arXiv subjects

Feng Liu

Publications and source records attributed to Feng Liu.

At least 559 records · Page 31Linked to original sources

arXiv2020

xQSM: Quantitative Susceptibility Mapping with Octave Convolutional and Noise Regularized Neural Networks

Quantitative susceptibility mapping (QSM) is a valuable magnetic resonance imaging (MRI) contrast mechanism that has demonstrated broad clinical applications. However, the image reconstruction of QSM is challenging due to its ill-posed dipole inversion process. In this study, a new deep learning method for QSM reconstruction, namely xQSM, was designed by introducing modified state-of-the-art octave convolutional layers into the U-net backbone. The xQSM method was compared with recentlyproposed U-net-based and conventional regularizationbased methods, using peak signal to noise ratio (PSNR), structural similarity (SSIM), and region-of-interest measurements. The results from a numerical phantom, a simulated human brain, four in vivo healthy human subjects, a multiple sclerosis patient, a glioblastoma patient, as well as a healthy mouse brain showed that the xQSM led to suppressed artifacts than the conventional methods, and enhanced susceptibility contrast, particularly in the ironrich deep grey matter region, than the original U-net, consistently. The xQSM method also substantially shortened the reconstruction time from minutes using conventional iterative methods to only a few seconds.

eess.IV↗

arXiv2020

Trapping and acceleration of spin-polarized positrons from $γ$ photon splitting in wakefields

Energetic spin-polarized positrons are extremely demanded for forefront researches, such as $e^- e^+$ collider physics, but making compact positron sources is still very challenging. Here we put forward an efficient scheme of trapping and acceleration of polarized positrons in plasma wakefields. Seed electrons colliding with a bichromatic laser create polarized $γ$ photons which then split into $e^- e^+$ pairs via nonlinear Breit-Wheeler process with an average (partial) positron polarization above 30\% (70\%). Over 70\% positrons are trapped and accelerated in recovered wakefields driven by a hollow electron beam, obtaining an energy gain of 3.5 GeV/cm with slight depolarization. This scheme provides a potential for constructing compact and economical positron sources for future applications.

physics.plasm-ph↗

arXiv2020

Learning Implicit Functions for Topology-Varying Dense 3D Shape Correspondence

The goal of this paper is to learn dense 3D shape correspondence for topology-varying objects in an unsupervised manner. Conventional implicit functions estimate the occupancy of a 3D point given a shape latent code. Instead, our novel implicit function produces a part embedding vector for each 3D point, which is assumed to be similar to its densely corresponded point in another 3D shape of the same object category. Furthermore, we implement dense correspondence through an inverse function mapping from the part embedding to a corresponded 3D point. Both functions are jointly learned with several effective loss functions to realize our assumption, together with the encoder generating the shape latent code. During inference, if a user selects an arbitrary point on the source shape, our algorithm can automatically generate a confidence score indicating whether there is a correspondence on the target shape, as well as the corresponding semantic point if there is one. Such a mechanism inherently benefits man-made objects with different part constitutions. The effectiveness of our approach is demonstrated through unsupervised 3D semantic correspondence and shape segmentation.

cs.CV↗

arXiv2020

On the Detection of Digital Face Manipulation

Detecting manipulated facial images and videos is an increasingly important topic in digital media forensics. As advanced face synthesis and manipulation methods are made available, new types of fake face representations are being created which have raised significant concerns for their use in social media. Hence, it is crucial to detect manipulated face images and localize manipulated regions. Instead of simply using multi-task learning to simultaneously detect manipulated images and predict the manipulated mask (regions), we propose to utilize an attention mechanism to process and improve the feature maps for the classification task. The learned attention maps highlight the informative regions to further improve the binary classification (genuine face v. fake face), and also visualize the manipulated regions. To enable our study of manipulated face detection and localization, we collect a large-scale database that contains numerous types of facial forgeries. With this dataset, we perform a thorough analysis of data-driven fake face detection. We show that the use of an attention mechanism improves facial forgery detection and manipulated region localization.

cs.CV↗

arXiv2020

Density-independent plasmons for terahertz-stable topological metamaterials

To efficiently integrate cutting-edge terahertz technology into compact devices, the highly confined terahertz plasmons are attracting intensive attentions. Compared to plasmons at visible frequencies in metals, terahertz plasmons, typically in lightly doped semiconductors or graphene, are sensitive to carrier density (n) and thus have an easy tunability, which, however, leads to unstable or imprecise terahertz spectra. By deriving a simplified but universal form of plasmon frequencies, here we reveal a unified mechanism for generating unusual n-independent plasmons (DIPs) in all topological states with different dimensions. Remarkably, we predict that terahertz DIPs can be excited in 2D nodal-line and 1D nodal-point systems, confirmed by the first-principles calculations on almost all existing topological semimetals with diverse lattice symmetries. Besides of n independence, the feature of Fermi-velocity and degeneracy-factor dependences in DIPs can be applied to design topological superlattice and multi-walled carbon nanotube metamaterials for broadband terahertz spectroscopy and quantized terahertz plasmons, respectively. Surprisingly, high spatial confinement and quality factor, also insensitive to n, can be simultaneously achieved in these terahertz DIPs. Our findings pave the way to developing topological plasmonic devices for stable terahertz applications.

