Searcharxiv⌕ Search

arXiv subjects

Fabien Cavalier

Publications and source records attributed to Fabien Cavalier.

10 recordsLinked to original sources
arXiv2022

Synergies and Prospects for Early Resolution of the Neutrino Mass Ordering

The measurement of neutrino Mass Ordering (MO) is a fundamental element for the understanding of leptonic flavour sector of the Standard Model of Particle Physics. Its determination relies on the precise measurement of $Δm^2_{31}$ and $Δm^2_{32}$ using either neutrino vacuum oscillations, such as the ones studied by medium baseline reactor experiments, or matter effect modified oscillations such as those manifesting in long-baseline neutrino beams (LB$ν$B) or atmospheric neutrino experiments. Despite existing MO indication today, a fully resolved MO measurement ($\geq$5$σ$) is most likely to await for the next generation of neutrino experiments: JUNO, whose stand-alone sensitivity is $\sim$3$σ$, or LB$ν$B experiments (DUNE and Hyper-Kamiokande). Upcoming atmospheric neutrino experiments are also expected to provide precious information. In this work, we study the possible context for the earliest full MO resolution. A firm resolution is possible even before 2028, exploiting mainly vacuum oscillation, upon the combination of JUNO and the current generation of LB$ν$B experiments (NOvA and T2K). This opportunity is possible thanks to a powerful synergy boosting the overall sensitivity where the sub-percent precision of $Δm^2_{32}$ by LB$ν$B experiments is found to be the leading order term for the MO earliest discovery. We also found that the comparison between matter and vacuum driven oscillation results enables unique discovery potential for physics beyond the Standard Model.

hep-ph↗
arXiv2015

Improved constraint on the primordial gravitational-wave density using recent cosmological data and its impact on cosmic string models

The production of a primordial stochastic gravitational-wave background by processes occuring in the early Universe is expected in a broad range of models. Observing this background would open a unique window onto the Universe's evolutionary history. Probes like the Cosmic Microwave Background (CMB) or the Baryon Acoustic Oscillations (BAO) can be used to set upper limits on the stochastic gravitational-wave background energy density $Ω_{GW}$ for frequencies above $10^{-15}$ Hz. We perform a profile likelihood analysis of the Planck CMB temperature anisotropies and gravitational lensing data combined with WMAP low-$\ell$ polarization, BAO, South Pole Telescope and Atacama Cosmology Telescope data. We find that $Ω_{GW}h_{0}^{2} < 3.8 \times 10^{-6}$ at 95\% confidence level for adiabatic initial conditions which improves over the previous limit by a factor 2.3. Assuming that the primordial gravitational waves have been produced by a network of cosmic strings, we have derived exclusion limits in the cosmic string parameter space. If the size of the loops is determined by gravitational back-reaction, string tension values greater than $\sim 4 \times 10^{-9}$ are excluded for a reconnection probability of $10^{-3}$.

astro-ph.CO↗
arXiv2009

On the background estimation by time slides in a network of gravitational wave detectors

Time shifting the outputs of Gravitational Wave detectors operating in coincidence is a convenient way to estimate the background in a search for short duration signals. However this procedure is limited as increasing indefinitely the number of time shifts does not provide better estimates. We show that the false alarm rate estimation error saturates with the number of time shifts. In particular, for detectors with very different trigger rates this error saturates at a large value. Explicit computations are done for 2 detectors, and for 3 detectors where the detection statistic relies on the logical ``OR'' of the coincidences of the 3 couples in the network.

gr-qc↗
arXiv2003

Detection of a close supernova gravitational wave burst in a network of interferometers, neutrino and optical detectors

Trying to detect the gravitational wave (GW) signal emitted by a type II supernova is a main challenge for the GW community. Indeed, the corresponding waveform is not accurately modeled as the supernova physics is very complex; in addition, all the existing numerical simulations agree on the weakness of the GW emission, thus restraining the number of sources potentially detectable. Consequently, triggering the GW signal with a confidence level high enough to conclude directly to a detection is very difficult, even with the use of a network of interferometric detectors. On the other hand, one can hope to take benefit from the neutrino and optical emissions associated to the supernova explosion, in order to discover and study GW radiation in an event already detected independently. This article aims at presenting some realistic scenarios for the search of the supernova GW bursts, based on the present knowledge of the emitted signals and on the results of network data analysis simulations. Both the direct search and the confirmation of the supernova event are considered. In addition, some physical studies following the discovery of a supernova GW emission are also mentioned: from the absolute neutrino mass to the supernova physics or the black hole signature, the potential spectrum of discoveries is wide.

