arXiv subjects

Farhad Merchant

Publications and source records attributed to Farhad Merchant.

At least 19 recordsLinked to original sources

arXiv2026

ExSpike: A General Full-Event Neuromorphic Architecture for Exploiting Irregular Sparsity with Event Compression

Spiking neural networks (SNNs) promise energy-efficient computing due to their sparse spatio-temporal activity. However, effectively translating such irregular sparsity into practical performance and energy gains remains challenging, as full-event computing architectures are still underexplored. This paper proposes ExSpike, a general full-event neuromorphic architecture that fully exploits irregular sparsity in SNNs. To realize pure event-driven execution, we first propose a set of dataflow optimizations to ensure that the inputs to each SNN layer remain spike-based, thereby enabling full-event execution throughout the network. We then design a hardware-efficient full-event architecture, named ExSpike, which supports the optimized pure event-driven dataflow and an additional Attention Core for spike-driven self-attention. To further improve computing efficiency, we introduce adjacent-position event compression to reduce redundant accumulations across spatially adjacent spike sequences. ExSpike is implemented on an AMD Xilinx Virtex-7 FPGA and evaluated on both classification and segmentation workloads. Experimental results show that ExSpike achieves high normalized energy efficiency across diverse SNN models while maintaining competitive accuracy, delivering up to 479.15 GOPS, 281.85 GOPS/W, and 0.80 GOPS/W/PE. In particular, ExSpike achieves up to 10$\times$ higher PE-normalized energy efficiency than the SOTA FPGA-based SNN accelerator (FireFly-T). The code for ExSpike is available at https://github.com/xiaoyuehai/ExSpike.

cs.AR↗

arXiv2025

NEURAL: An Elastic Neuromorphic Architecture with Hybrid Data-Event Execution and On-the-fly Attention Dataflow

Spiking neural networks (SNNs) have emerged as a promising alternative to artificial neural networks (ANNs), offering improved energy efficiency by leveraging sparse and event-driven computation. However, existing hardware implementations of SNNs still suffer from the inherent spike sparsity and multi-timestep execution, which significantly increase latency and reduce energy efficiency. This study presents NEURAL, a novel neuromorphic architecture based on a hybrid data-event execution paradigm by decoupling sparsity-aware processing from neuron computation and using elastic first-in-first-out (FIFO). NEURAL supports on-the-fly execution of spiking QKFormer by embedding its operations within the baseline computing flow without requiring dedicated hardware units. It also integrates a novel window-to-time-to-first-spike (W2TTFS) mechanism to replace average pooling and enable full-spike execution. Furthermore, we introduce a knowledge distillation (KD)-based training framework to construct single-timestep SNN models with competitive accuracy. NEURAL is implemented on a Xilinx Virtex-7 FPGA and evaluated using ResNet-11, QKFResNet-11, and VGG-11. Experimental results demonstrate that, at the algorithm level, the VGG-11 model trained with KD improves accuracy by 3.20% on CIFAR-10 and 5.13% on CIFAR-100. At the architecture level, compared to existing SNN accelerators, NEURAL achieves a 50% reduction in resource utilization and a 1.97x improvement in energy efficiency.

cs.AR↗

arXiv2024

IMPACT:InMemory ComPuting Architecture Based on Y-FlAsh Technology for Coalesced Tsetlin Machine Inference

The increasing demand for processing large volumes of data for machine learning models has pushed data bandwidth requirements beyond the capability of traditional von Neumann architecture. In-memory computing (IMC) has recently emerged as a promising solution to address this gap by enabling distributed data storage and processing at the micro-architectural level, significantly reducing both latency and energy. In this paper, we present the IMPACT: InMemory ComPuting Architecture Based on Y-FlAsh Technology for Coalesced Tsetlin Machine Inference, underpinned on a cutting-edge memory device, Y-Flash, fabricated on a 180 nm CMOS process. Y-Flash devices have recently been demonstrated for digital and analog memory applications, offering high yield, non-volatility, and low power consumption. The IMPACT leverages the Y-Flash array to implement the inference of a novel machine learning algorithm: coalesced Tsetlin machine (CoTM) based on propositional logic. CoTM utilizes Tsetlin automata (TA) to create Boolean feature selections stochastically across parallel clauses. The IMPACT is organized into two computational crossbars for storing the TA and weights. Through validation on the MNIST dataset, IMPACT achieved 96.3% accuracy. The IMPACT demonstrated improvements in energy efficiency, e.g., 2.23X over CNN-based ReRAM, 2.46X over Neuromorphic using NOR-Flash, and 2.06X over DNN-based PCM, suited for modern ML inference applications.

