SearcharxivSearch

arXiv subjects

Fernando Sato

Publications and source records attributed to Fernando Sato.

13 recordsLinked to original sources

Electronic properties of substitutional impurities in graphene-like C$_2$N, $tg$-C$_3$N$_4$, and $hg$-C$_3$N$_4$

We study the electronic and structural properties of substitutional impurities of graphenelike nanoporous materials C$_2$N, $tg$-, and $hg$-C$_3$N$_4$ by means of density functional theory calculations. We consider four types of impurities; boron substitution on carbon sites (B(C)), carbon substitution on nitrogen sites (C(N)), nitrogen substitution on carbon sites (N(C)), and sulfur substitution on nitrogen sites (S(N)). From cohesive energy calculations, we find that the C(N) and B(C) substitutions are the most energetically favorable and induce small bond modifications in the vicinity of the impurity, while the S(N) induces strong lattice distortions. Though all of the studied impurities induce defect levels inside the band gap of these materials, their electronic properties are poles apart depending on the behavior of the impurity as an acceptor or a donor. It is also observed that acceptor (donor) wavefunctions are composed only of $\sigma$ ($\pi$) orbitals from the impurity itself and/or neighboring sites. Consequently, acceptor wavefunctions are directed towards the pores and donor wavefunctions are more extended throughout the neighboring atoms, a property that could further be explored to modify the interaction between these materials and adsorbates. Moreover, impurity properties display a strong site sensitivity and ground state binding energies ranging from $0.03$ to $1.13$ eV, thus offering an interesting route for tuning the optical properties of these materials. Finally, spin-polarized calculations reveal that all impurity configurations have a magnetic ground state that rises from the spin splitting of the impurity levels. In a few configurations, more than one impurity level can be found inside the gap and two of them could potentially be explored as two-level systems for single-photon emission, following similar proposals recently made on defect complexes on TMDCs.

cond-mat.mtrl-sci

Digital Beings as an option to study gut flora evolution and adaptation

In this work, we introduce a computational model for the study of the host-bacteria interaction and the influence of the intestinal microbiota on the behavior and feeding pattern of an individual. The model is based on digital entities, which we've called Digital Beings (DBs), modeled using dynamic systems and genetic algorithms. We have successfully tested the use of the DBs by reproducing observation in previously made studies using rats and humans. Among these studies, we highlight those on how the bacteria in an individual's stomach could influence their eating behavior and how a controlled and continuous diet can affect the longevity of a certain population. Our results point that the Digital Beings can be used as a tool for supporting the devising of experiments and corroborating with theoretical hypotheses, reducing the number of in vivo tests.

q-bio.PE

The Frogs Method: A Bioinspired Algorithm For Micromagnetic Dynamics Skyrmion Data Extraction

In this work we present a new bio-inspired method (using an adapted, frog based Particle Swarm Optimization) that can track a skyrmion's position. The structure and position of skyrmions in a given system is usually determined either by visual impression through a vector plot, or by averaging over magnetization and topological charge. Due to the inherent difficulty of acquiring this information in discrete systems, and also in systems with finite boundaries, we present a method which is able to reliably track a wide array of different topological structures, while also providing additional data about internal degrees of freedom, in both stationary and dynamic cases.

cond-mat.mtrl-sci

Modeling our survival in a zombie apocalypse

In this work we applied several concepts on the modeling of complex systems in an attempt to save mankind in the case of a zombie apocalypse. We developed a dynamical system in order to model a zombie outbreak in which we, regular humans, are aided by military personnel in the fight against the zombies. Our analysis has shown that the initial amount of military personnel play a key rule on our survival, even when the zombies are extremely aggressive and in large advantage.This document is a pre-print version of the paper de Mendon\c{c}a, J.P.A., Teixeira, L.M.V., Sato, F. et al. Math Intelligencer (2019). https://doi.org/10.1007/s00283-019-09893-9.

physics.pop-ph

Mechanical Deformation of Nanoscale Metal Rods: When size and shape matters

Understanding nanomechanical response of materials represents a scientific challenge. Here, we have used in-situ electron microscopy to reveal drastic for the first time changes of structural behavior during deformation of 1-nm-wide metal rods as a function of temperature. At 300 K, stretched nanowires stay defect-free, while at 150 K, elongation is associated with planar defects. As size is reduced, energy barriers become so small that ambient thermal energy is sufficient to overcome them. Nanorods display an elastic regime until a mechanism with high enough blocking barrier can be nucleated. Ab-initio calculations revealed that contribution from surface steps overrule stacking fault energetics in nanorods, in such a way that system size and shape determines preferred fault gliding directions. This induces anisotropic behavior and, even large differences in elastic or plastic response for elongation or compression. These results provide a new framework to improve theoretical models and atomic potentials to describe the mechanical properties at nanoscale.

cond-mat.mtrl-sci

Rotational dynamics and polymerization of C$_{60}$ in C$_{60}$-cubane crystals: A molecular dynamics study

We report classical and tight-binding molecular dynamics simulations of the C$_{60}$ fullerene and cubane molecular crystal in order to investigate intermolecular dynamics and polymerization processes. Our results show that, for 200 K and 400 K, cubane molecules remain basically fixed, presenting only thermal vibrations, while C$_{60}$ fullerenes show rotational motions. Fullerenes perform "free" rotational motions at short times ($\lesssim$ 1 ps), small amplitude hindered rotational motions (librations) at intermediate times, and rotational diffusive dynamics at long times ($\gtrsim$ 10 ps). The mechanisms underlying these dynamics are presented. Random copolymerization among cubanes and fullerenes were observed when temperature is increased, leading to the formation of a disordered structure. Changes in the radial distribution function and electronic density of states indicate the coexistence of amorphous and crystalline phases. The different conformational phases that cubanes and fullerenes undergo during the copolymerization process are discussed.

