Searcharxiv⌕ Search

arXiv subjects

Fabien Malbet

Publications and source records attributed to Fabien Malbet.

At least 19 recordsLinked to original sources
arXiv2026

Calibrations for high precision differential astrometry onboard Theia and HWO

Future space astrometry missions such as Theia and an astrometric mode of the Habitable Worlds Observatory (HWO) require detector calibration and instrumental characterization at an unprecedented level to achieve sub-micro-arcsecond precision. This work presents three complementary developments addressing these requirements. First, we report an independent characterization of the GIGAPYX-4600 back-side illuminated CMOS detector, evaluating its linearity, readout noise, dark current, pixel response non-uniformity, defective pixel fraction, and inter-pixel capacitance. The results demonstrate excellent detector performance and confirm its suitability as a candidate for future gigapixel focal planes. Second, we develop an interferometric calibration method based on Young's fringes to measure pixel centroid displacements, enabling the characterization of inter-pixel response variations with an approach compatible with onboard implementation. The method is investigated through numerical simulations and an experimental testbed using the GIGAPYX-4600 detector. Finally, we introduce an astro-calibration framework that jointly estimates stellar astrometric parameters, telescope attitude, plate scale, and optical distortion through a global iterative optimization. Although this calibration approach is still under development, simulations and laboratory activities are underway to validate its performance. Together, these developments contribute to the technological and calibration framework required for the next generation of high-precision astrometric space missions.

astro-ph.IM↗
arXiv2026

Setup and performance of focal-plane characterization benches for high precision astrometry

Detecting Earth-like exoplanets requires micro-arcsecond astrometry, which relies on a precisely calibrated focal plane equipped with high-resolution detectors. Accurate calibration depends on characterizing detector imperfections and systematic effects. Optical benches have been developed to assess the sensor's behavior: an integrating-sphere setup for electro-optical parameters, an interferometric bench for pixel-level geometry, and a star-field projection system for intrinsic distortion. This work presents the characterization benches built for a 46-Megapixels (MP) imaging sensor, based on the same technology as the four 220-MP detectors foreseen for the final focal-plane, and the performance metrics obtained from these setups in the context of NASA's HWO and ESA's M-class missions. Upgrades will bring the test environment closer to operational conditions: a second 46-MP sensor will be added for multi-detector tests, plus an adjustable-angle fringeprojection system and improved alignment.

physics.optics↗
arXiv2026

Pixel-Level Calibration for Space-Based High Precision Astrometry Using Young's Fringes

The detection of Earth-like exoplanets via astrometry necessitates centroiding precision at the 0.3 microarcsec level, thereby imposing stringent constraints on the focal plane geometry of space telescopes. The AGATE focal plane instrument, a proposed component of the NASA Habitable Worlds Observatory (HWO), aims to achieve this objective through the calibration of the intra-pixel response function of CMOS detectors to an accuracy of 50 micropixel (220 nm The present paper proposes a Young's fringes-based calibration method, derived from those employed by JPL and IPAG, for the purpose of mapping the pixel response barycenter offsets across the detector. Using a Pyxalis GIGAPYX-4600 CMOS sensor, we demonstrate via simulations and laboratory measurements that (1) a precision of 500 micropixel is achievable with 10,000 frames (current setup); (2) inter-pixel capacitance crosstalk and fringe hyperbolicity are dominating the errors at small and large scales, respectively; and, (3) an iterative inverse problem approach with a hyperbolic fringe model is proposed to overcome paraxial approximation limits for 1 Gpix focal planes. These results pave the way for on-board calibration of HWO's astrometric instrument, ensuring the sub-microarcsec precision required for exo-Earth detection.

astro-ph.IM↗
arXiv2025

System Analysis for a high-precision high-accuracy Astrometric instrument for HWO

