Searcharxiv⌕ Search

arXiv subjects

Fei Ding

Publications and source records attributed to Fei Ding.

At least 109 records · Page 6Linked to original sources
arXiv2019

Entanglement Swapping with Semiconductor-generated Photons

Transferring entangled states between photon pairs is essential for quantum communication technologies. Semiconductor quantum dots are the most promising candidate for generating polarization-entangled photons deterministically. Recent improvements in photonic quality and brightness now make them suited for complex quantum optical purposes in practical devices. Here we demonstrate for the first time swapping of entangled states between two pairs of photons emitted by a single quantum dot. A joint Bell measurement heralds the successful generation of the Bell state $Ψ^+$ with a fidelity of up to $0.81 \pm 0.04$. The state's nonlocal nature is confirmed by violating the CHSH-Bell inequality. Our photon source is compatible with atom-based quantum memories, enabling implementation of hybrid quantum repeaters. This experiment thus is a major step forward for semiconductor based quantum communication technologies.

quant-ph↗
arXiv2018

Direct characterization of near-field coupling in gap plasmon-based metasurfaces

Metasurfaces based on gap surface-plasmon resonators allow one to arbitrarily control the phase, amplitude and polarization of reflected light with high efficiency. However, the performance of densely-packed metasurfaces is reduced, often quite significantly, in comparison with simple analytical predictions. We argue that this reduction is mainly because of the near-field coupling between metasurface elements, which results in response from each element being different from the one anticipated by design simulations, which are commonly conducted for each individual element being placed in an artificial periodic arrangement. In order to study the influence of near-field coupling, we fabricate meta-elements of varying sizes arranged in quasi-periodic arrays so that the immediate environment of same size elements is different for those located in the middle and at the border of the arrays. We study the near-field using a phase-resolved scattering-type scanning near-field optical microscopy (s-SNOM) and conducting numerical simulations. By comparing the near-field maps from elements of the same size but different placements we evaluate the near-field coupling strength, which is found to be significant for large and densely packed elements. This technique is quite generic and can be used practically for any metasurface type in order to precisely measure the near-field response from each individual element and identify malfunctioning ones, providing feedback to their design and fabrication, thereby allowing one to improve the efficiency of the whole metasurface.

physics.optics↗
arXiv2018

Tuning emission energy and fine structure splitting in quantum dots emitting in the telecom O-band

We report on optical investigations of MOVPE-grown InGaAs/GaAs quantum dots emitting at the telecom O-band that were integrated onto uniaxial piezoelectric actuators. This promising technique, which does not degrade the optical quality or performances of the quantum emitters, enables us to tune the quantum dot emission wavelengths and their fine-structure splitting. By spectrally analyzing the emitted light with respect to its polarization, we are able to demonstrate the cancelation of the fine structure splitting within the experimental resolution limit. This work represents an important step towards the high-yield generation of entangled photon pairs at telecommunication wavelength, together with the capability to precisely tune the emission to target wavelengths.

cond-mat.mes-hall↗
arXiv2017

Frequency Feedback for Two-Photon Interference from Separate Quantum Dots

We employ active feedback to stabilize the frequency of single photons emitted by two separate quantum dots to an atomic standard. The transmission of a single, rubidium-based Faraday filter serves as the error signal for frequency stabilization to less than 1.5% of the emission linewidth. Long-term stability is demonstrated by Hong-Ou-Mandel interference between photons from the two quantum dots. The observed visibility of $V_{\mathrm{lock}}=(41 \pm 5)$% is limited only by internal dephasing of the dots. Our approach facilitates quantum networks with indistinguishable photons from distributed emitters.

quant-ph↗
arXiv2017

On-demand semiconductor source of 780 nm single photons with controlled temporal wave packets

We report on a fast, bandwidth-tunable single-photon source based on an epitaxial GaAs quantum dot. Exploiting spontaneous spin-flip Raman transitions, single photons at $780\,$nm are generated on-demand with tailored temporal profiles of durations exceeding the intrinsic quantum dot lifetime by up to three orders of magnitude. Second-order correlation measurements show a low multi-photon emission probability ($g^{2}(0)\sim\,0.10-0.15$) at a generation rate up to $10\,$MHz. We observe Raman photons with linewidths as low as $200\,$MHz, narrow compared to the $1.1\,$GHz linewidth measured in resonance fluorescence. The generation of such narrow-band single photons with controlled temporal shapes at the rubidium wavelength is a crucial step towards the development of an optimized hybrid semiconductor-atom interface.