physics.optics↗

arXiv2020

Prediction of intrinsic topological superconductivity in Mn-doped GeTe monolayer from first-principles

Recent discovery of topological superconductors (TSCs) has sparked enormous interest. Realization of TSC requires a delicate tuning of multiple microscopic parameters, which remains a great challenge. Here, we develop a first-principles approach to quantify realistic conditions of TSC by solving self-consistently Bogoliubov-de Gennes equation based on Wannier function construction of band structure, in presence of Rashba spin-orbit coupling, Zeeman splitting and electron-phonon coupling. We further demonstrate the power of this new method by predicting the Mn-doped GeTe (Ge$_{1-x}$Mn$_x$Te) monolayer - a well-known dilute magnetic semiconductor showing superconductivity under hole doping - to be a Class D TSC with Chern number of -1 and chiral Majorana edge modes. By constructing a first-principles phase diagram in the parameter space of temperature and Mn concentration, we propose the TSC phase can be induced at a lower-limit transition temperature of ~40 mK and the Mn concentration of $x$~0.015%. Our approach can be generally applied to TSCs with a phonon-mediated pairing, providing useful guidance for future experiments.

cond-mat.supr-con↗

arXiv2020

Open Set Domain Adaptation: Theoretical Bound and Algorithm

The aim of unsupervised domain adaptation is to leverage the knowledge in a labeled (source) domain to improve a model's learning performance with an unlabeled (target) domain -- the basic strategy being to mitigate the effects of discrepancies between the two distributions. Most existing algorithms can only handle unsupervised closed set domain adaptation (UCSDA), i.e., where the source and target domains are assumed to share the same label set. In this paper, we target a more challenging but realistic setting: unsupervised open set domain adaptation (UOSDA), where the target domain has unknown classes that are not found in the source domain. This is the first study to provide a learning bound for open set domain adaptation, which we do by theoretically investigating the risk of the target classifier on unknown classes. The proposed learning bound has a special term, namely open set difference, which reflects the risk of the target classifier on unknown classes. Further, we present a novel and theoretically guided unsupervised algorithm for open set domain adaptation, called distribution alignment with ppen difference (DAOD), which is based on regularizing this open set difference bound. The experiments on several benchmark datasets show the superior performance of the proposed UOSDA method compared with the state-of-the-art methods in the literature.

cs.LG↗

arXiv2020

Learned Dual-View Reflection Removal

Traditional reflection removal algorithms either use a single image as input, which suffers from intrinsic ambiguities, or use multiple images from a moving camera, which is inconvenient for users. We instead propose a learning-based dereflection algorithm that uses stereo images as input. This is an effective trade-off between the two extremes: the parallax between two views provides cues to remove reflections, and two views are easy to capture due to the adoption of stereo cameras in smartphones. Our model consists of a learning-based reflection-invariant flow model for dual-view registration, and a learned synthesis model for combining aligned image pairs. Because no dataset for dual-view reflection removal exists, we render a synthetic dataset of dual-views with and without reflections for use in training. Our evaluation on an additional real-world dataset of stereo pairs shows that our algorithm outperforms existing single-image and multi-image dereflection approaches.

cs.CV↗

arXiv2020

Prediction of giant and ideal Rashba-type splitting in ordered alloy monolayers grown on a polar surface

A large and ideal Rashba-type spin-orbit splitting is desired for the applications of materials in spintronic devices and the detection of Majorana Fermions in solids. Here, we propose an approach to achieve giant and ideal spin-orbit splittings through a combination of ordered surface alloying and interface engineering, that is, growing alloy monolayers on an insulating polar surface. We illustrate this unique strategy by means of first-principles calculations of buckled hexagonal monolayers of SbBi and PbBi supported on Al$_2$O$_3$(0001). Both systems display ideal Rashba-type states with giant SO splittings, characterized with energy offsets over 600 meV and momentum offsets over 0.3 $Å^{-1}$, respectively. Our study thus points to an effective way of tuning spin-orbit splitting in low-dimensional materials to draw immediate experimental interest.

