arXiv subjects

Federico Bosia

Publications and source records attributed to Federico Bosia.

31 records · Page 2Linked to original sources

arXiv2018

Emergence of the interplay between hierarchy and contact splitting in biological adhesion highlighted through a hierarchical shear lag model

Contact unit size reduction is a widely studied mechanism as a means to improve adhesion in natural fibrillar systems, such as those observed in beetles or geckos. However, these animals also display complex structural features in the way the contact is subdivided in a hierarchical manner. Here, we study the influence of hierarchical fibrillar architectures on the load distribution over the contact elements of the adhesive system, and the corresponding delamination behaviour. We present an analytical model to derive the load distribution in a fibrillar system, including hierarchical splitting of contacts, i.e. a "hierarchical shear-lag" model that generalizes the well-known shear-lag model used in mechanics. The influence on the detachment process is investigated introducing a numerical procedure that allows the derivation of the maximum delamination force as a function of the considered geometry, including statistical variability of local adhesive energy. Our study suggests that contact splitting generates improved adhesion only in the ideal case of infinitely compliant contacts. In real cases, to produce efficient adhesive performance, contact splitting needs to be coupled with hierarchical architectures to counterbalance high load concentrations resulting from contact unit size reduction, generating multiple delamination fronts and helping to avoid detrimental non-uniform load distributions. We show that these results can be summarized in a generalized adhesion scaling scheme for hierarchical structures, proving the beneficial effect of multiple hierarchical levels. The model can thus be used to predict the adhesive performance of hierarchical adhesive structures, as well as the mechanical behaviour of composite materials with hierarchical reinforcements.

cond-mat.soft↗

arXiv2018

Accordion-like metamaterials with tunable ultra-wide low-frequency band gaps

We study lightweight, elastic metamaterials consisting of tensegrity-inspired prisms, which present wide, low-frequency band gaps. For their realization, we alternate tensegrity elements with solid discs in periodic arrangements that we call "accordion-like" meta-structures. We show through analytical calculations and numerical simulations that these structures are characterized by low-frequency band gaps with strong uniform wave attenuation due to the coupling of Bragg scattering and local resonance mechanisms. This coupling helps to overcome the inherent limit of a narrow band-gap width for conventional locally-resonant metamaterials and to extend the wave attenuation to wider frequency ranges. Moreover, the band gaps can be further increased, provided a minimum structural damping is present, and tuned to desired frequencies by changing the applied prestress levels in the tensegrity structure. Results are corroborated by parametric studies showing that the band-gap frequencies are preserved for wide variations of geometric and material structural properties.

physics.app-ph↗

arXiv2018

A 2-D Model for friction of complex anisotropic surfaces

The friction force observed at macroscale is the result of interactions at various lower length scales that are difficult to model in a combined manner. For this reason, simplified approaches are required, depending on the specific aspect to be investigated. In particular, the dimensionality of the system is often reduced, especially in models designed to provide a qualitative description of frictional properties of elastic materials, e.g. the spring-block model. In this paper, we implement for the first time a two dimensional extension of the spring-block model, applying it to structured surfaces and investigating by means of numerical simulations the frictional behaviour of a surface in the presence of features like cavities, pillars or complex anisotropic structures. We show how friction can be effectively tuned by appropriate design of such surface features.

cond-mat.mtrl-sci↗

arXiv2017

Labyrinthine acoustic metamaterials with space-coiling channels for low-frequency sound control

We numerically analyze the performance of labyrinthine acoustic metamaterials with internal channels folded along a Wunderlich space-filling curve to control low-frequency sound in air. In contrast to previous studies, we perform direct modeling of wave propagation through folded channels, not introducing effective theory assumptions. As a result, we reveal that metastructures with channels, which allow wave propagation in the opposite direction to incident waves, have different dynamics as compared to those for straight slits of equivalent length. The differences are attributed to activated tortuosity effects and result in 100% wave reflection at band gap frequencies. This total reflection phenomenon is found to be insensitive to thermo-viscous dissipation in air. For labyrinthine channels generated by iteration levels, one can achieve broadband total sound reflection by using a metamaterial monolayer and efficiently control the amount of absorbed wave energy by tuning the channel width. Thus, the work contributes to a better understanding of labyrinthine metamaterials with potential applications for reflection and filtering of low-frequency airborne sound.