quant-ph↗
arXiv2017

On-chip spectropolarimetry by fingerprinting with random surface arrays of nanoparticles

Optical metasurfaces revolutionized the approach to moulding the propagation of light by enabling simultaneous control of the light phase, momentum, amplitude and polarization. Thus, instantaneous spectropolarimetry became possible by conducting parallel intensity measurements of differently diffracted optical beams. Various implementations of this very important functionality have one feature in common - the determination of wavelength utilizes dispersion of the diffraction angle, requiring tracking the diffracted beams in space. Realization of on-chip spectropolarimetry calls thereby for conceptually different approaches. In this work, we demonstrate that random nanoparticle arrays on metal surfaces, enabling strong multiple scattering of surface plasmon polaritons (SPPs), produce upon illumination complicated SPP scattered patterns, whose angular spectra are uniquely determined by the polarization and wavelength of light, representing thereby spectropolarimetric fingerprints. Using um-sized circular arrays of randomly distributed μm-sized gold nanoparticles (density ~ 75 μm$^-$$^2$}) fabricated on gold films, we measure angular distributions of scattered SPP waves using the leakage radiation microscopy and find that the angular SPP spectra obtained for normally incident light beams different in wavelength and/or polarization are distinctly different. Our approach allows one to realize on-chip spectropolarimetry by fingerprinting using surface nanostructures fabricated with simple one-step electron-beam lithography.

physics.optics↗
arXiv2017

Gradient metasurfaces: a review of fundamentals and applications

In the wake of intense research on metamaterials the two-dimensional analogue, known as metasurfaces, has attracted progressively increasing attention in recent years due to the ease of fabrication and smaller insertion losses, while enabling an unprecedented control over spatial distributions of transmitted and reflected optical fields. Metasurfaces represent optically thin planar arrays of resonant subwavelength elements that can be arranged in a strictly or quasi periodic fashion, or even in an aperiodic manner, depending on targeted optical wavefronts to be molded with their help. This paper reviews a broad subclass of metasurfaces, viz. gradient metasurfaces, which are devised to exhibit spatially varying optical responses resulting in spatially varying amplitudes, phases and polarizations of scattered fields. Starting with introducing the concept of gradient metasurfaces, we present classification of different metasurfaces from the viewpoint of their responses, differentiating electrical-dipole, geometric, reflective and Huygens' metasurfaces. The fundamental building blocks essential for the realization of metasurfaces are then discussed in order to elucidate the underlying physics of various physical realizations of both plasmonic and purely dielectric metasurfaces. We then overview the main applications of gradient metasurfaces, including waveplates, flat lenses, spiral phase plates, broadband absorbers, color printing, holograms, polarimeters and surface wave couplers. The review is terminated with a short section on recently developed nonlinear metasurfaces, followed by the outlook presenting our view on possible future developments and perspectives for future applications.

physics.optics↗
arXiv2017

Beam-Size Invariant Spectropolarimeters Using Gap-Plasmon Metasurfaces

Metasurfaces enable exceptional control over the light with surface-confined planar components, offering the fascinating possibility of very dense integration and miniaturization in photonics. Here, we design, fabricate and experimentally demonstrate chip-size plasmonic spectropolarimeters for simultaneous polarization state and wavelength determination. Spectropolarimeters, consisting of three gap-plasmon phase-gradient metasurfaces that occupy 120° circular sectors each, diffract normally incident light to six predesigned directions, whose azimuthal angles are proportional to the light wavelength, while contrasts in the corresponding diffraction intensities provide a direct measure of the incident polarization state through retrieval of the associated Stokes parameters. The proof-of-concept 96-μm-diameter spectropolarimeter operating in the wavelength range of 750-950nm exhibits the expected polarization selectivity and high angular dispersion. Moreover, we show that, due to the circular-sector design, polarization analysis can be conducted for optical beams of different diameters without prior calibration, demonstrating thereby the beam-size invariant functionality. The proposed spectropolarimeters are compact, cost-effective, robust, and promise high-performance real-time polarization and spectral measurements.

physics.optics↗
arXiv2017

Ultra-Broadband Super-Planckian Radiative Heat Transfer with Artificial Continuum Cavity States in Patterned Hyperbolic Metamaterial

