arXiv subjects

Ferdi Kara

Publications and source records attributed to Ferdi Kara.

At least 19 recordsLinked to original sources

arXiv2026

HAPS-RIS or HAPS-Relay: Which Outperforms Under Impairments with NOMA in 6G NTN?

This paper investigates the performance of high-altitude platform station (HAPS)-assisted communication systems employing either reconfigurable intelligent surfaces (RIS) or relay stations (RS) under non-orthogonal multiple access (NOMA) scheme. Practical system impairments, including hardware impairments (HWI) and imperfect channel state information (CSI), are explicitly considered. The results show that HAPS-RIS outperforms HAPS-RS in terms of both sum-rate and energy efficiency under non-ideal conditions due to its passive nature, which avoids noise amplification. Furthermore, it is demonstrated that RIS element allocation and user spatial distribution significantly impact NOMA performance, where increased user separation and proper allocation enhance channel disparity and improve system efficiency. Despite its higher sensitivity to imperfect CSI, HAPS-RIS can effectively compensate for performance degradation through large-scale RIS element deployment, maintaining a performance advantage over half-duplex RS-based systems. These insights provide useful design guidelines for impairment-aware HAPS-assisted 6G communication systems.

cs.NI↗

arXiv2026

Two-Tier High Altitude Platform Stations (HAPS) for Exploring Wireless Energy Harvesting

In sixth-generation (6G) cellular networks and beyond, aerial platforms, such as uncrewed aerial vehicles (UAVs) and high-altitude platform stations (HAPS), are anticipated to play a crucial role in enhancing connectivity, expanding network coverage, and supporting advanced communication services. However, the deployment of energy-efficient onboard communication systems is essential for their widespread adoption and effectiveness. The integration of energy harvesting (EH) into aerial platforms is envisioned to be pivotal in promoting both energy and cost efficiency. In this paper, we propose a new paradigm for aerial platforms in which they can collect energy from the transmitted signals of nearby aerial platforms. The paper employs a two-tier architecture with HAPS super-macro base stations (HAPS-SMBS) system: regular HAPS-SMBS nodes serve as base stations, while a "mother" HAPS-SMBS node acts as a manager to coordinate communications between regular HAPS-SMBS and the ground station, thus enabling wireless energy transfer. Specifically, we analyze the characteristics of EH-enabled HAPS-SMBS and compare their performance with those without EH. Additionally, we derive the optimal regular HAPS-SMBS positioning to mitigate signal attenuation and power loss. Subsequently, we formulate a joint optimization problem for regular HAPS-SMBS positioning and the EH factor. We solve the problem using the iterative distance and EH factor algorithm (IDFA); however, we employ $Q$-learning to verify its effectiveness. Our findings indicate that, compared to conventional EH systems, IDFA and $Q$-learning exhibit higher data rate performance. In contrast, $Q$-learning outperforms IDFA systems in linear modelswith intensive training in approximating optimal values. Furthermore, maximizing transmit power achieves higher gains than systems without EH.

eess.SP↗

arXiv2026

HAPS-RIS-assisted IoT Networks for Disaster Recovery and Emergency Response: Architecture, Application Scenarios, and Open Challenges

Reliable and resilient communication is essential for disaster recovery and emergency response, yet terrestrial infrastructure often fails during large-scale natural disasters. This paper proposes a High-Altitude Platform Station (HAPS) and Reconfigurable Intelligent Surfaces (RIS)-assisted Internet of Things (IoT) communication system to restore connectivity in disaster-affected areas. Distributed IoT sensors collect critical environmental data and forward it to nearby gateways via short-range links, while the HAPS-RIS system provides backhaul to these gateways. To overcome the severe double path loss of passive RIS at high altitudes, we propose a dynamically adjustable sub-connected active RIS architecture that can reconfigure the number of elements connected to each power amplifier through switching mechanisms. Simulation results demonstrate substantial gains in downlink and uplink data rates, as well as system energy efficiency, compared with conventional passive RIS schemes. Moreover, a 1 dB increase in ground-station transmit power yields approximately 20-30 Mbps improvement in gateway data rates. These findings confirm that HAPS-RIS technology offers an effective and energy-efficient approach for resilient IoT backhaul in 6G non-terrestrial networks, particularly in line-of-sight (LoS)-dominant HAPS-ground backhaul scenarios.

