arXiv subjects

Fabrizio Villa

Publications and source records attributed to Fabrizio Villa.

10 recordsLinked to original sources

arXiv2025

On beam characterization of ground-based CMB radio telescopes using UAV-mounted sources: application to the QUIJOTE TFGI and plans for LSPE-Strip

The Large Scale Polarization Explorer (LSPE) project, funded by the Italian Space Agency (ASI), includes the development of LSPE-Strip, a ground-based radio telescope for observing Cosmic Microwave Background (CMB) anisotropies. LSPE-Strip, nearing its construction phase, will operate from the Teide Observatory in Tenerife, employing 49 coherent polarimeters at 43 GHz to deliver critical data on CMB anisotropies and 6 channels at 95 GHz as atmospheric monitor. On-site characterization of such advanced instruments is crucial to detect possible systematic effects, such as gain fluctuations, beam distortions, and pointing errors, that can compromise performance by introducing spurious polarizations or radiation collection from unintended directions. To address these challenges, a drone-mounted Q-band test source for on-site characterization of LSPE-Strip's polarimeter array was developed. Modern Unmanned Aerial Vehicles (UAVs) offer a flexible approach for antenna pattern measurements, yet their use in high-frequency radio astronomy is not consolidated practice. In October 2022, a UAV-based measurement campaign was conducted with the TFGI instrument on the second QUIJOTE telescope in Tenerife, in collaboration with the Instituto de Astrofisica de Canarias. This pioneering effort aimed to validate UAV-based beam characterization methods and assess QUIJOTE's performance under operational conditions. Preliminary results demonstrated high measurement accuracy, leveraging QUIJOTE's dual-receiver configuration for beam validation. These findings provide valuable insights for optimizing UAV systems in preparation for LSPE-Strip's future characterization.

astro-ph.IM↗

arXiv2025

The LSPE-Strip Pointing Reconstruction and Star Tracker

This paper aims to describe the Pointing Reconstruction Model (PRM) and the prototype Star Tracker, which will be mounted on LSPE-Strip, a microwave Q- and W-band CMB telescope planned for installation at the "Observatorio del Teide" in Tenerife. The PRM integrates information on the instantaneous attitude provided by the telescope control system to determine the actual pointing direction and focal plane orientation of the telescope. It accounts for various non-idealities in the telescope setup, represented by eight configuration angles, which will be calibrated using the Star Tracker. Following the derivation of the PRM formalism and its implementation, we investigate the pointing errors caused by incorrect calibration of these configuration angles to validate the required 1 arcminute maximum systematic pointing error for the LSPE-Strip survey. This paper also describes the main structure and operations of the Star Tracker and presents the results of a campaign of actual sky observations conducted with a prototype. The results demonstrate a Star Tracker RMS accuracy of approximately 3 arcseconds, while systematic errors remain below 10 arcseconds. Based on these results, we analyzed the problem of reconstructing the PRM configuration angles. Two methods for intercalibrating the Star Tracker's pointing direction with respect to the focal plane's pointing direction were examined: (1) observations of planets and (2) observations of a drone carrying both an optical beacon and a radio beacon. In the first case, an intercalibration accuracy between 1/3 arcminute and 1 arcminute is achievable. In the second case, the expected intercalibration accuracy ranges from 0.25 arcminute to 1 arcminute.

astro-ph.IM↗

arXiv2013

In-flight calibration and verification of the Planck-LFI instrument

In this paper we discuss the Planck-LFI in-flight calibration campaign. After a brief overview of the ground test campaigns, we describe in detail the calibration and performance verification (CPV) phase, carried out in space during and just after the cool-down of LFI. We discuss in detail the functionality verification, the tuning of the front-end and warm electronics, the preliminary performance assessment and the thermal susceptibility tests. The logic, sequence, goals and results of the in-flight tests are discussed. All the calibration activities were successfully carried out and the instrument response was comparable to the one observed on ground. For some channels the in-flight tuning activity allowed us to improve significantly the noise performance.

astro-ph.IM↗

arXiv2011

W-band prototype of platelet feed-horn array for CMB polarisation measurements

We present the design and performance of a 2x2 prototype array of corrugated feed-horns in W-band. The module is fabricated using a so-called "platelet" technique by milling Aluminum plates. This technique is suitable for low-cost and scalable high performance applications. Room temperature Return Loss measurements show a low (<-30 dB) reflection over a 30% bandwidth with a maximum matching of -42 dB at 100 GHz for all four antennas. Beam pattern measurements indicate good repeatability and a low (-25 dB) sidelobe and crosspolarisation levels. This work is particularly relevant for future Cosmic Microwave Background polarisation measurements, which require large microwave cryogenic detector arrays coupled to high performance corrugated feed horns.