Localized cavity resonances due to nanostructures at material surfaces can greatly enhance radiative heat transfer (RHT) between two closely placed bodies owing to stretching of cavity states in momentum space beyond light line. Based on such understanding, we numerically demonstrate the possibility of ultra-broadband super-Planckian RHT between two plates patterned with trapezoidal-shaped hyperbolic metamaterial (HMM) arrays. The phenomenon is rooted not only in HMM's high effective index for creating sub-wavelength resonators, but also its extremely anisotropic isofrequency contour. The two properties enable one to create photonic bands with a high spectral density to populate a desired thermal radiation window. At sub-micron gap sizes between such two plates, the artificial continuum states extend outside light cone, tremendously increasing overall RHT. Our study reveals that structured HMM offers unprecedented potential in achieving a controllable super-Planckian radiative heat transfer for thermal management at nanoscale.

physics.optics↗
arXiv2016

Solid-state ensemble of highly entangled photon sources at rubidium atomic transitions

Semiconductor InAs/GaAs quantum dots grown by the Stranski-Krastanov method are among the leading candidates for the deterministic generation of polarization entangled photon pairs. Despite remarkable progress in the last twenty years, many challenges still remain for this material, such as the extremely low yield (<1% quantum dots can emit entangled photons), the low degree of entanglement, and the large wavelength distribution. Here we show that, with an emerging family of GaAs/AlGaAs quantum dots grown by droplet etching and nanohole infilling, it is possible to obtain a large ensemble (close to 100%) of polarization-entangled photon emitters on a wafer without any post-growth tuning. Under pulsed resonant two-photon excitation, all measured quantum dots emit single pairs of entangled photons with ultra-high purity, high degree of entanglement (fidelity up to F=0.91, with a record high concurrence C=0.90), and ultra-narrow wavelength distribution at rubidium transitions. Therefore, a solid-state quantum repeater - among many other key enabling quantum photonic elements - can be practically implemented with this new material.

quant-ph↗
arXiv2016

Tungsten based Anisotropic Metamaterial as an Ultra-broadband Absorber

The trapped rainbow effect has been mostly found on tapered anisotropic metamaterials (MMs) made of low loss noble metals, such as gold, silver, etc. In this work, we demonstrate that an anisotropic MM waveguide made of high loss metal tungsten can also support the trapped rainbow effect similar to the noble metal based structure. We show theoretically that an array of tungsten/germanium anisotropic nano-cones placed on top of a reflective substrate can absorb light at the wavelength range from 0.3 micrometer to 9 micrometer with an average absorption efficiency approaching 98%. It is found that the excitation of multiple orders of slow-light resonant modes is responsible for the efficient absorption at wavelengths longer than 2 micrometer, and the anti-reflection effect of tapered lossy material gives rise to the near perfect absorption at shorter wavelengths. The absorption spectrum suffers a small dip at around 4.2 micrometer where the first order and second order slow-light modes get overlapped, but we can get rid of this dip if the absorption band edge at long wavelength range is reduced down to 5 micrometer. The parametrical study reflects that the absorption bandwidth is mainly determined by the filling ratio of tungsten as well as the bottom diameter of the nano-cones and the interaction between neighboring nano-cones is quite weak. Our proposal has some potential applications in the areas of solar energy harvesting and thermal emitters.

physics.optics↗
arXiv2016

Electric-field-induced energy tuning of on-demand entangled-photon emission from self-assembled quantum dots

The scalability of quantum dot based non-classical light sources relies on the control over their dissimilar emission energies. Electric fields offer a promising route to tune the quantum dot emission energy through the quantum-confined Stark effect. However, electric fields have been mostly used for tuning the energy of single-photon emission from quantum dots, while electrical control over the energy of entangled-photon emission, which is crucial for building a solid-state quantum repeater using indistinguishable entangled photons, has not been realized yet. Here, we present a method to achieve electrical control over the energy of entangled-photon emission from quantum dots. The device consists of an electrically-tunable quantum diode integrated onto a piezoactuator. We find that, through application of a vertical electric field, the critical uniaxial stress used to eliminate the fine-structure-splitting of quantum dots can be linearly tuned. This allows realization of a triggered source of energy-tunable entangled-photon emission, an important step towards a solid-state quantum repeater application.

physics.optics↗
arXiv2016

An artificial Rb atom in a semiconductor with lifetime-limited linewidth

We report results important for the creation of a best-of-both-worlds quantum hybrid system consisting of a solid-state source of single photons and an atomic ensemble as quantum memory. We generate single photons from a GaAs quantum dot (QD) frequency-matched to the Rb D2-transitions and then use the Rb transitions to analyze spectrally the quantum dot photons. We demonstrate lifetime-limited QD linewidths (1.48 GHz) with both resonant and non-resonant excitation. The QD resonance fluorescence in the low power regime is dominated by Rayleigh scattering, a route to match quantum dot and Rb atom linewidths and to shape the temporal wave packet of the QD photons. Noise in the solid-state environment is relatively benign: there is a blinking of the resonance fluorescence at MHz rates but negligible upper state dephasing of the QD transition. We therefore establish a close-to-ideal solid-state source of single photons at a key wavelength for quantum technologies.

