arXiv subjects

Fedja Orucevic

Publications and source records attributed to Fedja Orucevic.

8 recordsLinked to original sources

arXiv2025

The magnetic inverse problem for two stacked layers of sources

We present calculations that reconstruct electronic current densities in two stacked layers at known depths, using magnetic field data. Solving this inverse problem requires knowledge of the magnetic field in two planes -- one above both current layers, one below -- corresponding to non-invasive measurements of the field. We corroborate the accuracy of current density reconstruction from the resulting system of equations using a numerical simulation. This method is anticipated to be applicable to non-destructive current imaging for quality assurance in a range of applications featuring two-layer geometries, including printed circuit boards, capacitors, fuel cells, and battery cells; we focus particularly here on battery cells, due to their rapidly increasing relevance for automotive applications. This method also offers a framework for generalising the model to more than two layers in future work.

math-ph↗

arXiv2023

Probing the Degree of Coherence through the Full 1D to 3D crossover

We experimentally study a gas of quantum degenerate $^{87}$Rb atoms throughout the full dimensional crossover, from a one-dimensional (1D) system exhibiting phase fluctuations consistent with 1D theory to a three-dimensional (3D) phase-coherent system, thereby smoothly interpolating between these distinct, well-understood regimes. Using a hybrid trapping architecture combining an atom chip with a printed circuit board, we continuously adjust the system's dimensionality over a wide range while measuring the phase fluctuations through the power spectrum of density ripples in time-of-flight expansion. Our measurements confirm that the chemical potential $μ$ controls the departure of the system from 3D and that the fluctuations are dependent on both $μ$ and the temperature $T$. Through a rigorous study we quantitatively observe how inside the crossover the dependence on $T$ gradually disappears as the system becomes 3D. Throughout the entire crossover the fluctuations are shown to be determined by the relative occupation of 1D axial collective excitations.

cond-mat.quant-gas↗

arXiv2021

A modular optically pumped magnetometer system

To address the demands in healthcare and industrial settings for spatially resolved magnetic imaging, we present a modular optically pumped magnetometer (OPM) system comprising a multi-sensor array of highly sensitive quantum magnetometers. This system is designed and built to facilitate fast prototyping and testing of new measurement schemes by enabling quick reconfiguration of the self-contained laser and sensor modules as well as allowing for the construction of various array layouts with a shared light source. The modularity of this system facilitates the development of methods for managing high-density arrays for magnetic imaging. The magnetometer sensitivity and bandwidth are first characterised in both individual channel and differential gradiometer configurations before testing in a real-world magnetoencephalography environment by measuring alpha rhythms from the brain of a human participant. We demonstrate the OPM system in a first-order axial gradiometer configuration with a magnetic field gradient sensitivity of 10 $\mathrm{fT/cm/\sqrt{Hz}}$. Bandwidths exceeding 200 Hz were achieved for two independent modules. The system's increased temporal resolution allows for the measurement of spinal cord signals, which we demonstrate by using phantom signal trials and comparing with an existing commercial sensor.

physics.atom-ph↗

arXiv2015

Novel laser machining of optical fibers for long cavities with low birefringence

We present a novel method of machining optical fiber surfaces with a CO${}_2$ laser for use in Fiber-based Fabry-Perot Cavities (FFPCs). Previously FFPCs were prone to large birefringence and limited to relatively short cavity lengths ($\le$ 200 $μ$m). These characteristics hinder their use in some applications such as cavity quantum electrodynamics with trapped ions. We optimized the laser machining process to produce large, uniform surface structures. This enables the cavities to achieve high finesse even for long cavity lengths. By rotating the fibers around their axis during the laser machining process the asymmetry resulting from the laser's transverse mode profile is eliminated. Consequently we are able to fabricate fiber mirrors with a high degree of rotational symmetry, leading to remarkably low birefringence. Through measurements of the cavity finesse over a range of cavity lengths and the polarization dependence of the cavity linewidth, we confirmed the quality of the produced fiber mirrors for use in low-birefringence FFPCs.

physics.optics↗

arXiv2011

Fiber-coupled single ion as an efficient quantum light source

We have realized a compact system to efficiently couple the fluorescent light emitted by a single trapped ion to two opposing optical fibers. The fibers are tightly integrated in the center electrodes of a miniature endcap trap. They capture light from the ion with a numerical aperture of 0.34 each, corresponding to 6% of the solid angle in total. The high collection efficiency and high signal-to-background ratio make the setup an ideal quantum light source. We have observed strong antibunching of the photons emitted from the two fibers. The system has a range of applications from single-ion state detection in quantum information processing to strong coupling cavity-QED with ions.

quant-ph↗

arXiv2009

Excitation mapping of whispering gallery modes in silica microcavities

We report the direct observation of the electromagnetic-field distribution of whispering?gallery modes in silica microcavities (spheres and toroids). It is revealed by their excitation efficiency with a tapered fiber coupler swept along the meridian. The originality of this method lies in the use of the coupler itself for the near field mapping, eliminating the need of additional tools used in previous work. This method is successfully applied to microspheres and microtoroids

quant-ph↗

arXiv2008

Neodymium Photoluminescence in Whispering Gallery Modes of Toroidal Microcavities

We report on light emission from high-Q neodymium-implanted silica microtoroids. Following the description of the fabrication process of microtoroids, neodymium light emission is analysed. This emission is coupled to various cavity modes. Using evanescent wave coupling we achieve selective detection of Whispering Gallery Modes of a microtoroid.

quant-ph↗

arXiv2008

Transmittance and near-field characterization of sub-wavelength tapered optical fibers

We have produced high transmission sub-wavelength tapered optical fibers for the purpose of whispering gallery mode coupling in fused silica microcavities at 780 nm. A detailed analysis of the fiber transmittance evolution during tapering is demonstrated to reflect precisely the mode coupling and cutoff in the fiber. This allows to control the final size, the number of guided modes and their effective index. These results are checked by evanescent wave mapping measurements on the resulting taper.

quant-ph↗