arXiv subjects

Feifei Gao

Publications and source records attributed to Feifei Gao.

At least 127 records · Page 7Linked to original sources

arXiv2019

Mode Hopping for Anti-Jamming in Cognitive Radio Networks

Frequency hopping (FH) is an effective anti-jamming technology in cognitive radio networks (CRNs). However, it is difficult to significantly increase the anti-jamming results because of the growing crowded spectrum in wireless communications. Orbital momentum angular (OAM) provides a new mode dimension for anti-jamming without consuming extra power and frequency resources in CRNs. In this paper, we propose the mode-frequency hopping (MFH) scheme, which jointly uses the mode hopping and the traditional FH scheme for anti-jamming to significantly increase the capacity of secondary users (SUs). We derive the false alarm probability and transmission outage probability for CRNs under our proposed MFH scheme. Then, based on the two derived probabilities, we calculate the capacity of SUs under the MFH scheme. Numerical results show that our developed MFH scheme can achieve better anti-jamming results as compared with the traditional FH scheme in CRNs.

eess.SP↗

arXiv2019

Beam Squint and Channel Estimation for Wideband mmWave Massive MIMO-OFDM Systems

With the increasing scale of antenna arrays in wideband millimeter-wave (mmWave) communications, the physical propagation delays of electromagnetic waves traveling across the whole array will become large and comparable to the time-domain sample period, which is known as the spatial-wideband effect. In this case, different subcarriers in an orthogonal frequency division multiplexing (OFDM) system will "see" distinct angles of arrival (AoAs) for the same path. This effect is known as beam squint, resulting from the spatial-wideband effect, and makes the approaches based on the conventional multiple-input multiple-output (MIMO) model, such as channel estimation and precoding, inapplicable. After discussing the relationship between beam squint and the spatial-wideband effect, we propose a channel estimation scheme for frequency-division duplex (FDD) mmWave massive MIMO-OFDM systems with hybrid analog/digital precoding, which takes the beam squint effect into consideration. A super-resolution compressed sensing approach is developed to extract the frequency-insensitive parameters of each uplink channel path, i.e., the AoA and the time delay, and the frequency-sensitive parameter, i.e., the complex channel gain. With the help of the reciprocity of these frequency-insensitive parameters in FDD systems, the downlink channel estimation can be greatly simplified, where only limited pilots are needed to obtain downlink complex gains and reconstruct downlink channels. Furthermore, the uplink and downlink channel covariance matrices can be constructed from these frequency-insensitive channel parameters rather than through a long-term average, which enables the minimum mean-squared error (MMSE) channel estimation to further enhance performance. Numerical results demonstrate the superiority of the proposed scheme over the conventional methods in mmWave communications.

cs.IT↗

arXiv2019

Model-Driven Deep Learning for Physical Layer Communications

Intelligent communication is gradually considered as the mainstream direction in future wireless communications. As a major branch of machine learning, deep learning (DL) has been applied in physical layer communications and has demonstrated an impressive performance improvement in recent years. However, most of the existing works related to DL focus on data-driven approaches, which consider the communication system as a black box and train it by using a huge volume of data. Training a network requires sufficient computing resources and extensive time, both of which are rarely found in communication devices. By contrast, model-driven DL approaches combine communication domain knowledge with DL to reduce the demand for computing resources and training time. This article reviews the recent advancements in the application of model-driven DL approaches in physical layer communications, including transmission scheme, receiver design, and channel information recovery. Several open issues for further research are also highlighted after presenting the comprehensive survey.

cs.IT↗

arXiv2019

On the Uplink Achievable Rate of Massive MIMO System With Low-Resolution ADC and RF Impairments

This paper considers channel estimation and uplink achievable rate of the coarsely quantized massive multiple-input multiple-output (MIMO) system with radio frequency (RF) impairments. We utilize additive quantization noise model (AQNM) and extended error vector magnitude (EEVM) model to analyze the impacts of low-resolution analog-to-digital converters (ADCs) and RF impairments respectively. We show that hardware impairments cause a nonzero floor on the channel estimation error, which contraries to the conventional case with ideal hardware. The maximal-ratio combining (MRC) technique is then used at the receiver, and an approximate tractable expression for the uplink achievable rate is derived. The simulation results illustrate the appreciable compensations between ADCs' resolution and RF impairments. The proposed studies support the feasibility of equipping economical coarse ADCs and economical imperfect RF components in practical massive MIMO systems.

eess.SP↗

arXiv2018

Interference-Free Transceiver Design and Signal Detection for Ambient Backscatter Communication Systems over Frequency-Selective Channels

