arXiv subjects

Fabio Rossi

Publications and source records attributed to Fabio Rossi.

17 recordsLinked to original sources

arXiv2026

Characterization of the MUSE NFM PSF as a function of atmospheric conditions: TipTop calibration

The Multi Unit Spectroscopic Explorer (MUSE) achieves exceptional spatial resolution in narrow-field mode (NFM) thanks to the GALACSI adaptive optics (AO) system. However, limitations in point spread function (PSF) characterization still hinder the full exploitation of its capabilities. In particular, the current exposure time calculator (ETC) lacks an accurate PSF model, preventing users from reliably predicting the signal-to-noise ratio of NFM observations during proposal preparation. To address this limitation, we analyzed a large set of archival standard-star observations to quantify how NFM PSF properties vary with observing conditions, including airmass, seeing, coherence time, wind speed, and wavelength. We then used this reference dataset to calibrate TipTop, a fast AO PSF simulation tool that will be integrated into the next release of the MUSE NFM ETC. Our results demonstrate that calibration against real on-sky data is essential for accurate PSF modeling. In particular, we find that reproducing realistic PSFs requires both an additional static aberration term and an airmass-dependent tip-tilt jitter component. The calibration performs well at wavelengths longer than 7000 A, while additional corrections are still required at shorter wavelengths, likely due to unmodeled chromatic aberrations. Once implemented in the ETC, this tool will provide condition-dependent NFM PSF predictions and more reliable signal-to-noise estimates.

astro-ph.IM↗

arXiv2026

DM/WFS mis-registration tracking: Implementation and on-sky validation of SPRINT at LBT

The advent of telescopes with an integrated deformable mirror (DM) presents new challenges for adaptive optics (AO) systems. The alignment between the DM and wavefront sensor (WFS) is expected to regularly evolve during operations due to their large separation. Without tracking and correction, these mis-registrations between the DM and WFS lead to loop instability, preventing diffraction limited performance from being realised. SPRINT\cite{heritier2021} provides an approach to track these mis-registrations during observations. Rotation, shift, and magnification mis-registrations can all be recovered. The Large Binocular Telescope (LBT) currently lacks an operational solution for tracking these mis-registrations, while SPRINT has been selected as the baseline approach for several instruments on the forthcoming Extremely Large Telescope (ELT). We report on the implementation of SPRINT into the LBT real time computer and present experimental results from both daytime and on-sky testing to validate the method.

astro-ph.IM↗

arXiv2026

SynIM: a high-performance GPU-accelerated Python library for synthetic interaction and tomographic reconstruction matrices in next-generation adaptive optics

Next-generation Adaptive Optics (AO) systems for 8-40m class telescopes, such as MORFEO (ELT) and MAVIS (VLT), demand high calibration accuracy. Controlling thousands of actuators makes experimental calibration unfeasible due to daytime overheads, environmental disturbances, and opto-mechanical aberrations. Consequently, model-based (synthetic) calibration has become the mandatory standard. We present SynIM, an open-source Python library designed for computing high-fidelity synthetic Interaction, Projection, and Covariance Matrices. SynIM leverages GPU acceleration via CuPy to handle the massive dimensionality of high-order systems. A core innovation is its handling of spatial geometry via composite affine transformations and absolute sub-pixel grid alignment. By merging DM and WFS shifts, rotations, and magnifications into a single operation, SynIM minimizes interpolation artifacts. SynIM introduces an optimized numerical derivative engine for slope computation that mathematically aligns spatial grids at the sub-pixel level, closely mimicking the physical behavior of Shack-Hartmann sensors. It outperforms geometric estimators like the G-tilt telescoping sum at high spatial frequencies, while yielding a substantial computational speed-up. Crucially, end-to-end MCAO simulations demonstrate that reconstructors built with SynIM deliver closed-loop AO performance practically equivalent to full physical optics models. SynIM natively supports SCAO, GLAO, MCAO, and LTAO configurations. It features optimized multi-WFS batch processing, modules for MMSE tomographic reconstructors, and full compatibility with SPRINT for online tracking. Currently driving the design and operational strategies for MORFEO, MAVIS, AOF, KAPA, and WST, SynIM stands as an essential tool for next-generation AO calibration.

astro-ph.IM↗

arXiv2026

Introducing a new generation Adaptive Optics simulation framework: from PASSATA to SPECULA

