvs < 12 (i.e. brighter than V~13). Stars identified as double-lined spectroscopic binaries were removed from the pipeline, while variable stars, single-lined, and non-detected double-lined spectroscopic binaries were treated as single stars. The scatter in radial velocity among different observations of a same star, also published in DR2, provides information about radial velocity variability. For the hottest (Teff > 7000 K) and coolest (Teff < 3500 K) stars, the accuracy and precision of the stellar parameter estimates are not sufficient to allow selection of appropriate templates. [Abridged]

astro-ph.GA↗

arXiv2018

On the chemical abundances of Miras in clusters: V1 in the metal-rich globular NGC 5927

We present the first spectroscopic abundance determination of iron, alpha-elements (Si, Ca and Ti) and sodium for the Mira variable V1 in the metal-rich globular cluster NGC 5927. We use high-resolution (R~ 28,000), high signal-to-noise ratio (~200) spectra collected with WINERED, a near-infrared (NIR) spectrograph covering simultaneously the wavelength range 0.91--1.35 micron. The effective temperature and the surface gravity at the pulsation phase of the spectroscopic observation were estimated using both optical (V) and NIR time-series photometric data. We found that the Mira is metal-rich ([Fe/H]=-0.55 \pm 0.15) and moderately alpha-enhanced ([alpha/Fe]=0.15 \pm 0.01, sigma=0.2). These values agree quite well with the mean cluster abundances based on high-resolution optical spectra of several cluster red giants available in the literature ([Fe/H]=-0.47 \pm 0.06, [alpha/Fe]=+0.24 \pm 0.05). We also found a Na abundance of +0.35 \pm 0.20 that is higher than the mean cluster abundance based on optical spectra (+0.18 \pm 0.13). However, the lack of similar spectra for cluster red giants and that of corrections for departures from local-thermodynamical equilibrium prevents us from establishing whether the difference is intrinsic or connected with multiple populations. These findings indicate a strong similarity between optical and NIR metallicity scales in spite of the difference in the experimental equipment, data analysis and in the adopted spectroscopic diagnostics.

astro-ph.SR↗

arXiv2018

The Stagger-grid: A grid of 3D stellar atmosphere models V. Synthetic stellar spectra and broad-band photometry

Context. The surface structures and dynamics of cool stars are characterized by the presence of convective motions and turbulent flows which shape the emergent spectrum. Aims. We used realistic three-dimensional radiative hydrodynamical simulations from the Stagger-grid to calculate synthetic spectra with the radiative transfer code Optim3D for stars with different stellar parameters to predict photometric colors and convective velocity shifts. Methods. We calculated spectra from 1000 to 200 000 A with a constant resolving power of 20 000 and from 8470 and 8710 A (Gaia Radial Velocity Spectrometer - RVS - spectral range), with a constant resolving power of 300 000. Results. We used synthetic spectra to compute theoretical colors in the Johnson-Cousins UBV(RI), SDSS, 2MASS, Gaia, SkyMapper, Stromgren systems, and HST-WFC3. We showed that 1D versus 3D differences are limited to a small percent except for the narrow filters that span the optical and UV region of the spectrum. In addition, we derived the effect of the convective velocity fields on selected Fe I lines. We found the overall convective shift for 3D simulations with respect to the reference 1D hydrostatic models, revealing line shifts of between -0.235 and +0.361 km/s. We showed a net correlation of the convective shifts with the effective temperature: lower effective temperatures denote redshifts and higher effective temperatures denote blueshifts. We conclude that the extraction of accurate radial velocities from RVS spectra need an appropriate wavelength correction from convection shifts. Conclusions. The use of realistic 3D hydrodynamical stellar atmosphere simulations has a small but significant impact on the predicted photometry compared with classical 1D hydrostatic models for late-type stars. We make all the spectra publicly available for the community through the POLLUX database.

