arXiv subjects

Felix V. E. Hensling

Publications and source records attributed to Felix V. E. Hensling.

7 recordsLinked to original sources

arXiv2026

Synthesis of epitaxial TaO$_2$ thin films on Al$_2$O$_3$ by suboxide molecular-beam epitaxy and thermal laser epitaxy

Tantalum dioxide (TaO2) is a metastable tantalum compound. Here, we report the epitaxial stabilization of TaO2 on Al2O3 (1-102) (r-plane sapphire) substrates using suboxide molecular-beam epitaxy (MBE) and thermal laser epitaxy (TLE), demonstrating single-oriented, monodomain growth of anisotropically strained thin films. Microstructural investigation is performed using synchrotron X-ray diffraction and scanning transmission electron microscopy. The tetravalent oxidation state of tantalum is confirmed using X-ray absorption and photoemission spectroscopy as well as electron energy-loss spectroscopy. Optical properties are investigated via spectroscopic ellipsometry and reveal a 0.3 eV Mott gap of the tantalum 5d electrons. Density-functional theory and group theoretical arguments are used to evaluate the limited stability of the rutile phase and reveal the potential to unlock a hidden metal-insulator transition concomitant with a structural phase transition to a distorted rutile phase, akin to NbO2. Our work expands the understanding of tantalum oxides and paves the way for their integration into next-generation electronic and photonic devices.

cond-mat.mtrl-sci↗

arXiv2024

Adsorption-controlled Growth of Homoepitaxial c-plane Sapphire Films

Sapphire is a technologically highly relevant material, but it poses many challenges to performing epitaxial thin-film deposition. We have identified and applied the conditions for adsorption-controlled homoepitaxial growth of c-plane sapphire. The films thus grown are atomically smooth, have a controlled termination, and are of outstanding crystallinity. Their chemical purity exceeds that of the substrates. The films exhibit exceptional optical properties such as a single-crystal-like bandgap and a low density of F+ centers.

cond-mat.mtrl-sci↗

arXiv2024

alpha-Ta Films on c-plane Sapphire with Enhanced Microstructure

Superconducting films of alpha-Ta are promising candidates for the fabrication of advanced superconducting qubits. However, alpha-Ta films suffer from many growth-induced structural inadequacies that negatively affect their performance. We have therefore explored a new synthesis method for alpha-Ta films which allows the growth of these films with unprecedented quality. Using this method, high quality alpha-Ta films are deposited at a comparably high substrate temperature of 1150 C. They are single-phase alpha-Ta and have a single out-of-plane (110) orientation. They consist of grains above 2 um that have one of three possible in-plane orientations. As shown by scanning transmission electron microscopy and electron energy loss studies the substrate-film interfaces are sharp with no observable intermixing. The obtained insights into the epitaxial growth of body-centered-cubic films on quasi-hexagonal substrates lay the basis for harnessing the high structural coherence of such films in various applications.

cond-mat.supr-con↗

arXiv2022

Silicon-doped $β$-Ga$_2$O$_3$ films grown at 1 $μ$m/h by suboxide molecular-beam epitaxy

We report the use of suboxide molecular-beam epitaxy (S-MBE) to grow $β$-Ga$_2$O$_3$ at a growth rate of ~1 $μ$m/h with control of the silicon doping concentration from 5x10$^{16}$ to 10$^{19}$ cm$^{-3}$. In S-MBE, pre-oxidized gallium in the form of a molecular beam that is 99.98\% Ga$_2$O, i.e., gallium suboxide, is supplied. Directly supplying Ga2O to the growth surface bypasses the rate-limiting first step of the two-step reaction mechanism involved in the growth of $β$-Ga$_2$O$_3$ by conventional MBE. As a result, a growth rate of ~1 $μ$m/h is readily achieved at a relatively low growth temperature (T$_{sub}$ = 525 $^\circ$C), resulting in films with high structural perfection and smooth surfaces (rms roughness of < 2 nm on ~1 $μ$m thick films). Silicon-containing oxide sources (SiO and SiO$_2$) producing an SiO suboxide molecular beam are used to dope the $β$-Ga$_2$O$_3$ layers. Temperature-dependent Hall effect measurements on a 1 $μ$m thick film with a mobile carrier concentration of 2.7x10$^{17}$ cm$^{-3}$ reveal a room-temperature mobility of 124 cm$^2$ V$^{-1}$ s$^{-1}$ that increases to 627 cm$^2$ V$^{-1}$ s$^{-1}$ at 76 K; the silicon dopants are found to exhibit an activation energy of 27 meV. We also demonstrate working MESFETs made from these silicon-doped $β$-Ga$_2$O$_3$ films grown by S-MBE at growth rates of ~1 $μ$m/h.