physics.app-ph↗

arXiv2017

Tuning friction with composite hierarchical surfaces

Macroscopic friction coefficients observed in experiments are the result of various types of complex multiscale interactions between sliding surfaces. Therefore, there are several ways to modify them depending on the physical phenomena involved. Recently, it has been demonstrated that surface structure, e.g. artificial patterning, can be used to tune frictional properties. In this paper, we show how the global friction coefficients can also be manipulated using composite surfaces with varying roughness or stiffness values, i.e. by combining geometrical features with the modification of local friction coefficients or stiffnesses. We show that a remarkable reduction of static friction can be achieved by introducing hierarchical arrangements of varying local roughness values, or by introducing controlled material stiffness variations.

cond-mat.mtrl-sci↗

arXiv2017

Bio-inspired hierarchical dissipative metamaterials

Hierarchical structures with constituents over multiple length scales are found in various natural materials like bones, shells, spider silk and others, all of which display enhanced quasi-static mechanical properties, such as high specific strength, stiffness and toughness. At the same time, the role of hierarchy on the dynamic behaviour of metamaterials remains largely unexplored. This study assesses the effect of bio-inspired hierarchical organization as well as of viscoelasticity on the wave attenuation properties of continuous mechanical metamaterials. We consider single-phase metamaterials formed by self-similar unit cells with different hierarchical levels and types of hierarchy. Results highlight a number of advantages through the introduction of structural hierarchy. Band gaps relative to the corresponding non-hierarchical structures are mostly preserved, while additional "hierarchically-induced" band gaps appear. Additionally, the hierarchical configuration allows the tuning of the band gap frequencies of regular metamaterial to lower frequencies, with a simultaneous significant reduction of the global structural weight. We show that even small viscoelastic effects, not treated in the current literature, are essential in determining this behaviour. The approach we propose allows the addition of hierarchical elements to existing metamaterial configurations, with the corresponding improvement of the wave damping properties, thus providing indications for the design of structures for practical applications.

cond-mat.mtrl-sci↗

arXiv2017

Static and dynamic friction of hierarchical surfaces

Hierarchical structures are very common in Nature, but only recently have they been systematically studied in materials physics, in order to understand the specific effects they can have on the mechanical properties of various systems. Structural hierarchy provides a way to tune and optimize macroscopic mechanical properties starting from simple base constituents, and new materials are nowadays designed exploiting this possibility. This can be also true in the field of tribology. In this paper, we study the effect of hierarchical patterned surfaces on the static and dynamic friction coefficients of an elastic material. Our results are obtained by means of numerical simulations using a 1-D spring-block model, which has previously been used to investigate various aspects of friction. Despite the simplicity of the model, we highlight some possible mechanisms that explain how hierarchical structures can significantly modify the friction coefficients of a material, providing a means to achieve tunability.

cond-mat.mtrl-sci↗

arXiv2016

Proof of concept for an ultrasensitive meta-device to detect and localize nonlinear elastic sources

The appearance of nonlinear effects in elastic wave propagation is one of the most reliable and sensitive indicators of the onset of material damage. However, these effects are usually very small and can be detected only using cumbersome digital signal processing techniques. Here, we propose and experimentally validate an alternative approach, using the filtering and focusing properties of elastic metamaterials to naturally select the higher harmonics generated by nonlinear effects and to increase their signal-to noise ratios, enabling the realization of time-reversal procedures for nonlinear elastic source detection. The proposed device demonstrates its potential as an efficient, compact, portable, passive apparatus for nonlinear elastic wave sensing and damage detection.

