arXiv subjects

Fabian Key

Publications and source records attributed to Fabian Key.

13 recordsLinked to original sources

arXiv2026

Adaptive Encoding Strategy for Quantum Annealing in Mixed-Variable Engineering Optimization

Mixed discrete-continuous optimization is central to engineering design, where discrete choices interact with continuous fields. These problems are difficult due to high-dimensional, complex search spaces. To tackle them, Quantum Annealing (QA) is promising, yet its native binary nature supports only discrete variables, making accurate and efficient encodings of continuous quantities a central challenge. Existing approaches either split the coupled problem, mapping discrete decisions to QA while solving continuous fields classically, or use fixed-bit-depth encodings. The former compromises QA's global search advantages; the latter can underrepresent dynamic range or inflate the number of binary variables. We show that simply increasing bit depth can even degrade performance on current QA hardware, underscoring the need for alternative encodings. In response, we introduce an adaptive encoding strategy for continuous variables in QA that enables efficient treatment of coupled mixed-variable problems. We propose an update strategy for the representable ranges of the continuous variables and demonstrate its utility by integrating it into the minimum complementary energy formulation for structural design optimization, which provides a single, coupled constrained problem. We apply a quadratic penalty method where we update the representation of the continuous variables while targeting the full original objective, preserving QA's global search capability. On a published benchmark, the size optimization of a composite rod, our adaptive encoding improves solution quality under a fixed binary variable budget, demonstrating a superior precision-resource trade-off. Since the framework generalizes beyond structural design, it offers practical guidance for encoding continuous variables for QA and indicates that adaptive representations can enhance precision on current hardware.

cs.CE↗

arXiv2025

A Spline-Based Stress Function Approach for the Principle of Minimum Complementary Energy

In computational engineering, ensuring the integrity and safety of structures in fields such as aerospace and civil engineering relies on accurate stress prediction. However, analytical methods are limited to simple test cases, and displacement-based finite element methods (FEMs), while commonly used, require a large number of unknowns to achieve high accuracy; stress-based numerical methods have so far failed to provide a simple and effective alternative. This work aims to develop a novel numerical approach that overcomes these limitations by enabling accurate stress prediction with improved flexibility for complex geometries and boundary conditions and fewer degrees of freedom (DOFs). The proposed method is based on a spline-based stress function formulation for the principle of minimum complementary energy, which we apply to plane, linear elastostatics. The method is first validated against analytical solutions and then tested on two test cases challenging for current state-of-the-art numerical schemes, a bi-layer cantilever with anisotropic material behavior, and a cantilever with a non-prismatic, parabolic-shaped beam geometry. Results demonstrate that our approach, unlike analytical methods, can be easily applied to general geometries and boundary conditions, and achieves stress accuracy comparable to that reported in the literature for displacement-based FEMs, while requiring significantly fewer DOFs. This novel spline-based stress function approach thus provides an efficient and flexible tool for accurate stress prediction, with promising applications in structural analysis and numerical design.

cs.CE↗

arXiv2024

An Ising Machine Formulation for Design Updates in Topology Optimization of Flow Channels

Topology optimization is an essential tool in computational engineering, for example, to improve the design and efficiency of flow channels. At the same time, Ising machines, including digital or quantum annealers, have been used as efficient solvers for combinatorial optimization problems. Beyond combinatorial optimization, recent works have demonstrated applicability to other engineering tasks by tailoring corresponding problem formulations. In this study, we present a novel Ising machine formulation for computing design updates during topology optimization with the goal of minimizing dissipation energy in flow channels. We explore the potential of this approach to improve the efficiency and performance of the optimization process. To this end, we conduct experiments to study the impact of various factors within the novel formulation. Additionally, we compare it to a classical method using the number of optimization steps and the final values of the objective function as indicators of the time intensity of the optimization and the performance of the resulting designs, respectively. Our findings show that the proposed update strategy can accelerate the topology optimization process while producing comparable designs. However, it tends to be less exploratory, which may lead to lower performance of the designs. These results highlight the potential of incorporating Ising formulations for optimization tasks but also show their limitations when used to compute design updates in an iterative optimization process. In conclusion, this work provides an efficient alternative for design updates in topology optimization and enhances the understanding of integrating Ising machine formulations in engineering optimization.

cs.CE↗

arXiv2024

Eulerian Formulation of the Tensor-Based Morphology Equations for Strain-Based Blood Damage Modeling

The development of blood-handling medical devices, such as ventricular assist devices, requires the analysis of their biocompatibility. Among other aspects, this includes hemolysis, i.e., red blood cell damage. For this purpose, computational fluid dynamics (CFD) methods are employed to predict blood flow in prototypes. The most basic hemolysis models directly estimate red blood cell damage from fluid stress in the resulting flow field. More advanced models explicitly resolve cell deformation. On the downside, these models are typically written in a Lagrangian formulation, i.e., they require pathline tracking. We present a new Eulerian description of cell deformation, enabling the evaluation of the solution across the whole domain. The resulting hemolysis model can be applied to any converged CFD simulation due to one-way coupling with the fluid velocity field. We discuss the efficient numerical treatment of the model equations in a stabilized finite element context. We verify the model by comparison to the original Lagrangian formulation in selected benchmark flows. Two more complex test cases demonstrate the method's capabilities in real-world applications. The results highlight the advantages over previous hemolysis models. In conclusion, the model holds great potential for the design process of future generations of medical devices.