gr-qc↗
arXiv2003

Coincidence and coherent data analysis methods for gravitational wave bursts in a network of interferometric detectors

Network data analysis methods are the only way to properly separate real gravitational wave (GW) transient events from detector noise. They can be divided into two generic classes: the coincidence method and the coherent analysis. The former uses lists of selected events provided by each interferometer belonging to the network and tries to correlate them in time to identify a physical signal. Instead of this binary treatment of detector outputs (signal present or absent), the latter method involves first the merging of the interferometer data and looks for a common pattern, consistent with an assumed GW waveform and a given source location in the sky. The thresholds are only applied later, to validate or not the hypothesis made. As coherent algorithms use a more complete information than coincidence methods, they are expected to provide better detection performances, but at a higher computational cost. An efficient filter must yield a good compromise between a low false alarm rate (hence triggering on data at a manageable rate) and a high detection efficiency. Therefore, the comparison of the two approaches is achieved using so-called Receiving Operating Characteristics (ROC), giving the relationship between the false alarm rate and the detection efficiency for a given method. This paper investigates this question via Monte-Carlo simulations, using the network model developed in a previous article.

gr-qc↗
arXiv2003

Comparison of filters for detecting gravitational wave bursts in interferometric detectors

Filters developed in order to detect short bursts of gravitational waves in interferometric detector outputs are compared according to three main points. Conventional Receiver Operating Characteristics (ROC) are first built for all the considered filters and for three typical burst signals. Optimized ROC are shown for a simple pulse signal in order to estimate the best detection efficiency of the filters in the ideal case, while realistic ones obtained with filters working with several ``templates'' show how detection efficiencies can be degraded in a practical implementation. Secondly, estimations of biases and statistical errors on the reconstruction of the time of arrival of pulse-like signals are then given for each filter. Such results are crucial for future coincidence studies between Gravitational Wave detectors but also with neutrino or optical detectors. As most of the filters require a pre-whitening of the detector noise, the sensitivity to a non perfect noise whitening procedure is finally analysed. For this purpose lines of various frequencies and amplitudes are added to a Gaussian white noise and the outputs of the filters are studied in order to monitor the excess of false alarms induced by the lines. The comparison of the performances of the different filters finally show that they are complementary rather than competitive.

gr-qc↗
arXiv2003

An elliptical tiling method to generate a 2-dimensional set of templates for gravitational wave search

Searching for a signal depending on unknown parameters in a noisy background with matched filtering techniques always requires an analysis of the data with several templates in parallel in order to ensure a proper match between the filter and the real waveform. The key feature of such an implementation is the design of the filter bank which must be small to limit the computational cost while keeping the detection efficiency as high as possible. This paper presents a geometrical method which allows one to cover the corresponding physical parameter space by a set of ellipses, each of them being associated to a given template. After the description of the main characteristics of the algorithm, the method is applied in the field of gravitational wave (GW) data analysis, for the search of damped sine signals. Such waveforms are expected to be produced during the de-excitation phase of black holes -- the so-called 'ringdown' signals -- and are also encountered in some numerically computed supernova signals.

gr-qc↗
arXiv2001

Detection in coincidence of gravitational wave bursts with a network of interferometric detectors (I): Geometric acceptance and timing

Detecting gravitational wave bursts (characterised by short durations and poorly modelled waveforms) requires to have coincidences between several interferometric detectors in order to reject non-stationary noise events. As the wave amplitude seen in a detector depends on its location with respect to the source direction and as the signal to noise ratio of these bursts are expected to be low, coincidences between antennas may not be so likely. This paper investigates this question from a statistical point of view by using a simple model of a network of detectors; it also estimates the timing precision of a detection in an interferometer which is an important issue for the reconstruction of the source location, based on time delays.

gr-qc↗
arXiv2000

An efficient filter for detecting gravitational wave bursts in interferometric detectors

Typical sources of gravitational wave bursts are supernovae, for which no accurate models exist. This calls for search methods with high efficiency and robustness to be used in the data analysis of foreseen interferometric detectors. A set of such filters is designed to detect gravitational wave burst signals. We first present filters based on the linear fit of whitened data to short straight lines in a given time window and combine them in a non linear filter named ALF. We study the performances and efficiencies of these filters, with the help of a catalogue of simulated supernova signals. The ALF filter is the most performant and most efficient of all filters. Its performance reaches about 80% of the Optimal Filter performance designed for the same signals. Such a filter could be implemented as an online trigger (dedicated to detect bursts of unknown waveform) in interferometric detectors of gravitational waves.

gr-qc↗