astro-ph.IM↗

arXiv2010

Planck-LFI: Design and Performance of the 4 Kelvin Reference Load Unit

The LFI radiometers use a pseudo-correlation design where the signal from the sky is continuously compared with a stable reference signal, provided by a cryogenic reference load system. The reference unit is composed by small pyramidal horns, one for each radiometer, 22 in total, facing small absorbing targets, made of a commercial resin ECCOSORB CR (TM), cooled to approximately 4.5 K. Horns and targets are separated by a small gap to allow thermal decoupling. Target and horn design is optimized for each of the LFI bands, centered at 70, 44 and 30 GHz. Pyramidal horns are either machined inside the radiometer 20K module or connected via external electro-formed bended waveguides. The requirement of high stability of the reference signal imposed a careful design for the radiometric and thermal properties of the loads. Materials used for the manufacturing have been characterized for thermal, RF and mechanical properties. We describe in this paper the design and the performance of the reference system.

astro-ph.IM↗

arXiv2010

Planck-LFI radiometers tuning

"This paper is part of the Prelaunch status LFI papers published on JINST: http://www.iop.org/EJ/journal/-page=extra.proc5/jinst" This paper describes the Planck Low Frequency Instrument tuning activities performed through the ground test campaigns, from Unit to Satellite Levels. Tuning is key to achieve the best possible instrument performance and tuning parameters strongly depend on thermal and electrical conditions. For this reason tuning has been repeated several times during ground tests and it has been repeated in flight before starting nominal operations. The paper discusses the tuning philosophy, the activities and the obtained results, highlighting developments and changes occurred during test campaigns. The paper concludes with an overview of tuning performed during the satellite cryogenic test campaign (Summer 2008) and of the plans for the just started in-flight calibration.

astro-ph.IM↗

arXiv2009

Vacuum squeezed light for atomic memories at the D2 cesium line

We report the experimental generation of squeezed light at 852 nm, locked on the Cesium D2 line. 50% of noise reduction down to 50 kHz has been obtained with a doubly resonant optical parametric oscillator operating below threshold, using a periodically-polled KTP crystal. This light is directly utilizable with Cesium atomic ensembles for quantum networking applications

physics.optics↗

arXiv2008

The White Mountain Polarimeter Telescope and an Upper Limit on CMB Polarization

The White Mountain Polarimeter (WMPol) is a dedicated ground-based microwave telescope and receiver system for observing polarization of the Cosmic Microwave Background. WMPol is located at an altitude of 3880 meters on a plateau in the White Mountains of Eastern California, USA, at the Barcroft Facility of the University of California White Mountain Research Station. Presented here is a description of the instrument and the data collected during April through October 2004. We set an upper limit on $E$-mode polarization of 14 $μ\mathrm{K}$ (95% confidence limit) in the multipole range $170<\ell<240$. This result was obtained with 422 hours of observations of a 3 $\mathrm{deg}^2$ sky area about the North Celestial Pole, using a 42 GHz polarimeter. This upper limit is consistent with $EE$ polarization predicted from a standard $Λ$-CDM concordance model.

astro-ph↗

arXiv2007

The Cosmic Foreground Explorer (COFE): A balloon-borne microwave polarimeter to characterize polarized foregrounds

The COsmic Foreground Explorer (COFE) is a balloon-borne microwave polarime- ter designed to measure the low-frequency and low-l characteristics of dominant diffuse polarized foregrounds. Short duration balloon flights from the Northern and Southern Hemispheres will allow the telescope to cover up to 80% of the sky with an expected sensitivity per pixel better than 100 $μK / deg^2$ from 10 GHz to 20 GHz. This is an important effort toward characterizing the polarized foregrounds for future CMB experiments, in particular the ones that aim to detect primordial gravity wave signatures in the CMB polarization angular power spectrum.

astro-ph↗

arXiv2003

A Map of the Cosmic Microwave Background from the BEAST Experiment

We present the first sky maps from the BEAST (Background Emission Anisotropy Scanning Telescope) experiment. BEAST consists of a 2.2 meter off axis Gregorian telescope fed by a cryogenic millimeter wavelength focal plane currently consisting of 6 Q band (40 GHz) and 2 Ka band (30 GHz) scalar feed horns feeding cryogenic HEMT amplifiers. Data were collected from two balloon-borne flights in 2000, followed by a lengthy ground observing campaign from the 3.8 Km altitude University of California White Mountain Research Station. This paper reports the initial results from the ground based observations. The instrument produced an annular map covering the sky from declinateion 33 to 42 degrees. The maps cover an area of 2470 square degrees with an effective resolution of 23 arcminutes FWHM at 40 GHz and 30 arcminutes at 30 GHz. The map RMS (smoothed to 30 arcminutes and excluding galactic foregrounds) is 54 +-5 microK at 40 GHz. Comparison with the instrument noise gives a cosmic signal RMS contribution of 28 +-3 microK. An estimate of the actual CMB sky signal requires taking into account the l-space filter function of our experiment and analysis techniques, carried out in a companion paper (O'Dwyer et al. 2003). In addition to the robust detection of CMB anisotropies, we find a strong correlation between small portions of our maps and features in recent H$α$ maps (Finkbeiner, 2003). In this work we describe the data set and analysis techniques leading to the maps, including data selection, filtering, pointing reconstruction, mapmaking algorithms and systematic effects. A detailed description of the experiment appears in Childers et al. (2003).

astro-ph↗