arXiv subjects

Federico Dettù

Publications and source records attributed to Federico Dettù.

6 recordsLinked to original sources

arXiv2025

Automatic dimensionality reduction of Twin-in-the-Loop Observers

Conventional vehicle dynamics estimation methods suffer from the drawback of employing independent, separately calibrated filtering modules for each variable. To address this limitation, a recent proposal introduces a unified Twin-in-the-Loop (TiL) Observer architecture. This architecture replaces the simplified control-oriented vehicle model with a full-fledged vehicle simulator (digital twin), and employs a real-time correction mechanism using a linear time-invariant output error law. Bayesian Optimization is utilized to tune the observer due to the simulator's black-box nature, leading to a high-dimensional optimization problem. This paper focuses on developing a procedure to reduce the observer's complexity by exploring both supervised and unsupervised learning approaches. The effectiveness of these strategies is validated for longitudinal and lateral vehicle dynamics using real-world data.

eess.SY↗

arXiv2023

Unraveling the Control Engineer's Craft with Neural Networks

Many industrial processes require suitable controllers to meet their performance requirements. More often, a sophisticated digital twin is available, which is a highly complex model that is a virtual representation of a given physical process, whose parameters may not be properly tuned to capture the variations in the physical process. In this paper, we present a sim2real, direct data-driven controller tuning approach, where the digital twin is used to generate input-output data and suitable controllers for several perturbations in its parameters. State-of-the art neural-network architectures are then used to learn the controller tuning rule that maps input-output data onto the controller parameters, based on artificially generated data from perturbed versions of the digital twin. In this way, as far as we are aware, we tackle for the first time the problem of re-calibrating the controller by meta-learning the tuning rule directly from data, thus practically replacing the control engineer with a machine learning model. The benefits of this methodology are illustrated via numerical simulations for several choices of neural-network architectures.

eess.SY↗

arXiv2023

Optimization tools for Twin-in-the-Loop vehicle control design: analysis and yaw-rate tracking case study

Given the urgent need of simplifying the end-of-line tuning of complex vehicle dynamics controllers, the Twin-in-the-Loop Control (TiL-C) approach was recently proposed in the automotive field. In TiL-C, a digital twin is run on-board to compute a nominal control action in run-time and an additional block C_delta is used to compensate for the mismatch between the simulator and the real vehicle. As the digital twin is assumed to be the best replica available of the real plant, the key issue in TiL-C becomes the tuning of the compensator, which must be performed relying on data only. In this paper, we investigate the use of different black-box optimization techniques for the calibration of C_delta. More specifically, we compare the originally proposed Bayesian Optimization (BO) approach with the recently developed Set Membership Global Optimization (SMGO) and Virtual Reference Feedback Tuning (VRFT), a one-shot direct data-driven design method. The analysis will be carried out within a professional multibody simulation environment on a novel TiL-C application case study -- the yaw-rate tracking problem -- so as to further prove the TiL-C effctiveness on a challenging problem. Simulations will show that the VRFT approach is capable of providing a well tuned controller after a single iteration, while 10 to 15 iterations are necessary for refining it with global optimizers. Also, SMGO is shown to significantly reduce the computational effort required by BO.

eess.SY↗

arXiv2023

Joint vehicle state and parameters estimation via Twin-in-the-Loop observers

Vehicular control systems are required to be both extremely reliable and robust to different environmental conditions, e.g. load or tire-road friction. In this paper, we extend a new paradigm for state estimation, called Twin-in-the-Loop filtering (TiL-F), to the estimation of the unknown parameters describing the vehicle operating conditions. In such an approach, a digital-twin of the vehicle (usually already available to the car manufacturer) is employed on-board as a plant replica within a closed-loop scheme, and the observer gains are tuned purely from experimental data. The proposed approach is validated against experimental data, showing to significantly outperform the state-of-the-art solutions.

eess.SY↗

arXiv2023

The Twin-in-the-Loop approach for vehicle dynamics control

In vehicle dynamics control, engineering a suitable regulator is a long and costly process. The starting point is usually the design of a nominal controller based on a simple control-oriented model and its testing on a full-fledged simulator. Then, many driving hours are required during the End-of-Line (EoL) tuning phase to calibrate the controller for the physical vehicle. Given the recent technological advances, in this paper we consider the pioneering perspective where the simulator can be run on-board in the electronic control unit, so as to calculate the nominal control action in real-time. In this way, it can be shown that, in the EoL phase, we only need to tune a simple compensator of the mismatch between the expected and the measured outputs. The resulting approach not only exploits the already available simulator and nominal controller and significantly simplifies the design process, but also outperforms the state-of-the-art in terms of tracking accuracy and robustness within a challenging active braking control case study.

eess.SY↗

arXiv2021

Exergy-based modeling framework for hybrid and electric ground vehicles

Exergy, or availability, is a thermodynamic concept representing the useful work that can be extracted from a system evolving from a given state to a reference state. It is also a system metric, formulated from the first and the second law of thermodynamics, encompassing the interactions between subsystems and the resulting entropy generation. In this paper, an exergy-based analysis for ground vehicles is proposed. The study, a first to the authors' knowledge, defines a comprehensive vehicle and powertrain-level modeling framework to quantify exergy transfer and destruction phenomena for the vehicle's longitudinal dynamics and its energy storage and conversion devices (namely, electrochemical energy storage, electric motor, and ICE). To show the capabilities of the proposed model in quantifying, locating, and ranking the sources of exergy losses, two case studies based on an electric vehicle and a parallel hybrid electric vehicle are analyzed considering a real-world driving cycle. This modeling framework can serve as a tool for the future development of ground vehicles management strategies aimed at minimizing exergy losses rather than fuel consumption.

eess.SY↗