Searcharxiv⌕ Search

arXiv subjects

Fetah Benabid

Publications and source records attributed to Fetah Benabid.

At least 19 recordsLinked to original sources
arXiv2026

Modeling and Optimization of Cascaded Four-Wave Mixing toward the VUV in Xenon-Filled Negative-Curvature Fibers

In this work, we thoroughly characterize third- and fourth-harmonic generation through cascaded four-wave mixing in a xenon-filled negative-curvature hollow-core fiber operated under a pressure gradient. The experimental results are supported by both a semi-analytical model and numerical simulations, which accurately reproduce the pressure dependence of the harmonic conversion. We identify the optimum pressure conditions for third and fourth-harmonic generation and experimentally observe the cascaded four-wave-mixing process extending into the vacuum ultraviolet (VUV), up to the sixth harmonic at 172 nm, with the accessible spectral range limited by the available VUV filter.

physics.optics↗
arXiv2026

Comparative Study of Hollow-Core and Standard Optical Fibers for Astronomy

Efficient light transmission in the blue-visible regime remains a major limitation for fiber-fed astronomical spectrographs, where low photon flux and the intrinsic attenuation of conventional silica fibers reduce survey sensitivity and depth. Inhibited-coupling hollow-core fibers (IC-HCFs) with reduced surface roughness offer a promising alternative, providing guidance predominantly in air and enabling significantly lower loss across the visible spectrum. In this study, we present a comparative evaluation of IC-HCFs against standard multi-mode fibers used in current astronomical instrumentation. We assess the throughput loss that occurs due to bending, twisting, or pinching of the optical fibers when moved using one of the robotic fiber-positioner prototypes designed for next-generation telescopes. These measurements quantify the performance gains offered by IC-HCFs for blue-sensitive spectroscopy and assess their suitability for integration into future survey facilities.

astro-ph.IM↗
arXiv2026

Rotation angle sensing via polarization-dependent mode superposition in a hollow-core fiber with two-fold symmetry

Hollow-core photonic crystal fibers (HCPCF) have experienced tremendous advancements recently, leading to remarkable demonstrations of transmission loss reduction and deeper understanding of their guidance fundamentals. Indeed, this progress has entailed investigations into various HCPCF designs, allowing for attaining diverse properties of interest such as ultralow loss, polarization filtering, and specific modal operation. Among HCPCFs with tailored modal characteristics are fibers displaying microstructures with modified symmetry, which allow for changing the loss hierarchy between the guided modes, hence favoring the propagation of higher-order modes. In this context, we here demonstrate the realization of an angle sensor utilizing a tubular HCPCF with a two-fold symmetric cladding. This specific fiber design enables the generation of an output intensity profile resulting from the superposition of LP01 and LP11-like modes, whose excitation and resulting output intensity spatial distribution are dependent on the polarization angle of the incident light. Thus, by rotating the input beam's polarization and analyzing the evolution of the resulting output profile, we characterized a rotation angle sensor exhibiting a sensitivity of 25 counts/degree and an estimated resolution of 0.3°. We understand that this work broadens the framework of HCPCF applications, demonstrating that symmetry-modified hollow-core fibers can act as a promising platform for advanced sensing scenarios and polarimetric characterizations.

physics.optics↗
arXiv2025

Extreme nonlinear optics in optical fibers

This paper reviews the field of extreme nonlinear optics in optical fibers, highlighting key phenomena and advancements. It discusses multiple ionization effects caused by femtosecond laser pulses that generate plasma and induce permanent material modifications, as well as plasma luminescence and its dependence on material imperfections. The formation and dynamics of plasma filaments, including helical structures, are explored, along with the rainbow spiral emission pattern useful in communications and particle manipulation. The review covers the generation of spatial-temporal waves, supercontinuum broadening, and advanced modeling techniques, such as multimode unidirectional pulse propagation equations for describing optical pulse evolution. Experimental demonstrations involving discretized conical waves and supercontinuum generation optimization are detailed. The paper emphasizes the unique capabilities of photonic crystal fibers, especially hollow-core variants, in achieving broad supercontinua and Raman frequency combs, ultrashort pulse compression, high-harmonic generation, plasma formation, and nonclassical light production. Our outlook highlights ongoing research into spatiotemporal helicon waves, ultrashort pulse propagation, vacuum ultraviolet and mid-infrared supercontinuum generation, and innovative fiber technologies. Future directions focus on enhancing fiber performance, understanding multimodal wave dynamics, and expanding applications in telecommunications, sensing, and quantum science.

physics.optics↗
arXiv2024

Widely tunable dual acousto-optic interferometric device based on a hollow core fiber

