arXiv subjects

Fabio Sebastiano

Publications and source records attributed to Fabio Sebastiano.

At least 19 recordsLinked to original sources

arXiv2025

Power Delivery for Cryogenic Scalable Quantum Applications: Challenges and Opportunities

Quantum technologies offer unprecedented capabilities in computation and secure information transfer. Their implementation requires qubits to operate at cryogenic temperatures (CT) while control and readout electronics typically still remains at room temperature (RT). As systems scale to millions of qubits, the electronics should also operate at CT to avoid a wiring bottleneck. However, wired power transfer from RT for such electronics introduces severe challenges, including thermal load between cooling stages, Joule heating, noise coupling, and wiring scalability. This paper addresses those challenges by evaluating several candidate architectures for scalable power transfer in the dilution frige: high-voltage (HV) wired power transfer, radiative wireless transfer, non-radiative wireless transfer, and a hybrid HV and non-radiative transfer. These architectures are analyzed in terms of thermal load, power loss, heating, coupling noise, power density, scalability, reliability, and complexity. Comparative analysis demonstrates the trade-offs among these architectures, while highlighting HV non-radiative transfer as a promising candidate for scalable quantum systems.

eess.SY↗

arXiv2025

28 GHz Wireless Channel Characterization for a Quantum Computer Cryostat at 4 Kelvin

The scalability of quantum computing systems is constrained by the wiring complexity and thermal load introduced by dense wiring for control, readout and synchronization at cryogenic temperatures. To address this challenge, we explore the feasibility of wireless communication within a cryostat for a multi-core quantum computer, focusing on wireless channel characterization at cryogenic temperatures. We propose to place on-chip differential dipole antennas within the cryostat, designed to operate at 28 GHz in temperatures as low as 4 K. We model the antennas inside a realistic cryostat and, using full-wave electromagnetic simulations, we analyze impedance matching, spatial field distribution, and energy reverberation due to metallic structures. The wireless channel is characterized through measured channel impulse response (CIR) across multiple receiver antenna positions. The results demonstrate potential for reliable shortrange communication with high Signal-to-Noise Ratio (SNR) and limited sensitivity to positional variation, at the cost of nonnegligible delay spread, due to significant multipath effects.

quant-ph↗

arXiv2025

Pulse Shaping for Ultra-Fast Adiabatic Quantum Gates

A fundamental challenge in quantum computing is to increase the number of operations within the qubit coherence time. While this can be achieved by decreasing the gate duration, the use of shorter signals increases their bandwidth and can cause leakage into energetically separated states. A common method to suppress leakage for short pulses is the Derivative Removal by Adiabatic Gate (DRAG) method, which however, relies on IQ modulation of radio-frequency (RF) signals, thus cannot be applied to the baseband signals, e.g., for semiconductor spin qubits. This paper proposes a novel technique, Delayed Leakage Reduction (DLR), that suppresses leakage at targeted frequencies even for baseband control by using time-delayed repetitions of the control signal to enable rapid, high-fidelity operations. We apply DLR on the adiabatic CZ gate between two spin qubits and achieve fidelities exceeding 99.9% within 9.4 ns for a resonance frequency difference of only 100 MHz. Towards the experimental realization of the proposed control method, we also assess the impact on the fidelity of the sampling rate of the electronic hardware generating the control pulse, thus setting the minimum hardware requirements for any experimental demonstration.

quant-ph↗

arXiv2025

On the Impact of Classical and Quantum Communication Networks Upon Modular Quantum Computing Architecture System Performance

Modular architectures are a promising approach to scaling quantum computers beyond the limits of monolithic designs. However, non-local communications between different quantum processors might significantly impact overall system performance. In this work, we investigate the role of the network infrastructure in modular quantum computing architectures, focusing on coherence loss due to communication constraints. We analyze the impact of classical network latency on quantum teleportation and identify conditions under which it becomes a bottleneck. Additionally, we study different network topologies and assess how communication resources affect the number and parallelization of inter-core communications. Finally, we conduct a full-stack evaluation of the architecture under varying communication parameters, demonstrating how these factors influence the overall system performance. The results show that classical communication does not become a bottleneck for systems exceeding one million qubits, given current technology assumptions, even with modest clock frequencies and parallel wired interconnects. Additionally, increasing quantum communication resources generally shortens execution time, although it may introduce additional communication overhead. The optimal number of quantum links between QCores depends on both the algorithm being executed and the chosen inter-core topology. Our findings offer valuable guidance for designing modular architectures, enabling scalable quantum computing.

