arXiv subjects

Federica Villa

Publications and source records attributed to Federica Villa.

17 recordsLinked to original sources

arXiv2026

An Algorithm for On-Sensor Agnostic Detection of Changes in Human Activity for Ultra-Low-Power Applications

Wearable devices running Human Activity Recognition(HAR) on Inertial Measurement Units~(IMUs) waste energy by performing continuous classification for each window, even during long periods of unchanged activity. We address this with a lightweight change-detection gate: a non-parametric algorithm based on dynamic template matching that runs continuously at only approximately 16kFLOPs per step, requires no offline training, and does not need prior definition of target activity classes. The gate invokes the full HAR network only when it detects an activity change, reducing the computational load by over 67% in realistic monitoring settings. The algorithm is evaluated on smart glasses, smartwatch, and smartphone data, requiring only a brief device-specific calibration phase. The gate achieves 98% sensitivity on UCA-EHAR, ensuring no genuine activity transition is missed, while 75% specificity keeps unnecessary HAR invocations low. Results on WISDM are 97% sensitivity and 76% specificity, demonstrating robustness and flexibility to various settings.

eess.SP↗

arXiv2025

On-Sensor Convolutional Neural Networks with Early-Exits

Tiny Machine Learning (TinyML) is a novel research field aiming at integrating Machine Learning (ML) within embedded devices with limited memory, computation, and energy. Recently, a new branch of TinyML has emerged, focusing on integrating ML directly into the sensors to further reduce the power consumption of embedded devices. Interestingly, despite their state-of-the-art performance in many tasks, none of the current solutions in the literature aims to optimize the implementation of Convolutional Neural Networks (CNNs) operating directly into sensors. In this paper, we introduce for the first time in the literature the optimized design and implementation of Depth-First CNNs operating on the Intelligent Sensor Processing Unit (ISPU) within an Inertial Measurement Unit (IMU) by STMicroelectronics. Our approach partitions the CNN between the ISPU and the microcontroller (MCU) and employs an Early-Exit mechanism to stop the computations on the IMU when enough confidence about the results is achieved, hence significantly reducing power consumption. When using a NUCLEO-F411RE board, this solution achieved an average current consumption of 4.8 mA, marking an 11% reduction compared to the regular inference pipeline on the MCU, while having equal accuracy.

cs.LG↗

arXiv2025

Experimental Test of Nonlocality Limits from Relativistic Independence

Quantum correlations, like entanglement, represent the characteristic trait of quantum mechanics, and pose essential issues and challenges to the interpretation of this pillar of modern physics. Although quantum correlations are largely acknowledged as a major resource to achieve quantum advantage in many tasks of quantum technologies, their full quantitative description and the axiomatic basis underlying them are still under investigation. Previous works suggested that the origin of nonlocal correlations is grounded in principles capturing (from outside the quantum formalism) the essence of quantum uncertainty. In particular, the recently-introduced principle of Relativistic Independence gave rise to a new bound intertwining local and nonlocal correlations. Here we test such a bound by realizing together sequential and joint weak measurements on entangled photon pairs, allowing to simultaneously quantify both local and nonlocal correlations by measuring incompatible observables on the same quantum system without collapsing its state, a task typically forbidden in the traditional (projective) quantum measurement framework. Our results demonstrate the existence of a fundamental limit on the extent of quantum correlations, shedding light on the profound role of uncertainty in both enabling and balancing them.

quant-ph↗

arXiv2024

AI-Enabled sensor fusion of time of flight imaging and mmwave for concealed metal detection

In the field of detection and ranging, multiple complementary sensing modalities may be used to enrich the information obtained from a dynamic scene. One application of this sensor fusion is in public security and surveillance, whose efficacy and privacy protection measures must be continually evaluated. We present a novel deployment of sensor fusion for the discrete detection of concealed metal objects on persons whilst preserving their privacy. This is achieved by coupling off-the-shelf mmWave radar and depth camera technology with a novel neural network architecture that processes the radar signals using convolutional Long Short-term Memory (LSTM) blocks and the depth signal, using convolutional operations. The combined latent features are then magnified using a deep feature magnification to learn cross-modality dependencies in the data. We further propose a decoder, based on the feature extraction and embedding block, to learn an efficient upsampling of the latent space to learn the location of the concealed object in the spatial domain through radar feature guidance. We demonstrate the detection of presence and inference of 3D location of concealed metal objects with an accuracy of up to 95%, using a technique that is robust to multiple persons. This work provides a demonstration of the potential for cost effective and portable sensor fusion, with strong opportunities for further development.