cs.NI↗

arXiv2025

On the Trade-Off Between Sum-Rate and Energy Efficiency through the Convergence of HAPS and Active RIS Technologies

This paper investigates the integration of active reconfigurable intelligent surfaces (RIS) relay with high-altitude platform stations (HAPS) to enhance non-terrestrial network (NTN) performance in next-generation wireless systems. While prior studies focused on passive RIS architectures, the severe path loss and double fading in long-distance HAPS links make active RIS a more suitable alternative due to its inherent signal amplification capabilities. We formulate a sum-rate maximization problem to jointly optimize power allocation and RIS element assignment for ground user equipments (UEs) supported by a HAPS-based active RIS-assisted communication system. To reduce power consumption and hardware complexity, several sub-connected active RIS architectures are also explored. Simulation results reveal that active RIS configurations significantly outperform passive RIS in terms of quality of service (QoS). Moreover, although fully-connected architectures achieve the highest throughput, sub-connected schemes demonstrate superior energy efficiency under practical power constraints. These findings highlight the potential of active RIS-enabled HAPS systems to meet the growing demands of beyond-cellular coverage and green networking.

cs.NI↗

arXiv2025

On-Demand HAPS-Assisted Communication System for Public Safety in Emergency and Disaster Response

Natural disasters often disrupt communication networks and severely hamper emergency response and disaster management. Existing solutions, such as portable communication units and cloud-based network architectures, have improved disaster resilience but fall short if both the Radio Access Network (RAN) and backhaul infrastructure become inoperable. To address these challenges, we propose a demand-driven communication system supported by High Altitude Platform Stations (HAPS) to restore communication in an affected area and enable effective disaster relief. The proposed emergency response network is a promising solution as it provides a rapidly deployable, resilient communications infrastructure. The proposed HAPS-based communication can play a crucial role not only in ensuring connectivity for mobile users but also in restoring backhaul connections when terrestrial networks fail. As a bridge between the disaster management center and the affected areas, it can facilitate the exchange of information in real time, collect data from the affected regions, and relay crucial updates to emergency responders. Enhancing situational awareness, coordination between relief agencies, and ensuring efficient resource allocation can significantly strengthen disaster response capabilities. In this paper, simulations show that HAPS with hybrid optical/THz links boosts backhaul capacity and resilience, even in harsh conditions. HAPS-enabled RAN in S- and Ka-bands ensures reliable communication for first responders and disaster-affected populations. This paper also explores the integration of HAPS into emergency communication frameworks and standards, as it has the potential to improve network resilience and support effective disaster management.

cs.NI↗

arXiv2025

Near-Field SWIPT with gMIMO in the Upper Mid-Band: Opportunities, Challenges, and the Way Forward

This paper explores the integration of simultaneous wireless information and power transfer (SWIPT) with gigantic multiple-input multiple-output (gMIMO) technology operating in the upper mid-band frequency range (7-24 GHz). The near-field propagation achieved by gMIMO introduces unique opportunities for energy-efficient, high-capacity communication systems that cater to the demands of 6G wireless networks. Exploiting spherical wave propagation, near-field SWIPT with gMIMO enables precise energy and data delivery, enhancing spectral efficiency through beam focusing and massive spatial multiplexing. This paper discusses theoretical principles, design challenges, and enabling solutions, including advanced channel estimation techniques, precoding strategies, and dynamic array configurations such as sparse and modular arrays. Through analytical insights and a case study, this paper demonstrates the feasibility of achieving optimized energy harvesting and data throughput in dense and dynamic environments. These findings contribute to advancing energy-autonomous Internet-of-Everything (IoE) deployments, smart factory networks, and other energy-autonomous applications aligned with the goals of next-generation wireless technologies.

