arXiv subjects

Fabio Di Gioacchino

Publications and source records attributed to Fabio Di Gioacchino.

3 recordsLinked to original sources

arXiv2026

Matrix-free phase-field modeling of fracture in micromechanical testing simulations of inelastic materials

Resolving steep damage gradients across diffuse cracks in the phase-field modeling of fracture favors the use of high-order finite elements, for which matrix-free methods can provide superior performance and scalability. Here, we implement the Peric & Dettmer constitutive framework for visco-elastoplastic materials in an open source solid mechanics library supporting matrix-free operators for high-order finite elements with p-multigrid preconditioning on GPUs. We introduce a rheological fracture element assembled in series so that inelastic and fracture properties can appear to affect each other only at homogenization length scales. Numerical simulations of tensile and compressive tests are conducted for synthetic particle-matrix microstructures on an El Capitan high performance computing prototype. Results are shown to reproduce characteristic inelastic responses and crack propagation patterns.

physics.comp-ph↗

arXiv2025

Calibrating a Finite-strain Phase-field Model of Fracture for Bonded Granular Materials with Uncertainty Quantification

To study the mechanical behavior of mock high explosives, an experimental and simulation program was developed to calibrate, with quantified uncertainty, a material model of the bonded granular material Idoxuridine and nitroplasticized Estane-5703. This paper reports on the efficacy of such a framework as a generalizable methodology for calibrating material models against experimental data with uncertainty quantification. Additionally, this paper studies the effect of two manufacturing temperatures and three initial granular configurations on the unconfined compressive behavior of the resulting bonded granular materials. In each of these cases, the same calibration framework was used; in that, hundreds of high-fidelity direct numerical simulations using a new, GPU-enabled, high-performance finite element method software, Ratel, were run to calibrate a finite-strain phase-field fracture model against experimental data. It was found that manufacturing temperature influenced the elastic response of the mock high explosives, with higher temperatures yielding a stiffer response. By contrast, it was found that the initial configuration of the grains had a negligible impact on the overall behavior of the mock high explosives, though it remains possible that local damage accumulation within the specimens could be altered by the initial configurations. Overall, the calibration framework was successful at creating well-calibrated models, showing its usefulness as an engineering and scientific tool.

physics.comp-ph↗

arXiv2019

Crystal plasticity analysis of deformation anisotropy of lamellar TiAl alloy: 3D microstructure-based modelling and in-situ micro-compression

Detailed microstructure characterisation and in-situ micropillar compression were coupled with crystal plasticity-based finite element modelling (CP-FEM) to study the micro-mechanisms of plastic anisotropy in lamellar TiAl alloys. The consideration of microstructure in both simulation and in-situ experiments enables in-depth understanding of micro-mechanisms responsible for the highly anisotropic deformation response of TiAl on the intra-lamella and inter-lamella scales. This study focuses on two specific configurations of γ/α_2 lamellar microstructure with the γ/α_2 interfaces being aligned {25}^o and {55}^o to the loading direction. Microstructure-based CP-FEM shows that longituginal slip of super and ordinary dislocations are most responsible for the plastic anisotropy in the {25}^o micropillar while the anisotropy of the {55}^o micropillar is due to longitudinal superdislocations and longitudinal twins. In addition, transversal superdislocations were more active, making the deformation in the {25}^o micropillar less localised than that in the {55}^o micropillar. Moreover, the CP-FEM model successfully predicted substantial build-up of internal stresses at γ/α_2 interfaces, which is believed to be detrimental to the ductility in TiAl. However, as evidenced by the model, the detrimental internal stresses can be significantly relieved by the activation of transverse deformation twinning, suggesting that the ductility of TiAl can be improved by promoting transverse twins.

cond-mat.mtrl-sci↗