An all-fiber dual Mach-Zehnder interferometer (MZI) based on an acoustically modulated hollow-core fiber (HCF) is experimentally demonstrated for the first time. By attaching an acoustic driver in between the fixed ends of an HCF, we fabricated two acousto-optic modulators (AOMs) with distinct driver positions, allowing for synchronizing two in-line MZIs inside the HCF. The first MZI is set by two acoustic long-period gratings separated by a second MZI formed at the fiber and driver attaching region. We show that this setup enables frequency-tuning of the coupling between the fundamental and higher-order modes in the HCF. Additionally, we simulate and analyze the HCF modal couplings and MZIs' modulated spectra under distinct device parameters using the transfer matrix method. The new AOM-MZI enables tuning of the MZIs free spectral range by adjusting 1 Hz of the electrical frequency, which is promising to modulate multiwavelength filters, sensors and fiber lasers.

physics.optics↗
arXiv2024

Highly efficient compact acousto-optic modulator based on a hybrid-lattice hollow core fiber

We demonstrate the acousto-optic modulation of a hybrid-lattice hollow core fiber (HL-HCF) for the first time. For many years, optical fibers with reduced diameters have been the main solution to increase the interaction of acoustic and optical waves. However, the high drive voltages and large modulator components still employed drastically affect the efficiency and miniaturization of these devices. Here, we experimentally show that combining Kagomé and tubular lattices in HL-HCFs allows for enhancing the amplification of the acoustic waves and the modulation of the guided optical modes thus providing high modulation efficiency even when using a fiber with a 240 um diameter. To the best of our knowledge, the measured HL-HCF's modulation efficiency (1.3 dB/V) is the highest compared to devices employing reduced diameter fibers. Additionally, we demonstrate a compact acousto-optic modulator with driver dimensions smaller than the HL-HCF diameter. Overall, our results show a promising alternative to solve the compromise of speed, efficiency, and compactness for integration with microscale all-fiber photonic devices.

physics.optics↗
arXiv2024

Highly efficient interaction of a tubular-lattice hollow-core fiber and flexural acoustic waves: design, characterization and analysis

The modulation efficiency of a tubular-lattice hollow-core fiber (HCF) by means of flexural acoustic waves is investigated in detail for the first time. The main acousto-optic properties of the HCF are evaluated employing 2D and 3D models based on the finite element method. The induced coupling of the fundamental and first higher-order modes is simulated in the wavelength range from 743 to 1355 nm. Significant acoustic (amplitude, period, strain, energy) and optical parameters (effective index, beat length, birefringence, coupling coefficient) are analyzed. The simulations are compared to experimental results, indicating higher modulation performance in HCFs compared to standard optical fibers. In addition, useful insights into the design and fabrication of all-fiber acousto-optic devices based on HCFs are provided, enabling potential application in tunable spectral filters and mode-locked fiber lasers.

physics.optics↗
arXiv2024

High-temperature sensing using a hollow-core fiber with thick cladding tubes

We report on high-temperature sensing measurements using a tubular-lattice hollow-core photonic crystal fiber displaying a microstructure formed of eight 2.4 um-thick cladding tubes. The larger thickness of our fiber's cladding tubes compared to other hollow fibers operating in the visible and infrared ranges entails multiple narrow transmission bands in its transmission spectrum (6 bands in the spectral range between 400 nm and 950 nm) and benefits the realization of the temperature sensing measurements. The principle of operation of our device is based on the thermo-optic effect and thermal expansion-induced spectral shifts of the fiber transmission bands due to temperature variations. To study the sensor operation, we monitored the fiber transmission bands' spectral positions from room temperature to 1085 oC in both ramp-up and ramp-down scenarios. Additionally, we investigated the optimization opportunities by assessing an analytical model describing the fiber transmission characteristics and discussed the alternatives for enhancing the sensor performance. Moreover, our fiber characterization experiments revealed a consistent confinement loss trend aligned with the scaling laws in tubular-lattice hollow-core fibers. We thus understand that the results presented in this manuscript highlight a relevant path for the development of temperature sensors based on microstructured hollow-core optical fibers endowed with thick cladding tubes.

physics.optics↗
arXiv2023

All-fiber broadband spectral acousto-optic modulation of a tubular-lattice hollow-core optical fiber

We demonstrate a broadband acousto-optic notch filter based on a tubular-lattice hollow-core fiber for the first time. The guided optical modes are modulated by acoustically induced dynamic long-period gratings along the fiber. The device is fabricated employing a short interaction length (7.7 cm) and low drive voltages (10 V). Modulated spectral bands with 20 nm half-width and maximum depths greater than 60 % are achieved. The resonant notch wavelength is tuned from 743 to 1355 nm (612 nm span) by changing the frequency of the electrical signal. The results indicate a broader tuning range compared to previous studies using standard and hollow-core fibers. It further reveals unique properties for reconfigurable spectral filters and fiber lasers, pointing to the fast switching and highly efficient modulation of all-fiber photonic devices.