eess.SP↗

arXiv2025

A Multi-layer Non-Terrestrial Networks Architecture for 6G and Beyond under Realistic Conditions and with Practical Limitations

In order to bolster the next generation of wireless networks, there has been a great deal of interest in non-terrestrial networks (NTN), including satellites, high altitude platform stations (HAPS), and uncrewed aerial vehicles (UAV). To unlock their full potential, these platforms can integrate advanced technologies such as reconfigurable intelligent surfaces~(RIS) and next-generation multiple access (NGMA). However, in practical applications, transceivers often suffer from radio frequency (RF) impairments, which limit system performance. In this regard, this paper explores the potential of multi-layer NTN architecture to mitigate path propagation loss and improve network performance under hardware impairment limitations. First, we present current research activities in the NTN framework, including RIS, multiple access technologies, and hardware impairments. Next, we introduce a multi-layer NTN architecture with hardware limitations. This architecture includes HAPS super-macro base stations (HAPS-SMBS), UAVs--equipped with passive or active transmissive RIS--, and NGMA techniques, like non-orthogonal multiple access (NOMA), as the multiple access techniques to serve terrestrial devices. Additionally, we present and discuss potential use cases of the proposed multi-layer architecture considering hardware impairments. The multi-layer NTN architecture combined with advanced technologies, such as RIS and NGMA, demonstrates promising results; however, the performance degradation is attributed to RF impairments. Finally, we identify future research directions, including RF impairment mitigation, UAV power management, and antenna designs.

eess.SP↗

arXiv2024

Solutions for Sustainable and Resilient Communication Infrastructure in Disaster Relief and Management Scenarios

As natural disasters become more frequent and severe, ensuring a resilient communications infrastructure is of paramount importance for effective disaster response and recovery. This disaster-resilient infrastructure should also respond to sustainability goals by providing an energy-efficient and economically feasible network that is accessible to everyone. This paper provides a comprehensive exploration of the technological solutions and strategies necessary to build and maintain resilient communications networks that can withstand and quickly recover from disaster scenarios. The paper starts with a survey of existing literature and related reviews to establish a solid foundation, followed by an overview of the global landscape of disaster communications and power supply management. We then introduce the key enablers of communications and energy resource technologies to support communications infrastructure, examining emerging trends that improve the resilience of these systems. Pre-disaster planning is emphasized as a critical phase where proactive communication and energy supply strategies can significantly mitigate the impact of disasters. We explore the essential technologies for disaster response, focusing on real-time communications and energy solutions that support rapid deployment and coordination in times of crisis. The paper presents post-disaster communication and energy management planning for effective rescue and evacuation operations. The main findings derived from the comprehensive survey are also summarized for each disaster phase. This is followed by an analysis of existing vendor products and services as well as standardization efforts and ongoing projects that contribute to the development of resilient infrastructures. A detailed case study of the Turkiye earthquakes is presented to illustrate the practical application of these technologies and strategies.

cs.NI↗

arXiv2024

Reconfigurable Intelligent Surfaces in Upper Mid-Band 6G Networks: Gain or Pain?