In this letter, we study the ambient backscatter communication systems over frequency-selective channels. Specifically, we propose an interference-free transceiver design to facilitate signal detection at the reader. Our design utilizes the cyclic prefix (CP) of orthogonal frequency-division multiplexing (OFDM) source symbols, which can cancel the signal interference and thus enhance the detection accuracy at the reader. Meanwhile, our design results in no interference on the existing OFDM communication systems. We also suggest a maximum likelihood (ML) detector for the reader and derive two detection thresholds. Simulations are then provided to corroborate our proposed studies.

cs.IT↗

arXiv2018

Hardware-Constrained Millimeter Wave Systems for 5G: Challenges, Opportunities, and Solutions

Although millimeter wave (mmWave) systems promise to offer larger bandwidth and unprecedented peak data rates, their practical implementation faces several hardware challenges compared to sub-6 GHz communication systems. These hardware constraints can seriously undermine the performance and deployment progress of mmWave systems and, thus, necessitate disruptive solutions in the cross-design of analog and digital modules. In this article, we discuss the importance of different hardware constraints and propose a novel system architecture, which is able to release these hardware constraints while achieving better performance for future millimeter wave communication systems. The characteristics of the proposed architecture are articulated in detail, and a representative example is provided to demonstrate its validity and efficacy.

cs.IT↗

arXiv2018

Frequency Synchronization for Uplink Massive MIMO with Adaptive MUI Suppression in Angle-domain

In this paper, we develop a novel angle-domain adaptive filtering (ADAF)-based frequency synchronization method for the uplink of a massive multiple-input multiple-output (MIMO) multiuser network, which is applicable for users with either separate or overlapped angle-of-arrival (AoA) regions. For each user, we first introduce the angle-constraining matrix (ACM), which consists of a set of selected match-filter (MF) beamformers pointing to the AoAs of the interested user. Then, the adaptive beamformer can be acquired by appropriately designing the ADAF vectors. Such beamformer can achieve two-stage adaptive multiuser interference (MUI) suppression, i.e., inherently suppressing the MUI from non-overlapping users by ACM in the first stage and substantially mitigating the MUI from adjacent overlapping users by ADAF vector in the second stage. For both separate and mutually overlapping users, the carrier frequency offset (CFO) estimation and subsequent data detection can be performed independently for each user, which significantly reduces computational complexity. Moreover, ADAF is rather robust to imperfect AoA knowledge and side cluster of scatterers, making itself promising for multiuser uplink transmission. We also analyze the performance of CFO estimation and obtain an approximated closed-form expression of mean-squared error (MSE). The effectiveness of the proposed method and its superiority over the existing methods are demonstrated by numerical results.

eess.SP↗

arXiv2018

Angle-Domain Approach for Parameter Estimation in High-Mobility OFDM with Fully/Partly Calibrated Massive ULA

In this paper, we consider a downlink orthogonal frequency division multiplexing (OFDM) system from a base station to a high-speed train (HST) equipped with fully/partly calibrated massive uniform linear antenna-array (ULA) in wireless environments with abundant scatterers. Multiple Doppler frequency offsets (DFOs) stemming from intensive propagation paths together with transceiver oscillator frequency offset (OFO) result in a fast time-varying frequency-selective channel. We develop an angle domain carrier frequency offset (CFO, general designation for DFO and OFO) estimation approach. A high-resolution beamforming network is designed to separate different DFOs into a set of parallel branches in angle domain such that each branch is mainly affected by a single dominant DFO. Then, a joint estimation algorithm for both maximum DFO and OFO is developed for fully calibrated ULA. Next, its estimation mean square error (MSE) performance is analyzed under inter-subarray mismatches. To mitigate the detrimental effects of inter-subarray mismatches, we introduce a calibration-oriented beamforming parameter (COBP) and develop the corresponding modified joint estimation algorithm for partly calibrated ULA. Moreover, the Cramer-Rao lower bound of CFO estimation is derived. Both theoretical and numerical results are provided to corroborate the proposed method.

eess.SP↗

arXiv2018

High-Mobility Wideband Massive MIMO Communications: Doppler Compensation, Analysis and Scaling Law

In this paper, we apply angle-domain Doppler compensation for high-mobility wideband massive multi-input multi-output (MIMO) uplink transmission. The time-varying multipath channel is considered between high-speed terminal and static base station (BS), where multiple Doppler frequency offsets (DFOs) are associated with distinct angle of departures (AoDs). With the aid of the large-scale uniform linear array (ULA) at the transmitter, we design a beamforming network to generate multiple parallel beamforming branches, each transmitting signal pointing to one particular angle. Then, the transmitted signal in each branch will experience only one dominant DFO when passing over the time-varying channel, which can be easily compensated before transmission starts. We theoretically analyze the Doppler spread of the equivalent uplink channel after angle-domain Doppler compensation, which takes into account both the mainlobe and sidelobes of the transmit beam in each branch. It is seen that the channel time-variation can be effectively suppressed if the number of transmit antennas is sufficiently large. Interestingly, the asymptotic scaling law of channel variation is obtained, which shows that the Doppler spread is proportional to the maximum DFO and decreases approximately as $1/\sqrt{M}$ ($M$ is the number of transmit antennas) when $M$ is sufficiently large. Numerical results are provided to corroborate the proposed scheme.

