arXiv subjects

Fabien Defrance

Publications and source records attributed to Fabien Defrance.

13 recordsLinked to original sources

arXiv2026

An Open Source RFSoC-based Readout Electronics System for Arrays of Kinetic Inductance Detectors and Superconducting Resonators

We present a novel readout electronics system for large arrays of superconducting electromagnetic resonators, such as kinetic inductance detectors (KIDs), based on a Radio Frequency System on Chip (RFSoC) architecture. Each channel in the readout system is designed for frequency division multiplexing of up to 1024 high quality factor resonances placed on a single microwave transmission line at unique frequencies within a 512 MHz bandwidth. We describe the design of the digital and analog signal processing chains for the implementation of a two-channel 2048-resonator system on the Xilinx ZCU111 RFSoC evaluation board in combination with a custom intermediate frequency (IF) system to convert the RFSoC band to higher frequencies up to 4 GHz. We also detail an associated software interface that provides a range of tools commonly utilized for characterizing KID resonators and for operating them as part of a photometric millimeter-wave imager. We additionally provide noise characterizations of the individual readout components, along with the complete readout system in isolation and in operation to readout KID resonators.

physics.ins-det↗

arXiv2026

Superconducting Parallel-Plate Resonators for the Detection of Single Electron Spins

We introduce a multilayer superconducting microwave resonator with sub-Ohm impedance optimized for high coupling strength to single electron spins. The design minimizes the magnetic far-field and therefore achieves a Purcell factor $F_P > 10^{15}$. We show several ways to fabricate this type of resonator and present resonators with an intrinsic $Q$-factor exceeding $2 \cdot 10^4$ at the single-photon level. We further characterize these resonators in magnetic fields up to $500 \, \text{mT}$. Finally, we evaluate the impact of the achievable Purcell factor on single-spin detection through photon counting and dispersive readout.

quant-ph↗

arXiv2025

Low-Frequency Noise Performance of Microstrip-Coupled Lumped-Element Aluminum KIDs using Hydrogenated Amorphous Silicon Parallel-Plate Capacitors for NEW-MUSIC

We present measurements of the low-frequency noise of microstrip-coupled, lumped-element aluminum kinetic inductance detectors that use hydrogenated amorphous silicon parallel-plate capacitors (Al/a-Si:H MS-PPC-LEKIDs), which are under development for the Next-generation Extended Wavelength Multiband Submillimeter Inductance Camera (NEW-MUSIC). We show that, under dark conditions, these devices are generation recombination (GR) noise dominated down to 0.1 Hz and, under optical load, they are likely dominated by GR and photon noise down to tenths of a Hz and possibly lower, both in spite of the use of a-Si:H PPCs. Our measurements set limits on the low-frequency two-level-system (TLS) noise of the a-Si:H material that are consistent with higher frequency measurements in the 0.1-10 kHz regime. These results establish that our MS-PPC-LEKID design for NEW-MUSIC will be photon-noise-limited under a range of observing conditions and, more generally, that a-Si:H PPC-KIDs are a viable new detector technology for even low modulation-rate applications such as astronomy.

astro-ph.IM↗

arXiv2025

Improved Modeling of Quasi-Static Thermal and Optical Response of Lumped-Element Aluminum Manganese KIDs

We report on the optical characterization of the AlMn kinetic inductance detectors (KIDs) in development for use in the Next-generation Extended Wavelength-MUltiband Sub/millimeter Inductance Camera (NEW-MUSIC) on the Leighton Chajnantor Telescope (LCT). NEW-MUSIC will cover 80-420 GHz, split into six spectral bands, with polarimetry. This broad spectral coverage will enable study of a range of scientific topics such as the accretion and feedback in galaxies and galaxy cluster evolution via the Sunyaev-Zeldovich effect, the transient synchrotron emission from the explosive deaths of massive stars and other time-domain phenomena, and dusty sources from low to high redshift (with polarization). Al KIDs have already been demonstrated for bands 2-5. AlMn KIDs will be used for the 90~GHz band, as Al's pair-breaking energy is too high. However, AlMn has only barely been explored as a KID material. To this end, we first improved the modeling techniques used for Al KIDs within BCS theory by eliminating the use of analytical approximations for the expressions of the complex conductivity and found these changes reduced fit parameter degeneracy in the analysis of AlMn. Then, we tested the addition of a gap smearing parameter, a standard extension to BCS theory in use for high kinetic inductance materials, and found it did not improve the fits.

astro-ph.IM↗

arXiv2025

A Millimeter-Wave Photometric Camera for Long-Range Imaging Through Optical Obscurants Using Kinetic Inductance Detectors

