Searcharxiv⌕ Search

arXiv subjects

Fei He

Publications and source records attributed to Fei He.

83 records · Page 5Linked to original sources

Seeing the Big Picture: Deep Embedding with Contextual Evidences

In the Bag-of-Words (BoW) model based image retrieval task, the precision of visual matching plays a critical role in improving retrieval performance. Conventionally, local cues of a keypoint are employed. However, such strategy does not consider the contextual evidences of a keypoint, a problem which would lead to the prevalence of false matches. To address this problem, this paper defines "true match" as a pair of keypoints which are similar on three levels, i.e., local, regional, and global. Then, a principled probabilistic framework is established, which is capable of implicitly integrating discriminative cues from all these feature levels. Specifically, the Convolutional Neural Network (CNN) is employed to extract features from regional and global patches, leading to the so-called "Deep Embedding" framework. CNN has been shown to produce excellent performance on a dozen computer vision tasks such as image classification and detection, but few works have been done on BoW based image retrieval. In this paper, firstly we show that proper pre-processing techniques are necessary for effective usage of CNN feature. Then, in the attempt to fit it into our model, a novel indexing structure called "Deep Indexing" is introduced, which dramatically reduces memory usage. Extensive experiments on three benchmark datasets demonstrate that, the proposed Deep Embedding method greatly promotes the retrieval accuracy when CNN feature is integrated. We show that our method is efficient in terms of both memory and time cost, and compares favorably with the state-of-the-art methods.

cs.CV↗

Fabrication of an integrated high-quality-factor (high-Q) optofluidic sensor by femtosecond laser micromachining

We report on fabrication of a microtoroid resonator of a high-quality factor (i. e., Q-factor of ~3.24x10^6 measured under the critical coupling condition) integrated in a microfluidic channel using femtosecond laser three-dimensional (3D) micromachining. Coupling of light into and out of the microresonator has been realized with a fiber taper that is reliably assembled with the microtoroid. The assembly of the fiber to the microtoroid is achieved by welding the fiber taper onto the sidewall of the microtoroid using CO_2 laser irradiation. The integrated microresonator maintains a high Q-factor of 3.21x10^5 as measured in air, which should still be sufficient for many sensing applications. We test the functionality of the integrated optofluidic sensor by performing bulk refractive index sensing of purified water doped with tiny amount of salt. It is shown that a detection limit of ~1.2x10^-4 refractive index unit can be achieved. Our result showcases the capability of integration of high-Q microresonators with complex microfluidic systems using femtosecond laser 3D micromachining.

physics.optics↗

Fabrication of three-dimensional microdisk resonators in calcium fluoride by femtosecond laser micromachining

We report on fabrication of on-chip calcium fluoride (CaF2) microdisk resonators using water-assisted femtosecond laser micromachining. Focused ion beam (FIB) milling is used to create ultra-smooth sidewalls. The quality (Q)-factors of the fabricated microresonators are measured to be 4.2x10^4 at wavelengths near 1550 nm. The Q factor is mainly limited by the scattering from the bottom surface of the disk whose roughness remains high due to the femtosecond laser micromachining process. This technique facilitates formation of on-chip microresonators on various kinds of bulk crystalline materials, which can benefit a wide range of applications such as nonlinear optics, quantum optics, and chip-level integration of photonic devices.

physics.optics↗

Second harmonic generation in a centrosymmetric gas medium with spatiotemporally focused intense femtosecond laser pulses

We demonstrate unexpectedly strong second harmonic generation (SHG) in Argon gas by use of spatiotemporally focused (SF) femtosecond laser pulses. The resulting SHG by the SF scheme at a 75 cm distance shows a significantly enhanced efficiency than that achieved with conventional focusing scheme, which offers a new promising possibility for standoff applications. Our theoretical calculations reasonably reproduce the experimental observations, which indicate that the observed SHG mainly originates from the gradient of nonuniform plasma dynamically controlled by the SF laser field.

physics.optics↗

Exponential-Condition-Based Barrier Certificate Generation for Safety Verification of Hybrid Systems

A barrier certificate is an inductive invariant function which can be used for the safety verification of a hybrid system. Safety verification based on barrier certificate has the benefit of avoiding explicit computation of the exact reachable set which is usually intractable for nonlinear hybrid systems. In this paper, we propose a new barrier certificate condition, called Exponential Condition, for the safety verification of semi-algebraic hybrid systems. The most important benefit of Exponential Condition is that it has a lower conservativeness than the existing convex condition and meanwhile it possesses the property of convexity. On the one hand, a less conservative barrier certificate forms a tighter over-approximation for the reachable set and hence is able to verify critical safety properties. On the other hand, the property of convexity guarantees its solvability by semidefinite programming method. Some examples are presented to illustrate the effectiveness and practicality of our method.