physics.optics↗
arXiv2023

Fabrication and characterization of iodine photonic microcell for sub-Doppler spectroscopy and laser stabilization

We report on the development of all-fiber stand-alone Iodine-filled Photonic Microcells demonstrating record absorption contrast at room temperature. The microcell s fiber is made of inhibited coupling guiding hollow-core photonic crystal fibers. The fiber-core loading with Iodine was undertaken at 10-1 - 10-2mbar vapor pressure using a novel gas-manifold based on metallic vacuum parts with ceramic coated inner surfaces for corrosion resistance. The fiber is then sealed on the tips and mounted on FC/APC connectors for better integration with standard fiber components. The stand-alone microcells display Doppler lines with contrasts up to 73% in the 633nm wavelength range, and an insertion loss between 3 to 4dB. Sub-Doppler spectroscopy based on saturable absorption has been carried out to resolve the hyperfine structure of the P(33)6-3 lines at room temperature with a full-width at half maximum of 24MHz on the b4 component with the help of lock-in amplification. Also, we demonstrate distinguishable hyperfine components on the R(39)6-3 line at room temperature without any recourse to signal-to-noise ratio amplification techniques.

physics.atom-ph↗
arXiv2022

Hollow-core fiber-based speckle displacement sensor

The research enterprise towards achieving high-performance hollow-core photonic crystal fibers has led to impressive advancements in the latest years. Indeed, using this family of fibers becomes nowadays an overarching strategy for building a multitude of optical systems ranging from beam delivery devices to optical sources and sensors. In most applications, an effective single-mode operation is desired and, as such, the fiber microstructure or the light launching setups are typically designed for achieving such a behavior. Alternatively, one can identify the use of large-core multimode hollow-core fibers as a promising avenue for the development of new photonic devices. Thus, in this manuscript, we propose and demonstrate the utilization of a large-core tubular-lattice fiber for accomplishing a speckle-based displacement sensor, which has been built up by inserting and suitably dislocating a single-mode fiber inside the void core of the hollow fiber. The work reported herein encompasses both simulation and experimental studies on the evolution of the multimode intensity distributions within the device as well as the demonstration of a displacement sensor with an estimated resolution of 0.7 μm. We understand that this investigation identifies a new opportunity for the employment of large-core hollow fibers within the sensing framework hence widening the gamut of applications of this family of fibers.

physics.optics↗
arXiv2022

Hollow-core fibers with reduced surface roughness and ultralow loss in the short-wavelength range

While optical fibers display excellent performances in the infrared, visible and ultraviolet ranges remain poorly addressed by them. Obtaining better fibers for the short-wavelength range has been restricted, in all fiber optics, by scattering processes. In hollow-core fibers, the scattering loss arises from the core roughness and represents the limiting factor in reducing their loss regardless of the fiber cladding confinement power. To attain fibers performing at short wavelengths, it is paramount developing means to minimize the height variations on the fiber microstructure boundaries. Here, we report on the reduction of the core surface roughness of hollow-core fibers by modifying their fabrication technique. In the novel process proposed herein, counter directional gas fluxes are applied within the fiber holes during fabrication to attain an increased shear rate on its microstructure. The effect of the process on the surface roughness has been quantified by optical profilometry and the results showed that the root-mean-square surface roughness has been reduced from 0.40 nm to 0.15 nm. The improvement in the fiber core surface quality entailed fibers with ultralow loss in the short-wavelength range. We report on fibers with record loss values as low as 50 dB/km at 290 nm, 9.7 dB/km at 369 nm, 5.0 dB/km at 480 nm, and 1.8 dB/km at 719 nm. The results reveal this new approach as a promising path for the development of hollow-core fibers guiding at short wavelengths with loss that can potentially be orders of magnitude lower than the ones achievable with their silica-core counterparts.

physics.optics↗
arXiv2022

Hollow-core photonic crystal fibers for Power-over-Fiber systems

Research achievements in hollow-core photonic crystal fibers technology allow ascertaining such fibers as outstanding platforms for delivering high-power laser beams. Indeed, the key property underlying the success of this family of optical fibers for high-power beam delivery is their capability of efficiently transmitting light through empty space with minimal interaction with the fiber microstructure. In this context, here we widen the framework of hollow-core fiber-based beam delivery applications by demonstrating their utilization as promising platforms for Power-over-Fiber systems. Thus, we report on the use of a tubular-lattice hollow-core fiber to deliver a watt-level continuous-wave laser beam onto a photovoltaic converter and activate a representative camera circuit. We believe that the experiments reported herein allow identifying hollow-core fibers as eligible candidates for next-generation Power-over-Fiber devices potentially able to lift the power restrictions of current solid-core fiber-based Power-over-Fiber systems.

