arXiv subjects

Federica Coppari

Publications and source records attributed to Federica Coppari.

8 recordsLinked to original sources

arXiv2026

Data analysis methods for powder x-ray diffraction intensity under laser-driven dynamic compression at Omega and NIF laser facilities

Powder x-ray diffraction (PXRD) under laser-driven dynamic compression is a powerful tool to investigate material response to extreme pressure, temperature and strain rates. Robust PXRD platforms have been developed at kJ and MJ laser facilities worldwide including the Powder X-Ray Diffraction Image Plate (PXRDIP) at the Omega Laser Facility at the Laboratory for Laser Energetics (LLE) and the TARget Diffraction In Situ (TARDIS) at the National Ignition Facility (NIF). Here we present further developments of data analysis methods focused towards improving the fidelity of the PXRD intensity determination for these platforms. We illustrate these methods by discussing how they can be implemented in a data analysis package and applied to shock compression data on diamond near 1 TPa. We discuss using the XRD signal from the collimating pinhole or a layer of un-compressed material in the sample package as \textit{ in-situ} references for XRD intensity. We detail how to compare data collected with different x-ray sources and how to account for thermal damping of XRD signal when comparing XRD from a shock-compressed, hot material with the reference material at ambient.

cond-mat.mtrl-sci↗

arXiv2025

Roadmap for warm dense matter physics

This roadmap presents the state-of-the-art, current challenges and near future developments anticipated in the thriving field of warm dense matter physics. Originating from strongly coupled plasma physics, high pressure physics and high energy density science, the warm dense matter physics community has recently taken a giant leap forward. This is due to spectacular developments in laser technology, diagnostic capabilities, and computer simulation techniques. Only in the last decade has it become possible to perform accurate enough simulations \& experiments to truly verify theoretical results as well as to reliably design experiments based on predictions. Consequently, this roadmap discusses recent developments and contemporary challenges that are faced by theoretical methods, and experimental techniques needed to create and diagnose warm dense matter. A large part of this roadmap is dedicated to specific warm dense matter systems and applications in astrophysics, inertial confinement fusion and novel material synthesis.

physics.plasm-ph↗

arXiv2023

A structural study of hcp and liquid iron under shock compression up to 275 GPa

We combine nanosecond laser shock compression with \emph{in-situ} picosecond X-ray diffraction to provide structural data on iron up to 275 GPa. We constrain the extent of hcp-liquid coexistence, the onset of total melt, and the structure within the liquid phase. Our results indicate that iron, under shock compression, melts completely by 258(8) GPa. A coordination number analysis indicates that iron is a simple liquid at these pressure-temperature conditions. We also perform texture analysis between the ambient body-centered-cubic (bcc) $α$, and the hexagonal-closed-packed (hcp) high-pressure $ε-$phase. We rule out the Rong-Dunlop orientation relationship (OR) between the $α$ and $ε-$phases. However, we cannot distinguish between three other closely related ORs: Burger's, Mao-Bassett-Takahashi, and Potter's OR. The solid-liquid coexistence region is constrained from a melt onset pressure of 225(3) GPa from previously published sound speed measurements and full melt (246.5(1.8)-258(8) GPa) from X-ray diffraction measurements, with an associated maximum latent heat of melting of 623 J/g. This value is lower than recently reported theoretical estimates and suggests that the contribution to the earth's geodynamo energy budget from heat release due to freezing of the inner core is smaller than previously thought. Melt pressures for these nanosecond shock experiments are consistent with gas gun shock experiments that last for microseconds, indicating that the melt transition occurs rapidly.

cond-mat.mtrl-sci↗

arXiv2022

Same and interconvertible high-pressure ice phases

Most experimentally known high-pressure ice phases have a body-centred cubic (bcc) oxygen lattice. Our atomistic simulations show that, amongst these bcc ice phases, ices VII, VII' and X are the same thermodynamic phase under different conditions, whereas superionic ice VII'' has a first-order phase boundary with ice VII'. Moreover, at about 300 GPa, ice X transforms into the Pbcm phase with a sharp structural change but no apparent activation barrier, whilst at higher pressures the barrier gradually increases. Our study thus clarifies the phase behaviour of the high-pressure insulating ices and reveals peculiar solid-solid transition mechanisms not known in other systems.

