arXiv subjects

Fernando Moreno-Insertis

Publications and source records attributed to Fernando Moreno-Insertis.

13 recordsLinked to original sources

arXiv2025

Spectropolarimetric synthesis of forbidden lines in MHD models of coronal bright points

The inference of the magnetic field vector from spectropolarimetric observations is crucial for understanding the physical processes governing the solar corona. We investigate which information on the magnetic fields of coronal bright points (CBP) can be gained from the intensity and polarization of the Fe XIII 10747 A, Fe XIV 5303 A, Si X 14301 A, and Si IX 39343 A forbidden lines. We apply the P-CORONA synthesis code to a CBP model in the very low corona, obtained with the Bifrost code, and to a larger global model to study the impact of the outer coronal material along the line of sight (LoS). The enhanced density within the CBP produces an intensity brightening, but suppresses the linear polarization. The circular polarization from such regions often approaches 0.1% of the intensity. The contribution from the coronal material along the LoS depends strongly on its temperature, and is weaker for lines with a peak response at higher temperatures (Fe10747 at 1.7 MK; Fe5303 at 2 MK). The weak field approximation (WFA) provides information on the longitudinal magnetic fields in the strongest-emitting spatial intervals along the LoS, and is more reliable in the regions of the CBP where the field does not change sign. This tends to coincide with the regions where there is a strong correlation between the circular polarization and the wavelength derivative of the intensity. Considering roughly 30 minutes of time evolution, the CBP signals are somewhat attenuated but are still identifiable, while the area where the WFA can be suitably applied remains substantial. The circular polarization of the Fe5303 and especially Fe10747 lines are valuable diagnostics for the magnetic fields in the higher-temperature regions of the CBP, which could be exploited with future coronagraphs with similar capabilities to Cryo-NIRSP/DKIST, but designed to observe below 1.05 solar radii.

astro-ph.SR↗

arXiv2024

Study of the excitation of large amplitude oscillations in a prominence by nearby flares

Large amplitude oscillations commonly occur in solar prominences, triggered by energetic phenomena such as jets and flares. On March 14-15, 2015, a filament partially erupted in two stages, leading to oscillations in different parts. This study explores longitudinal oscillations from the eruption, focusing on the mechanisms behind their initiation, with special attention to the large oscillation on March 15. The oscillations and jets are analyzed using the time-distance technique. For flares and their interaction with the filament, we analyze AIA channels and use the DEM technique. Initially, a jet fragments the filament, splitting it into two segments. One remains in place, while the other detaches and moves. This causes oscillations in both segments: (a) the position change causes the detached segment to oscillate with a period of $69 \pm 3$ minutes; (b) the jet flows cause the remaining filament to oscillate with a period of $62 \pm 2$ minutes. In the second phase, on March 15, another jet seemingly activates the detached filament eruption, followed by a flare. A large longitudinal oscillation occurs in the remnant segment with a period of $72 \pm 2$ minutes and velocity amplitude $73 \pm 1 \, \mathrm{km s^{-1}}$. During the oscillation trigger, bright field lines connect the flare with the filament, appearing only in the AIA 131$\r{A}$ and 94$\r{A}$ channels, indicating the presence of hot plasma. DEM analysis confirms this, showing plasma around 10 MK pushing the prominence from its southeastern side, displacing it along the field lines and starting the oscillation. From this, the flare -- not the preceding jet-triggers the oscillation. The hot plasma flows into the filament channel. We explain how flares trigger large oscillations in filaments by proposing that post-flare loops reconnect with the filament channel's magnetic field.

astro-ph.SR↗

arXiv2024

High-resolution observations of recurrent jets from an arch filament system

Solar jets are collimated plasma ejections along magnetic field lines observed in hot (EUV jets) and cool (chromospheric surges) temperature diagnostics. Their trigger mechanisms and the relationship between hot and cool jets are still not completely understood. We aim to investigate the generation of a sequence of active region solar jets and their evolution from the photospheric to the coronal heights. Using the synergy of high spatial and temporal resolution observations by the SST, along with the SDO, we analyze a sequence of solar jets originating in a mixed polarity region between the leading and following sunspots of an active region. We use a NFFF extrapolation technique for deriving the magnetic field topology of the active region. A mixed polarity region is formed over a long period (24 hours) with persistent magnetic flux emergence. This region has been observed as an arch filament system (AFS) in chromospheric SST observations. In this region, negative polarities surrounded by positive polarities create a fan-surface with a null point at a height of 6 Mm detected in the NFFF extrapolation. SST observations in H-beta spectral line reveal a large flux rope over the AFS and moving from the North to South, causing successive EUV and cool jets to move in the East-West direction and later towards the South along the long open loops. The high resolution SST observations (0.038 arcsec per pixel) resolve the dark area observed at the jet base and reveal the existence of an AFS with an extended cool jet which may be the result of a peeling-like mechanism of the AFS. Based on the combined analysis of SST and AIA observations along with extrapolated magnetic topology, it is suggested that the magnetic reconnection site may move southward by approximately 20 Mm until it reaches a region where the open magnetic field lines are oriented North-South.