Numerical end-to-end simulation in Adaptive Optics (AO) is a key tool in the development of complex systems, from the initial design to the commissioning phase. Based on our previous experience with PASSATA, we decided to develop a new AO simulation framework in Python language, naming it SPECULA (short for: Scalable Parallel Execution of Computations Upscaling Large Adaptive optics simulations). Following an object-oriented approach, the physical entities are modeled as processing objects connected to each other to exchange data objects. A simulation is run by providing its description instead of writing and executing a specific script. The Python language and its library flexibility allowed us to write one single code that can be run on CPU and GPU platforms. We put a strong focus on computational efficiency, relying on CuPy and its interface to access the CUDA-stream mechanism. Moreover, SPECULA is capable of distributed computations over multiple processing nodes, making it suitable to run in an HPC environment, as tested on the Italian supercomputer Leonardo. SPECULA can also be used in laboratory environment to implement a hybrid simulation, allowing us to interface simulated and concrete objects: this feature was demonstrated in the Adaptive Optics laboratories at Arcetri Observatory. In this paper, we describe the main characteristics of SPECULA, show some relevant examples of its use, and finally draw our goals for the future.

astro-ph.IM↗

arXiv2025

J1250+0455AB an ultracool binary in a hierarchical triple system

We report the discovery of the ultracool dwarf binary system J1250+0455AB, a low-mass (M$_\odot$$_\mathrm{tot} <$ 0.2 M$_\odot$) system in which the components straddle the M/L dwarf boundary. The binary was resolved through near-infrared adaptive optics imaging with LUCI1-SOUL on the Large Binocular Telescope, revealing a projected angular separation of 0.17 $\pm$ 0.015$\arcsec$, which, combined with a system distance of $71 \pm 5.8$\,pc, corresponds to a physical separation of 12.2 $\pm$ 1.5\,AU at a position angle of 84.8 $\pm$ 0.2{\deg}. We estimated the orbital period of J1250+0455AB to be 156 $\pm$ 8\,yr, the bolometric luminosities of the primary and secondary luminosities as $\log (L_\mathrm{bol} / L_\odot) = -3.45 \pm 0.04$ and $-3.58 \pm 0.04$, respectively, with the spectral types of M9 and L0 determined through binary template fitting and spectrophotometric relations. This binary system is part of a hierarchical triple with a separation of 10.44$\arcsec$ from its primary. We estimated the age of the system from the rotational period of the primary star as $0.56^{+0.07}_{-0.06}$ Gyr. Using evolutionary models, for each component we estimate the mass [0.079 $\pm$ 0.002\,M$_\odot$ / 0.072 $\pm$ 0.003\,M$_\odot$], effective temperature [2350 $\pm$ 38\,K / 2200 $\pm$ 43\,K], and radius [0.113 $\pm$ 0.003\,R$_\odot$ / 0.108 $\pm$ 0.002\,R$_\odot$]. Based on the system's binding energy, total mass, and separation, J1250+0455AB is predicted to be a highly stable system, remaining bound for $>$ 10\,Gyr. J1250+0455AB extends the growing population of UCD benchmark systems, providing a new system for refining evolutionary theories at the lowest stellar masses into the substellar regime.

astro-ph.SR↗

arXiv2023

SOUL at LBT: commissioning results, science and future

The SOUL systems at the Large Bincoular Telescope can be seen such as precursor for the ELT SCAO systems, combining together key technologies such as EMCCD, Pyramid WFS and adaptive telescopes. After the first light of the first upgraded system on September 2018, going through COVID and technical stops, we now have all the 4 systems working on-sky. Here, we report about some key control improvements and the system performance characterized during the commissioning. The upgrade allows us to correct more modes (500) in the bright end and increases the sky coverage providing SR(K)>20% with reference stars G$_{RP}$<17, opening to extragalcatic targets with NGS systems. Finally, we review the first astrophysical results, looking forward to the next generation instruments (SHARK-NIR, SHARK-Vis and iLocater), to be fed by the SOUL AO correction.

astro-ph.IM↗

arXiv2023

TIPTOP: cone effect for single laser adaptive optics systems

TIPTOP is a python library that is able to quickly compute Point Spread Functions (PSF) of any kind of Adaptive Optics systems. This library has multiple objectives: support the exposure time calculators of future VLT and ELT instruments, support adaptive optics systems design activities, be part of PSF reconstruction pipelines and support the selection of the best asterism of natural guide stars for observation preparation. Here we report one of the last improvements of TIPTOP: the introduction of the error given by a single conjugated laser, commonly known as the cone effect. The Cone effect was not introduced before because it is challenging due to the non-stationarity of the phase. Laser guide stars are at a finite distance with respect to the telescope and probe beam accepted by the wavefront sensor has the shape of a cone. Given a single spatial frequency in an atmospheric layer, the cone effect arises from the apparent magnification or stretching of this frequency when it reaches the wavefront sensor. The magnification effect leads to an incorrect estimation of the spatial frequency. Therefore, we estimate the residual power by calculating the difference between two sinusoids with different periods: the nominal one and the magnified one. Replicating this for each spatial frequency we obtain the power spectrum associated with the cone effect. We compare this estimation with the one given by end-to-end simulation and we present how we plan to validate this with on-sky data.