physics.flu-dyn↗

arXiv2023

A Formulation of Structural Design Optimization Problems for Quantum Annealing

We present a novel formulation of structural design optimization problems specifically tailored to be solved by quantum annealing (QA). Structural design optimization aims to find the best, i.e., material-efficient yet high-performance, configuration of a structure. To this end, computational optimization strategies can be employed, where a recently evolving strategy based on quantum mechanical effects is QA. This approach requires the optimization problem to be present, e.g., as a quadratic unconstrained binary optimization (QUBO) model. Thus, we develop a novel formulation of the optimization problem. The latter typically involves an analysis model for the component. Here, we use energy minimization principles that govern the behavior of structures under applied loads. This allows us to state the optimization problem as one overall minimization problem. Next, we map this to a QUBO problem that can be immediately solved by QA. We validate the proposed approach using a size optimization problem of a compound rod under self-weight loading. To this end, we develop strategies to account for the limitations of currently available hardware and find that the presented formulation is suitable for solving structural design optimization problems through QA and, for small-scale problems, already works on today's hardware.

cs.CE↗

arXiv2023

Exploring the Influence of Parametrized Pulsatility on Left Ventricular Washout under LVAD Support: A Computational Study Using Reduced-Order Models

Medical therapy for patients with severe heart disease often relies on left ventricular assist devices (LVADs). It is an ongoing topic of research how complications like stagnation and thrombosis can be prevented by using artificial pulsatility. We study a parametric pulse profile and its effect on the left ventricular washout using a computational flow model. Based on finite element simulations, we construct reduced-order models to reduce the computational costs for evaluating the parametrized problem. We observe that a pulsatile flow rate improves the washout compared to a constant flow rate. In particular, we find that short, intense pulses wash out the left ventricle best, whereas the time between subsequent pulses plays no significant role.

physics.flu-dyn↗

arXiv2023

Model Order Reduction for Deforming Domain Problems in a Time-Continuous Space-Time Setting

In the context of simulation-based methods, multiple challenges arise, two of which are considered in this work. As a first challenge, problems including time-dependent phenomena with complex domain deformations, potentially even with changes in the domain topology, need to be tackled appropriately. The second challenge arises when computational resources and the time for evaluating the model become critical in so-called many query scenarios for parametric problems. For example, these problems occur in optimization, uncertainty quantification (UQ), or automatic control and using highly resolved full-order models (FOMs) may become impractical. To address both types of complexity, we present a novel projection-based model order reduction (MOR) approach for deforming domain problems that takes advantage of the time-continuous space-time formulation. We apply it to two examples that are relevant for engineering or biomedical applications and conduct an error and performance analysis. In both cases, we are able to drastically reduce the computational expense for a model evaluation and, at the same time, to maintain an adequate accuracy level. All in all, this work indicates the effectiveness of the presented MOR approach for deforming domain problems taking advantage of a time-continuous space-time setting.

math.NA↗

arXiv2022

A scale-coupled numerical method for transient close-contact melting

We introduce a numerical workflow to model and simulate transient close-contact melting processes based on the space-time finite element method. That is, we aim at computing the velocity at which a forced heat source melts through a phase-change material. Existing approaches found in the literature consider a thermo-mechanical equilibrium in the contact melt film, which results in a constant melting velocity of the heat source. This classical approach, however, cannot account for transient effects in which the melting velocity adjusts itself to equilibrium conditions. With our contribution, we derive a model for the transient melting process of a planar heat source. We iteratively cycle between solving for the heat equation in the solid material and updating the melting velocity. The latter is computed based on the heat flux in the vicinity of the heat source. The motion of the heated body is simulated via the moving mesh strategy referred to as the Virtual Region Shear-Slip Mesh Update Method, which avoids remeshing and is particularly efficient in representing unidirectional movement. We show numerical examples to validate our methodology and present two application scenarios, a 2D planar thermal melting probe and a 2D hot-wire cutting machine.

math.NA↗

arXiv2021

A novel approach to fluid-structure interaction simulations involving large translation and contact