cs.IT↗

arXiv2018

Spatial- and Frequency-Wideband Effects in Millimeter-Wave Massive MIMO Systems

When there are a large number of antennas in massive MIMO systems, the transmitted wideband signal will be sensitive to the physical propagation delay of electromagnetic waves across the large array aperture, which is called the spatial-wideband effect. In this scenario, transceiver design is different from most of the existing works, which presume that the bandwidth of the transmitted signals is not that wide, ignore the spatial-wideband effect, and only address the frequency selectivity. In this paper, we investigate spatial- and frequency-wideband effects, called dual-wideband effects, in massive MIMO systems from array signal processing point of view. Taking mmWave-band communications as an example, we describe the transmission process to address the dual-wideband effects. By exploiting the channel sparsity in the angle domain and the delay domain, we develop the efficient uplink and downlink channel estimation strategies that require much less amount of training overhead and cause no pilot contamination. Thanks to the array signal processing techniques, the proposed channel estimation is suitable for both TDD and FDD massive MIMO systems. Numerical examples demonstrate that the proposed transmission design for massive MIMO systems can effectively deal with the dual-wideband effects.

cs.IT↗

arXiv2018

Efficient Channel Estimator with Angle-Division Multiple Access

Massive multiple-input multiple-output (M-MIMO) is an enabling technology of 5G wireless communication. The performance of an M-MIMO system is highly dependent on the speed and accuracy of obtaining the channel state information (CSI). The computational complexity of channel estimation for an M-MIMO system can be reduced by making use of the sparsity of the M-MIMO channel. In this paper, we propose the hardware-efficient channel estimator based on angle-division multiple access (ADMA) for the first time. Preamble, uplink (UL) and downlink (DL) training are also implemented. For further hardware-efficiency consideration, optimization regarding quantization and approximation strategies have been discussed. Implementation techniques such as pipelining and systolic processing are also employed for hardware regularity. Numerical results and FPGA implementation have demonstrated the advantages of the proposed channel estimator.

eess.SP↗

arXiv2018

Time Varying Channel Tracking with Spatial and Temporal BEM for Massive MIMO Systems

In this paper, we propose a channel tracking method for massive multi-input and multi-output systems under both time-varying and spatial-varying circumstance. Exploiting the characteristics of massive antenna array, a spatial-temporal basis expansion model is designed to reduce the effective dimensions of up-link and down-link channel, which decomposes channel state information into the time-varying spatial information and gain information. We firstly model the users movements as a one-order unknown Markov process, which is blindly learned by the expectation and maximization (EM) approach. Then, the up-link time varying spatial information can be blindly tracked by Taylor series expansion of the steering vector, while the rest up-link channel gain information can be trained by only a few pilot symbols. Due to angle reciprocity (spatial reciprocity), the spatial information of the down-link channel can be immediately obtained from the up-link counterpart, which greatly reduces the complexity of down-link channel tracking. Various numerical results are provided to demonstrate the effectiveness of the proposed method.

eess.SP↗

arXiv2017

Robust Beamforming for Physical Layer Security in BDMA Massive MIMO

In this paper, we design robust beamforming to guarantee the physical layer security for a multiuser beam division multiple access (BDMA) massive multiple-input multiple-output (MIMO) system, when the channel estimation errors are taken into consideration. With the aid of artificial noise (AN), the proposed design are formulated as minimizing the transmit power of the base station (BS), while providing legal users and the eavesdropper (Eve) with different signal-to-interference-plus-noise ratio (SINR). It is strictly proved that, under BDMA massive MIMO scheme, the initial non-convex optimization can be equivalently converted to a convex semi-definite programming (SDP) problem and the optimal rank-one beamforming solutions can be guaranteed. In stead of directly resorting to the convex tool, we make one step further by deriving the optimal beamforming direction and the optimal beamforming power allocation in closed-form, which greatly reduces the computational complexity and makes the proposed design practical for real world applications. Simulation results are then provided to verify the efficiency of the proposed algorithm.

cs.IT↗

arXiv2017

Power Control in UAV-Supported Ultra Dense Networks: Communications, Caching, and Energy Transfer