Reconfigurable intelligent surfaces (RISs) have emerged as one of the most studied topics in recent years, hailed as a transformative technology with the potential to revolutionize future wireless systems. While RISs are recognized for their ability to enhance spectral efficiency, coverage, and the reliability of wireless channels, several challenges remain. Notably, convincing and profitable use cases must be developed before widespread commercial deployment can be realized. The first sixth-generation (6G) networks will most likely utilize upper mid-band frequencies (i.e., 7-24\,GHz). This is regarded as the \textit{golden band} since it combines good coverage, much new spectrum, and enables many antennas in compact form factors. There has been much prior work on channel modeling, coexistence, and possible implementation scenarios for these bands. There are significant frequency-specific challenges related to RIS deployment, use cases, number of required elements, channel estimation, and control. These are previously unaddressed for the upper mid-band. In this paper, we aim to bridge this gap by exploring various use cases, including RIS-assisted fixed wireless access (FWA), enhanced capacity in mobile communications, and increased reliability at the cell edge. We identify the conditions under which RIS can provide major benefits and optimal strategies for deploying RIS to enhance the performance of 6G upper mid-band communication systems.

cs.NI↗

arXiv2024

Enabling 6G Performance in the Upper Mid-Band by Transitioning From Massive to Gigantic MIMO

The initial 6G networks will likely operate in the upper mid-band (7-24 GHz), which has decent propagation conditions but underwhelming new spectrum availability. In this paper, we explore whether we can anyway reach the ambitious 6G performance goals by evolving the multiple-input multiple-output (MIMO) technology from massive in 5G to gigantic in 6G. We describe how many antennas are needed to reach the envisioned 6G peak user rates, how many can realistically be deployed in practical radio equipment, and what the practical spatial degrees-of-freedom might become. We further suggest a new deployment strategy that enables the utilization of radiative near-field effects in these bands for precise beamfocusing, localization, and sensing from a single base station site. Finally, we identify open research and standardization challenges that must be overcome to efficiently use gigantic MIMO dimensions in 6G from hardware, cost, and algorithmic perspectives.

cs.IT↗

arXiv2024

Enhancing Resiliency of Integrated Space-Air-Ground-Sea Networks with Renewable Energies: A Use Case After the 2023 Türkiye Earthquake

Natural disasters can have catastrophic consequences, a poignant example is the series of $7.7$ and $7.6$ magnitude earthquakes that devastated Türkiye on February 6, 2023. To limit the damage, it is essential to maintain the communications infrastructure to ensure individuals impacted by the disaster can receive critical information. The disastrous earthquakes in Türkiye have revealed the importance of considering communications and energy solutions together to build resilient and sustainable infrastructure. Thus, this paper proposes an integrated space-air-ground-sea network architecture that utilizes various communications and energy-enabling technologies. This study aims to contribute to the development of robust and sustainable disaster-response frameworks. In light of the Türkiye earthquakes, two methods for network management are proposed: the first aims to ensure sustainability in the pre-disaster phase and the second aims to maintain communications during the in-disaster phase. In these frameworks, communications technologies such as High Altitude Platform Station(s)(HAPS), which are among the key enablers to unlock the potential of 6G networks, and energy technologies such as Renewable Energy Sources (RES), Battery Energy Storage Systems (BESSs), and Electric Vehicles (EVs) have been used as the prominent technologies. By simulating a case study, we demonstrate the performance of a proposed framework for providing network resiliency. The paper concludes with potential challenges and future directions to achieve a disaster-resilient network architecture solution.

cs.NI↗

arXiv2024

Error Performance Analysis of UAV-Mounted RIS for NOMA Systems with Practical Constraints

Uncrewed aerial vehicles (UAVs) have attracted recent attention for sixth-generation (6G) networks due to their low cost and flexible deployment. In order to maximize the ever-increasing data rates, spectral efficiency, and wider coverage, technologies such as reconfigurable intelligent surface (RIS) and non-orthogonal multiple access (NOMA) are adapted with UAVs (UAV-RIS NOMA). However, the error performance of UAV-RIS NOMA has not been considered, yet. In this letter, we investigate the error probability of UAV-RIS NOMA systems. We also consider the practical constraints of hardware impairments (HWI) at the transceivers, inter-cell interference (ICI), and imperfect successive interference cancellation (SIC). The analytical derivations are validated by Monte-Carlo simulations. Our results demonstrate that our proposed system achieves higher performance gain (more than 5 dB with increasing the number of RIS elements) with less error probability compared to UAVs without RIS. Moreover, it is found that the HWI, ICI, and imperfect SIC have shown a negative impact on the system performance.