eess.IV↗

arXiv2023

Multipass wide-field phase imager

Advances in optical imaging always look for an increase in sensitivity and resolution among other practicability aspects. Within the same scope, in this work we report a versatile interference contrast imaging technique, capable of sub-nm sample-thickness resolution, with a large field-ofview of several mm2. Sensitivity is increased through the use of a self-imaging non-resonant cavity, which causes photons to probe the sample in multiple rounds before being detected, where the configuration can be transmissive or reflective. Phase profiles can be resolved individually for each round thanks to a specially designed single-photon camera with time-of-flight capabilities and true pixels-off gating. Measurement noise is reduced by novel data processing combining the retrieved sample profiles from multiple rounds. Our protocol is specially useful under extremely low light conditions as require by biological or photo-sensitive samples. Results demonstrate more than a four-fold reduction in phase measurement noise, compared to single round imaging, and close valuesto the predicted sensitivity in case of the best possible cavity configuration, where all photons are maintained until n rounds. We also find a good agreement with the theoretical predictions for low number of rounds, where experimental imperfections would place a minor role. The absence of a laser or cavity lock-in mechanism makes the technique an easy to use inspection tool.

physics.optics↗

arXiv2023

Single-pair measurement of the Bell parameter

Bell inequalities are one of the cornerstones of quantum foundations, and fundamental tools for quantum technologies. Recently, the scientific community worldwide has put a lot of effort towards them, which culminated with loophole-free experiments. Nonetheless, none of the experimental tests so far was able to extract information on the full inequality from each entangled pair, since the wave function collapse forbids performing, on the same quantum state, all the measurements needed for evaluating the entire Bell parameter. We present here the first single-pair Bell inequality test, able to obtain a Bell parameter value for every entangled pair detected. This is made possible by exploiting sequential weak measurements, allowing to measure non-commuting observables in sequence on the same state, on each entangled particle. Such an approach not only grants unprecedented measurement capability, but also removes the need to choose between different measurement bases, intrinsically eliminating the freedom-of-choice loophole and stretching the concept of counterfactual-definiteness (since it allows measuring in the otherwise not-chosen bases). We also demonstrate how, after the Bell parameter measurement, the pair under test still presents a noteworthy amount of entanglement, providing evidence of the absence of (complete) wave function collapse and allowing to exploit this quantum resource for further protocols.

quant-ph↗

arXiv2023

Manipulating solid-state spin concentration through charge transport

Solid-state spin defects are attractive candidates for developing quantum sensors and simulators. The spin and charge degrees of freedom in large defect ensembles are a promising platform to explore complex many-body dynamics and the emergence of quantum hydrodynamics. However, many interesting properties can be revealed only upon changes in the density of defects, which instead is usually fixed in material systems. Increasing the interaction strength by creating denser defect ensembles also brings more decoherence. Ideally one would like to control the spin concentration at will, while keeping fixed decoherence effects. Here we show that by exploiting charge transport, we can take some first steps in this direction, while at the same time characterizing charge transport and its capture by defects. By exploiting the cycling process of ionization and recombination of NV centers in diamonds, we pump electrons from the valence band to the conduction band. These charges are then transported to modulate the spin concentration by changing the charge state of material defects. By developing a wide-field imaging setup integrated with a fast single photon detector array, we achieve a direct and efficient characterization of the charge redistribution process by measuring the complete spectrum of the spin bath with micrometer-scale spatial resolution. We demonstrate the concentration increase of the dominant spin defects by a factor of 2 while keeping the $T_2$ of the NV center, which also provides a potential experimental demonstration of the suppression of spin flip-flops via hyperfine interactions. Our work paves the way to studying many-body dynamics with temporally and spatially tunable interaction strengths in hybrid charge-spin systems.

quant-ph↗

arXiv2023

Fast wide-field quantum sensor based on solid-state spins integrated with a SPAD array