quant-ph↗

arXiv2024

Cryogenic Characterization of Low-Frequency Noise in 40-nm CMOS

This paper presents an extensive characterization of the low-frequency noise (LFN) at room temperature (RT) and cryogenic temperature (4.2 K) of 40-nm bulk-CMOS transistors. The noise is measured over a wide range of bias conditions and geometries to generate a comprehensive overview of LFN in this technology. While the RT results are in-line with the literature and the foundry models, the cryogenic behavior diverges in many aspects. These deviations include changes with respect to RT in magnitude and bias dependence that are conditional on transistor type and geometry, and even an additional systematic Lorentzian feature that is common among individual devices. Furthermore, we find the scaling of the average LFN with the area and its variability to be similar between RT and 4.2 K, with the cryogenic scaling reported systematically for the first time. The findings suggest that, as no consistent decrease of LFN at lower temperatures is observed while the white noise is reduced, the impact of LFN for precision analog design at cryogenic temperatures gains a more predominant role.

physics.app-ph↗

arXiv2024

Optimizing the Electrical Interface for Large-Scale Color-Center Quantum Processors

Quantum processors based on color centers in diamond are promising candidates for future large-scale quantum computers thanks to their flexible optical interface, (relatively) high operating temperature, and high-fidelity operation. Similar to other quantum-computing platforms, the electrical interface required to control and read out such qubits may limit both the performance of the whole system and its scalability. To address this challenge, this work analyzes the requirements of the electrical interface and investigates how to efficiently implement the electronic controller in a scalable architecture comprising a large number of identical unit cells. Among the different discussed functionalities, a specific focus is devoted to the generation of the static and dynamic magnetic fields driving the electron and nuclear spins, because of their major impact on fidelity and scalability. Following the derived requirements, different system architectures, such as a qubit frequency-multiplexing scheme, are considered to identify the most power efficient approach, especially in the presence of inhomogeneity of the qubit Larmor frequency across the processor. As a result, a non-frequency-multiplexed, 1-mm$^2$ unit-cell architecture is proposed as the optimal solution, able to address up to one electron-spin qubit and 9 nuclear-spin qubits within a 3-mW average power consumption, thus establishing the baseline for the scalable electrical interface for future large-scale color-center quantum computers.

quant-ph↗

arXiv2023

Modeling and Experimental Validation of the Intrinsic SNR in Spin Qubit Gate-Based Readout and Its Impacts on Readout Electronics

In semiconductor spin quantum bits (qubits), the radio-frequency (RF) gate-based readout is a promising solution for future large-scale integration, as it allows for a fast, frequency-multiplexed readout architecture, enabling multiple qubits to be read out simultaneously. This paper introduces a theoretical framework to evaluate the effect of various parameters, such as the readout probe power, readout chain's noise performance, and integration time on the intrinsic readout signal-to-noise ratio (SNR), and thus readout fidelity of RF gate-based readout systems. By analyzing the underlying physics of spin qubits during readout, this work proposes a qubit readout model that takes into account the qubit's quantum mechanical properties, providing a way to evaluate the trade-offs among the aforementioned parameters. The validity of the proposed model is evaluated by comparing the simulation and experimental results. The proposed analytical approach, the developed model, and the experimental results enable designers to optimize the entire readout chain effectively, thus leading to a faster, lower-power readout system with integrated cryogenic electronics.

quant-ph↗

arXiv2023

Scalable multi-chip quantum architectures enabled by cryogenic hybrid wireless/quantum-coherent network-in-package

The grand challenge of scaling up quantum computers requires a full-stack architectural standpoint. In this position paper, we will present the vision of a new generation of scalable quantum computing architectures featuring distributed quantum cores (Qcores) interconnected via quantum-coherent qubit state transfer links and orchestrated via an integrated wireless interconnect.

quant-ph↗

arXiv2023

Real-Time Decoding for Fault-Tolerant Quantum Computing: Progress, Challenges and Outlook

Quantum computing is poised to solve practically useful problems which are computationally intractable for classical supercomputers. However, the current generation of quantum computers are limited by errors that may only partially be mitigated by developing higher-quality qubits. Quantum error correction (QEC) will thus be necessary to ensure fault tolerance. QEC protects the logical information by cyclically measuring syndrome information about the errors. An essential part of QEC is the decoder, which uses the syndrome to compute the likely effect of the errors on the logical degrees of freedom and provide a tentative correction. The decoder must be accurate, fast enough to keep pace with the QEC cycle (e.g., on a microsecond timescale for superconducting qubits) and with hard real-time system integration to support logical operations. As such, real-time decoding is essential to realize fault-tolerant quantum computing and to achieve quantum advantage. In this work, we highlight some of the key challenges facing the implementation of real-time decoders while providing a succinct summary of the progress to-date. Furthermore, we lay out our perspective for the future development and provide a possible roadmap for the field of real-time decoding in the next few years. As the quantum hardware is anticipated to scale up, this perspective article will provide a guidance for researchers, focusing on the most pressing issues in real-time decoding and facilitating the development of solutions across quantum and computer science.