quant-ph↗
arXiv2015

Energy-tunable entangled photon sources on a III-V/Silicon chip

Many of the envisioned quantum photonic technologies, e.g. a quantum repeater, rely on an energy- (wavelength-) tunable source of polarization entangled photon pairs. The energy tunability is a fundamental requirement to perform two-photon-interference between different sources and to swap the entanglement. Parametric-down-conversion and four-wave-mixing sources of entangled photons have shown energy tunability, however the probabilistic nature of the sources limits their applications in complex quantum protocols. Here we report a silicon-based hybrid photonic chip where energy-tunable polarization entangled photons are generated by deterministic and scalable III-V quantum light sources. This device is based on a micro-electromechanical system (MEMS) incorporating InAs/GaAs quantum dots (QDs) on a PMNPT-on-silicon substrate. The entangled photon emissions from single QDs can be tuned by more than 3000 times of the radiative linewidth without spoiling the entanglement. With a footprint of several hundred microns, our design facilitates the miniaturization and scalable integration of indistinguishable entangled photon sources on silicon. When interfaced with silicon-based quantum photonic circuits, this device will offer a vast range of exciting possibilities.

cond-mat.mes-hall↗
arXiv2015

Electron and nuclear spin properties of the nanohole-filled GaAs/AlGaAs quantum dots

GaAs/AlGaAs quantum dots grown by in-situ droplet etching and nanohole infilling offer a combination of strong charge confinement, optical efficiency, and spatial symmetry required for polarization entanglement and spin-photon interface. Here we study spin properties of such dots. We find nearly vanishing electron $g$-factor ($g_e<0.05$), providing a route for electrically driven spin control schemes. Optical manipulation of the nuclear spin environment is demonstrated with nuclear spin polarization up to $60\%$ achieved. NMR spectroscopy reveals the structure of two types of quantum dots and yields the small magnitude of residual strain $ε_b<0.02\%$ which nevertheless leads to long nuclear spin lifetimes exceeding 1000 s. The stability of the nuclear spin environment is advantageous for applications in quantum information processing.

cond-mat.mes-hall↗
arXiv2015

Strain-tunable entangled-light-emitting diodes with high yield and fast operation speed

Triggered sources of entangled photons play crucial roles in almost any existing protocol of quantum information science. The possibility to generate these non-classical states of light with high speed and using electrical pulses could revolutionize the field. Entangled-light-emitting-diodes (ELEDs) based on semiconductor quantum dots (QDs) are at present the only devices that can address this task 5. However, ELEDs are plagued by a source of randomness that hampers their practical exploitation in the foreseen applications: the very low probability (~10-2) of finding QDs with sufficiently small fine-structure-splitting for entangled-photon-generation. Here, we overcome this hurdle by introducing the first strain-tunable ELEDs (S-ELEDs) that exploit piezoelectric-induced strains to tune QDs for entangled-photon-generation. We demonstrate that up to 30% of the QDs in S-ELEDs emit polarization-entangled photon pairs with entanglement-fidelities as high as f+ = 0.83(5). Driven at the highest operation speed of 400 MHz ever reported so far, S-ELEDs emerge as unique devices for high-data rate entangled-photon applications.

quant-ph↗
arXiv2014

High-performance THz metamaterial absorber

We demonstrated an ultra-broadband, polarization-insensitive and wide-angle metamaterial absorber for terahertz (THz) frequencies using arrays of truncated pyramid unit structure made of metal-dielectric multilayer composite. In our design each sub-layer behaving as an effective waveguide is gradually modified in their lateral width to realize a wideband response by effectively stitching together the resonance bands of different waveguide modes. Experimentally, our five layer sample with a total thickness 21um is capable of producing a large absorptivity above 80% from 0.7 to 2.3 THz up to the maximum measurement angle 40°. The full absorption width at half maximum (FWHM) of our device is around 127%, greater than those previously reported for THz frequencies. Our absorber design has high practical feasibility and can be easily integrated with the semiconductor technology to make high efficient THz-oriented devices.

physics.optics↗