physics.ins-det↗

arXiv2016

Spider-Web Inspired Mechanical Metamaterials

Spider silk is a remarkable example of bio-material with superior mechanical characteristics. Its multilevel structural organization of dragline and viscid silk leads to unusual and tunable properties, extensively studied from a quasi-static point of view. In this study, inspired by the Nephila spider orb web architecture, we propose a novel design for mechanical metamaterials based on its periodic repetition. We demonstrate that spider-web metamaterial structure plays an important role in the dynamic response and wave attenuation mechanisms. The capability of the resulting structure to inhibit elastic wave propagation in sub-wavelength frequency ranges is assessed and parametric studies are performed to derive optimal configurations and constituent mechanical properties. The results show promise for the design of innovative lightweight structures for tunable vibration damping and impact protection, or the protection of large scale infrastructure such as suspended bridges.

cond-mat.mtrl-sci↗

arXiv2015

Silk reinforced with graphene or carbon nanotubes spun by spiders

Here, we report the production of silk incorporating graphene and carbon nanotubes directly by spider spinning, after spraying spiders with the corresponding aqueous dispersions. We observe a significant increment of the mechanical properties with respect to the pristine silk, in terms of fracture strength, Young's and toughness moduli. We measure a fracture strength up to 5.4 GPa, a Young's modulus up to 47.8 GPa and a toughness modulus up to 2.1 GPa, or 1567 J/g, which, to the best of our knowledge, is the highest reported to date, even when compared to the current toughest knotted fibres. This approach could be extended to other animals and plants and could lead to a new class of bionic materials for ultimate applications.

cond-mat.mtrl-sci↗

arXiv2015

An analytical model for the mechanical deformation of locally graphitized diamond

We propose an analytical model to describe the mechanical deformation of single-crystal diamond following the local sub-superficial graphitization obtained by laser beams or MeV ion microbeam implantation. In this case, a local mass-density variation is generated at specific depths within the irradiated micrometric regions, which in turn leads to swelling effects and the development of corresponding mechanical stresses. Our model describes the constrained expansion of the locally damaged material and correctly predicts the surface deformation, as verified by comparing analytical results with experimental profilometry data and Finite Element simulations. The model can be adopted to easily evaluate the stress and strain fields in locally graphitized diamond in the design of microfabrication processes involving the use of focused ion/laser beams, for example to predict the potential formation of cracks, or to evaluate the influence of stress on the properties of opto mechanical devices.

cond-mat.mtrl-sci↗

arXiv2013

Direct measurement and modelling of internal strains in ion-implanted diamond

We present a phenomenological model and Finite Element simulations to describe the depth variation of mass density and strain of ion-implanted single-crystal diamond. Several experiments are employed to validate the approach: firstly, samples implanted with 180 keV B ions at relatively low fluences are characterized using high-resolution X-ray diffraction (HR-XRD); secondly, the mass density variation of a sample implanted with 500 keV He ions well above its amorphization threshold is characterized with Electron Energy Loss Spectroscopy (EELS). At high damage densities, the experimental depth profiles of strain and density display a saturation effect with increasing damage and a shift of the damage density peak towards greater depth values with respect to those predicted by TRIM simulations, which are well accounted for in the model presented here. The model is then further validated by comparing TEM-measured and simulated thickness values of a buried amorphous carbon layer formed at different depths by implantation of 500 keV He ions through a variable-thickness mask to simulate the simultaneous implantation of ions at different energies.

cond-mat.mtrl-sci↗

arXiv2012

Spectroscopic measurement of the refractive index of ion-implanted diamond

We present the results of variable-angle spectroscopic ellipsometry and transmittance measurements to determine the variation of the complex refractive index of ion implanted single-crystal diamond. An increase is found in both real and imaginary parts at increasing damage densities. The index depth variation is determined in the whole wavelength range between 250 and 1690 nm. The dependence from the vacancy density is evaluated, highlighting a deviation from linearity in the high-damage-density regime. A considerable increase (up to 5%) in the real part of the index is observed, attributed to an increase in polarizability, thus offering new microfabrication possibilities for waveguides and other photonic structures in diamond.

cond-mat.mtrl-sci↗