cond-mat.mtrl-sci↗

arXiv2021

Extending the kinetic and thermodynamic limits of molecular-beam epitaxy utilizing suboxide sources or metal-oxide catalyzed epitaxy

We observe a catalytic mechanism during the growth of III-O and IV-O materials by suboxide molecular-beam epitaxy ($S$-MBE). By supplying the molecular catalysts In$_2$O and SnO we increase the growth rates of Ga$_2$O$_3$ and In$_2$O$_3$. This catalytic action is explained by a metastable adlayer $A$, which increases the reaction probability of the reactants Ga$_2$O and In$_2$O with active atomic oxygen, leading to an increase of the growth rates of Ga$_2$O$_3$ and In$_2$O$_3$. We derive a model for the growth of binary III-O and IV-O materials by $S$-MBE and apply these findings to a generalized catalytic description for metal-oxide catalyzed epitaxy (MOCATAXY), applicable to elemental and molecular catalysts. We derive a mathematical description of $S$-MBE and MOCATAXY providing a computational framework to set growth parameters in previously inaccessible kinetic and thermodynamic growth regimes when using the aforementioned catalysis. Our results indicate MOCATAXY takes place with a suboxide catalyst rather than with an elemental catalyst. As a result of the growth regimes achieved, we demonstrate a Ga$_2$O$_3$/Al$_2$O$_3$ heterostructure with unrivaled crystalline quality, paving the way to the preparation of oxide device structures with unprecedented perfection.

cond-mat.mtrl-sci↗

arXiv2020

Adsorption-Controlled Growth of Ga2O3 by Suboxide Molecular-Beam Epitaxy

This paper introduces a growth method---suboxide molecular-beam epitaxy (S-MBE)---which enables the growth of Ga2O3 and related materials at growth rates exceeding 1 micrometer per hours with excellent crystallinity in an adsorptioncontrolled regime. Using a Ga + Ga2O3 mixture with an oxygen mole fraction of x(O) = 0.4 as an MBE source, we overcome kinetic limits that had previously hampered the adsorption-controlled growth of Ga2O3 by MBE. We present growth rates up to 1.6 micrometer per hour for Ga2O3--Al2O3 heterostructures with unprecedented crystalline quality and also at unparalleled low growth temperature for this level of perfection. We combine thermodynamic knowledge of how to create molecular-beams of targeted suboxides with a kinetic model developed for the S-MBE of III-VI compounds to identify appropriate growth conditions. Using S-MBE we demonstrate the growth of phase-pure, smooth, and high-purity homoepitaxial Ga2O3 films that are thicker than 4 micrometer. With the high growth rate of S-MBE we anticipate a significant improvement to vertical Ga2O3-based devices. We describe and demonstrate how this growth method can be applied to a wide-range of oxides. S-MBE rivals leading synthesis methods currently used for the production of Ga2O3-based devices.

cond-mat.mtrl-sci↗

arXiv2019

SrTiO$_3$ termination control: A method to tailor the oxygen exchange kinetics

We provide insights into the influence of surface termination on the oxygen vacancy incorporation for the perovskite model material SrTiO3 during annealing in reducing gas environments. We present a novel approach to control to tailor the oxygen vacancy formation by controlling the termination. We prove that a SrO-termination can inhibit the incorporation of oxygen vacancies across the (100)-surface and apply this to control their incorporation during thin film growth. Utilizing the conducting interface between LaAlO3 and SrTiO3, we could tailor the oxygen-vacancy based conductivity contribution by the level of SrO termination at the interface.

cond-mat.mtrl-sci↗