Passive imaging through optical obscurants is a promising application for mm-wave sensing. We have thus developed the Superconducting Kinetic Inductance Passive Radiometer (SKIPR), a 150 GHz polarization-sensitive photometric camera optimized for terrestrial imaging using a focal plane array with 3,840 kinetic inductance detectors (KIDs). We present a full description of the instrument design, with a particular emphasis on the cryogenic system based on a Gifford-McMahon cryocooler with a two-stage Adiabatic Demagnetization Refrigerator and a dedicated 1.59 m crossed Dragone telescope with an altitude/azimuth mount. We include a detailed lab-based characterization of the KIDs, which results in a determination of their superconducting resonator parameters and optical properties. We also present in situ measurements from the telescope, including point-spread functions and noise characterization. In sum, we find that SKIPR performs as expected, providing diffraction-limited imaging with detector noise performance set by the random arrivals of photons from the ambient background. There is minimal variation in detector characteristics over the full SKIPR focal plane array, and the overall detector yield is 92 per cent.

astro-ph.IM↗

arXiv2024

Low two-level-system noise in hydrogenated amorphous silicon

At sub-Kelvin temperatures, two-level systems (TLS) present in amorphous dielectrics source a permittivity noise, degrading the performance of a wide range of devices using superconductive resonators such as qubits or kinetic inductance detectors. We report here on measurements of TLS noise in hydrogenated amorphous silicon (a-Si:H) films deposited by plasma-enhanced chemical vapor deposition (PECVD) in superconductive lumped-element resonators using parallel-plate capacitors (PPCs). The TLS noise results presented in this article for two recipes of a-Si:H improve on the best achieved in the literature by a factor >5 for a-Si:H and other amorphous dielectrics and are comparable to those observed for resonators deposited on crystalline dielectrics.

physics.ins-det↗

arXiv2024

NEW-MUSIC: The Next-generation Extended-Wavelength Multiband Sub/millimeter Inductance Camera

The Next-generation Extended Wavelength-MUltiband Sub/millimeter Inductance Camera (NEW-MUSIC) on the Leighton Chajnantor Telescope (LCT) will be a first-of-its-kind, six-band, transmillimeter-wave ("trans-mm") polarimeter covering 2.4 octaves of spectral bandwidth to open a new window on the trans-mm time-domain frontier, in particular new frontiers in energy, density, time, and magnetic field. NEW-MUSIC's broad spectral coverage will also enable the use of the Sunyaev-Zeldovich effects to study accretion, feedback, and dust content in the hot gaseous haloes of galaxies and galaxy clusters. Six-band spectral energy distributions, with polarization information, will yield new insights into stellar and planetary nurseries. NEW-MUSIC will employ hierarchical, phased arrays of polarization-sensitive superconducting slot-dipole antennas, coupled to photolithographic bandpass filters, to nearly optimally populate LCT's 14' field-of-view with six spectral bands over 80-420 GHz (1:5.25 spectral dynamic range; 2.4 octaves). Light will be routed to Al or AlMn microstripline-coupled, parallel-plate capacitor, lumped-element kinetic inductance detectors (MS-PPC-LEKIDs), an entirely new KID architecture that substantially enhances design flexibility while providing background-limited performance. Innovative, wide-bandwidth, etched silicon structures will be used to antireflection-treat the back-illuminated focal plane. NEW-MUSIC will cost-effectively reuse much of the MUSIC instrument, initially deploying a quarter-scale focal plane capable of the bulk of NEW-MUSIC science followed later by a full-FoV focal plane needed for NEW-MUSIC wide-area survey science.

astro-ph.IM↗

arXiv2024

Flat silicon gradient index lens with deep reactive-ion-etched 3-layer anti-reflection structure for millimeter and submillimeter wavelengths

We present the design, fabrication, and characterization of a 100 mm diameter, flat, gradient-index (GRIN) lens fabricated with high-resistivity silicon, combined with a three-layer anti-reflection (AR) structure optimized for 160-355 GHz. Multi-depth, deep reactive-ion etching (DRIE) enables patterning of silicon wafers with sub-wavelength structures (posts or holes) to locally change the effective refractive index and thus create anti-reflection layers and a radial index gradient. The structures are non-resonant and, for sufficiently long wavelengths, achromatic. Hexagonal holes varying in size with distance from the optical axis create a parabolic index profile decreasing from 3.15 at the center of the lens to 1.87 at the edge. The AR structure consists of square holes and cross-shaped posts. We have fabricated a lens consisting of a stack of five 525 $μ$m thick GRIN wafers and one AR wafer on each face. We have characterized the lens over the frequency range 220-330 GHz, obtaining behavior consistent with Gaussian optics down to -14 dB and transmittance between 75% and 100%.

physics.optics↗

arXiv2024

Characterization of the low electric field and zero-temperature two-level-system loss in hydrogenated amorphous silicon