astro-ph.IM↗

arXiv2023

The ESO's Extremely Large Telescope Working Groups

Since 2005 ESO has been working with its community and industry to develop an extremely large optical/infrared telescope. ESO's Extremely Large Telescope, or ELT for short, is a revolutionary ground-based telescope that will have a 39-metre main mirror and will be the largest visible and infrared light telescope in the world. To address specific topics that are needed for the science operations and calibrations of the telescope, thirteen specific working groups were created to coordinate the effort between ESO, the instrument consortia, and the wider community. We describe here the goals of these working groups as well as their achievements so far.

astro-ph.IM↗

arXiv2022

DDO68 C: the actual appearance of a ghost satellite dwarf through adaptive optics at the Large Binocular Telescope

Through adaptive optics (AO) imaging with the SOUL+LUCI instrument at the Large Binocular Telescope we were able to resolve, for the first time, individual stars in the gas-rich galaxy DDO68 C. This system was already suggested to be interacting with the extremely metal poor dwarf DDO68, but its nature has remained elusive so far because of the presence of a bright foreground star close to its line of sight, that hampers a detailed study of its stellar population and distance. In our study, we turned this interloper star into an opportunity to have a deeper insight on DDO68 C, using it as a guide star for the AO correction. Although the new data do not allow for a direct distance measurement through the red giant branch tip method, the combined analysis of the resolved-star color-magnitude diagram, of archival GALEX FUV and NUV photometry, and of H$α$ data provides a self-consistent picture in which DDO68 C is at the same $\sim$13 Mpc distance as its candidate companion DDO68. These results indicate that DDO68 is a unique case of a low mass dwarf, less massive than the Magellanic Clouds, interacting with three satellites (DDO68 C and two previously confirmed accreting systems), providing useful constraints on cosmological models and a potential explanation for its anomalous extremely low metallicity.

astro-ph.GA↗

arXiv2022

LBT SOUL data as a science test bench for MICADO PSF-R tool

Current state-of-the-art adaptive optics (AO) provides ground-based, diffraction-limited observations with high Strehl ratios (SR). However, a detailed knowledge of the point spread function (PSF) is required to fully exploit the scientific potential of these data. This is even more crucial for the next generation AO instruments that will equip 30-meter class telescopes, as the characterization of the PSF will be mandatory to fulfill the planned scientific requirements. For this reason, there is a growing interest in developing tools that accurately reconstruct the observed PSF of AO systems, the so-called PSF reconstruction. In this context, a PSF-R service is a planned deliverable for the MICADO@ELT instrument and our group is in charge of its development. In the case of MICADO, a blind PSF-R approach is being pursued to have the widest applicability to science cases. This means that the PSF is reconstructed without extracting information from the science data, relying only on telemetry and calibrations. While our PSF-R algorithm is currently being developed, its implementation is mature enough to test performances with actual observations. In this presentation we will discuss the reliability of our reconstructed PSFs and the uncertainties introduced in the measurements of scientific quantities for bright, on-axis observations taken with the SOUL+LUCI instrument of the LBT. This is the first application of our algorithm to real data. It demonstrates its readiness level and paves the way to further testing. Our PSF-R algorithm is able to reconstruct the SR and full-width at half maximum of the observed PSFs with errors smaller than 2% and 4.5%, respectively. We carried out the scientific evaluation of the obtained reconstructed PSFs thanks to a dedicated set of simulated observations of an ideal science case.

astro-ph.IM↗

arXiv2022

BRUTE, PSF Reconstruction for the SOUL pyramid-based Single Conjugate Adaptive Optics facility of the LBT

The astronomical applications greatly benefit from the knowledge of the instrument PSF. We describe the PSF Reconstruction algorithm developed for the LBT LUCI instrument assisted by the SOUL SCAO module. The reconstruction procedure considers only synchronous wavefront sensor telemetry data and a few asynchronous calibrations. We do not compute the Optical Transfer Function and corresponding filters. We compute instead a temporal series of wavefront maps and for each of these the corresponding instantaneous PSF. We tested the algorithm both in laboratory arrangement and in the nighttime for different SOUL configurations, adapting it to the guide star magnitudes and seeing conditions. We nick-named it "BRUTE", Blind Reconstruction Using TElemetry, also recalling the one-to-one approach, one slope-to one instantaneous PSF the algorithm applies.

