arXiv subjects

Ferenc Kun

Publications and source records attributed to Ferenc Kun.

49 records · Page 3Linked to original sources

arXiv2004

Fragmentation of shells

We present a theoretical and experimental study of the fragmentation of closed thin shells made of a disordered brittle material. Experiments were performed on brown and white hen egg-shells under two different loading conditions: impact with a hard wall and explosion by a combustible mixture both give rise to power law fragment size distributions. A three-dimensional discrete element model of shells is worked out. Based on simulations of the model we give evidence that power law fragment mass distributions arise due to an underlying phase transition which proved to be abrupt for explosion and continuous for impact. We demonstrate that the fragmentation of closed shells defines a new universality class of fragmentation phenomena.

cond-mat.dis-nn↗

arXiv2003

Structure formation in binary colloids

A theoretical study of the structure formation observed very recently [Phys. Rev. Lett. 90, 128303 (2003)] in binary colloids is presented. In our model solely the dipole-dipole interaction of the particles is considered, electrohidrodynamic effects are excluded. Based on molecular dynamics simulations and analytic calculations we show that the total concentration of the particles, the relative concentration and the relative dipole moment of the components determine the structure of the colloid. At low concentrations the kinetic aggregation of particles results in fractal structures which show a crossover behavior when increasing the concentration. At high concentration various lattice structures are obtained in a good agreement with experiments.

cond-mat.soft↗

arXiv2002

Universality classes in creep rupture

We study the creep response of solids to a constant external load in the framework of a novel fiber bundle model introduced. Analytical and numerical calculations showed that increasing the external load on a specimen a transition takes place from a partially failed state of infinite lifetime to a state where global failure occurs at a finite time. Two universality classes of creep rupture were identified depending on the range of interaction of fibers: in the mean field limit the transition between the two states is continuous characterized by power law divergences, while for local interactions it becomes abrupt with no scaling. Varying the range of interaction a sharp transition is revealed between the mean field and short range regimes. The creeping system evolves into a macroscopic stationary state accompanied by the emergence of a power law distribution of inter-event times of the microscopic relaxation process, which indicates self organized criticality in creep.

cond-mat.stat-mech↗

arXiv2002

Time evolution of damage under variable ranges of load transfer

We study the time evolution of damage in a fiber bundle model in which the range of interaction of fibers varies through an adjustable stress transfer function recently introduced. We find that the lifetime of the material exhibits a crossover from mean field to short range behavior as in the static case. Numerical calculations showed that the value at which the transition takes place depends on the system's disorder. Finally, we have performed a microscopic analysis of the failure process. Our results confirm that the growth dynamics of the largest crack is radically different in the two limiting regimes of load transfer during the first stages of breaking.

cond-mat.stat-mech↗

arXiv2002

Scaling laws of creep rupture of fiber bundles

We study the creep rupture of fiber composites in the framework of fiber bundle models. Two novel fiber bundle models are introduced based on different microscopic mechanisms responsible for the macroscopic creep behavior. Analytical and numerical calculations show that above a critical load the deformation of the creeping system monotonically increases in time resulting in global failure at a finite time $t_f$, while below the critical load the system suffers only partial failure and the deformation tends to a constant value giving rise to an infinite lifetime. It is found that approaching the critical load from below and above the creeping system is characterized by universal power laws when the fibers have long range interaction. The lifetime of the composite above the critical point has a universal dependence on the system size.

cond-mat.stat-mech↗

arXiv2002

Evolution of percolating force chains in compressed granular media

The evolution of effective force chains percolating through a compressed granular system is investigated. We performed experiments by compressing an ensemble of spherical particles in a cylindrical container monitoring the macroscopic constitutive behavior and the acoustic signals emitted by microscopic rearrangements of particles. As a novel approach, we applied the continuous damage model of fiber bundles to describe the evolution of the array of force chains during the loading process. The model provides a nonlinear constitutive behavior in good quantitative agreement with the experimental results. For a system of hard particles the model predicts a universal power law divergence of stress when approaching a critical deformation. The amplitude distribution of acoustic signals was found experimentally to follow a power law with exponent $δ= 1.15 \pm 0.05$ which is in a good agreement with the analytic solution of the model.

cond-mat↗

arXiv2002

Fracture model with variable range of interaction

We introduce a fiber bundle model where the interaction among fibers is modeled by an adjustable stress-transfer function which can interpolate between the two limiting cases of load redistribution, the global and the local load sharing schemes. By varying the range of interaction several features of the model are numerically studied and a crossover from mean field to short range behavior is obtained. The properties of the two regimes and the emergence of the crossover in between are explored by numerically studying the dependence of the ultimate strength of the material on the system size, the distribution of avalanches of breakings, and of the cluster sizes of broken fibers. Finally, we analyze the moments of the cluster size distributions to accurately determine the value at which the crossover is observed.