This study presents a comprehensive system analysis for an instrument onboard the Habitable Worlds Observatory (HWO), designed for high-precision, high-accuracy differential astrometry, with the primary scientific goal to determine the mass of Earth-like planets around the nearest Sun-like stars. The analysis integrates the definition of the mission profile, the instrumental concept architecture, and an error budget that breaks down the key contributors to the sub-micro arcses precision required for a single measurement. A portion of this budget addresses photo-center estimation for both the target and calibration stars used in differential astrometry. Other major contributors are related to instrumental control of systematics in the reconstruction of differential angle measurements from pixel data (focal plane calibration) to on sky line of sight (telescope distortion calibration). End-of-mission astrometry requires multiple observations (typically 100) of the same target distributed over the mission lifetime. We assess the mission profile to estimate the fraction of survey time required for astrometric survey to achieve the science objective. The proposed architecture of the instrument concept is derived from error budget and mission constraints based on a large visible detector array composed of an assembly of multiple CMOS sensor chips resulting in an overall gigapixel focal plane. We evaluate the Technology Readiness Level (TRL) and propose a way forward reaching TRL 5 level for key technologies by the Mission Consolidation Review in 2029.

astro-ph.IM↗
arXiv2025

Very High Precision Astrometry for Exoplanets and Dark Matter with the Habitable Worlds Observatory

Astrometry, one of the oldest branches of astronomy, has been revolutionized by missions like Hipparcos and especially Gaia, which mapped billions of stars with extraordinary precision. However, challenges such as detecting Earth-like exoplanets in nearby habitable zones and probing the influence of dark matter in galactic environments require sub-microarcsecond accuracy. With a 6--8 meter large-aperture telescope operating across at visible wavelengths, the Habitable Worlds Observatory by NASA can combine astrometry and direct imaging to detect rocky exoplanets within 10 parsecs and study their atmospheres. We consider here the scientific requirements and present a concept for a dedicated astrometric instrument on HWO. It is capable to produce diffraction-limited images of large fields, achieving a point-spread function (PSF) precision of 20 milliarcseconds. Equipped with a detector calibration system, HWO can perform high precision astrometry, and, detect and measure the orbit of Earth-mass planets in the habitable zone of Nearby Solar-type stars. HWO can dramatically improve current constraints on the self- interaction cross-section of heavy dark matter particles (WIMPs) and on the masses of ultra-high dark matter particles, through the study of stellar motions in galactic environments. The visible channel of the instrument features a large CMOS-based focal plane with stitched pixel arrays, enabling a large field of view. The ``Detector Calibration Unit'' system uses interferometric laser fringes to calibrate pixel positions. Using differential astrometry and pointed observations with a stable telescope design enables extended integration times, enhancing sensitivity to sub-microarcsecond precision for detecting exoplanets and studying dark matter through stellar motion.

astro-ph.IM↗
arXiv2025

Experimental tests of the calibration of high precision differential astrometry for HWO

Many different scientific applications require sub-micro arcsecond precision astrometry, including researching rocky exoplanets in the vicinity of the Sun and studying dark matter. The Habitable Worlds Observatory (HWO) is a promising candidate to carry an astrometric instrument because it provides a stable, space-based telescope with a large aperture, which allows faint sources and small displacements to be observed. This paper presents the characterization of an appropriate detector for an astrometric instrument: the 46Mpx Gigapyx from Pyxalis. Moreover it explains the implementation of a testbed enabling interferometric characterization of pixel positions. Finally, the paper introduces a method for calibrating the telescope's optical distortion. This method was implemented in simulation and tested thanks to an optical bench developed at IPAG in France.

astro-ph.IM↗
arXiv2024

Experimental tests of the calibration of high precision differential astrometry for exoplanets

High precision differential Astrometry is the branch of astronomy that evaluates the relative position, distance and motion of celestial objects with respect to the stars present in the field of view. A mission called Theia has been submitted in 2022 for ESA's M7 call for missions, using a diffraction-limited telescope about 1m in diameter and with a field of view of 0.5 degrees, capable of achieving sub-micro-arcsecond angular accuracy, corresponding to 1e-5 pixel on the detector. Such precision makes it possible to study the nature of dark matter in our galaxy and to reveal the architecture of exoplanetary systems close to the Sun, down to the mass of the Earth. The aim of the experimental tests presented in this poster is to improve the TRL of 2 specific aspects: the calibration of new CMOS detectors with very large number of pixels and the calibration of the telescope aberrations.First, a key element of such a space telescope is the focal plane, which must be calibrated spatially with an extreme precision down to the 1e-5 pixel level. Previous work has shown that this is possible with small detector matrices (80x80 px) [1]. The goal is now to check the performances and validate this method with the new very large detectors. Pyxalis, a company based near Grenoble, is developing very large detectors (8000x5000 px) that have a low noise level and high sensitivity. The aim is to characterize and validate this type of detectors in a laboratory demonstration (see poster Pancher et al.), to ensure that the performance achieved meets the required specifications. We present the results of these characterization in this contribution.The telescope stability is also a sensitive issue. Recent work [2] has shown that the reference stars in the field of the telescope can be used as actual metrology sources in order to compute the field distortion function. Our simulations allow to model the optical aberrations with bivariate polynoms. The effects on the calibration accuracy of the degrees of the polynoms, the number of reference stars and the tilt perturbation of the M2 mirror are investigated. This poster will present the latest results obtained on a test bed developed to experimentally study the performances of this new field calibration method.