quant-ph↗

arXiv2023

SpinQ: Compilation strategies for scalable spin-qubit architectures

Despite NISQ devices being severely constrained, hardware- and algorithm-aware quantum circuit mapping techniques have been developed to enable successful algorithm executions. Not so much attention has been paid to mapping and compilation implementations for spin-qubit quantum processors due to the scarce availability of experimental devices and their small sizes. However, based on their high scalability potential and their rapid progress it is timely to start exploring solutions on such devices. In this work, we discuss the unique mapping challenges of a scalable crossbar architecture with shared control and introduce SpinQ, the first native compilation framework for scalable spin-qubit architectures. At the core of SpinQ is the Integrated Strategy that addresses the unique operational constraints of the crossbar while considering compilation scalability and obtaining a O(n) computational complexity. To evaluate the performance of SpinQ on this novel architecture, we compiled a broad set of well-defined quantum circuits and performed an in-depth analysis based on multiple metrics such as gate overhead, depth overhead, and estimated success probability, which in turn allowed us to create unique mapping and architectural insights. Finally, we propose novel mapping techniques that could increase algorithm success rates on this architecture and potentially inspire further research on quantum circuit mapping for other scalable spin-qubit architectures.

quant-ph↗

arXiv2022

Spiderweb array: A sparse spin-qubit array

One of the main bottlenecks in the pursuit of a large-scale--chip-based quantum computer is the large number of control signals needed to operate qubit systems. As system sizes scale up, the number of terminals required to connect to off-chip control electronics quickly becomes unmanageable. Here, we discuss a quantum-dot spin-qubit architecture that integrates on-chip control electronics, allowing for a significant reduction in the number of signal connections at the chip boundary. By arranging the qubits in a two-dimensional (2D) array with $\sim$12 $μ$m pitch, we create space to implement locally integrated sample-and-hold circuits. This allows to offset the inhomogeneities in the potential landscape across the array and to globally share the majority of the control signals for qubit operations. We make use of advanced circuit modeling software to go beyond conceptual drawings of the component layout, to assess the feasibility of the scheme through a concrete floor plan, including estimates of footprints for quantum and classical electronics, as well as routing of signal lines across the chip using different interconnect layers. We make use of local demultiplexing circuits to achieve an efficient signal-connection scaling leading to a Rent's exponent as low as $p = 0.43$. Furthermore, we use available data from state-of-the-art spin qubit and microelectronics technology development, as well as circuit models and simulations, to estimate the operation frequencies and power consumption of a million-qubit processor. This work presents a novel and complementary approach to previously proposed architectures, focusing on a feasible scheme to integrating quantum and classical hardware, and significantly closing the gap towards a fully CMOS-compatible quantum computer implementation.

quant-ph↗

arXiv2022

Neural-Network Decoders for Quantum Error Correction using Surface Codes:A Space Exploration of the Hardware Cost-Performance Trade-Offs

Quantum Error Correction (QEC) is required in quantum computers to mitigate the effect of errors on physical qubits. When adopting a QEC scheme based on surface codes, error decoding is the most computationally expensive task in the classical electronic back-end. Decoders employing neural networks (NN) are well-suited for this task but their hardware implementation has not been presented yet. This work presents a space exploration of fully-connected feed-forward NN decoders for small distance surface codes. The goal is to optimize the neural network for high decoding performance, while keeping a minimalistic hardware implementation. This is needed to meet the tight delay constraints of real-time surface code decoding. We demonstrate that hardware based NN-decoders can achieve high decoding performance comparable to other state-of-the-art decoding algorithms whilst being well below the tight delay requirements $(\approx 440\ \mathrm{ns})$ of current solid-state qubit technologies for both ASIC designs $(<30\ \mathrm{ns})$ and FPGA implementations $(<90\ \mathrm{ns})$. These results designates NN-decoders as fitting candidates for an integrated hardware implementation in future large-scale quantum computers.