Two-level systems (TLS) are an important, if not dominant, source of loss and noise for superconducting resonators such as those used in kinetic inductance detectors and some quantum information science platforms. They are similarly important for loss in photolithographically fabricated superconducting mm-wave/THz transmission lines. For both lumped-element and transmission-line structures, native amorphous surface oxide films are typically the sites of such TLS in non-microstripline geometries, while loss in the (usually amorphous) dielectric film itself usually dominates in microstriplines. We report here on the demonstration of low TLS loss at GHz frequencies in hydrogenated amorphous silicon (a-Si:H) films deposited by plasma-enhanced chemical vapor deposition in superconducting lumped-element resonators using parallel-plate capacitors (PPCs). The values we obtain from two recipes in different deposition machines, 7$\,\times\,10^{-6}$ and 12$\,\times\,10^{-6}$, improve on the best achieved in the literature by a factor of 2--4 for a-Si:H and are comparable to recent measurements of amorphous germanium. Moreover, we have taken care to extract the true zero-temperature, low-field loss tangent of these films, accounting for temperature and field saturation effects that can yield misleading results. Such robustly fabricated and characterized films render the use of PPCs with deposited amorphous films a viable architecture for superconducting resonators, and they also promise extremely low loss and high quality factor for photolithographically fabricated superconducting mm-wave/THz transmission lines used in planar antennas and resonant filters.

physics.ins-det↗

arXiv2024

Hierarchical phased-array antennas coupled to Al KIDs: a scalable architecture for multi-band mm/submm focal planes

We present the optical characterization of two-scale hierarchical phased-array antenna kinetic inductance detectors (KIDs) for millimeter/submillimeter wavelengths. Our KIDs have a lumped-element architecture with parallel plate capacitors and aluminum inductors. The incoming light is received with a hierarchical phased array of slot-dipole antennas, split into 4 frequency bands (between 125 GHz and 365 GHz) with on-chip lumped-element band-pass filters, and routed to different KIDs using microstriplines. Individual pixels detect light for the 3 higher frequency bands (190-365 GHz) and the signals from four individual pixels are coherently summed to create a larger pixel detecting light for the lowest-frequency band (125-175 GHz). The spectral response of the band-pass filters was measured using Fourier transform spectroscopy (FTS), the far-field beam pattern of the phased-array antennas was obtained using an infrared source mounted on a 2-axis translating stage, and the optical efficiency of the KIDs was characterized by observing loads at 294 K and 77 K. We report on the results of these three measurements.

astro-ph.IM↗

arXiv2022

A multi-chroic kinetic inductance detectors array using hierarchical phased array antenna

We present a multi-chroic kinetic inductance detector (KID) pixel design integrated with a broadband hierarchical phased-array antenna. Each low-frequency pixel consists of four high-frequency pixels. Four passbands are designed from 125 to 365 GHz according to the atmospheric windows. The lumped element KIDs consist of 100-nm thick AlMn inductors and Nb parallel plate capacitors with hydrogenated amorphous Si dielectric. Two different coupling structures are designed to couple millimeter-wave from microstrip lines to KIDs. The KID designs are optimized for a 10-m-class telescope at a high, dry site, for example, the Leighton Chajnantor Telescope. Preliminary measurement results using Al KIDs are discussed.

astro-ph.IM↗

arXiv2019

Flat low-loss silicon gradient index lens for millimeter and submillimeter wavelengths

We present the design, simulation, and planned fabrication process of a flat high resistivity silicon gradient index (GRIN) lens for millimeter and submillimeter wavelengths with very low absorption losses. The gradient index is created by subwavelength holes whose size increases with the radius of the lens. The effective refractive index created by the subwavelength holes is constant over a very wide bandwidth, allowing the fabrication of achromatic lenses up to submillimeter wavelengths. The designed GRIN lens was successfully simulated and shows an expected efficiency better than that of a classic silicon plano-concave spherical lens with approximately the same thickness and focal length. Deep reactive ion etching (DRIE) and wafer-bonding of several patterned wafers will be used to realize our first GRIN lens prototype.

astro-ph.IM↗

arXiv2018

A 1.6:1 Bandwidth Two-Layer Antireflection Structure for Silicon Matched to the 190-310 GHz Atmospheric Window

Although high-resistivity, low-loss silicon is an excellent material for THz transmission optics, its high refractive index necessitates antireflection treatment. We fabricated a wide-bandwidth, two-layer antireflection treatment by cutting subwavelength structures into the silicon surface using multi-depth deep reactive ion etching (DRIE). A wafer with this treatment on both sides has <-20 dB (<1%) reflectance over 190-310 GHz. We also demonstrated that bonding wafers introduces no reflection features above the -20 dB level, reproducing previous work. Together these developments immediately enable construction of wide-bandwidth silicon vacuum windows and represent two important steps toward gradient-index silicon optics with integral broadband antireflection treatment.

astro-ph.IM↗