cond-mat.mtrl-sci↗

arXiv2020

Higher-order topology in monolayer graphene

We show that monolayer graphene intrinsically hosts higher-order topological corner states, in which electrons are localized topologically at atomic sizes. The emergence of the topological corner states in graphene is due to a nontrivial product of the Zak phases for two independent directions, which can be handily calculated graphically by using the bulk wavefunctions. We give an explicit expression that indicates the existence of topological corner states for various geometric edges and corner angles. We also demonstrate the nontrivial localization nature of the topological corner states in graphene by putting an imaginary onsite potential mask.

cond-mat.mes-hall↗

arXiv2020

Observation of photon antibunching with a single conventional detector

The second-order photon correlation function is of great importance in quantum optics which is typically measured with the Hanbury Brown and Twiss interferometer which employs a pair of single-photon detectors and a dual-channel time acquisition module. Here we demonstrate a new method to measure and extract the second-order correlation function with a standard single-photon avalanche photodiode (dead-time = 22 ns) and a single-channel time acquisition module. This is realized by shifting the informative coincidence counts near the zero-time delay to a time window which is not obliterated by the dead-time and after-pulse of detection system. The new scheme is verified by measuring the second-order correlation from a single colloidal nanocrystal. Photon antibunching is unambiguously observed and agrees well with the result measured using the standard HBT setup. Our scheme simplifies the higher-order correlation technique and might be favored in cost-sensitive circumstances.

quant-ph↗

arXiv2020

Learning from a Complementary-label Source Domain: Theory and Algorithms

In unsupervised domain adaptation (UDA), a classifier for the target domain is trained with massive true-label data from the source domain and unlabeled data from the target domain. However, collecting fully-true-label data in the source domain is high-cost and sometimes impossible. Compared to the true labels, a complementary label specifies a class that a pattern does not belong to, hence collecting complementary labels would be less laborious than collecting true labels. Thus, in this paper, we propose a novel setting that the source domain is composed of complementary-label data, and a theoretical bound for it is first proved. We consider two cases of this setting, one is that the source domain only contains complementary-label data (completely complementary unsupervised domain adaptation, CC-UDA), and the other is that the source domain has plenty of complementary-label data and a small amount of true-label data (partly complementary unsupervised domain adaptation, PC-UDA). To this end, a complementary label adversarial network} (CLARINET) is proposed to solve CC-UDA and PC-UDA problems. CLARINET maintains two deep networks simultaneously, where one focuses on classifying complementary-label source data and the other takes care of source-to-target distributional adaptation. Experiments show that CLARINET significantly outperforms a series of competent baselines on handwritten-digits-recognition and objects-recognition tasks.

cs.LG↗

arXiv2020

Quasibound states in the continuum in terahertz free-standing metal complementary periodic cross-shaped resonators

We numerically and experimentally achieve quasi-bound states in the continuums (BICs) with high-Q factors in the free-standing metal complementary periodic cross-shaped resonators (CPCRs) at terahertz (THz) frequencies. Such induced quasi-BICs arises from the breaking of the mirror symmetry of CPCRs. By properly tuning the asymmetric factor, the measured Q factor of quasi-BIC can reach 102, which is lower than the simulated Q factor of 166 due to the limited system resolutions. We also simulate the electric field magnitude and vector distributions at the quasi-BICs, where the out-phase alignment between the electric dipoles is found. The sharp quasi-BICs realized in this thin free-standing metal structure may immediately boost the performance of filters and sensors in terahertz wave manipulation or biomolecular sensing.

physics.optics↗

arXiv2020

Honeycomb-Lattice Mott insulator on Tantalum Disulphide

Effects of electron many-body interactions amplify in an electronic system with a narrow bandwidth opening a way to exotic physics. A narrow band in a two-dimensional (2D) honeycomb lattice is particularly intriguing as combined with Dirac bands and topological properties but the material realization of a strongly interacting honeycomb lattice described by the Kane-Mele-Hubbard model has not been identified. Here we report a novel approach to realize a 2D honeycomb-lattice narrow-band system with strongly interacting 5$d$ electrons. We engineer a well-known triangular lattice 2D Mott insulator 1T-TaS$_2$ into a honeycomb lattice utilizing an adsorbate superstructure. Potassium (K) adatoms at an optimum coverage deplete one-third of the unpaired $d$ electrons and the remaining electrons form a honeycomb lattice with a very small hopping. Ab initio calculations show extremely narrow Z$_2$ topological bands mimicking the Kane-Mele model. Electron spectroscopy detects an order of magnitude bigger charge gap confirming the substantial electron correlation as confirmed by dynamical mean field theory. It could be the first artificial Mott insulator with a finite spin Chern number.

cond-mat.str-el↗

arXiv2020

Fast Monte Carlo Simulation of Dynamic Power Systems Under Continuous Random Disturbances

