Searcharxiv⌕ Search

arXiv subjects

Fabio Chiarello

Publications and source records attributed to Fabio Chiarello.

13 recordsLinked to original sources
arXiv2026

Bose condensation and Bogoliubov excitation in resonator-embedded superconducting qubit network

Superconducting qubit networks (SQNs) embedded in a low-dissipative resonator is a promising device allowing one not only to establish the collective quantum dynamics on a macroscopic scale but also to greatly enhance the sensitivity of detectors of microwave photons. A quantum ac Stark effect provided by coupling between an SQN and microwave photons of a resonator, leads to a strong nonlinear interaction between photons. Here, we present a two-tone spectroscopy experiment in which a set of 10 superconducting flux qubits is coupled to the input R- resonator and the output T- transmission line. An external microwave pump field close to the resonance frequency populates macroscopically the resonator mode as a Bose-Einstein condensate, while a second probe beam scans the resonances referred also as Bogoliubov-like excitations. The corresponding excitation frequency measured from the transmission coefficient, |S21(f)| displays an abrupt change of the resonant dip position once the power of the pump field overcomes a critical value Pcr. This sharp shift occurs in a narrow region of pump frequencies, and can be tuned by an applied magnetic field. It is a signature of bistability of the photon number inside the resonator, in agreement with theory.

quant-ph↗
arXiv2025

The TES-based Cryogenic AntiCoincidence Detector of ATHENA X-IFU: Validation of the thermal end-to-end simulator towards the updated Demonstration Model (DM 1.1)

The Cryogenic AntiCoincidence Detector (CryoAC) is a key element of the X-ray Integral Field Unit (X-IFU) on board the future ATHENA X-ray observatory. It is a TES-based detector designed to reduce the particle background of the instrument, thereby increasing its sensitivity. The detector design is driven by an end-to-end simulator which includes the electro-thermal modelling of the detector and the dynamics of its readout chain. Here, we present the measurements carried out on the last CryoAC single pixel prototype, namely DM127, in order to evaluate the critical thermal parameters of the detector and consequently to tune and validate the CryoAC end-to-end simulator.

astro-ph.IM↗
arXiv2024

Linearly Multiplexed Photon Number Resolving Single-photon Detectors Array

Photon Number Resolving Detectors (PNRDs) are devices capable of measuring the number of photons present in an incident optical beam, enabling light sources to be measured and characterized at the quantum level. In this paper, we explore the performance and design considerations of a linearly multiplexed photon number-resolving single-photon detector array, integrated on a single mode waveguide. Our investigation focus on defining and analyzing the fidelity of such an array under various conditions and proposing practical designs for its implementation. Through theoretical analysis and numerical simulations, we show how propagation losses and dark counts may have a strong impact on the performance of the system and highlight the importance of mitigating these effects in practical implementations.

quant-ph↗
arXiv2024

The end-to-end simulator of the ATHENA X-IFU Cryogenic AntiCoincidence detector (CryoAC)

The X-IFU is one of the two instruments of ATHENA, the next ESA large X-ray observatory. It is a cryogenic spectrometer based on an array of TES microcalorimeters. To reduce the particle background, the TES array works in combination with a Cryogenic AntiCoincidence detector (CryoAC). The CryoAC is a 4-pixel detector, based on ~1 cm2 silicon absorbers sensed by Ir/Au TES. It is required to have a wide energy bandwidth (from 20 keV to ~1 MeV), high efficiency (< 0.014% missed particles), low dead-time (< 1%) and good time-tagging accuracy (10 us at 1 sigma). An end-to-end simulator of the CryoAC detector has been developed both for design and performance assessment, consisting of several modules. First, the in-flight flux of background particles is evaluated by Geant4 simulations. Then, the current flow in the TES is evaluated by solving the electro-thermal equations of microcalorimeters, and the detector output signal is generated by simulating the SQUID FLL dynamics. Finally, the output is analyzed by a high-efficiency trigger algorithm, producing the simulated CryoAC telemetry. Here, we present in detail this end-to-end simulator, and how we are using it to define the new CryoAC baseline configuration in the new Athena context.

astro-ph.IM↗
arXiv2024

Characterization of a Transmon Qubit in a 3D Cavity for Quantum Machine Learning and Photon Counting

In this paper we report the use of superconducting transmon qubit in a 3D cavity for quantum machine learning and photon counting applications. We first describe the realization and characterization of a transmon qubit coupled to a 3D resonator, providing a detailed description of the simulation framework and of the experimental measurement of important parameters, like the dispersive shift and the qubit anharmonicity. We then report on a Quantum Machine Learning application implemented on the single-qubit device to fit the u-quark parton distribution function of the proton. In the final section of the manuscript we present a new microwave photon detection scheme based on two qubits coupled to the same 3D resonator. This could in principle decrease the dark count rate, favouring applications like axion dark matter searches.