Achieving fast, sensitive, and parallel measurement of a large number of quantum particles is an essential task in building large-scale quantum platforms for different quantum information processing applications such as sensing, computation, simulation, and communication. Current quantum platforms in experimental atomic and optical physics based on CMOS sensors and CCD cameras are limited by either low sensitivity or slow operational speed. Here we integrate an array of single-photon avalanche diodes with solid-state spin defects in diamond to build a fast wide-field quantum sensor, achieving a frame rate up to 100~kHz. We present the design of the experimental setup to perform spatially resolved imaging of quantum systems. A few exemplary applications, including sensing DC and AC magnetic fields, temperature, strain, local spin density, and charge dynamics, are experimentally demonstrated using an NV ensemble diamond sample. The developed photon detection array is broadly applicable to other platforms such as atom arrays trapped in optical tweezers, optical lattices, donors in silicon, and rare earth ions in solids.

quant-ph↗

arXiv2022

Non-Line-of-Sight Tracking and Mapping with an Active Corner Camera

The ability to form non-line-of-sight (NLOS) images of changing scenes could be transformative in a variety of fields, including search and rescue, autonomous vehicle navigation, and reconnaissance. Most existing active NLOS methods illuminate the hidden scene using a pulsed laser directed at a relay surface and collect time-resolved measurements of returning light. The prevailing approaches include raster scanning of a rectangular grid on a vertical wall opposite the volume of interest to generate a collection of confocal measurements. These are inherently limited by the need for laser scanning. Methods that avoid laser scanning track the moving parts of the hidden scene as one or two point targets. In this work, based on more complete optical response modeling yet still without multiple illumination positions, we demonstrate accurate reconstructions of objects in motion and a 'map' of the stationary scenery behind them. The ability to count, localize, and characterize the sizes of hidden objects in motion, combined with mapping of the stationary hidden scene, could greatly improve indoor situational awareness in a variety of applications.

eess.IV↗

arXiv2021

DEIS: Dependability Engineering Innovation for Industrial CPS

The open and cooperative nature of Cyber-Physical Systems (CPS) poses new challenges in assuring dependability. The DEIS project (Dependability Engineering Innovation for automotive CPS. This project has received funding from the European Union's Horizon 2020 research and innovation programme under grant agreement No 732242, see http://www.deis-project.eu) addresses these challenges by developing technologies that form a science of dependable system integration. In the core of these technologies lies the concept of a Digital Dependability Identity (DDI) of a component or system. DDIs are modular, composable, and executable in the field facilitating (a) efficient synthesis of component and system dependability information over the supply chain and (b) effective evaluation of this information in-the-field for safe and secure composition of highly distributed and autonomous CPS. The paper outlines the DDI concept and opportunities for application in four industrial use cases.

cs.SE↗

arXiv2021

Protective Measurement -- a new quantum measurement paradigm: detailed description of the first realisation

We present a detailed description of the experiment realising for the first time a protective measurement, a novel measurement protocol which combines weak interactions with a ``protection mechanism'' preserving the measured state coherence during the whole measurement process. Furthermore, protective measurement allows finding the expectation value of an observable, i.e. an inherently statistical quantity, by measuring a single particle, without the need of any statistics. This peculiar property, in sharp contrast with the framework of traditional (projective) quantum measurement, might constitute a groundbreaking advance for several quantum technology related fields.

quant-ph↗

arXiv2020

Imaging entanglement correlations with a single-photon avalanche diode camera

Spatial correlations between two photons are the key resource in realising many quantum imaging schemes. Measurement of the bi-photon correlation map is typically performed using single-point scanning detectors or single-photon cameras based on CCD technology. However, both approaches are limited in speed due to the slow scanning and the low frame-rate of CCD-based cameras, resulting in data acquisition times on the order of many hours. Here we employ a high frame rate, single photon avalanche diode (SPAD) camera, to measure the spatial joint probability distribution of a bi-photon state produced by spontaneous parametric down-conversion, with statistics taken over $10^7$ frames acquired in just 140 seconds. We verified the presence of spatial entanglement between our photon pairs through the violation of an Einstein-Podolsky-Rosen criterion, with a confidence level of 227 sigmas. Our work demonstrates the potential of SPAD cameras in the rapid characterisation of photon correlations, leading the way towards quantum imaging in real-time.

