arXiv subjects

Felipe Daruich

Publications and source records attributed to Felipe Daruich.

7 recordsLinked to original sources

arXiv2026

Rubin M1M3 Dynamic performance : stability and actuation during operations

The Vera C. Rubin Observatory is preparing to commence the Legacy Survey of Space and Time with the fully integrated Simonyi Survey Telescope. To verify that the primary/tertiary (M1M3) mirror system is ready to meet the demanding survey requirements, dynamic tests of the 8.4 m, 53 ton M1M3 system were conducted to assess safety, stability, and image quality under realistic operating conditions. The M1M3 is supported by 156 pneumatic force actuators and positioned, relative to its mirror cell, by six hardpoint actuators that together must counteract gravitational and inertial loads during rapid telescope motion. The Rubin Observatory telescope mount is capable of moving at a rate that meets its nominal motion requirements, and can approach it maximum allowable values that are 50 percent higher. Even at just 20 % of its operational speed, it is an exceptionally fast motion for such a large structure. After slewing, the system must stabilize and dampen vibrations within 5 seconds to ensure image quality during observations. Achieving this rapid settling requires precise control of 156 force actuators, which must adjust dynamically with changes in telescope elevation to compensate for gravity effects. We present results for M1M3 from a comprehensive series of TMA dynamical tests spanning the operational envelope of slew velocities and accelerations. The analysis evaluates elevation axis balancing and lookup table updating as we install the M1M3 mirror; slew-and-settle behavior, force response and stability of the pneumatic actuator system across telescope attitudes including responses to the earthquake. The results demonstrate the readiness of the M1M3 subsystem for routine survey operations and provide validation data for ongoing performance modeling.

astro-ph.IM↗

arXiv2026

The Vera C. Rubin Observatory Data Preview 1

We present Rubin Data Preview 1 DP1, the first data from the NSF DOE Vera C Rubin Observatory, comprising raw and calibrated single epoch images, coadds, difference images, detection catalogs, and ancillary data products. DP1 is based on 1792 optical near infrared exposures acquired over 48 distinct nights by the Rubin Commissioning Camera LSSTComCam on the Simonyi Survey Telescope at the Summit Facility on Cerro Pach\'on Chile in late 2024. DP1 covers $\sim$15 deg$^2$ distributed across seven roughly equal-sized non-contiguous fields, each independently observed in six broad photometric bands $ugrizy$. The median FWHM of the point spread function across all bands is approximately 1.14 arcseconds, with the sharpest images reaching about 0.58 arcseconds. The 5$\sigma$ point source depths for coadded images in the deepest field the Extended Chandra Deep Field South are $u$ = 24.55, $g$ = 26.18, $r$ = 25.96, $i$ = 25.71, $z$ = 25.07, $y$ = 23.1. Other fields are no more than 2.2 magnitudes shallower in any band where they have nonzero coverage. DP1 contains approximately 2.3 million distinct astrophysical objects, of which 1.6 million are extended in at least one band in coadds and 431 solar system objects of which 93 are new discoveries. DP1 is approximately 3.5 TB in size and is available to Rubin data rights holders via the Rubin Science Platform a cloud based environment for the analysis of petascale astronomical data. While small compared to future LSST releases its high quality and diversity of data support a broad range of early science investigations ahead of full operations in 2026.

astro-ph.IM↗

arXiv2025

Identification and photometric classification of extragalactic transients in the Vera C. Rubin Observatory's Data Preview 1

The Vera C. Rubin Observatory will soon survey the southern sky, delivering a depth and sky coverage that is unprecedented in time domain astronomy. As part of commissioning, Data Preview 1 (DP1) has been released. It comprises a LSSTComCam observing campaign between November and December 2024 with multi-band imaging of seven fields, covering roughly 0.4 square degrees each, providing a first glimpse into the data products that will become available once the Legacy Survey of Space and Time begins. In this work, we search three fields for extragalactic transients. We identify eight new likely supernovae, and three known ones from a sample of 369,644 difference image analysis objects. Photometric classification using Superphot+ assigns sub-classes with >95% confidence to only one SN Ia and one SN II in this sample. Our findings are in agreement with supernova detection rate predictions of $15\pm4$ supernovae from simulations using simsurvey. The supernova detection rate in the data is possibly affected by the lack of suitable templates. Nevertheless, this work demonstrates the quality of the data products delivered in DP1 and indicates that the Rubin Observatory's Legacy Survey of Space and Time (LSST) is well placed to fulfill its discovery potential in time domain astronomy.