astro-ph.SR↗

arXiv2023

Interaction of solar jets with filaments: Triggering of large-amplitude filament oscillations

Large-amplitude oscillations (LAOs) are often detected in filaments. Using multiwavelength observations, their origin can be traced back to the interaction with eruptions and jets. We present two different case studies as observational evidence in support of 2.5D MHD numerical experiments that show that the LAOs in the filament channels can be initiated by solar jets. In the two studied events, we can identify a quadrupolar configuration with an X-point at the top of the parasitic region suggestive of a classical null-point. A reconnection flow emanates from this structure leading to a jet that propagates along the filament channel. In both cases we can identify the quiescent and eruptive phases of the jet. The triggered LAOs have periods of around 70-80 minutes and are damped after a few oscillations. The minimum magnetic field intensity inferred with seismology for the filament turns out to be around 30 Gauss. We conclude that the two case studies are consistent with the recent numerical model of Luna and Moreno-Insertis (2021), in which the LAOs are initiated by jets. The relationship between the onset of the jet and filament oscillations is straight-forward for the first case and less for the second case. In the second event, although there is some evidence, we cannot rule out other possibilities such as activity unrelated to the null-point or changes in the magnetic structure of the filament. Both jets are associated with very weak flares which did not launch any EUV wave. Therefore the role of EUV waves for triggering the filament oscillations can be eliminated for these two case.

astro-ph.SR↗

arXiv2021

Large-amplitude prominence oscillations following the impact by a coronal jet

Observational evidence shows that coronal jets can hit prominences and set them in motion. The impact leads to large-amplitude oscillations (LAOs) of the prominence. In this paper we attempt to understand this process via 2.5D MHD numerical experiments. In our model, the jets are generated in a sheared magnetic arcade above a parasitic bipolar region located in one of the footpoints of the filament channel (FC) supporting the prominence. The shear is imposed with velocities not far above observed photospheric values; it leads to a multiple reconnection process, as in previous jet models. Both a fast Alfv\'enic perturbation and a slower supersonic front preceding a plasma jet are issued from the reconnection site; in the later phase, a more violent (eruptive) jet is produced. The perturbation and jets run along the FC; they are partially reflected at the prominence and partially transmitted through it. There results a pattern of counter-streaming flows along the FC and oscillations of the prominence. The oscillations are LAOs (with amplitude above $10~\mathrm{km\, s^{-1}}$) in parts of the prominence both in the longitudinal and transverse directions. In some field lines, the impact is so strong that the prominence mass is brought out of the dip and down to the chromosphere along the FC. Two cases are studied with different heights of the arcade above the parasitic bipolar region, leading to different heights for the region of the prominence perturbed by the jets. The obtained oscillation amplitudes and periods are in general agreement with the observations.

astro-ph.SR↗

arXiv2020

The chromospheric component of coronal bright points. Coronal and chromospheric responses to magnetic-flux emergence

We investigate the chromospheric counterpart of small-scale coronal loops constituting a coronal bright point (CBP) and its response to a photospheric magnetic-flux increase accompanied by co-temporal CBP heating. We used co-observations from the AIA and HMI/SDO, together with data from the Fast Imaging Solar Spectrograph taken in the Halpha and Ca II 8542 lines. We used a new multi-layer spectral inversion technique to derive the temporal variations of the temperature of the Halpha loops (HLs). We find that the counterpart of the CBP, as seen at chromospheric temperatures, is composed of a bundle of dark elongated features named in this work Halpha loops, which constitute an integral part of the CBP loop magnetic structure. An increase in the photospheric magnetic flux due to flux emergence is accompanied by a rise of the coronal emission of the CBP loops, that is a heating episode. We also observe enhanced chromospheric activity associated with the occurrence of new HLs and mottles. While the coronal emission and magnetic flux increases appear to be co-temporal, the response of the Halpha counterpart of the CBP occurs with a small delay of less than 3 min. A sharp temperature increase is found in one of the HLs and in one of the CBP footpoints estimated at 46% and 55% with respect to the pre-event values, also starting with a delay of less than 3~min following the coronal heating episode. The low-lying CBP loop structure remains non-potential for the entire observing period. The magnetic topological analysis of the overlying corona reveals the presence of a coronal null point at the beginning and towards the end of the heating episode. The delay in the response of the chromospheric counterpart of the CBP suggests that the heating may have occurred at coronal heights.