astro-ph.IM↗
arXiv2024

High Precision Astrometry Science in the Context of Space Mission Prospectives

Astrometry is one of the oldest branches of astronomy which measures the position, the proper motion and parallax of celestial objects. Following the Hipparcos and Gaia missions that have measured several billions of them using global astrometry, we propose to increase astrometry precision on pointed objects using differential astrometry in a large field in order to unravel rocky planets in habitable zones of stars in the Sun vicinity and investigate the nature of dark matter in galactic environments as recommended by the ESA Senior Committee in the Voyager 2050 prospective. Substantial technology developments in a number of critical areas is needed in order to reach the highest required precision of sub-micro-arcsecond. One of them is CMOS image sensors using the stitching technique to merge the multiple design structures on the wafer and produce array with very large number of pixels. Another one is to calibrate the pixel positions using projecting modulating interferometric laser fringes on the array. Finally, the distortion of the optical system can be monitored and compensated using reference stars as metrology sources. The final precision depends on the diameter and the field of view of the telescope that is used as well as the time spent on each target. We present here the science goals that can be achieved with such missions either within the framework of an ESA Medium-class mission or even in the NASA most challenging Habitable Worlds Observatory, a large space telescope recommended by the American Astronomy and Astrophysics prospective for the 2020s and designed specifically to search for signs of life on planets orbiting other stars.

astro-ph.EP↗
arXiv2024

Laboratory characterisation bench for high precision astrometry

High precision differential astrometry assesses the positions, distances, and motions of celestial objects in relation to the stars. The focal plane of such space telescope must be calibrated with a precision down to the level of 1e-5 pixel in order to be able to detect Earth-like planets in the close vicinity of the Sun. The presented characterization bench is designed to improve the technology readiness level for the following key points: calibration of new detectors with a high number of pixels and correcting the field distortion using stars in the field of view. The first aim of the project concentrates on the characterization of a 46 megapixels sensor from PYXALIS, to assess its typical parameters using an integrating sphere. The next objective intends to map the intra and extra pixel quantum yield of the detector with a precision of 1e-5 pixels and investigate the evolution of the pixel geometry in response to environment fluctuations. To conduct these tests, an optical bench is designed with an LCD screen and a doublet, used as a source that allows directing light to specific groups of pixels. Interferometric calibration of the detector pixel centroid position will be achieved using fibers that illuminate the detector with Young's fringes. To characterize the distortion of the detector, a diaphragm will produce adjustable optical aberrations to be corrected and therefore change the source sensor positional relationship. The final step involves the simulation of a star's field, which will be imaged on the detector to assess optical quality.

astro-ph.IM↗
arXiv2024

"My Earth" Astrophysics and Planets -- a serious game to build low carbon scenarios in the astronomy academic community

This report summarizes what has happened in the mini-workshops entitled ''My Earth in 180 minutes'' organized during the lunch break at the SF2A 2024 conference in Marseille. The project showcased an innovative serious game designed to raise awareness of greenhouse gas (GHG) emissions in astronomical research laboratories. Participants, organized into teams, simulate strategies to reduce their carbon footprints by 50\%, focusing on key astronomical activities such as space instrumentation, data analysis, and laboratory work. The sessions highlight the challenges of achieving significant emissions reductions without disrupting core research activities, such as telescope observations. While the serious game facilitates important discussions on sustainable practices, the results point to the need for broader engagement, adaptation to different cultural contexts, and institutional support. The project highlights the importance of integrating climate action into the academic environment and suggests potential future directions for expanding its impact.

