Searcharxiv⌕ Search

arXiv subjects

Fabian Kaap

Publications and source records attributed to Fabian Kaap.

4 recordsLinked to original sources

Quantitative measurement of microwave power at millikelvin temperatures: Comparison between dispersively and directly coupled superconducting qubits

The Rabi frequency of a two-level system is directly proportional to the electric field amplitude being incident on this system. Taking advantage of this relationship, it is possible to use two-level systems as quantitative sensors of electric fields. Here, we apply this concept to superconducting qubits and use them for quantitative measurement of microwave power at millikelvin temperatures. Our superconducting circuit design includes three transmon qubits directly coupled to the central microwave feedline and three transmon qubits coupled dispersively via readout resonators to the feedline. We compare both coupling schemes to assess their reliability for microwave power sensing. Further, we describe the modeling behind each power-sensing method, including an uncertainty estimation based upon repeated measurements. By combining dispersively coupled and directly coupled qubits on the same device, we are able to explore different power ranges: from $-155\;$dBm to $-130\;$dBm for the directly coupled qubits and from $-95\;$dBm to $-55\;$dBm for the dispersively coupled qubits. When determining the microwave-line attenuation for a frequency of $6.0\;$GHz from room temperature to the millikelvin stage of the cryostat, we obtain best estimates and uncertainties for the directly coupled transmons of $(74.7\pm 0.2) \;$dB and for the dispersively coupled transmons of $(75.4\pm 6.8) \;$dB. The larger uncertainty of the dispersively coupled qubit measurements indicates that these qubits are less reliable for power sensing than the directly coupled qubits, most likely, due to the additional coupling resonator, whose transfer function is difficult to estimate accurately. Our results constitute the first step towards validation of qubit power sensing in dilution fridges, leading towards traceability for cryogenic microwave measurements.

quant-ph↗

Demonstration of dual Shapiro steps in small Josephson junctions

Bloch oscillations in small Josephson junctions were predicted theoretically as the quantum dual to Josephson oscillations. A significant consequence of this prediction is the emergence of quantized current steps, so-called dual Shapiro steps, when synchronizing Bloch oscillations to an external microwave signal. These steps potentially enable a fundamental standard of current $I$, defined via the frequency $f$ of the external signal and the elementary charge $e$, $I=\pm n \times 2ef$, where $n$ is a natural number. Here, we realize this fundamental relation by synchronizing the Bloch oscillations in small Al/AlO$_\mathrm{x}$/Al Josephson junctions to sinusoidal drives with frequencies varying from $1$ to $6\:\mathrm{GHz}$ and observe dual Shapiro steps up to $I\approx 3 \: \mathrm{nA}$. Inspired by today's voltage standards and to further confirm the duality relation, we investigate a pulsed drive regime, which is dual to the single flux quantum mode of Josephson oscillations, and observe a similar asymmetric pattern of dual Shapiro steps. This work confirms quantum duality effects in Josephson junctions and paves the way towards a range of applications in quantum metrology based on well-established fabrication techniques and straightforward circuit design.

cond-mat.mes-hall↗

On chip synchronization of Bloch oscillations in a strongly coupled pair of small Josephson junctions

Bloch oscillations are a fundamental phenomenon linking the adiabatic transport of Cooper pairs to time. Here, we investigate synchronization of the Bloch oscillations in a strongly coupled system of sub-100 nm Al/AlOx/Al Josephson junctions in high-ohmic environment composed of highly inductive meanders of granulated aluminum and high-ohmic titanium microstrips. We observe a pronounced current mirror eff ect in the coupled junctions and demonstrate current plateaus, akin to the fi rst dual Shapiro step in microwave experiments. These fi ndings suggest that our circuit design holds promise for realizing protected Bloch oscillations and precise Shapiro steps of interest for current metrology.

cond-mat.mes-hall↗

Vulnerability to Parameter Spread in Josephson Traveling-Wave Parametric Amplifiers

We analyze the effect of circuit parameter variation on the performance of Josephson traveling-wave parametric amplifiers (JTWPAs). Specifically, the JTWPA concept we investigate is using flux-biased nonhysteretic rf-SQUIDs in a transmission line configuration, which harnesses the three-wave mixing (3WM) regime. Dispersion engineering enables phasematching to achieve power gain of $\sim$20 dB, while suppressing the generation of unwanted mixing processes. Two dispersion engineering concepts using a 3WM-JTWPA circuit model, i.e., resonant phase-matching (RPM) and periodic capacitance modulation (PCM), are discussed, with results potentially also applicable to four-wave-mixing (4WM) JTWPAs. We propose suitable circuit parameter sets and evaluate amplifier performance with and without circuit parameter variance using transient circuit simulations. This approach inherently takes into account microwave reflections, unwanted mixing products, imperfect phasematching, pump depletion, etc. In the case of RPM the resonance frequency spread is critical, while PCM is much less sensitive to parameter spread. We discuss degrees of freedom to make the JTWPA circuits more tolerant to parameter spread. Finally, our analysis shows that the flux-bias point where rf-SQUIDs exhibit Kerr-free nonlinearity is close to the sweet spot regarding critical current spread.

cond-mat.supr-con↗