quant-ph↗

arXiv2020

Spatial images from temporal data

Traditional paradigms for imaging rely on the use of a spatial structure, either in the detector (pixels arrays) or in the illumination (patterned light). Removal of the spatial structure in the detector or illumination, i.e., imaging with just a single-point sensor, would require solving a very strongly ill-posed inverse retrieval problem that to date has not been solved. Here, we demonstrate a data-driven approach in which full 3D information is obtained with just a single-point, single-photon avalanche diode that records the arrival time of photons reflected from a scene that is illuminated with short pulses of light. Imaging with single-point time-of-flight (temporal) data opens new routes in terms of speed, size, and functionality. As an example, we show how the training based on an optical time-of-flight camera enables a compact radio-frequency impulse radio detection and ranging transceiver to provide 3D images.

eess.IV↗

arXiv2020

SPAD-based asynchronous-readout array detectors for image-scanning microscopy

Fluorescence microscopy and derived techniques are continuously looking for photodetectors able to guarantee increased sensitivity, high spatial and temporal resolution and ease of integration into modern microscopy architectures. Recent advances in single photon avalanche diodes (SPADs) fabricated with industry-standard microelectronic processes allow the development of new detection systems tailored to address the requirements of advanced imaging techniques (such as image-scanning microscopy). To this aim, we present the complete design and characterization of two bidimensional SPAD arrays composed of 25 fully independent and asynchronously-operated pixels, both having fill-factor of about 50% and specifically designed for being integrated into existing laser scanning microscopes. We used two different microelectronics technologies to fabricate our detectors: the first technology exhibiting very low noise (roughly 200 dark counts per second at room temperature), and the second one showing enhanced detection efficiency (more than 60% at a wavelength of 500 nm). Starting from the silicon-level device structures and moving towards the in pixel and readout electronics description, we present performance assessments and comparisons between the two detectors. Images of a biological sample acquired after their integration into our custom image-scanning microscope finally demonstrate their exquisite on-field performance in terms of spatial resolution and contrast enhancement. We envisage that this work can trigger the development of a new class of SPAD-based detector arrays able to substitute the typical single-element sensor used in fluorescence laser scanning microscopy.

physics.ins-det↗

arXiv2017

Seeding Dispersal Modeling For Systems of Planar Microbial Biofilms

We propose a modeling approach to study how mature biofilms spread and colonize new surfaces by predicting the formation and growth of satellite colonies generated by dispersing biofilms. This model provides the basis for better understanding the fate and behavior of dispersal cells, phenomenon that cannot, as yet, be predicted from knowledge of the genome. The model results were promising as supported by the experimental results. The proposed approach allows for further improvements through more detailed sub-models for front propagation, seeding, availability and depletion of resources. The present study was a successful proof-of-concept in answering the following questions: Can we predict the colonization of new sites following biofilm dispersal? Can we generate patterns in space and time to shed light on seeding dispersal? That are fundamental issues for developing novel approaches to manipulate biofilm formation in industrial, environmental and medical applications.

physics.bio-ph↗

arXiv2017

Investigating the Effects of the Interaction Intensity in a Weak Measurement

Measurements are crucial in quantum mechanics, in fundamental research as well as in applicative fields like quantum metrology, quantum-enhanced measurements and other quantum technologies. In the recent years, weak-interaction-based protocols like Weak Measurements and Protective Measurements have been experimentally realized, showing peculiar features leading to surprising advantages in several different applications. In this work we analyze the validity range for such measurement protocols, that is, how the interaction strength affects the weak value extraction, by measuring different polarization weak values measured on heralded single photons. We show that, even in the weak interaction regime, the coupling intensity limits the range of weak values achievable, putting a threshold on the signal amplification effect exploited in many weak measurement based experiments.

quant-ph↗

arXiv2017

Anomalous Weak Values and the Violation of a Multiple-measurement Leggett-Garg Inequality

Quantum mechanics presents peculiar properties that, on the one hand, have been the subject of several theoretical and experimental studies about its very foundations and, on the other hand, provide tools for developing new technologies, the so-called quantum technologies. The nonclassicality pointed out by Leggett-Garg inequalities has represented, with Bell inequalities, one of the most investigated subject. In this letter we study the connection of Leggett-Garg inequalities with a new emerging field of quantum measurement, the weak values. In particular, we perform an experimental study of the four-time correlators Legget-Garg test, by exploiting single and sequential weak measurements performed on heralded single photons. We show violation of a four-parameters Leggett-Garg inequality in different experimental conditions, demonstrating an interesting connection between Leggett-Garg inequality violation and anomalous weak values.

quant-ph↗