astro-ph.SR↗

arXiv2020

A case-study of multi-temperature coronal jets for emerging flux MHD models

Context: Hot coronal jets are a basic observed feature of the solar atmosphere whose physical origin is still being actively debated. Aims: We study six recurrent jets occurring in the active region NOAA 12644 on April 04, 2017. They are observed in all the hot filters of AIA as well as cool surges in IRIS slit-jaw high spatial and temporal resolution images. Methods: The AIA filters allow us to study the temperature and the emission measure of the jets using the filter ratio method. We study the pre-jet phases by analyzing the intensity oscillations at the base of the jets with the wavelet technique. Results: A fine co-alignment of the AIA and IRIS data shows that the jets are initiated at the top of a canopy-like, double-chambered structure with cool emission on one side and hot emission in the other. The hot jets are collimated in the hot temperature filters, have high velocities (around 250 km/s) and accompanied by the cool surges and ejected kernels both moving at about 45 km/s. In the pre-phase of the jets, at their base we find quasi-periodic intensity oscillations in phase with small ejections; they have a period between 2 and 6 minutes and are reminiscent of acoustic or MHD waves. Conclusions: This series of jets and surges provides a good case-study to test the 2D and 3D magnetohydrodynamic (MHD) models that result from magnetic flux emergence. The double-chambered structure found in the observations corresponds to the cold and hot loop regions found in the models beneath the current sheet that contains the reconnection site. The cool surge with kernels is comparable with the cool ejection and plasmoids that naturally appear in the models.

astro-ph.SR↗

arXiv2018

Self-Similar Approach for Rotating Magnetohydrodynamic Solar and Astrophysical Structures

Rotating magnetic structures are common in astrophysics, from vortex tubes and tornados in the Sun all the way to jets in different astrophysical systems. The physics of these objects often combine inertial, magnetic, gas pressure and gravitational terms. Also, they often show approximate symmetries that help simplify the otherwise rather intractable equations governing their morphology and evolution. Here we propose a general formulation of the equations assuming axisymmetry and a self-similar form for all variables: in spherical coordinates $(r,\theta,\phi)$, the magnetic field and plasma velocity are taken to be of the form: ${\bf B}={\bf f}(\theta)/r^n$ and ${\bf v}={\bf g}(\theta)/r^m$, with corresponding expressions for the scalar variables like pressure and density. Solutions are obtained for potential, force-free, and non-force-free magnetic configurations. Potential-field solutions can be found for all values of~$n$. Non-potential force-free solutions possess an azimuthal component $B_\phi$ and exist only for $n\ge2$; the resulting structures are twisted and have closed field lines but are not collimated around the system axis. In the non-force free case, including gas pressure, the magnetic field lines acquire an additional curvature to compensate for an outward pointing pressure gradient force. We have also considered a pure rotation situation with no gravity, in the zero-$\beta$ limit: the solution has cylindrical geometry and twisted magnetic field lines. The latter solutions can be helpful in producing a collimated magnetic field structure; but they exist only when $n<0$ and $m<0$: for applications they must be matched to an external system at a finite distance from the origin.

astro-ph.SR↗

arXiv2015

Multi-Parametric Study of Rising 3D Buoyant Flux Tubes in an Adiabatic Stratification Using AMR

We study the buoyant rise of magnetic flux tubes embedded in an adiabatic stratification using two-and three-dimensional, MHD simulations. We analyze the dependence of the tube evolution on the field line twist and on the curvature of the tube axis in different diffusion regimes. To be able to achieve a comparatively high spatial resolution we use the FLASH code, which has a built-in Adaptive Mesh Refinement (AMR) capability. Our 3D experiments reach Reynolds numbers that permit a reasonable comparison of the results with those of previous 2D simulations. When the experiments are run without AMR, hence with a comparatively large diffusivity, the amount of longitudinal magnetic flux retained inside the tube increases with the curvature of the tube axis. However, when a low-diffusion regime is reached by using the AMR algorithms, the magnetic twist is able to prevent the splitting of the magnetic loop into vortex tubes and the loop curvature does not play any significant role. We detect the generation of vorticity in the main body of the tube of opposite sign on the opposite sides of the apex. This is a consequence of the inhomogeneity of the azimuthal component of the field on the flux surfaces. The lift force associated with this global vorticity makes the flanks of the tube move away from their initial vertical plane in an antisymmetric fashion. The trajectories have an oscillatory motion superimposed, due to the shedding of vortex rolls to the wake, which creates a Von Karman street.

astro-ph.SR↗

arXiv2015

Are tornado-like magnetic structures able to support solar prominence plasma?