cond-mat.mtrl-sci↗

arXiv2022

Development of slurry targets for high repetition-rate XFEL experiments

Combining an x-ray free electron laser (XFEL) with high power laser drivers enables the study of phase transitions, equation-of-state, grain growth, strength, and transformation pathways as a function of pressure to 100s GPa along different thermodynamic compression paths. Future high-repetition rate laser operation will enable data to be accumulated at >1 Hz which poses a number of experimental challenges including the need to rapidly replenish the target. Here, we present a combined shock-compression and X-ray diffraction study on vol% epoxy(50)-crystalline grains(50) (slurry) targets, which can be fashioned into extruded ribbons for high repetition-rate operation. For shock-loaded NaCl-slurry samples, we observe pressure, density and temperature states within the embedded NaCl grains consistent with observations for shock-compressed single-crystal NaCl.

hep-ex↗

arXiv2021

Quantitative analysis of diffraction by liquids using a pink-spectrum X-ray source

We describes a new approach for performing quantitative structure-factor analysis and density measurements of liquids using x-ray diffraction with a pink-spectrum x-ray source. The methodology corrects for the pink beam effect by performing a Taylor series expansion of the diffraction signal. The mean density, background scale factor, peak x-ray energy about which the expansion is performed, and the cutoff radius for density measurement are estimated using the derivative-free optimization scheme. The formalism is demonstrated for a simulated radial distribution function for tin. Finally, the proposed methodology is applied to experimental data on shock compressed tin recorded at the Dynamic Compression Sector at the Advanced Photon Source, with derived densities comparing favorably to other experimental results and the equations of state of tin.

physics.app-ph↗

arXiv2019

Equation of state of warm-dense boron nitride combining computation, modeling, and experiment

The equation of state (EOS) of materials at warm dense conditions poses significant challenges to both theory and experiment. We report a combined computational, modeling, and experimental investigation leveraging new theoretical and experimental capabilities to investigate warm-dense boron nitride (BN). The simulation methodologies include path integral Monte Carlo (PIMC), several density functional theory (DFT) molecular dynamics methods [plane-wave pseudopotential, Fermi operator expansion (FOE), and spectral quadrature (SQ)], activity expansion (ACTEX), and all-electron Green's function Korringa-Kohn-Rostoker (MECCA), and compute the pressure and internal energy of BN over a broad range of densities ($ρ$) and temperatures ($T$). Our experiments were conducted at the Omega laser facility and measured the Hugoniot of BN to unprecedented pressures (12--30 Mbar). The EOSs computed using different methods cross validate one another, and the experimental Hugoniot are in good agreement with our theoretical predictions. We assess that the largest discrepancies between theoretical predictions are $<$4% in pressure and $<$3% in energy and occur at $10^6$ K. We find remarkable consistency between the EOS from DFT calculations performed on different platforms and using different exchange-correlation functionals and those from PIMC using free-particle nodes. This provides strong evidence for the accuracy of both PIMC and DFT in the warm-dense regime. Moreover, SQ and FOE data have significantly smaller error bars than PIMC, and so represent significant advances for efficient computation at high $T$. We also construct tabular EOS models and clarify the ionic and electronic structure of BN over a broad $T-ρ$ range and quantify their roles in the EOS. The tabular models may be utilized for future simulations of laser-driven experiments that include BN as a candidate ablator material.

physics.chem-ph↗

arXiv2015

Analysis of laser shock experiments on precompressed samples using a quartz reference and application to warm dense hydrogen and helium

Megabar (1 Mbar = 100 GPa) laser shocks on precompressed samples allow reaching unprecedented high densities and moderately high 10000-100000K temperatures. We describe here a complete analysis framework for the velocimetry (VISAR) and pyrometry (SOP) data produced in these experiments. Since the precompression increases the initial density of both the sample of interest and the quartz reference for pressure-density, reflectivity and temperature measurements, we describe analytical corrections based on available experimental data on warm dense silica and density-functional-theory based molecular dynamics computer simulations. Using our improved analysis framework we report a re-analysis of previously published data on warm dense hydrogen and helium, compare the newly inferred pressure, density and temperature data with most advanced equation of state models and provide updated reflectivity values.

physics.plasm-ph↗