eess.SP↗

arXiv2024

Multi-Layer Network Formation through HAPS Base Station and Transmissive RIS-Equipped UAV

In order to bolster future wireless networks, there has been a great deal of interest in non-terrestrial networks, especially aerial platforms including high-altitude platform stations (HAPS) and uncrewed aerial vehicles (UAVs). These platforms can integrate advanced technologies such as reconfigurable intelligent surfaces (RIS) and non-orthogonal multiple access (NOMA). In this regard, this paper proposes a multi-layer network architecture consisting of HAPS and UAV, where the former acts as a HAPS super macro base station (HAPS-SMBS), while the latter serves as a relay node for the ground Internet of Things (IoT) devices. The UAV is equipped with active transmissive RIS, which is a novel technology with promising benefits. We also utilize multiple-input single-output (MISO) technology, i.e., multiple antennas at the HAPS-SMBS and a single antenna at the IoT devices. Additionally, we consider NOMA as the multiple access technology as well as the existence of hardware impairments as a practical limitation. We compare the proposed system model with various scenarios, all involving the HAPS-SMBS and RIS-equipped UAV relay combination, but with different types of RIS, antenna configurations, and access technologies. Sum rate and energy efficiency are used as performance metrics, and the findings demonstrate that, in comparison to all benchmarks, the proposed system yields significant performance gains. Moreover, hardware impairment limits the system performance at high transmit power levels.

eess.SP↗

arXiv2023

Bit-Interleaved Multiple Access: Improved Fairness, Reliability, and Latency for Massive IoT Networks

In this paper, we propose bit-interleaved multiple access (BIMA) to enable Internet-of-Things (IoT) networks where a massive connection is required with limited resource blocks. First, by providing a true power allocation (PA) constraint for conventional NOMA with practical constraints, we demonstrate that it cannot support massive connections. To this end, we propose BIMA where there are no strict PA constraints, unlike conventional NOMA, thus allowing a high number of devices. We provide a comprehensive analytical framework for BIMA for all key performance indicators (KPIs) (i.e., ergodic capacity [EC], outage probability [OP], and bit error rate [BER]). We evaluate Jain's fairness index and proportional fairness index in terms of all KPIs. Based on the extensive computer simulations, we reveal that BIMA outperforms conventional NOMA significantly, with a performance gain of up to 20-30dB. This performance gain becomes greater when more devices are supported. BIMA provides a full diversity order and enables the implementation of an arbitrary number of devices and modulation orders, which is crucial for IoT networks in dense areas. BIMA guarantees a fairness system where none of the devices gets a severe performance and the sum-rate is shared in a fair manner among devices by guarantying QoS satisfaction. Finally, we provide an intense complexity and latency analysis and demonstrate that BIMA provides lower latency compared to conventional NOMA since it allows parallel computing at the receivers and no iterative operations are required. We show that BIMA reduces latency by up to 350\% for specific devices and 170\% on average.

cs.IT↗

arXiv2023

Sustaining Dynamic Traffic in Dense Urban Areas with High Altitude Platform Stations (HAPS)

The impact of information and communication technologies on global energy consumption is increasing every year, and mobile networks account for a significant portion of it. More than 50% of the total energy consumption of mobile networks is issued from radio access networks (RANs), due mainly to the rapid penetration of data-intensive applications and the increasing heterogeneity, dynamicity, and unpredictability of traffic. To tackle these high-demanding problems, RAN densification through the installation of additional base stations in high-demand areas is conventionally used. However, this leads to inefficient energy use and over-provisioning issues. In this context, high altitude platform stations (HAPS) may be used to complement RANs and sustain their services in densely populated areas, where traffic can peak unpredictably. Due to their wide coverage areas, substantial communication payloads, and green energy model, HAPS super macro base stations (SMBSs) are capable of handling the massive and dynamic mobile data traffic of ground users. In this paper, we show how HAPS-SMBSs can complement RANs and serve the dynamic and unpredictable traffic demands of users in an energy-efficient manner. Through the simulation of a case study, we demonstrate the performance of a HAPS-SMBS compared to the conventional RAN densification method and analyze the two approaches in terms of sustainability.