astro-ph.HE↗

arXiv2025

Enabling Early Transient Discovery in LSST via Difference Imaging with DECam

We present SLIDE, a pipeline that enables transient discovery in data from the Vera C. Rubin Observatory's Legacy Survey of Space and Time (LSST), using archival images from the Dark Energy Camera (DECam) as templates for difference imaging. We apply this pipeline to the recently released Data Preview 1 (DP1; the first public release of Rubin commissioning data) and search for transients in the resulting difference images. The image subtraction, photometry extraction, and transient detection are all performed on the Rubin Science Platform. We demonstrate that SLIDE effectively extracts clean photometry by circumventing poor or missing LSST templates. We identified 29 previously unreported transients, 12 of which would not have been detected based on the DP1 DiaObject catalog. SLIDE will be especially useful for transient analysis in the early years of LSST, when template coverage will be largely incomplete or when templates may be contaminated by transients present at the time of acquisition. We present multiband light curves for a sample of known transients, along with new transient candidates identified through our search. Finally, we discuss the prospects of applying this pipeline during the main LSST survey. Our pipeline is broadly applicable and will support studies of all transients with slowly evolving phases.

astro-ph.HE↗

arXiv2025

Variability-finding in Rubin Data Preview 1 with LSDB

The Vera C. Rubin Observatory recently released Data Preview 1 (DP1) in advance of the upcoming Legacy Survey of Space and Time (LSST), which will enable boundless discoveries in time-domain astronomy over the next ten years. DP1 provides an ideal sandbox for validating innovative data analysis approaches for the LSST mission, whose scale challenges established software infrastructure paradigms. This note presents a pair of such pipelines for variability-finding using powerful software infrastructure suited to LSST data, namely the HATS (Hierarchical Adaptive Tiling Scheme) format and the LSDB framework, developed by the LSST Interdisciplinary Network for Collaboration and Computing (LINCC) Frameworks team. This article presents a pair of variability-finding pipelines built on LSDB, the HATS catalog of DP1 data, and preliminary results of detected variable objects, two of which are novel discoveries.

astro-ph.IM↗

arXiv2018

LSST: from Science Drivers to Reference Design and Anticipated Data Products

(Abridged) We describe here the most ambitious survey currently planned in the optical, the Large Synoptic Survey Telescope (LSST). A vast array of science will be enabled by a single wide-deep-fast sky survey, and LSST will have unique survey capability in the faint time domain. The LSST design is driven by four main science themes: probing dark energy and dark matter, taking an inventory of the Solar System, exploring the transient optical sky, and mapping the Milky Way. LSST will be a wide-field ground-based system sited at Cerro Pachón in northern Chile. The telescope will have an 8.4 m (6.5 m effective) primary mirror, a 9.6 deg$^2$ field of view, and a 3.2 Gigapixel camera. The standard observing sequence will consist of pairs of 15-second exposures in a given field, with two such visits in each pointing in a given night. With these repeats, the LSST system is capable of imaging about 10,000 square degrees of sky in a single filter in three nights. The typical 5$σ$ point-source depth in a single visit in $r$ will be $\sim 24.5$ (AB). The project is in the construction phase and will begin regular survey operations by 2022. The survey area will be contained within 30,000 deg$^2$ with $δ<+34.5^\circ$, and will be imaged multiple times in six bands, $ugrizy$, covering the wavelength range 320--1050 nm. About 90\% of the observing time will be devoted to a deep-wide-fast survey mode which will uniformly observe a 18,000 deg$^2$ region about 800 times (summed over all six bands) during the anticipated 10 years of operations, and yield a coadded map to $r\sim27.5$. The remaining 10\% of the observing time will be allocated to projects such as a Very Deep and Fast time domain survey. The goal is to make LSST data products, including a relational database of about 32 trillion observations of 40 billion objects, available to the public and scientists around the world.

astro-ph↗

arXiv2013

Gemini multi-conjugate adaptive optics system review I: Design, trade-offs and integration

The Gemini Multi-conjugate adaptive optics System (GeMS) at the Gemini South telescope in Cerro Pach{ó}n is the first sodium-based multi-Laser Guide Star (LGS) adaptive optics system. It uses five LGSs and two deformable mirrors to measure and compensate for atmospheric distortions. The GeMS project started in 1999, and saw first light in 2011. It is now in regular operation, producing images close to the diffraction limit in the near infrared, with uniform quality over a field of view of two square arcminutes. The present paper (I) is the first one in a two-paper review of GeMS. It describes the system, explains why and how it was built, discusses the design choices and trade-offs, and presents the main issues encountered during the course of the project. Finally, we briefly present the results of the system first light.

astro-ph.IM↗