astro-ph.IM↗
arXiv2023

Environmental transition: overview of actions to reduce the environmental footprint of astronomy

To keep current global warming below 1.5°C compared with the pre-industrial era, measures must be taken as quickly as possible in all spheres of society. Astronomy must also make its contribution. In this proceeding, and during the workshop to which it refers, different levers of actions are discussed through various examples: individual efforts, laboratory-level actions, impact evaluation and mitigation in major projects, institutional level, and involvement through collectives.

astro-ph.IM↗
arXiv2022

Theia : science cases and mission profiles for high precision astrometry in the future

High-precision astrometry well beyond the capacities of Gaia will provide a unique way to achieve astrophysical breakthroughs, in particular on the nature of dark matter, and a complete survey of nearby habitable exoplanets. In this contribution, we present the scientific cases that require a flexibly-pointing instrument capable of high astrometric accuracy and we review the best mission profiles that can achieve such observations with the current space technology as well as within the boundary conditions defined by space agencies. We also describe the way the differential astrometric measurement is made using reference stars within the field. We show that the ultimate accuracy can be met without drastic constrains on the telescope stability.

astro-ph.IM↗
arXiv2021

Faint objects in motion: the new frontier of high precision astrometry

Sky survey telescopes and powerful targeted telescopes play complementary roles in astronomy. In order to investigate the nature and characteristics of the motions of very faint objects, a flexibly-pointed instrument capable of high astrometric accuracy is an ideal complement to current astrometric surveys and a unique tool for precision astrophysics. Such a space-based mission will push the frontier of precision astrometry from evidence of Earth-mass habitable worlds around the nearest stars, to distant Milky Way objects, and out to the Local Group of galaxies. As we enter the era of the James Webb Space Telescope and the new ground-based, adaptive-optics-enabled giant telescopes, by obtaining these high precision measurements on key objects that Gaia could not reach, a mission that focuses on high precision astrometry science can consolidate our theoretical understanding of the local Universe, enable extrapolation of physical processes to remote redshifts, and derive a much more consistent picture of cosmological evolution and the likely fate of our cosmos. Already several missions have been proposed to address the science case of faint objects in motion using high precision astrometry missions: NEAT proposed for the ESA M3 opportunity, micro-NEAT for the S1 opportunity, and Theia for the M4 and M5 opportunities. Additional new mission configurations adapted with technological innovations could be envisioned to pursue accurate measurements of these extremely small motions. The goal of this White Paper is to address the fundamental science questions that are at stake when we focus on the motions of faint sky objects and to briefly review instrumentation and mission profiles.

astro-ph.IM↗
arXiv2017

Theia: Faint objects in motion or the new astrometry frontier

In the context of the ESA M5 (medium mission) call we proposed a new satellite mission, Theia, based on relative astrometry and extreme precision to study the motion of very faint objects in the Universe. Theia is primarily designed to study the local dark matter properties, the existence of Earth-like exoplanets in our nearest star systems and the physics of compact objects. Furthermore, about 15 $\%$ of the mission time was dedicated to an open observatory for the wider community to propose complementary science cases. With its unique metrology system and "point and stare" strategy, Theia's precision would have reached the sub micro-arcsecond level. This is about 1000 times better than ESA/Gaia's accuracy for the brightest objects and represents a factor 10-30 improvement for the faintest stars (depending on the exact observational program). In the version submitted to ESA, we proposed an optical (350-1000nm) on-axis TMA telescope. Due to ESA Technology readiness level, the camera's focal plane would have been made of CCD detectors but we anticipated an upgrade with CMOS detectors. Photometric measurements would have been performed during slew time and stabilisation phases needed for reaching the required astrometric precision.

astro-ph.IM↗
arXiv2015

Impact of ηearth on the capabilities of affordable space missions to detect biosignatures on extrasolar planets