cs.AR↗

arXiv2024

Resistive Memory for Computing and Security: Algorithms, Architectures, and Platforms

Resistive random-access memory (RRAM) is gaining popularity due to its ability to offer computing within the memory and its non-volatile nature. The unique properties of RRAM, such as binary switching, multi-state switching, and device variations, can be leveraged to design novel techniques and algorithms. This thesis proposes a technique for utilizing RRAM devices in three major directions: i) digital logic implementation, ii) multi-valued computing, and iii) hardware security primitive design. We proposed new algorithms and architectures and conducted \textit{experimental studies} on each implementation. Moreover, we developed the electronic design automation framework and hardware platforms to facilitate these experiments.

cs.ET↗

arXiv2024

In-Memory Mirroring: Cloning Without Reading

In-memory computing (IMC) has gained significant attention recently as it attempts to reduce the impact of memory bottlenecks. Numerous schemes for digital IMC are presented in the literature, focusing on logic operations. Often, an application's description has data dependencies that must be resolved. Contemporary IMC architectures perform read followed by write operations for this purpose, which results in performance and energy penalties. To solve this fundamental problem, this paper presents in-memory mirroring (IMM). IMM eliminates the need for read and write-back steps, thus avoiding energy and performance penalties. Instead, we perform data movement within memory, involving row-wise and column-wise data transfers. Additionally, the IMM scheme enables parallel cloning of entire row (word) with a complexity of $\mathcal{O}(1)$. Moreover, our analysis of the energy consumption of the proposed technique using resistive random-access memory crossbar and experimentally validated JART VCM v1b model. The IMM increases energy efficiency and shows 2$\times$ performance improvement compared to conventional data movement methods.

cs.ET↗

arXiv2024

Error Detection and Correction Codes for Safe In-Memory Computations

In-Memory Computing (IMC) introduces a new paradigm of computation that offers high efficiency in terms of latency and power consumption for AI accelerators. However, the non-idealities and defects of emerging technologies used in advanced IMC can severely degrade the accuracy of inferred Neural Networks (NN) and lead to malfunctions in safety-critical applications. In this paper, we investigate an architectural-level mitigation technique based on the coordinated action of multiple checksum codes, to detect and correct errors at run-time. This implementation demonstrates higher efficiency in recovering accuracy across different AI algorithms and technologies compared to more traditional methods such as Triple Modular Redundancy (TMR). The results show that several configurations of our implementation recover more than 91% of the original accuracy with less than half of the area required by TMR and less than 40% of latency overhead.

cs.AR↗

arXiv2024

QTFlow: Quantitative Timing-Sensitive Information Flow for Security-Aware Hardware Design on RTL

In contemporary Electronic Design Automation (EDA) tools, security often takes a backseat to the primary goals of power, performance, and area optimization. Commonly, the security analysis is conducted by hand, leading to vulnerabilities in the design remaining unnoticed. Security-aware EDA tools assist the designer in the identification and removal of security threats while keeping performance and area in mind. Cutting-edge methods employ information flow analysis to identify inadvertent information leaks in design structures. Current information leakage detection methods use quantitative information flow analysis to quantify the leaks. However, handling sequential circuits poses challenges for state-of-the-art techniques due to their time-agnostic nature, overlooking timing channels, and introducing false positives. To address this, we introduce QTFlow, a timing-sensitive framework for quantifying hardware information leakages during the design phase. Illustrating its effectiveness on open-source benchmarks, QTFlow autonomously identifies timing channels and diminishes all false positives arising from time-agnostic analysis when contrasted with current state-of-the-art techniques.

cs.CR↗

arXiv2023

Experimental Validation of Memristor-Aided Logic Using 1T1R TaOx RRAM Crossbar Array