astro-ph.SR↗

arXiv2017

Equation of state SAHA-S meets stellar evolution code CESAM2k

We present an example of an interpolation code of the SAHA-S equation of state that has been adapted for use in the stellar evolution code CESAM2k. The aim is to provide the necessary data and numerical procedures for its implementation in a stellar code. A technical problem is the discrepancy between the sets of thermodynamic quantities provided by the SAHA-S equation of state and those necessary in the CESAM2k computations. Moreover, the independent variables in a practical equation of state (like SAHA-S) are temperature and density, whereas for modelling calculations the variables temperature and pressure are preferable. Specifically for the CESAM2k code, some additional quantities and their derivatives must be provided. To provide the bridge between the equation of state and stellar modelling, we prepare auxiliary tables of the quantities that are demanded in CESAM2k. Then we use cubic spline interpolation to provide both smoothness and a good approximation of the necessary derivatives. Using the B-form of spline representation provides us with an efficient algorithm for three-dimensional interpolation. The table of B-spline coefficients provided can be directly used during stellar model calculations together with the module of cubic spline interpolation. This implementation of the SAHA-S equation of state in the CESAM2k stellar structure and evolution code has been tested on a solar model evolved to the present. A comparison with other equations of state is briefly discussed. The choice of a regular net of mesh points for specific primary quantities in the SAHA-S equation of state, together with accurate and consistently smooth tabulated values, provides an effective algorithm of interpolation in modelling calculations. The proposed module of interpolation procedures can be easily adopted in other evolution codes.

astro-ph.SR↗

arXiv2016

Evolution of lithium abundance in the Sun and solar twins

Evolution of the 7Li abundance in the convection zone of the Sun during different stages of its life time is considered to explain its low photospheric value in comparison with that of the solar system meteorites. Lithium is intensively and transiently burned in the early stages of evolution (pre-main sequence, pMS) when the radiative core arises, and then the Li abundance only slowly decreases during the main sequence (MS). We study the rates of lithium burning during these two stages. In a model of the Sun, computed ignoring pMS and without extra-convective mixing (overshooting) at the base of the convection zone, the lithium abundance does not decrease significantly during the MS life time of 4.6 Gyr. Analysis of helioseismic inversions together with post-model computations of chemical composition indicates the presence of the overshooting region and restricts its thickness. It is estimated to be approximately half of the local pressure scale height 0.5Hp) which corresponds to 3.8 % of the solar radius. Introducing this extra region does not noticeably deplete lithium during the MS stage. In contrast, at the pMS stage, an overshooting region with a value of approximately 0.18Hp is enough to produce the observed lithium depletion. If we conclude that the dominant lithium burning takes place during the pMS stage, the dispersion of the lithium abundance in solar twins is explained by different physical conditions, primarily during the early stage of evolution before the MS.

astro-ph.SR↗

arXiv2015

On the neutron-capture elements across the Galactic thin disk using Cepheids

We present new accurate abundances for five neutron-capture (Y, La, Ce, Nd, Eu) elements in 73 classical Cepheids located across the Galactic thin disk. Individual abundances are based on high spectral resolution (R ~ 38,000) and high signal-to-noise ratio (S/N ~ 50-300) spectra collected with UVES at ESO VLT for the DIONYSOS project. Taking account for similar Cepheid abundances provided either by our group (111 stars) or available in the literature, we end up with a sample of 435 Cepheids covering a broad range in iron abundances (-1.6 < [Fe/H] < 0.6). We found, using homogeneous individual distances and abundance scales, well defined gradients for the above elements. However, the slope of the light s-process element (Y) is at least a factor of two steeper than the slopes of heavy s- (La, Ce, Nd) and r- (Eu) process elements. The s to r abundance ratio ([La/Eu]) of Cepheids shows a well defined anticorrelation with of both Eu and Fe. On the other hand, Galactic field stars attain an almost constant value and only when they approach solar iron abundance display a mild enhancement in La. The [Y/Eu] ratio shows a mild evidence of a correlation with Eu and, in particular, with iron abundance for field Galactic stars. We also investigated the s-process index - [hs/ls] - and we found a well defined anticorrelation, as expected, between [La/Y] and iron abundance. Moreover, we found a strong correlation between [La/Y] and [La/Fe] and, in particular, a clear separation between Galactic and Sagittarius red giants. Finally, the comparison between predictions for low-mass asymptotic giant branch stars and the observed [La/Y] ratio indicate a very good agreement over the entire metallicity range covered by Cepheids. However, the observed spread, at fixed iron content, is larger than predicted by current models.