We present an analytic model to estimate the capabilities of space missions dedicated to the search for biosignatures in the atmosphere of rocky planets located in the habitable zone of nearby stars. Relations between performance and mission parameters such as mirror diameter, distance to targets, and radius of planets, are obtained. Two types of instruments are considered: coronagraphs observing in the visible, and nulling interferometers in the thermal infrared. Missions considered are: single-pupil coronagraphs with a 2.4 m primary mirror, and formation flying interferometers with 4 x 0.75 m collecting mirrors. The numbers of accessible planets are calculated as a function of ηearth. When Kepler gives its final estimation for ηearth, the model will permit a precise assessment of the potential of each instrument. Based on current estimations, ηearth = 10% around FGK stars and 50% around M stars, the coronagraph could study in spectroscopy only ~1.5 relevant planets, and the interferometer ~14.0. These numbers are obtained under the major hypothesis that the exozodiacal light around the target stars is low enough for each instrument. In both cases, a prior detection of planets is assumed and a target list established. For the long-term future, building both types of spectroscopic instruments, and using them on the same targets, will be the optimal solution because they provide complementary information. But as a first affordable space mission, the interferometer looks the more promising in term of biosignature harvest.

astro-ph.IM↗
arXiv2014

The VLTI / PIONIER near-infrared interferometric survey of southern T Tauri stars. I. First results

Context : The properties of the inner disks of bright Herbig AeBe stars have been studied with near infrared (NIR) interferometry and high resolution spectroscopy. The continuum and a few molecular gas species have been studied close to the central star; however, sensitivity problems limit direct information about the inner disks of the fainter T Tauri stars. Aims : Our aim is to measure some of the properties of the inner regions of disks surrounding southern T Tauri stars. Methods : We performed a survey with the PIONIER recombiner instrument at H-band of 21 T Tauri stars. The baselines used ranged from 11 m to 129 m, corresponding to a maximum resolution of 3mas (0.45 au at 150 pc). Results : Thirteen disks are resolved well and the visibility curves are fully sampled as a function of baseline in the range 45-130 m for these 13 objects. A simple qualitative examination of visibility profiles allows us to identify a rapid drop-off in the visibilities at short baselines in 8 resolved disks. This is indicative of a significant contribution from an extended contribution of light from the disk. We demonstrate that this component is compatible with scattered light, providing strong support to a prediction made by Pinte et al. (2008). The amplitude of the drop-off and the amount of dust thermal emission changes from source to source suggesting that each disk is different. A by-product of the survey is the identification of a new milli-arcsec separation binary: WW Cha. Spectroscopic and interferometric data of AK Sco have also been fitted with a binary and disk model. Conclusions : Visibility data are reproduced well when thermal emission and scattering form dust are fully considered. The inner radii measured are consistent with the expected dust sublimation radii. Modelling of AK Sco suggests a likely coplanarity between the disk and the binary's orbital plane

astro-ph.SR↗
arXiv2013

Sculpting the disk around T Cha: an interferometric view

(Abridged) Circumstellar disks are believed to be the birthplace of planets and are expected to dissipate on a timescale of a few Myr. The processes responsible for the removal of the dust and gas will strongly modify the radial distribution of the dust and consequently the SED. In particular, a young planet will open a gap, resulting in an inner disk dominating the near-IR emission and an outer disk emitting mostly in the far-IR. We analyze a full set of data (including VLTI/Pionier, VLTI/Midi, and VLT/NaCo/Sam) to constrain the structure of the transition disk around TCha. We used the Mcfost radiative transfer code to simultaneously model the SED and the interferometric observations. We find that the dust responsible for the emission in excess in the near-IR must have a narrow temperature distribution with a maximum close to the silicate sublimation temperature. This translates into a narrow inner dusty disk (0.07-0.11 AU). We find that the outer disk starts at about 12 AU and is partially resolved by the Pionier, Sam, and Midi instruments. We show that the Sam closure phases, interpreted as the signature of a candidate companion, may actually trace the asymmetry generated by forward scattering by dust grains in the upper layers of the outer disk. These observations help constrain the inclination and position angle of the outer disk. The presence of matter inside the gap is difficult to assess with present-day observations. Our model suggests the outer disk contaminates the interferometric signature of any potential companion that could be responsible for the gap opening, and such a companion still has to be unambiguously detected. We stress the difficulty to observe point sources in bright massive disks, and the consequent need to account for disk asymmetries (e.g. anisotropic scattering) in model-dependent search for companions.

astro-ph.SR↗