Memristor-aided logic (MAGIC) design style holds a high promise for realizing digital logic-in-memory functionality. The ability to implement a specific gate in a MAGIC design style hinges on the SET-to-RESET threshold ratio. The TaOx memristive devices exhibit distinct SET-to-RESET ratios, enabling the implementation of OR and NOT operations. As the adoption of the MAGIC design style gains momentum, it becomes crucial to understand the breakdown of energy consumption in the various phases of its operation. This paper presents experimental demonstrations of the OR and NOT gates on a 1T1R crossbar array. Additionally, it provides insights into the energy distribution for performing these operations at different stages. Through our experiments across different gates, we found that the energy consumption is dominated by initialization in the MAGIC design style. The energy split-up is 14.8%, 85%, and 0.2% for execution, initialization, and read operations respectively.

cs.ET↗

arXiv2023

MemSPICE: Automated Simulation and Energy Estimation Framework for MAGIC-Based Logic-in-Memory

Existing logic-in-memory (LiM) research is limited to generating mappings and micro-operations. In this paper, we present~\emph{MemSPICE}, a novel framework that addresses this gap by automatically generating both the netlist and testbench needed to evaluate the LiM on a memristive crossbar. MemSPICE goes beyond conventional approaches by providing energy estimation scripts to calculate the precise energy consumption of the testbench at the SPICE level. We propose an automated framework that utilizes the mapping obtained from the SIMPLER tool to perform accurate energy estimation through SPICE simulations. To the best of our knowledge, no existing framework is capable of generating a SPICE netlist from a hardware description language. By offering a comprehensive solution for SPICE-based netlist generation, testbench creation, and accurate energy estimation, MemSPICE empowers researchers and engineers working on memristor-based LiM to enhance their understanding and optimization of energy usage in these systems. Finally, we tested the circuits from the ISCAS'85 benchmark on MemSPICE and conducted a detailed energy analysis.

cs.ET↗

arXiv2023

SoftFlow: Automated HW-SW Confidentiality Verification for Embedded Processors

Despite its ever-increasing impact, security is not considered as a design objective in commercial electronic design automation (EDA) tools. This results in vulnerabilities being overlooked during the software-hardware design process. Specifically, vulnerabilities that allow leakage of sensitive data might stay unnoticed by standard testing, as the leakage itself might not result in evident functional changes. Therefore, EDA tools are needed to elaborate the confidentiality of sensitive data during the design process. However, state-of-the-art implementations either solely consider the hardware or restrict the expressiveness of the security properties that must be proven. Consequently, more proficient tools are required to assist in the software and hardware design. To address this issue, we propose SoftFlow, an EDA tool that allows determining whether a given software exploits existing leakage paths in hardware. Based on our analysis, the leakage paths can be retained if proven not to be exploited by software. This is desirable if the removal significantly impacts the design's performance or functionality, or if the path cannot be removed as the chip is already manufactured. We demonstrate the feasibility of SoftFlow by identifying vulnerabilities in OpenSSL cryptographic C programs, and redesigning them to avoid leakage of cryptographic keys in a RISC-V architecture.

cs.CR↗

arXiv2023

Should We Even Optimize for Execution Energy? Rethinking Mapping for MAGIC Design Style

Memristor-based logic-in-memory (LiM) has become popular as a means to overcome the von Neumann bottleneck in traditional data-intensive computing. Recently, the memristor-aided logic (MAGIC) design style has gained immense traction for LiM due to its simplicity. However, understanding the energy distribution during the design of logic operations within the memristive memory is crucial in assessing such an implementation's significance. The current energy estimation methods rely on coarse-grained techniques, which underestimate the energy consumption of MAGIC-styled operations performed on a memristor crossbar. To address this issue, we analyze the energy breakdown in MAGIC operations and propose a solution that utilizes mapping from the SIMPLER MAGIC tool to achieve accurate energy estimation through SPICE simulations. In contrast to existing research that primarily focuses on optimizing execution energy, our findings reveal that the memristor's initialization energy in the MAGIC design style is, on average, 68x higher. We demonstrate that this initialization energy significantly dominates the overall energy consumption. By highlighting this aspect, we aim to redirect the attention of designers towards developing algorithms and strategies that prioritize optimizations in initializations rather than execution for more effective energy savings.

