arXiv subjects

Federico Paratore

Publications and source records attributed to Federico Paratore.

7 recordsLinked to original sources

arXiv2026

Label-free quantitative imaging of two-dimensional concentration gradients using Fabry-P\'erot interferometry

Concentration gradients at the microscale play a central role in many physical, chemical, and biological systems, yet their quantitative visualization remains challenging due to the limited optical contrast associated with changes in concentration. Here, we present RIO (the Refractive Index Observer), a label-free interferometric tool for quantitative imaging of refractive index, and thus concentration fields in microfluidic systems. Implemented using a Fabry-P\'{e}rot microfluidic chip mounted on a standard optical microscope, RIO achieves a per-pixel refractive index precision on the order of $1\times 10^{-5}$ refractive index units (RIU) using a standard CMOS camera, enabling high sensitivity two-dimensional chemical imaging. We Characterize the refractive index resolution and spatiotemporal performance of the instrument and demonstrate its capabilities by measuring concentration gradients of dissolved NaCl in a co-laminar flow. RIO provides an accessible, label-free platform for quantitative studies of microscale concentration fields in systems where molecular labeling is undesirable or impractical, and enables investigations of a broad range of out-of-equilibrium phenomena, from polymerization and enzymatic reactions to cell signaling and electrochemical processes.

physics.optics↗

arXiv2025

Density modulations in active colloidal systems through orthogonal propulsion control and sensory delays

Recent advancements in active colloidal systems aim to mimic key characteristics of biological microswimmers, particularly their adaptive motility in response to environmental changes. While many approaches rely on externally imposing a propulsive force, achieving true autonomous and self-regulating adaptation to the environment remains limited. In this study, we develop and analyze Janus microswimmers driven by electrohydrodynamic flows that autonomously adjust their propulsion dynamics in response to varying illumination conditions. Our Janus particles are silica colloids partially coated with titania, which self-propel via induced-charge electrophoresis (ICEP) under uniform AC electric fields. Since titania is photoconductive, it increases its conductivity under UV illumination, which thereby regulates the propulsion velocity independently of and orthogonally to the applied electric field. Crucially, the velocity adaptation requires a finite time. This sensory delay, which we systematically characterize, leads to enhanced microswimmer localization in response to spatiotemporal light modulations compared to the typical case of instantaneous response considered for synthetic microswimmers. By harnessing these dynamics, akin to those of biological microswimmers, we exert precise control over both local and global particle behavior, presenting novel opportunities for adaptive active matter systems.

cond-mat.soft↗

arXiv2023

Janus microswimmers are poor hydrodynamic mixers

The generation of fluid flows by autophoretic microswimmers has been proposed as a mechanism to enhance mass transport and mixing at the micro- and nanoscale. Here, we experimentally investigate the ability of model 2-D "active baths" of photocatalytic silica-titania Janus microspheres to enhance the diffusivity of tracer particles at different microswimmer densities below the onset of collective behaviour. Inspired by the similarities between our experimental findings and previous results for biological microorganisms, we then model our Janus microswimmers using a general squirmer framework, specifically treating them as neutral squirmers. The numerical simulations faithfully capture our observations, offer an insight into the microscopic mechanism underpinning tracer transport, and allow us to expand the parameter space beyond our experimental system. We find strong evidence that near-field interactions dominate enhancements in tracer diffusivity in active Janus baths, leading to the identification of an operating window for enhanced tracer transport by chemical microswimmers based on scaling arguments. Based on this argumentation, we suggest that for many chemically active colloidal systems, hydrodynamics alone is likely to be insufficient to induce appreciable mixing of passive components with large diffusion coefficients.

cond-mat.soft↗

arXiv2023

Gate Electrodes Enable Tunable Nanofluidic Particle Traps

The ability to control the location of nanoscale objects in liquids is essential for fundamental and applied research from nanofluidics to molecular biology. To overcome their random Brownian motion, the electrostatic fluidic trap creates local minima in potential energy by shaping electrostatic interactions with a tailored wall topography. However, this strategy is inherently static -- once fabricated the potential wells cannot be modulated. Here, we propose and experimentally demonstrate that such a trap can be controlled through a buried gate electrode.We measure changes in the average escape times of nanoparticles from the traps to quantify the induced modulations of $0.7k_\rm{B}T$ in potential energy and 50 mV in surface potential. Finally, we summarize the mechanism in a parameter-free predictive model, including surface chemistry and electrostatic fringing, that reproduces the experimental results. Our findings open a route towards real-time controllable nanoparticle traps.

cond-mat.soft↗

arXiv2022

Dynamic control of high-voltage actuator arrays by light-pattern projection on photoconductive switches

The ability to control high-voltage actuator arrays relies, to date, on expensive microelectronic processes or on individual wiring of each actuator to a single off-chip high-voltage switch. Here we present an alternative approach that uses on-chip photoconductive switches together with a light projection system to individually address high-voltage actuators. Each actuator is connected to one or more switches that are nominally OFF unless turned ON using direct light illumination. We selected hydrogenated amorphous silicon as our photoconductive material, and we provide complete characterization of its light to dark conductance, breakdown field, and spectral response. The resulting switches are very robust, and we provide full details of their fabrication processes. We demonstrate that the switches can be integrated in different architectures to support both AC and DC-driven actuators and provide engineering guidelines for their functional design. To demonstrate the versatility of our approach, we demonstrate the use of the photoconductive switches in two distinctly different applications control of micrometer-sized gate electrodes for patterning flow fields in a microfluidic chamber, and control of centimeter-sized electrostatic actuators for creating mechanical deformations for haptic displays.

physics.ins-det↗

arXiv2021

Shaping liquid films by dielectrophoresis

We present a theoretical model and experimental demonstration of thin liquid film deformations due to a dielectric force distribution established by surface electrodes. We model the spatial electric field produced by a pair of parallel electrodes and use it to evaluate the stress on the interface through Maxwell stresses. By coupling this force with the Young-Laplace equation, we obtain the deformation of the interface. To validate our theory, we design an experimental setup which uses microfabricated electrodes to achieve spatial dielectrophoretic actuation of a thin liquid film, while providing measurements of microscale deformations through digital holographic microscopy. We characterize the deformation as a function of the electrode-pair geometry and film thickness, showing very good agreement with the model. Based on the insights from the characterization of the system, we pattern conductive lines of electrode pairs on the surface of a microfluidic chamber and demonstrate the ability to produce complex two-dimensional deformations. The films can remain in liquid form and be dynamically modulated between different configurations or polymerized to create solid structures with high surface quality.

cond-mat.soft↗

arXiv2019

Electroosmotic flow dipole: experimental observation and flow field patterning

We experimentally demonstrate the phenomenon of electroosmotic dipole flow that occurs around a localized surface charge region under the application of an external electric field in a Hele-Shaw cell. We use localized deposition of polyelectrolytes to create well-controlled surface charge variations, and show that for a disk-shaped spot, the internal pressure distribution that arises, results in uniform flow within the spot and dipole flow around it. We further demonstrate the superposition of surface charge spots to create complex flow patterns, without the use of physical walls.

cond-mat.soft↗