cs.NI↗

arXiv2022

A Hybrid Energy Harvesting Protocol for Cooperative NOMA: Error Performance Approach

Cooperative non-orthogonal multiple access (CNOMA) has recently been adapted with energy harvesting (EH) to increase energy efficiency and extend the lifetime of energy-constrained wireless networks. This paper proposes a hybrid EH protocol-assisted CNOMA, which is a combination of the two main existing EH protocols (power splitting (PS) and time switching (TS)). The end-to-end bit error rate (BER) expressions of users in the proposed scheme are obtained over Nakagami-$m$ fading channels. The proposed hybrid EH (HEH) protocol is compared with the benchmark schemes (i.e., existing EH protocols and no EH). Based on the extensive simulations, we reveal that the analytical results match perfectly with simulations which proves the correctness of the derivations. Numerical results also show that the HEH-CNOMA outperforms the benchmarks significantly. In addition, we discuss the optimum value of EH factors to minimize the error probability in HEH-CNOMA and show that an optimum value can be obtained according to channel parameters.

cs.IT↗

arXiv2022

Error Analysis of Cooperative NOMA with Practical Constraints: Hardware-Impairment, Imperfect SIC and CSI

Non-orthogonal multiple access (NOMA) has been a strong candidate to support massive connectivity in future wireless networks. In this regard, its implementation into cooperative relaying, named cooperative-NOMA (CNOMA), has received tremendous attention by researchers. However, most of the existing CNOMA studies have failed to address practical constraints since they assume ideal conditions. Particularly, error performance of CNOMA schemes with imperfections has not been investigated, yet. In this letter, we provide an analytical framework for error performance of CNOMA schemes under practical assumptions where we take into account imperfect successive interference canceler (SIC), imperfect channel estimation (ICSI), and hardware impairments (HWI) at the transceivers. We derive bit error rate (BER) expressions in CNOMA schemes whether the direct links between source and users exist or not which is, to the best of the authors' knowledge, the first study in the open literature. For comparisons, we also provide BER expression for downlink NOMA with practical constraints which has also not been given in literature, yet. The theoretical BER expressions are validated with computer simulations where the perfect-match is observed. Finally, we discuss the effects of the system parameters (e.g., power allocation, HWI level) on the performance of CNOMA schemes to reveal fruitful insights for the society.

cs.IT↗

arXiv2022

Power-Time Channel Diversity (PTCD): A Novel Resource-Efficient Diversity Technique for 6G and Beyond

Diversity techniques have been applied for decades to overcome the effects of fading, which is one of the most challenging problems in wireless communications due to the randomness of the wireless channel. However, existing diversity techniques are resource-inefficient due to orthogonal resource usage, or they have high-power consumption due to multiple antennas and RF-chains which present an insurmountable constraint for small devices. To address this, this letter proposes a novel resource-efficient diversity technique called power-time channel diversity (PTCD). In PTCD, interleaved copies of the baseband symbols are transmitted simultaneously with weighted power coefficients. The PTCD provides a diversity order of the number of copies by implementing successive interference canceler at the receiver. To achieve this diversity, no additional resources are needed; hence, spectral efficient communication is guaranteed. Additionally, the power consumption at the transceivers is limited since the PTCD requires only one RF-chain. We provide an information-theoretic proof that the PTCD could have any diversity order. Based on extensive simulations, we reveal that PTCD can also outperform benchmarks without any additional cost.

cs.IT↗