cs.ET↗

arXiv2023

IMBUE: In-Memory Boolean-to-CUrrent Inference ArchitecturE for Tsetlin Machines

In-memory computing for Machine Learning (ML) applications remedies the von Neumann bottlenecks by organizing computation to exploit parallelism and locality. Non-volatile memory devices such as Resistive RAM (ReRAM) offer integrated switching and storage capabilities showing promising performance for ML applications. However, ReRAM devices have design challenges, such as non-linear digital-analog conversion and circuit overheads. This paper proposes an In-Memory Boolean-to-Current Inference Architecture (IMBUE) that uses ReRAM-transistor cells to eliminate the need for such conversions. IMBUE processes Boolean feature inputs expressed as digital voltages and generates parallel current paths based on resistive memory states. The proportional column current is then translated back to the Boolean domain for further digital processing. The IMBUE architecture is inspired by the Tsetlin Machine (TM), an emerging ML algorithm based on intrinsically Boolean logic. The IMBUE architecture demonstrates significant performance improvements over binarized convolutional neural networks and digital TM in-memory implementations, achieving up to a 12.99x and 5.28x increase, respectively.

cs.AR↗

arXiv2023

Integrated Architecture for Neural Networks and Security Primitives using RRAM Crossbar

This paper proposes an architecture that integrates neural networks (NNs) and hardware security modules using a single resistive random access memory (RRAM) crossbar. The proposed architecture enables using a single crossbar to implement NN, true random number generator (TRNG), and physical unclonable function (PUF) applications while exploiting the multi-state storage characteristic of the RRAM crossbar for the vector-matrix multiplication operation required for the implementation of NN. The TRNG is implemented by utilizing the crossbar's variation in device switching thresholds to generate random bits. The PUF is implemented using the same crossbar initialized as an entropy source for the TRNG. Additionally, the weights locking concept is introduced to enhance the security of NNs by preventing unauthorized access to the NN weights. The proposed architecture provides flexibility to configure the RRAM device in multiple modes to suit different applications. It shows promise in achieving a more efficient and compact design for the hardware implementation of NNs and security primitives.

cs.ET↗

arXiv2023

Finite State Automata Design using 1T1R ReRAM Crossbar

Data movement costs constitute a significant bottleneck in modern machine learning (ML) systems. When combined with the computational complexity of algorithms, such as neural networks, designing hardware accelerators with low energy footprint remains challenging. Finite state automata (FSA) constitute a type of computation model used as a low-complexity learning unit in ML systems. The implementation of FSA consists of a number of memory states. However, FSA can be in one of the states at a given time. It switches to another state based on the present state and input to the FSA. Due to its natural synergy with memory, it is a promising candidate for in-memory computing for reduced data movement costs. This work focuses on a novel FSA implementation using resistive RAM (ReRAM) for state storage in series with a CMOS transistor for biasing controls. We propose using multi-level ReRAM technology capable of transitioning between states depending on bias pulse amplitude and duration. We use an asynchronous control circuit for writing each ReRAM-transistor cell for the on-demand switching of the FSA. We investigate the impact of the device-to-device and cycle-to-cycle variations on the cell and show that FSA transitions can be seamlessly achieved without degradation of performance. Through extensive experimental evaluation, we demonstrate the implementation of FSA on 1T1R ReRAM crossbar.

cs.ET↗

arXiv2023

Gate Camouflaging Using Reconfigurable ISFET-Based Threshold Voltage Defined Logic

Most chip designers outsource the manufacturing of their integrated circuits (ICs) to external foundries due to the exorbitant cost and complexity of the process. This involvement of untrustworthy, external entities opens the door to major security threats, such as reverse engineering (RE). RE can reveal the physical structure and functionality of intellectual property (IP) and ICs, leading to IP theft, counterfeiting, and other misuses. The concept of the threshold voltage-defined (TVD) logic family is a potential mechanism to obfuscate and protect the design and prevent RE. However, it addresses post-fabrication RE issues, and it has been shown that dopant profiling techniques can be used to determine the threshold voltage of the transistor and break the obfuscation. In this work, we propose a novel TVD modulation with ion-sensitive field-effect transistors (ISFETs) to protect the IC from RE and IP piracy. Compared to the conventional TVD logic family, ISFET-TVD allows post-manufacture programming. The ISFET-TVD logic gate can be reconfigured after fabrication, maintaining an exact schematic architecture with an identical layout for all types of logic gates, and thus overcoming the shortcomings of the classic TVD. The threshold voltage of the ISFETs can be adjusted after fabrication by changing the ion concentration of the material in contact with the ion-sensitive gate of the transistor, depending on the Boolean functionality. The ISFET is CMOS compatible, and therefore implemented on 45 nm CMOS technology for demonstration.