Recent high-resolution and high-cadence observations have surprisingly suggested that prominence barbs exhibit apparent rotating motions suggestive of a tornado-like structure. Additional evidence has been provided by Doppler measurements. The observations reveal opposite velocities for both hot and cool plasma on the two sides of a prominence barb. This motion is persistent for several hours and has been interpreted in terms of rotational motion of prominence feet. Several authors suggest that such barb motions are rotating helical structures around a vertical axis similar to tornadoes on Earth. One of the difficulties of such a proposal is how to support cool prominence plasma in almost-vertical structures against gravity. In this work we model analytically a tornado-like structure and try to determine possible mechanisms to support the prominence plasma. We have found that the Lorentz force can indeed support the barb plasma provided the magnetic structure is sufficiently twisted and/or significant poloidal flows are present.

astro-ph.SR↗

arXiv2013

Plasma Jets and Eruptions in Solar Coronal Holes: a 3D flux emergence experiment

A three-dimensional numerical experiment of the launching of a hot and fast coronal jet followed by several violent eruptions is analyzed in detail. These events are initiated through the emergence of a magnetic flux rope from the solar interior into a coronal hole. We explore the evolution of the emerging magnetically-dominated plasma dome surmounted by a current sheet and the ensuing pattern of reconnection. A hot and fast coronal jet with inverted-Y shape is produced that shows properties comparable to those frequently observed with EUV and X-Ray detectors. We analyze its 3D shape, its inhomogeneous internal structure, and its rise and decay phases, lasting for some 15-20 min each. Particular attention is devoted to the field-line connectivities and the reconnection pattern. We also study the cool and high-density volume that appears encircling the emerged dome. The decay of the jet is followed by a violent phase with a total of five eruptions. The first of them seems to follow the general pattern of tether-cutting reconnection in a sheared arcade, although modified by the field topology created by the preceding reconnection evolution. The two following eruptions take place near and above the strong field-concentrations at the surface. They show a twisted, \Omega-loop like rope expanding in height, with twist being turned into writhe, thus hinting at a kink instability (perhaps combined with a torus-instability) as the cause of the eruption. The succession of a main jet ejection and a number of violent eruptions that resemble mini-CME's and their physical properties suggest that this experiment may provide a model for the blowout jets recently proposed in the literature.

astro-ph.SR↗

arXiv2011

On the origin of the Type~{\sc ii} spicules - dynamic 3D MHD simulations

have forced the definition of a new type of spicule, "type II's", that are characterized by rising rapidly, having short lives, and by fading away at the end of their lifetimes. Here, we report on features found in realistic 3D simulations of the outer solar atmosphere that resemble the observed type II spicules. These features evolve naturally from the simulations as a consequence of the magnetohydrodynamical evolution of the model atmosphere. The simulations span from the upper layer of the convection zone to the lower corona and include the emergence of horizontal magnetic flux. The state-of-art Oslo Staggered Code (OSC) is used to solve the full MHD equations with non-grey and non-LTE radiative transfer and thermal conduction along the magnetic field lines. We describe in detail the physics involved in a process which we consider a possible candidate as a driver mechanism to produce type II spicules. The modeled spicule is composed of material rapidly ejected from the chromosphere that rises into the corona while being heated. Its source lies in a region with large field gradients and intense electric currents, which lead to a strong Lorentz force that squeezes the chromospheric material, resulting in a vertical pressure gradient that propels the spicule along the magnetic field, as well as Joule heating, which heats the the jet material, forcing it to fade.

astro-ph.SR↗

arXiv2007

Magnetic flux emergence in granular convection: Radiative MHD simulations and observational signatures

We study the emergence of magnetic flux from the near-surface layers of the solar convection zone into the photosphere. To model magnetic flux emergence, we carried out a set of numerical radiative magnetohydrodynamics simulations. Our simulations take into account the effects of compressibility, energy exchange via radiative transfer, and partial ionization in the equation of state. All these physical ingredients are essential for a proper treatment of the problem. Furthermore, the inclusion of radiative transfer allows us to directly compare the simulation results with actual observations of emerging flux. We find that the interaction between the magnetic flux tube and the external flow field has an important influence on the emergent morphology of the magnetic field. Depending on the initial properties of the flux tube (e.g. field strength, twist, entropy etc.), the emergence process can also modify the local granulation pattern. The emergence of magnetic flux tubes with a flux of $10^{19}$ Mx disturbs the granulation and leads to the transient appearance of a dark lane, which is coincident with upflowing material. These results are consistent with observed properties of emerging magnetic flux.

astro-ph↗