By means of network densification, ultra dense networks (UDNs) can efficiently broaden the network coverage and enhance the system throughput. In parallel, unmanned aerial vehicles (UAVs) communications and networking have attracted increasing attention recently due to their high agility and numerous applications. In this article, we present a vision of UAV-supported UDNs. Firstly, we present four representative scenarios to show the broad applications of UAV-supported UDNs in communications, caching and energy transfer. Then, we highlight the efficient power control in UAV-supported UDNs by discussing the main design considerations and methods in a comprehensive manner. Furthermore, we demonstrate the performance superiority of UAV-supported UDNs via case study simulations, compared to traditional fixed infrastructure based networks. In addition, we discuss the dominating technical challenges and open issues ahead.

cs.NI↗

arXiv2017

Deep Learning for Wireless Physical Layer: Opportunities and Challenges

Machine learning (ML) has been widely applied to the upper layers of wireless communication systems for various purposes, such as deployment of cognitive radio and communication network. However, its application to the physical layer is hampered by sophisticated channel environments and limited learning ability of conventional ML algorithms. Deep learning (DL) has been recently applied for many fields, such as computer vision and natural language processing, given its expressive capacity and convenient optimization capability. The potential application of DL to the physical layer has also been increasingly recognized because of the new features for future communications, such as complex scenarios with unknown channel models, high speed and accurate processing requirements; these features challenge conventional communication theories. This paper presents a comprehensive overview of the emerging studies on DL-based physical layer processing, including leveraging DL to redesign a module of the conventional communication system (for modulation recognition, channel decoding, and detection) and replace the communication system with a radically new architecture based on an autoencoder. These DL-based methods show promising performance improvements but have certain limitations, such as lack of solid analytical tools and use of architectures that are specifically designed for communication and implementation research, thereby motivating future research in this field.

cs.IT↗

arXiv2017

Channel Estimation for TDD/FDD Massive MIMO Systems with Channel Covariance Computing

In this paper, we propose a new channel estimation scheme for TDD/FDD massive MIMO systems by reconstructing uplink/downlink channel covariance matrices (CCMs) with the aid of array signal processing techniques. Specifically, the angle information and power angular spectrum (PAS) of each multi-path channel is extracted from the instantaneous uplink channel state information (CSI). Then, the uplink CCM is reconstructed and can be used to improve the uplink channel estimation without any additional training cost. In virtue of angle reciprocity as well as PAS reciprocity between uplink and downlink channels, the downlink CCM could also be inferred with a similar approach even for FDD massive MIMO systems. Then, the downlink instantaneous CSI can be obtained by training towards the dominant eigen-directions of each user. The proposed strategy is applicable for any kind of PAS distributions and array geometries. Numerical results are provided to demonstrate the superiority of the proposed methods over the existing ones.

cs.IT↗

arXiv2017

Beam Tracking for UAV Mounted SatCom on-the-Move with Massive Antenna Array

Unmanned aerial vehicle (UAV)-satellite communication has drawn dramatic attention for its potential to build the integrated space-air-ground network and the seamless wide-area coverage. The key challenge to UAV-satellite communication is its unstable beam pointing due to the UAV navigation, which is a typical SatCom on-the-move scenario. In this paper, we propose a blind beam tracking approach for Ka-band UAVsatellite communication system, where UAV is equipped with a large-scale antenna array. The effects of UAV navigation are firstly released through the mechanical adjustment, which could approximately point the beam towards the target satellite through beam stabilization and dynamic isolation. Specially, the attitude information can be realtimely derived from data fusion of lowcost sensors. Then, the precision of the beam pointing is blindly refined through electrically adjusting the weight of the massive antennas, where an array structure based simultaneous perturbation algorithm is designed. Simulation results are provided to demonstrate the superiority of the proposed method over the existing ones.

eess.SY↗

arXiv2017

Beamspace Channel Estimation in mmWave Systems via Cosparse Image Reconstruction Technique

This paper considers the beamspace channel estimation problem in 3D lens antenna array under a millimeter-wave communication system. We analyze the focusing capability of the 3D lens antenna array and the sparsity of the beamspace channel response matrix. Considering the analysis, we observe that the channel matrix can be treated as a 2D natural image; that is, the channel is sparse, and the changes between adjacent elements are subtle. Thus, for the channel estimation, we incorporate an image reconstruction technique called sparse non-informative parameter estimator-based cosparse analysis AMP for imaging (SCAMPI) algorithm. The SCAMPI algorithm is faster and more accurate than earlier algorithms such as orthogonal matching pursuit and support detection algorithms. To further improve the SCAMPI algorithm, we model the channel distribution as a generic Gaussian mixture (GM) probability and embed the expectation maximization learning algorithm into the SCAMPI algorithm to learn the parameters in the GM probability. We show that the GM probability outperforms the common uniform distribution used in image reconstruction. We also propose a phase-shifter-reduced selection network structure to decrease the power consumption of the system and prove that the SCAMPI algorithm is robust even if the number of phase shifters is reduced by 10%.

cs.IT↗