physics.optics↗
arXiv2021

Enhancing fiber atom interferometer by in-fiber laser cooling

We demonstrate an inertia sensitive atom interferometer optically guided inside a 22-cm-long negative curvature hollow-core photonic crystal fiber with an interferometer time of 20 ms. The result prolongs the previous fiber guided atom interferometer time by three orders of magnitude. The improvement arises from the realization of in-fiber Λ-enhanced gray molasses and delta-kick cooling to cool atoms from 32 μK to below 1 μK in 4 ms. The in-fiber cooling overcomes the inevitable heating during the atom loading process and allows a shallow guiding optical potential to minimize decoherence. Our results permit bringing atoms close to source fields for sensing and could lead to compact inertial quantum sensors with a sub-millimeter resolution.

physics.atom-ph↗
arXiv2020

Low-loss single-mode hybrid-lattice hollow-core photonic crystal fiber

The remarkable recent demonstrations in ultralow loss Inhibited-Coupling (IC) hollow-core photonic crystal fibers (HCPCFs) place them as serious candidates for the next-generation of long-haul fiber optics systems. A hindrance to this prospect, but also to short-haul applications such as micromachining, where stable and high-quality beam delivery is needed, is the challenge to design and fabricate an IC-guiding fiber that combines ultra-low loss, truly and robust single-modeness, and polarization-maintaining operation. Design solutions proposed up to now require a trade-off between low loss and truly single modeness. Here, we propose a novel concept of IC HCPCF for obtaining low-loss and effective single-mode operation. The fiber is endowed with a hybrid cladding composed of a Kagome-tubular lattice (HKT). This new concept of microstructured cladding allows to significantly reduce confinement loss and, at the same time, preserving a truly and robust single-mode operation. Experimental results show a HKT-IC-HCPCF with a minimum loss figure of 1.6 dB/km at 1050 nm and a higher-order modes extinction ratio as high as 47.0 dB for a 10 m long fiber. The robustness of the fiber single-modeness was tested by moving the fiber and varying the coupling conditions. The design proposed herein opens a new route for the accomplishment of HCPCFs that combine robust ultralow loss transmission and single-mode beam delivery and provides new insight into the understanding of IC guidance.

physics.optics↗
arXiv2020

Superradiance from Lattice-Confined Atoms inside Hollow Core Fibre

Unravelling superradiance, also known as superfluorescence, relies on an ensemble of phase-matched dipole oscillators and the suppression of inhomogeneous broadening. Here we report on a novel superradiance platform that combines an optical lattice free from the ac Stark shift and a hollow-core photonic crystal fibre, enabling an extended atom-light interaction over $2 \mathrm{mm}$ free from the Doppler effect. This system allows controlling the atom spatial distribution and spectral homogeneity whilst efficiently coupling the radiation field to an optical fibre. The experimentally-observed and theoretically-corroborated temporal, spectral and spatial dynamic behaviours of the superradiance, e.g., superradiance ringing and density-dependent frequency shift, demonstrate a unique interplay between the trapped atoms and the fibre-guided field with multiple transverse modes. Our theory indicates the resulting temporal evolution of the guided light shows a minimal beam radius of $3.1 \mathrm{μm}$ that is three times smaller than that of the lowest-loss fibre mode.

physics.atom-ph↗
arXiv2020

Raman-free fibered photon-pair source

Raman-scattering noise in silica has been the key obstacle toward the realisation of high quality fiber-based photon-pair sources. Here, we experimentally demonstrate how to get past this limitation by dispersion tailoring a xenon-filled hollow-core photonic crystal fiber. The source operates at room temperature, and is designed to generate Raman-free photon-pairs at useful wavelength ranges, with idler at the telecom, and signal at a visible range. We achieve a coincidence-to-accidentals ratio (2) as high as 2740 combined with an ultra low heralded g H (0) = 0.002, indicating a very high signal to noise ratio and a negligible multi-photon emission probability. Moreover, by gas-pressure tuning, we demonstrate the control of photon frequencies over a range as large as 13 THz, covering S-C and L telecom band for the idler photon. This work demonstrates that hollow-core photonic crystal fiber is an excellent platform to design high quality photon-pair sources, and could play a driving role in the emerging quantum technology.

quant-ph↗