cs.SE↗

Capacity Region Bounds and Resource Allocation for Two-Way OFDM Relay Channels

In this paper, we consider two-way orthogonal frequency division multiplexing (OFDM) relay channels, where the direct link between the two terminal nodes is too weak to be used for data transmission. The widely known per-subcarrier decode-and-forward (DF) relay strategy, treats each subcarrier as a separate channel, and performs independent channel coding over each subcarrier. We show that this per-subcarrier DF relay strategy is only a suboptimal DF relay strategy, and present a multi-subcarrier DF relay strategy which utilizes cross-subcarrier channel coding to achieve a larger rate region. We then propose an optimal resource allocation algorithm to characterize the achievable rate region of the multi-subcarrier DF relay strategy. The computational complexity of this algorithm is much smaller than that of standard Lagrangian duality optimization algorithms. We further analyze the asymptotic performance of two-way relay strategies including the above two DF relay strategies and an amplify-and-forward (AF) relay strategy. The analysis shows that the multi-subcarrier DF relay strategy tends to achieve the capacity region of the two-way OFDM relay channels in the low signal-to-noise ratio (SNR) regime, while the AF relay strategy tends to achieve the multiplexing gain region of the two-way OFDM relay channels in the high SNR regime. Numerical results are provided to justify all the analytical results and the efficacy of the proposed optimal resource allocation algorithm.

cs.IT↗

Low-threshold whispering-gallery-mode microlasers fabricated in a Nd: glass substrate by three-dimensional femtosecond laser micromachining

We report on fabrication of whispering-gallery-mode microlasers in a Nd:glass chip by femtosecond laser three-dimensional (3D) micromachining. Main fabrication procedures include the fabrication of freestanding microdisks supported by thin pillars by femtosecond laser ablation of the glass substrate immersed in water, followed by CO2 laser annealing for surface smoothing. Lasing is observed at a pump threshold as low as ~69 μW at room temperature with a continuous-wave laser diode operating at 780nm. This technique allows for fabrication of microcavities of high quality factors in various dielectric materials such as glasses and crystals.

physics.optics↗

On-chip three-dimensional high-Q microcavities fabricated by femtosecond laser direct writing

We report on the fabrication of three-dimensional (3D) high-Q whispering gallery microcavities on a fused silica chip by femtosecond laser microfabriction, enabled by the 3D nature of femtosecond laser direct writing. The processing mainly consists of formation of freestanding microdisks by femtosecond laser direct writing and subsequent wet chemical etching. CO2 laser annealing is followed to smooth the microcavity surface. Microcavities with arbitrary tilting angle, lateral and vertical positioning are demonstrated, and the quality (Q)-factor of a typical microcavity is measured to be up to 1.07x10^6, which is currently limited by the low spatial resolution of motion stage used during the laser patterning and can be improved with motion stages of higher resolutions.

physics.optics↗

Optimal Power Allocation for Two-Way Decode-and-Forward OFDM Relay Networks

This paper presents a novel two-way decode-and-forward (DF) relay strategy for Orthogonal Frequency Division Multiplexing (OFDM) relay networks. This DF relay strategy employs multi-subcarrier joint channel coding to leverage frequency selective fading, and thus can achieve a higher data rate than the conventional per-subcarrier DF relay strategies. We further propose a low-complexity, optimal power allocation strategy to maximize the data rate of the proposed relay strategy. Simulation results suggest that our strategy obtains a substantial gain over the per-subcarrier DF relay strategies, and also outperforms the amplify-and-forward (AF) relay strategy in a wide signal-to-noise-ratio (SNR) region.

cs.IT↗

Towards High-Performance Network Application Identification With Aggregate-Flow Cache

Classifying network traffic according to their application-layer protocols is an important task in modern networks for traffic management and network security. Existing payload-based or statistical methods of application identification cannot meet the demand of both high performance and accurate identification at the same time. We propose an application identification framework that classifies traffic at aggregate-flow level leveraging aggregate-flow cache. A detailed traffic classifier designed based on this framework is illustrated to improve the throughput of payload-based identification methods. We further optimize the classifier by proposing an efficient design of aggregate-flow cache. The cache design employs a frequency-based, recency-aware replacement algorithm based on the analysis of temporal locality of aggregate-flow cache. Experiments on real-world traces show that our traffic classifier with aggregate-flow cache can reduce up to 95% workload of backend identification engine. The proposed cache replacement algorithm outperforms well-known replacement algorithms, and achieves 90% of the optimal performance using only 15% of memory. The throughput of a payload-based identification system, L7-filter [1], is increased by up to 5.1 times by using our traffic classifier design.

cs.NI↗