astro-ph.SR↗

arXiv2014

On the fine structure of the Cepheid metallicity gradient in the Galactic thin disk

We present homogeneous and accurate iron abundances for 42 Galactic Cepheids based on high-spectral resolution (R~38,000) high signal-to-noise ratio (SNR>100) optical spectra collected with UVES at VLT (128 spectra). The above abundances were complemented with high-quality iron abundances provided either by our group (86) or available in the literature. We paid attention in deriving a common metallicity scale and ended up with a sample of 450 Cepheids. We also estimated for the entire sample accurate individual distances by using homogeneous near-infrared photometry and the reddening free Period-Wesenheit relations. The new metallicity gradient is linear over a broad range of Galactocentric distances (Rg~5-19 kpc) and agrees quite well with similar estimates available in the literature (-0.060+/-0.002 dex/kpc). We also uncover evidence which suggests that the residuals of the metallicity gradient are tightly correlated with candidate Cepheid Groups (CGs). The candidate CGs have been identified as spatial overdensities of Cepheids located across the thin disk. They account for a significant fraction of the residual fluctuations, and in turn for the large intrinsic dispersion of the metallicity gradient. We performed a detailed comparison with metallicity gradients based on different tracers: OB stars and open clusters. We found very similar metallicity gradients for ages younger than 3 Gyrs, while for older ages we found a shallower slope and an increase in the intrinsic spread. The above findings rely on homogeneous age, metallicity and distance scales. Finally we found, by using a large sample of Galactic and Magellanic Cepheids for which are available accurate iron abundances, that the dependence of the luminosity amplitude on metallicity is vanishing.

astro-ph.GA↗

arXiv2012

Comparative Modelling of the Spectra of Cool Giants

Our ability to extract information from the spectra of stars depends on reliable models of stellar atmospheres and appropriate techniques for spectral synthesis. Various model codes and strategies for the analysis of stellar spectra are available today. We aim to compare the results of deriving stellar parameters using different atmosphere models and different analysis strategies. The focus is set on high-resolution spectroscopy of cool giant stars. Spectra representing four cool giant stars were made available to various groups and individuals working in the area of spectral synthesis, asking them to derive stellar parameters from the data provided. The results were discussed at a workshop in Vienna in 2010. Most of the major codes currently used in the astronomical community for analyses of stellar spectra were included in this experiment. We present the results from the different groups, as well as an additional experiment comparing the synthetic spectra produced by various codes for a given set of stellar parameters. Similarities and differences of the results are discussed. Several valid approaches to analyze a given spectrum of a star result in quite a wide range of solutions. The main causes for the differences in parameters derived by different groups seem to lie in the physical input data and in the details of the analysis method. This clearly shows how far from a definitive abundance analysis we still are.

astro-ph.SR↗

arXiv2011

3D hydrodynamical model atmospheres: a tool to correct radial velocities and parallaxes for Gaia

Convection plays an essential role in the emerging intensity for many stars that will be observed by Gaia. Convective-related surface structures affect the shape, shift, and asymmetry of absorption lines, the phocentric and photometric variability causing bias in Gaia measurements. Regarding the importance of Gaia mission and its goals, it is mandatory to have the best models of the observed stars. 3D time-dependent hydrodynamical simulations of surface convection are crucial to model the photosphere of late type stars in a very realistic way. These simulations are an important tool to correct the radial velocities and better estimates the parallaxes and photometric variability.

astro-ph.SR↗