astro-ph.IM↗

arXiv2022

Point spread function reconstruction for SOUL+LUCI LBT data

This paper presents the status of an ongoing project aimed at developing a PSF reconstruction software for adaptive optics (AO) observations. In particular, we test for the first time the implementation of pyramid wave-front sensor data on our algorithms. As a first step in assessing its reliability, we applied the software to bright, on-axis, point-like sources using two independent sets of observations, acquired with the single-conjugated AO upgrade for the Large Binocular Telescope. Using only telemetry data, we reconstructed the PSF by carefully calibrating the instrument response. The accuracy of the results has been first evaluated using the classical metric: specifically, the reconstructed PSFs differ from the observed ones by less than 2% in Strehl ratio and 4.5% in full-width at half maximum. Moreover, the recovered encircled energy associated with the PSF core is accurate at 4% level in the worst case. The accuracy of the reconstructed PSFs has then been evaluated by considering an idealized scientific test-case consisting in the measurements of the morphological parameters of a compact galaxy. In the future, our project will include the analysis of anisoplanatism, low SNR regimes, and the application to multi-conjugated AO observations.

astro-ph.IM↗

arXiv2021

Advances in control of a Pyramid Single Conjugate Adaptive Optics system

Adaptive optics systems are an essential technology for the modern astronomy for ground based telescopes. One of the most recent revolution in the field is the introduction of the pyramid wavefront sensor. The higher performance of this device is payed with increased complexity in the control. In this work we report about advances in the AO system control obtained with SOULat the Large Binocular Telescope. The first is an improved Tip/Tilt temporal control able to recover the nominal correction even in presence of high temporal frequency resonances. The second one is a modal gain optimization that has been successfully tested on sky for the first time. Pyramid wavefront sensors are the key technology for the first light AO systems of all ELTs and the reported advances can be relevant contributions for such systems.

astro-ph.IM↗

arXiv2021

Bringing SOUL on sky

The SOUL project is upgrading the 4 SCAO systems of LBT, pushing the current guide star limits of about 2 magnitudes fainter thanks to Electron Multiplied CCD detector. This improvement will open the NGS SCAO correction to a wider number of scientific cases from high contrast imaging in the visible to extra-galactic source in the NIR. The SOUL systems are today the unique case where pyramid WFS, adaptive secondary and EMCCD are used together. This makes SOUL a pathfinder for most of the ELT SCAO systems like the one of GMT, MICADO and HARMONI of E-ELT, where the same key technologies will be employed. Today we have 3 SOUL systems installed on the telescope in commissioning phase. The 4th system will be installed in a few months. We will present here the results achieved during daytime testing and commissioning nights up to the present date.

astro-ph.IM↗

arXiv2021

TIPTOP: a new tool to efficiently predict your favorite AO PSF

The Adaptive Optics (AO) performance significantly depends on the available Natural Guide Stars (NGSs) and a wide range of atmospheric conditions (seeing, Cn2, windspeed,...). In order to be able to easily predict the AO performance, we have developed a fast algorithm - called TIPTOP - producing the expected AO Point Spread Function (PSF) for any of the existing AO observing modes (SCAO, LTAO, MCAO, GLAO), and any atmospheric conditions. This TIPTOP tool takes its roots in an analytical approach, where the simulations are done in the Fourier domain. This allows to reach a very fast computation time (few seconds per PSF), and efficiently explore the wide parameter space. TIPTOP has been developed in Python, taking advantage of previous work developed in different languages, and unifying them in a single framework. The TIPTOP app is available on GitHub at: https://github.com/FabioRossiArcetri/TIPTOP, and will serve as one of the bricks for the ELT Exposure Time Calculator.

astro-ph.IM↗

arXiv2020

EMCCD for Pyramid wavefront sensor: laboratory characterization

Electro-Multiplying CCDs offer a unique combination of speed, sub-electron noise and quantum efficiency. These features make them extremely attractive for astronomical adaptive optics. The SOUL project selected the Ocam2k from FLI as camera upgrade for the pyramid wavefront sensor of the LBT SCAO systems. Here we present results from the laboratory characterization of the 3 of the custom Ocam2k cameras for the SOUL project. The cameras showed very good noise ($0.4e^-$ and $0.4-0.7e^-$ for binned modes) and dark current values ($1.5e^-$). We measured the camera gain and identified the dependency on power cycle and frame rate. Finally, we estimated the impact of these gain variation in the SOUL adaptive optics system. The impact on the SOUL performance resulted to be negligible.

astro-ph.IM↗

arXiv2019

Elephants, goldfishes and SOUL: a dissertation on forgetfulness and control systems

Adaptive Optics control systems accumulate differential measurements during closed loop operations to estimate turbulence and drive the deformable mirror. But have you ever wondered if your control system should be like an elephant, and never forget, or should it have a weak memory like a goldfish? Are measurement errors always zero mean or does static effects impact performance? Are commands high spatial frequencies good or are you wasting all the inter-actuator stroke for nothing? This work will try to answer these questions showing you results obtained during SOUL commissioning and analysing the impact of the values of the control system poles on Adaptive Optics. So be prepared to focus on forgetfulness and discover the advantages of being a goldfish in a digital world made of elephants.

astro-ph.IM↗