cond-mat.mtrl-sci

Defects in Graphene-Based Twisted Nanoribbons: Structural, Electronic and Optical Properties

We present some computational simulations of graphene-based nanoribbons with a number of half-twists varying from 0 to 4 and two types of defects obtained by removing a single carbon atom from two different sites. Optimized geometries are found by using a mix of classical-quantum semiempirical computations. According with the simulations results, the local curvature of the nanoribbons increases at the defect sites, specially for a higher number of half-twists. The HOMO-LUMO energy gap of the nanostructures has significant variation when the number of half-twists increases for the defective nanoribbons. At the quantum semiempirical level, the first optically active transitions and oscillator strengths are calculated using the full configuration interaction (CI) framework, and the optical absorption in the UV/Visible range (electronic transitions) and in the infrared (vibrational transitions) are achieved. Distinct nanoribbons show unique spectral signatures in the UV/Visible range, with the first absorption peaks in wavelengths ranging from the orange to the violet. Strong absorption is observed in the ultraviolet region, although differences in their infrared spectra are hardly discernible.

cond-mat.mtrl-sci

Möbius and twisted graphene nanoribbons: stability, geometry and electronic properties

Results of classical force field geometry optimizations for twisted graphene nanoribbons with a number of twists $N_t$ varying from 0 to 7 (the case $N_t$=1 corresponds to a half-twist Möbius nanoribbon) are presented in this work. Their structural stability was investigated using the Brenner reactive force field. The best classical molecular geometries were used as input for semiempirical calculations, from which the electronic properties (energy levels, HOMO, LUMO orbitals) were computed for each structure. CI wavefunctions were also calculated in the complete active space framework taking into account eigenstates from HOMO-4 to LUMO+4, as well as the oscillator strengths corresponding to the first optical transitions in the UV-VIS range. The lowest energy molecules were found less symmetric than initial configurations, and the HOMO-LUMO energy gaps are larger than the value found for the nanographene used to build them due to electronic localization effects created by the twisting. A high number of twists leads to a sharp increase of the HOMO $\to$ LUMO transition energy. We suggest that some twisted nanoribbons could form crystals stabilized by dipolar interactions.

cond-mat.mtrl-sci

Observation of the Smallest Metal Nanotube with Square-cross-section

Understanding the mechanical properties of nanoscale systems requires a range of measurement techniques and theoretical approaches to gather the relevant physical and chemical information. The arrangements of atoms in nanostructures and macroscopic matter can be different, principally due to the role of surface energy, but the interplay between atomic and electronic structure in association with applied mechanical stress can also lead to surprising differences. For example, metastable structures such as suspended chains of atoms and helical wires have been produced by the stretching of metal junctions. Here we report the spontaneous formation of the smallest possible metal nanotube with a square cross-section during the elongation of silver nanocontacts. Ab initio calculations and molecular simulations indicate that the hollow wire forms because this configuration allows the surface energy to be minimized, and also generates a soft structure capable of absorbing a huge tensile deformation.

cond-mat.mtrl-sci

Structure-Activity Relationship Investigation of Some New Tetracyclines by Electronic Index Methodology

Tetracyclines are an old class of molecules that constitute a broad-spectrum antibiotics. Since the first member of tetracycline family were isolated, the clinical importance of these compounds as therapeutic and prophylactic agents against a wide range of infections has stimulated efforts to define their mode of action as inhibitors of bacterial reproduction. We used three SAR methodologies for the analysis of biological activity of a set of 104 tetracycline compounds. Our calculation were carried out using the semi-empirical Austin Method One (AM1) and Parametric Method 3 (PM3). Electronic Indices Methodology (EIM), Principal Component Analysis (PCA) and Artificial Neural Networks (ANN) were applied to the classification of 14 old and 90 new proposed derivatives of tetracyclines. Our results make evident the importance of EIM descriptors in pattern recognition and also show that the EIM can be effectively used to predict the biological activity of Tetracyclines.

q-bio.BM

Designing Conducting Polymers Using Bioinspired Ant Algorithms

Ant algorithms are inspired in real ants and the main idea is to create virtual ants that travel into the space of possible solution depositing virtual pheromone proportional to how good a specific solution is. This creates a autocatalytic (positive feedback) process that can be used to generate automatic solutions to very difficult problems. In the present work we show that these algorithms can be used coupled to tight-binding hamiltonians to design conducting polymers with pre-specified properties. The methodology is completely general and can be used for a large number of optimization problems in materials science.

cond-mat.mtrl-sci

Is Small Perfect? Size Limit to Defect Formation in Pyramidal Pt Nanocontacts

We report high resolution transmission electron microscopy and ab initio calculation results for the defect formation in Pt nanocontacts (NCs). Our results show that there is a size limit to the existence of twins (extended structural defects). Defects are always present but blocked away from the tip axes. The twins may act as scattering plane, influencing contact electron transmission for Pt NC at room temperature and Ag/Au NC at low temperature.

cond-mat.mtrl-sci

Cobaltocene Encapsulation Into Single-walled Carbon Nanotubes: A Molecular Dynamics Investigation

Recently (PRL 96, 106804 (2006)) it was suggested that cobaltocene(CC) molecules encapsulated into (7,7) carbon nanotubes (CNT@(7,7)) could be the basis for new spintronic devices. We show here based on impact molecular dynamics and DFT calculations that when dynamical aspects are explicitly considered the CC encapsulation into CNT@(7,7) does not occur, it is prevented by a dynamic barrier mainly due to van der Waals interactions. Our results show that CNT@(13,0) having enough axial space for encapsulation but no enough one to allow freely rotation of the cobaltocene molecule would be a feasible candidate to such application.

cond-mat.mtrl-sci