quant-ph↗
arXiv2024

Design and simulation of a transmon qubit chip for Axion detection

Quantum Sensing is a rapidly expanding research field that finds one of its applications in Fundamental Physics, as the search for Dark Matter. Devices based on superconducting qubits have already been successfully applied in detecting few-GHz single photons via Quantum Non-Demolition measurement (QND). This technique allows us to perform repeatable measurements, bringing remarkable sensitivity improvements and dark count rate suppression in experiments based on high-precision microwave photon detection, such as for Axions and Dark Photons search. In this context, the INFN Qub-IT project goal is to realize an itinerant single-photon counter based on superconducting qubits that will exploit QND for enhancing Axion search experiments. In this study, we present Qub-IT's status towards the realization of its first superconducting qubit device, illustrating design and simulation procedures and the characterization of fabricated Coplanar Waveguide Resonators (CPWs) for readout. We match target qubit parameters and assess a few-percent level agreement between lumped and distributed element simulation models. We reach a maximum internal quality factor of 9.2x10^5 for -92 dBm on-chip readout power.

quant-ph↗
arXiv2023

Optimal Amplitude Multiplexing of a Series of Superconducting Nanowire Single Photon Detectors

Integrated arrays of Superconducting Nanowire Single Photon Detectors (SNSPDs) have shown capabilities such as Photon Number Resolution, single photon imaging and coincidences detection, and can be effectively used also in other different applications related to quantum optics. The growing complexity of such applications requires the use of multiplexing schemes for the simultaneous readout of different detectors. A simple multiplexing scheme can be realized by arranging a series of SNSPDs elements, shunted by appropriate resistances. The goal of this work is to investigate and optimize this scheme, developing a general method able to identify the optimal sets of shunting resistences for any different application. The methodology obtained is very general, and can be extended to other detection systems.

quant-ph↗
arXiv2021

Status of the SIMP Project: Toward the Single Microwave Photon Detection

The Italian institute for nuclear physics (INFN) has financed the SIMP project (2019-2021) in order to strengthen its skills and technologies in the field of meV detectors with the ultimate aim of developing a single microwave photon detector. This goal will be pursued by improving the sensitivity and the dark count rate of two types of photodetectors: current biased Josephson Junction (JJ) for the frequency range 10-50 GHz and Transition Edge Sensor (TES) for the frequency range 30-100 GHz. Preliminary results on materials and devices characterization are presented.

physics.ins-det↗
arXiv2018

Amplitude-Multiplexed readout of single photon detectors based on superconducting nanowires

The realization of large-scale photonic circuit for quantum optics experiments at telecom wavelengths requires an increasing number of integrated detectors. Superconductive nanowire single photon detectors (SNSPDs) can be easily integrated on chip and they can efficiently detect the light propagating inside waveguides. The thermal budget of cryostats poses a limit on the maximum number of elements that can be integrated on the same chip due to the thermal impact of the readout electronics. In this paper, we propose and implement a novel scheme able for an efficient reading of several SNSPDs with only one readout port, enabling the realization of photonic circuits with a large number of modes.

quant-ph↗
arXiv2006

Static flux bias of a flux qubit using persistent current trapping

Qubits based on the magnetic flux degree of freedom require a flux bias, whose stability and precision strongly affect the qubit performance, up to a point of forbidding the qubit operation. Moreover, in the perspective of multiqubit systems, it must be possible to flux-bias each qubit independently, hence avoiding the traditional use of externally generated magnetic fields in favour of on-chip techniques that minimize cross-couplings. The solution discussed in this paper exploits a persistent current, trapped in a superconducting circuit integrated on chip that can be inductively coupled with an individual qubit. The circuit does not make use of resistive elements that can be detrimental for the qubit coherence. The trapping procedure allows to control and change stepwise the amount of stored current; after that, the circuit can be completely disconnected from the external sources. We show in a practical case how this works and how to drive the bias circuit at the required value.

cond-mat.supr-con↗
arXiv2006

Characterization of a fabrication process for the integration of superconducting qubits and RSFQ circuits

In order to integrate superconducting qubits with rapid-single-flux-quantum (RSFQ) control circuitry, it is necessary to develop a fabrication process that fulfills at the same time the requirements of both elements: low critical current density, very low operating temperature (tens of milliKelvin) and reduced dissipation on the qubit side; high operation frequency, large stability margins, low dissipated power on the RSFQ side. For this purpose, VTT has developed a fabrication process based on Nb trilayer technology, which allows the on-chip integration of superconducting qubits and RSFQ circuits even at very low temperature. Here we present the characterization (at 4.2 K) of the process from the point of view of the Josephson devices and show that they are suitable to build integrated superconducting qubits.

cond-mat.supr-con↗
arXiv2005

Superconducting tunable flux qubit with direct readout scheme

We describe a simple and efficient scheme for the readout of a tunable flux qubit, and present preliminary experimental tests for the preparation, manipulation and final readout of the qubit state, performed in incoherent regime at liquid Helium temperature. The tunable flux qubit is realized by a double SQUID with an extra Josephson junction inserted in the large superconducting loop, and the readout is performed by applying a current ramp to the junction and recording the value for which there is a voltage response, depending on the qubit state. This preliminary work indicates the feasibility and efficiency of the scheme.

cond-mat.supr-con↗