In this work, we present a novel method for the mesh update in flow problems with moving boundaries, the phantom domain deformation mesh update method (PD-DMUM). The PD-DMUM is designed to avoid remeshing; even in the event of large, unidirectional displacements of boundaries. The method combines the concept of two mesh adaptation approaches: (1) The virtual ring shear-slip mesh updatemethod (VR-SSMUM); and (2) the elastic mesh update method (EMUM). As in the VR-SSMUM, the PD-DMUMextends the fluid domain by a phantom domain; the PD-DMUM can thus locally adapt the element density. Combined with the EMUM, the PD-DMUMallows the consideration of arbitrary boundary movements. In this work, we apply the PD-DMUM in two test cases. Within the first test case, we validate the PD-DMUM in a 2D Poiseuille flow on a moving background mesh. Subsequently the fluid-structure interaction (FSI) problem in the second test case serves as a proof of concept. More, we stress the advantages of the novel method with regard to conventional mesh update approaches.

math.NA↗

arXiv2020

Four-Dimensional Elastically Deformed Simplex Space-Time Meshes for Domains with Time Variant Topology

Thinking of the flow through biological or technical valves, there is a variety of applications in which the topology of a fluid domain changes over time. This topology change is characteristic for the physical behaviour, but poses a particular challenge in computer simulations. A way to overcome this challenge is to consider the space-time extent of the application as a contiguous computational domain. In this work, we obtain a boundary conforming discretization of the space-time domain with four-dimensional simplex elements (pentatopes). To facilitate the construction of pentatope meshes for complex geometries, the widely used elastic mesh update method is extended to four-dimensional meshes. In the resulting workflow, the topology change is elegantly included in the pentatope mesh and does not require any additional treatment during the simulation. The potential of simplex space-time meshes for domains with time variant topology is demonstrated in a valve simulation and a flow simulation inspired by a clamped artery.

math.NA↗

arXiv2020

Standardized Non-Intrusive Reduced Order Modeling Using Different Regression Models With Application to Complex Flow Problems

In recent years, numerical methods in industrial applications have evolved from a pure predictive tool towards a means for optimization and control. Since standard numerical analysis methods have become prohibitively costly in such multi-query settings, a variety of reduced order modeling (ROM) approaches have been advanced towards complex applications. In this context, the driving application for this work is twin-screw extruders (TSEs): manufacturing devices with an important economic role in plastics processing. Modeling the flow through a TSE requires non-linear material models and coupling with the heat equation alongside intricate mesh deformations, which is a comparatively complex scenario. We investigate how a non-intrusive, data-driven ROM can be constructed for this application. We focus on the well-established proper orthogonal decomposition (POD) with regression albeit we introduce two adaptations: standardizing both the data and the error measures as well as -- inspired by our space-time simulations -- treating time as a discrete coordinate rather than a continuous parameter. We show that these steps make the POD-regression framework more interpretable, computationally efficient, and problem-independent. We proceed to compare the performance of three different regression models: Radial basis function (RBF) regression, Gaussian process regression (GPR), and artificial neural networks (ANNs). We find that GPR offers several advantages over an ANN, constituting a viable and computationally inexpensive non-intrusive ROM. Additionally, the framework is open-sourced to serve as a starting point for other practitioners and facilitate the use of ROM in general engineering workflows.

physics.comp-ph↗

arXiv2020

Combining Boundary-Conforming Finite Element Meshes on Moving Domains Using a Sliding Mesh Approach

For most finite element simulations, boundary-conforming meshes have significant advantages in terms of accuracy or efficiency. This is particularly true for complex domains. However, with increased complexity of the domain, generating a boundary-conforming mesh becomes more difficult and time consuming. One might therefore decide to resort to an approach where individual boundary-conforming meshes are pieced together in a modular fashion to form a larger domain. This paper presents a stabilized finite element formulation for fluid and temperature equations on sliding meshes. It couples the solution fields of multiple subdomains whose boundaries slide along each other on common interfaces. Thus, the method allows to use highly tuned boundary-conforming meshes for each subdomain that are only coupled at the overlapping boundary interfaces. In contrast to standard overlapping or fictitious domain methods the coupling is broken down to few interfaces with reduced geometric dimension. The formulation consists of the following key ingredients: the coupling of the solution fields on the overlapping surfaces is imposed weakly using a stabilized version of Nitsche's method. It ensures mass and energy conservation at the common interfaces. Additionally, we allow to impose weak Dirichlet boundary conditions at the non-overlapping parts of the interfaces. We present a detailed numerical study for the resulting stabilized formulation. It shows optimal convergence behavior for both Newtonian and generalized Newtonian material models. Simulations of flow of plastic melt inside single-screw as well as twin-screw extruders demonstrate the applicability of the method to complex and relevant industrial applications.

math.NA↗

arXiv2018

The Virtual Ring Shear-Slip Mesh Update Method

A novel method - the Virtual Ring Shear-Slip Mesh Update Method (VR-SSMUM) - for the efficient and accurate modeling of moving boundary or interface problems in the context of the numerical analysis of fluid flow is presented. We focus on cases with periodic straight-line translation including object entry and exit. The periodic character of the motion is reflected in the method via a mapping of the physical domain onto a closed virtual ring. Therefore, we use an extended mesh, where unneeded portions are deactivated to control the computational overhead. We provide a validation case as well as examples for the applicability of the method to 2D and 3D models of packaging machines.

math.NA↗