quant-ph↗

arXiv2020

CMOS-based cryogenic control of silicon quantum circuits

The most promising quantum algorithms require quantum processors hosting millions of quantum bits when targeting practical applications. A major challenge towards large-scale quantum computation is the interconnect complexity. In current solid-state qubit implementations, a major bottleneck appears between the quantum chip in a dilution refrigerator and the room temperature electronics. Advanced lithography supports the fabrication of both CMOS control electronics and qubits in silicon. When the electronics are designed to operate at cryogenic temperatures, it can ultimately be integrated with the qubits on the same die or package, overcoming the wiring bottleneck. Here we report a cryogenic CMOS control chip operating at 3K, which outputs tailored microwave bursts to drive silicon quantum bits cooled to 20mK. We first benchmark the control chip and find electrical performance consistent with 99.99% fidelity qubit operations, assuming ideal qubits. Next, we use it to coherently control actual silicon spin qubits and find that the cryogenic control chip achieves the same fidelity as commercial instruments. Furthermore, we highlight the extensive capabilities of the control chip by programming a number of benchmarking protocols as well as the Deutsch-Josza algorithm on a two-qubit quantum processor. These results open up the path towards a fully integrated, scalable silicon-based quantum computer.

quant-ph↗

arXiv2019

A sparse spin qubit array with integrated control electronics

Current implementations of quantum computers suffer from large numbers of control lines per qubit, becoming unmanageable with system scale up. Here, we discuss a sparse spin-qubit architecture featuring integrated control electronics significantly reducing the off-chip wire count. This quantum-classical hardware integration closes the feasibility gap towards a CMOS quantum computer.

quant-ph↗

arXiv2019

Characterization and Analysis of On-Chip Microwave Passive Components at Cryogenic Temperatures

This paper presents the characterization of microwave passive components, including metal-oxide-metal (MoM) capacitors, transformers, and resonators, at deep cryogenic temperature (4.2 K). The variations in capacitance, inductance and quality factor are explained in relation to the temperature dependence of the physical parameters and the resulting insights on modeling of passives at cryogenic temperatures are provided. Both characterization and modeling, reported for the first time down to 4.2 K, are essential in designing cryogenic CMOS radio-frequency integrated circuits, a promising candidate to build the electronic interface for scalable quantum computers.

physics.app-ph↗

arXiv2019

The electronic interface for quantum processors

Quantum computers can potentially provide an unprecedented speed-up with respect to traditional computers. However, a significant increase in the number of quantum bits (qubits) and their performance is required to demonstrate such quantum supremacy. While scaling up the underlying quantum processor is extremely challenging, building the electronics required to interface such large-scale processor is just as relevant and arduous. This paper discusses the challenges in designing a scalable electronic interface for quantum processors. To that end, we discuss the requirements dictated by different qubit technologies and present existing implementations of the electronic interface. The limitations in scaling up such state-of-the-art implementations are analyzed, and possible solutions to overcome those hurdles are reviewed. The benefits offered by operating the electronic interface at cryogenic temperatures in close proximity to the low-temperature qubits are discussed. Although several significant challenges must still be faced by researchers in the field of cryogenic control for quantum processors, a cryogenic electronic interface appears the viable solution to enable large-scale quantum computers able to address world-changing computational problems.

quant-ph↗

arXiv2018

The impact of classical control electronics on qubit fidelity

Quantum processors rely on classical electronic controllers to manipulate and read out the quantum state. As the performance of the quantum processor improves, non-idealities in the classical controller can become the performance bottleneck for the whole quantum computer. To prevent such limitation, this paper presents a systematic study of the impact of the classical electrical signals on the qubit fidelity. All operations, i.e. single-qubit rotations, two-qubit gates and read-out, are considered, in the presence of errors in the control electronics, such as static, dynamic, systematic and random errors. Although the presented study could be extended to any qubit technology, it currently focuses on single-electron spin qubits, because of several advantages, such as purely electrical control and long coherence times, and for their potential for large-scale integration. As a result of this study, detailed electrical specifications for the classical control electronics for a given qubit fidelity can be derived, as demonstrated with specific case studies. We also discuss the effect on qubit fidelity of the performance of the general-purpose room-temperature equipment that is typically employed to control the few qubits available today. Ultimately, we show that tailor-made electronic controllers can achieve significantly lower power, cost and size, as required to support the scaling up of quantum computers.

quant-ph↗

arXiv2017

A Reconfigurable Cryogenic Platform for the Classical Control of Scalable Quantum Computers

Recent advances in solid-state qubit technology are paving the way to fault-tolerant quantum computing systems. However, qubit technology is limited by qubit coherence time and by the complexity of coupling the quantum system with a classical electronic infrastructure. We propose an infrastructure, enabling to read and control qubits, that is implemented on a field-programmable gate array (FPGA). The FPGA platform supports functionality required by several qubit technologies and can operate physically close to the qubits over a temperature range from 4K to 300K. Extensive characterization of the platform over this temperature range revealed all major components (such as LUTs, MMCM, PLL, BRAM, IDELAY2) operate correctly and the logic speed is very stable. The stability is finally concretized by operating an integrated ADC with relatively stable performance over temperature.

physics.ins-det↗