cs.ET↗

arXiv2022

Hardware Security Primitives using Passive RRAM Crossbar Array: Novel TRNG and PUF Designs

With rapid advancements in electronic gadgets, the security and privacy aspects of these devices are significant. For the design of secure systems, physical unclonable function (PUF) and true random number generator (TRNG) are critical hardware security primitives for security applications. This paper proposes novel implementations of PUF and TRNGs on the RRAM crossbar structure. Firstly, two techniques to implement the TRNG in the RRAM crossbar are presented based on write-back and 50% switching probability pulse. The randomness of the proposed TRNGs is evaluated using the NIST test suite. Next, an architecture to implement the PUF in the RRAM crossbar is presented. The initial entropy source for the PUF is used from TRNGs, and challenge-response pairs (CRPs) are collected. The proposed PUF exploits the device variations and sneak-path current to produce unique CRPs. We demonstrate, through extensive experiments, reliability of 100%, uniqueness of 47.78%, uniformity of 49.79%, and bit-aliasing of 48.57% without any post-processing techniques. Finally, the design is compared with the literature to evaluate its implementation efficiency, which is clearly found to be superior to the state-of-the-art.

cs.CR↗

arXiv2022

A Temperature Independent Readout Circuit for ISFET-Based Sensor Applications

The ion-sensitive field-effect transistor (ISFET) is an emerging technology that has received much attention in numerous research areas, including biochemistry, medicine, and security applications. However, compared to other types of sensors, the complexity of ISFETs make it more challenging to achieve a sensitive, fast and repeatable response. Therefore, various readout circuits have been developed to improve the performance of ISFETs, especially to eliminate the temperature effect. This paper presents a new approach for a temperature-independent readout circuit that uses the threshold voltage differences of an ISFET-MOSFET pair. The Linear Technology Simulation Program with Integrated Circuit Emphasis (LTspice) is used to analyze the ISFET performance based on the proposed readout circuit characteristics. A macro-model is used to model ISFET behavior, including the first-level Spice model for the MOSFET part and Verilog-A to model the surface potential, reference electrode, and electrolyte of the ISFET to determine the relationships between variables.In this way, the behavior of the ISFET is monitored by the output voltage of the readout circuit based on a change in the electrolyte's hydrogen potential (pH), determined by the simulation. The proposed readout circuit has a temperature coefficient of 11.9 $ppm/{\deg}C$ for a temperature range of 0-100 ${\deg}C$ and pH between 1 and 13. The proposed ISFET readout circuit outperforms other designs in terms of simplicity and not requiring an additional sensor.

eess.SY↗

arXiv2022

PA-PUF: A Novel Priority Arbiter PUF

This paper proposes a 3-input arbiter-based novel physically unclonable function (PUF) design. Firstly, a 3-input priority arbiter is designed using a simple arbiter, two multiplexers (2:1), and an XOR logic gate. The priority arbiter has an equal probability of 0's and 1's at the output, which results in excellent uniformity (49.45%) while retrieving the PUF response. Secondly, a new PUF design based on priority arbiter PUF (PA-PUF) is presented. The PA-PUF design is evaluated for uniqueness, non-linearity, and uniformity against the standard tests. The proposed PA-PUF design is configurable in challenge-response pairs through an arbitrary number of feed-forward priority arbiters introduced to the design. We demonstrate, through extensive experiments, reliability of 100% after performing the error correction techniques and uniqueness of 49.63%. Finally, the design is compared with the literature to evaluate its implementation efficiency, where it is clearly found to be superior compared to the state-of-the-art.

cs.CR↗