Continuous-time random disturbances from the renewable generation pose a significant impact on power system dynamic behavior. In evaluating this impact, the disturbances must be considered as continuous-time random processes instead of random variables that do not vary with time to ensure accuracy. Monte Carlo simulation (MCs) is a nonintrusive method to evaluate such impact that can be performed on commercial power system simulation software and is easy for power utilities to use, but is computationally cumbersome. Fast samplings methods such as Latin hypercube sampling (LHS) have been introduced to speed up sampling random variables, but yet cannot be applied to sample continuous disturbances. To overcome this limitation, this paper proposes a fast MCs method that enables the LHS to speed up sampling continuous disturbances, which is based on the Itô process model of the disturbances and the approximation of the Itô process by functions of independent normal random variables. A case study of the IEEE 39-Bus System shows that the proposed method is 47.6 and 6.7 times faster to converge compared to the traditional MCs in evaluating the expectation and variance of the system dynamic response.

math.OC↗

arXiv2020

Nonintrusive Uncertainty Quantification of Dynamic Power Systems Subject to Stochastic Excitations

Continuous-time random disturbances (also called stochastic excitations) due to increasing renewable generation have an increasing impact on power system dynamics; However, except from the Monte Carlo simulation, most existing methods for quantifying this impact are intrusive, meaning they are not based on commercial simulation software and hence are difficult to use for power utility companies. To fill this gap, this paper proposes an efficient and nonintrusive method for quantifying uncertainty in dynamic power systems subject to stochastic excitations. First, the Gaussian or non-Gaussian stochastic excitations are modeled with an Itô process as stochastic differential equations. Then, the Itô process is spectrally represented by independent Gaussian random parameters, which enables the polynomial chaos expansion (PCE) of the system dynamic response to be calculated via an adaptive sparse probabilistic collocation method. Finally, the probability distribution and the high-order moments of the system dynamic response and performance index are accurately and efficiently quantified. The proposed nonintrusive method is based on commercial simulation software such as PSS/E with carefully designed input signals, which ensures ease of use for power utility companies. The proposed method is validated via case studies of IEEE 39-bus and 118-bus test systems.

math.OC↗

arXiv2020

Global optimization using mixed integer quadratic programming on non-convex two-way interaction truncated linear multivariate adaptive regression splines

Multivariate adaptive regression splines (MARS) is a flexible statistical modeling method that has been popular for data mining applications. MARS has also been employed to approxmiate unknown relationships in optimzation for complex systems, including surrogate optimization, dynamic programming, and two-stage stochastic programming. Given the increasing desire to optimize real world systems, this paper presents an approach to globally optimize a MARS model that allows up to two-way interaction terms that are products of truncated linear univariate functions (TITL-MARS). Specifally, such a MARS model consists of linear and quadratic structure. This structure is exploited to formulate a mixed integer quadratic programming problem (TITL-MARS-OPT). To appreciate the contribution of TITL-MARS-OPT, one must recognize that popular heurstic optimization approaches, such as evolutionary algorithms, do not guarantee global optimality and can be computationally slow. The use of MARS maintains the flexibility of modeling within TITL-MARS-OPT while also taking advantage of the linear modeling structure of MARS to enable global optimality. Computational results compare TITL-MARS-OPT with a genetic algorithm for two types of cases. First, a wind farm power distribution case study is described and then other TITL-MARS forms are tested. The results show the superiority of TITL-MARS-OPT over the genetic algorithm in both accuracy and computational time.

math.OC↗

arXiv2020

Optimal Configuration of Wind-to-Ammonia with the Electric Network and Hydrogen Supply Chain: A Case Study of Inner Mongolia

Converting wind energy into ammonia (WtA) has been recognized as a promising pathway to enhance the usage of wind generation. This paper proposes a generic optimal configuration model of WtA at the network level to minimize the ammonia production cost by optimizing capacities and locations of WtA facilities including wind turbines, electrolyzers, hydrogen tanks and optimizing supply modes among regions. Specifically, the temporal fluctuation characteristics of wind resources, the operation flexibility of the ammonia synthesis reactor and the transport distances are considered. Three typical supply modes, i.e., the Local WtA, the EN (electric network)-based WtA and the HSC (hydrogen supply chain)-based WtA, combined with two energy transport modes including EN and HT (Hydrogen truck trailers) are included with the consideration of the maximal energy transport capacity of EN and transport distance per day of HT (500km). Real data of Inner Mongolia (a typical province in China with rich wind resources and existing ammonia industries) is employed to verify the effectiveness and significance of proposed model. The effect of above significant factors on optimal planning capacity of WtA facilities and optimal energy transport modes is analyzed, which provides guidelines for WtA configuration. The economic analysis shows that the average LCOA (levelized cost of ammonia) for WtA is approximately 0.57 euro/kg in Inner Mongolia and comparable to that for CtA (coal-to-ammonia, 0.41 euro/kg) with a reduction of 30% in capacity cost of the facilities.

eess.SY↗