cond-mat.stat-mech↗

arXiv2001

A study of transverse ply cracking using a discrete element method

We study the transverse cracking of the 90 degree ply in [0/90] cross-ply laminates by means of a discrete element method. To model the 90 degree ply a two-dimensional triangular lattice of springs is constructed where nodes of the lattice model fibers, and springs with random breaking thresholds represent the disordered matrix material in between. The spring-lattice is coupled by interface springs to two rigid bars which represent the two 0 degree plies in the model, which could be sublaminate as well. Molecular dynamics simulation is used to follow the time evolution of the model system. It was found that under gradual loading of the specimen, after some distributed cracking, segmentation cracks occur in the 90 degree ply which then develop into a saturated state where the ply cannot support additional load. The stress distribution between two neighboring segmentation cracks was determined, furthermore, the dependence of the microstructure of damage on the ply's thickness was also studied. To give a quantitative characterization of stiffness degradation, the Young modulus of the system is monitored as a function of the density of segmentation cracks. The results of the simulations are in satisfactory agreement with experimental findings and with the results of analytic calculations.

cond-mat.mtrl-sci↗

arXiv2001

Bursts in a fiber bundle model with continuous damage

We study the constitutive behaviour, the damage process, and the properties of bursts in the continuous damage fiber bundle model introduced recently. Depending on its two parameters, the model provides various types of constitutive behaviours including also macroscopic plasticity. Analytic results are obtained to characterize the damage process along the plastic plateau under strain controlled loading, furthermore, for stress controlled experiments we develop a simulation technique and explore numerically the distribution of bursts of fiber breaks assuming infinite range of interaction. Simulations revealed that under certain conditions power law distribution of bursts arises with an exponent significantly different from the mean field exponent 5/2. A phase diagram of the model characterizing the possible burst distributions is constructed.

cond-mat.stat-mech↗

arXiv2001

Creep rupture of viscoelastic fiber bundles

We study the creep rupture of bundles of viscoelastic fibers occurring under uniaxial constant tensile loading. A novel fiber bundle model is introduced which combines the viscoelastic constitutive behaviour and the strain controlled breaking of fibers. Analytical and numerical calculations showed that above a critical external load the deformation of the system monotonically increases in time resulting in global failure at a finite time $t_f$, while below the critical load the deformation tends to a constant value giving rise to an infinite lifetime. Our studies revealed that the nature of the transition between the two regimes, i.e. the behaviour of $t_f$ at the critical load $sigma_c$, strongly depends on the range of load sharing: for global load sharing $t_f$ has a power law divergence at $σ_c$ with a universal exponent of 0.5, however, for local load sharing the transition becomes abrupt: at the critical load $t_f$ jumps to a finite value, analogous to second and first order phase transitions, respectively. The acoustic response of the bundle during creep is also studied.

cond-mat.stat-mech↗

arXiv2000

Damage in Fiber Bundle Models

We introduce a continuous damage fiber bundle model that gives rise to macroscopic plasticity and compare its behavior with that of dry fiber bundles. Several interesting constitutive behaviors are found in this model depending on the value of the damage parameter and on the form of the disorder distribution. In addition, we compare the behavior of global load transfer models with local load transfer models and study in detail the damage evolution before failure. We emphasize the analogies between our results and spinodal nucleation in first-order phase transitions.

cond-mat.stat-mech↗

arXiv1998

Transition from damage to fragmentation in collision of solids

We investigate fracture and fragmentation of solids due to impact at low energies using a two-dimensional dynamical model of granular solids. Simulating collisions of two solid discs we show that, depending on the initial energy, the outcome of a collision process can be classified into two states: a damaged and a fragmented state with a sharp transition in between. We give numerical evidence that the transition point between the two states behaves as a critical point, and we discuss the possible mechanism of the transition.

cond-mat.stat-mech↗

arXiv1995

A study of fragmentation processes using a discrete element method

We present a model of solids made from polygonal cells connected via beams. We calculate the macroscopic elastic moduli from the beam and cell parameters. This modellisation is particularly suited for the simulation of fragmentation processes. We study the effects of an explosion inside a circular disk and the impact of a projectile and obtain the fragment size distribution. We find that if breaking only happens under tensile forces a layer on the free wall opposed to impact is first ejected. In that case the distribution follows a power-law with an exponent that in most cases is around two.

cond-mat↗