arXiv subjects

Filiberto Bilotti

Publications and source records attributed to Filiberto Bilotti.

26 records · Page 2Linked to original sources

arXiv2020

Waveform-Selective Mantle Cloaks for Intelligent Antennas

We present the design of an innovative wire antenna able to automatically hide or reveal its presence depending on the waveform of the received/transmitted signal. This unconventional behavior is achieved through the use of a novel waveform-selective cloaking metasurface exploiting a meander-like unit cell loaded with a lumped-element circuit capable to engineer the scattering of the antenna depending on the waveform of the impinging signal. Due to the time-domain response of the lumped-element circuit, the antenna is able switching its scattering behavior when interacts with either a pulsed wave (PW) or a continuous wave (CW) signal. The proposed configuration paves the way to a new generation of cloaking devices for intelligent antenna systems, extending the concept of antenna as a device capable to sense the external environment and change its electromagnetic behavior accordingly.

physics.class-ph↗

arXiv2020

A Topological Design Tool for the Synthesis of Antenna Radiation Patterns

Patch antennas are among the most popular radiating elements, yet their quasi-2-D structure reduces the degrees of freedom available to tailor their radiation pattern. To overcome this limitation, a possible solution consists in etching on a grounded substrate two concentric radiating elements and combining two modes (one for each element) with proper amplitude/phase relations. Although this technique leads, in principle, to an infinite number of possible configurations (i.e., each patch element can support an infinite number of modes), the theoretical and experimental verifications available in the literature are limited to the first two radiating modes (TM 11 and TM 21 ) of a circular patch antenna. Recently, we have shown that the design of this circular patch can be effectively performed by exploiting the topological properties of vortex fields and, in particular, by controlling the phase singularity exhibited by the higher order right-handed circularly polarized (RHCP) TM 21 mode of the circular patch. Since the number of RHCP higher order modes of a circular patch is infinite, we can in principle deal with an arbitrary number of phase singularity points, whose combined control leads to unprecedented possibilities to shape the radiation pattern of a circular patch. In this article, we present a complete design tool to determine the number and position of phase singularity points arising when combining the RHCP modes of a circular patch antenna and, eventually, manipulate them to synthesize the required radiation pattern. As a realistic application example, we show how the proposed tool can be used to effectively design a single antenna whose radiation pattern can be properly tailored to switch between two different states, i.e., a sector and a saddle shape, widely used in base stations for mobile and satellite communications, respectively.

physics.class-ph↗

arXiv2020

Waveguide Components and Aperture Antennas With Frequency- and Time-Domain Selectivity Properties

Filtering modules are essential devices of modern microwave systems given their capability to improve the signal-to-noise ratio of the received signal or to eliminate the unwanted interferences. For discriminating between different components, a filter exhibits a frequency-selective response that, however, is not able to distinguish between different signals whose spectrum falls within the passband of the filter itself. In this regard, some electromagnetic structures exhibiting, at the same frequency, different responses depending on the waveform of the incoming waves have been recently proposed. In this communication, we extend the aforementioned approach to the case of a standard waveguide filtering module. In particular, by loading a bandpass filtering iris with a proper lumped-element circuit, we design a waveguide component able to distinguish between different pulsed waves, even at the same frequency, depending on their pulsewidth. Moreover, by using this filter for capping an open-ended rectangular waveguide, a radiating element with both frequency- and time-domain selectivity properties is presented. The structures discussed in this communication may pave the way to a new class of microwave systems that, being both frequency selective and time selective, are less sensitive to noise and interferences.

physics.class-ph↗

arXiv2020

Surface Impedance Modeling of All-Dielectric Metasurfaces

We develop a simple and reliable analytical model that allows describing the electromagnetic response of all-dielectric metasurfaces consisting of a single-layer array of high-permittivity spherical particles. By combining Mie theory with a bi-dimensional homogenization approach, we derive closed-form expressions of the electric and magnetic surface impedances exhibited by the metasurface and, thus, its reflection and transmission coefficients. The effectiveness of the proposed approach is validated through a set of full-wave simulations. The availability of the analytical model here developed allows a more in-depth understanding of the complex scattering response of these electromagnetic structures and enables the design of innovative devices operating throughout the whole electromagnetic spectrum, including, for example, unconventional reflectors for antennas, broadband optical mirrors, and highly efficient nanoantenna reflectarrays.

physics.class-ph↗

arXiv2016

Tunable scattering cancellation cloak with plasmonic ellipsoids in the visible

The scattering cancellation technique is a powerful tool to reduce the scattered field from electrically small objects in a specific frequency window. The technique relies on covering the object of interest with a shell that scatters light into the far field of equal strength as the object, but $π$ out-of-phase. The resulting destructive interference prohibits its detection in measurements that probe the scattered light. Whereas at radio or microwave frequencies feasible designs have been proposed that allow to tune the operational frequency upon request, similar capabilities have not yet been explored in the visible. However, such ability is decisive to capitalize on the technique in many envisioned applications. Here, we solve the problem and study the use of small metallic nanoparticles with an ellipsoidal shape as the material from which the shell is made to build an isotropic geometry. Changing the aspect ratio of the ellipsoids allows to change the operational frequency. The basic functionality is explored with two complementary analytical approaches. Additionally, we present a powerful multiscattering algorithm that can be used to perform full wave simulations of clusters of arbitrary particles. We utilize this method to analyze the scattering of the presented designs numerically. Hereby we provide useful guidelines for the fabrication of this cloak with self-assembly methods by investigating the effects of disorder.

physics.optics↗

arXiv2008

Plasmonic metamaterial cloaking at optical frequencies

In this paper, we present the design of cylindrical and spherical electromagnetic cloaks working at visible frequencies. The cloak design is based on the employment of layered structures consisting of alternating plasmonic and non-plasmonic materials and exhibiting the collective behavior of an effective epsilon-near-zero material at optical frequencies. The design of a cylindrical cloak to hide cylindrical objects is firstly presented. Two alternative layouts are proposed and both magnetic and non-magnetic objects are considered. Then, the design of spherical cloaks is also presented. The full-wave simulations presented throughout the paper confirm the validity of the proposed setup, and show how this technique can be used to reduce the observability of cylindrical and spherical objects. The effect of the losses is also considered.

physics.optics↗

arXiv2008

Split ring resonator-coupled enhanced transmission through a single subwavelength aperture

We report the enhanced transmission of electromagnetic waves through a single subwavelength aperture by making use of the resonance behavior of a split ring resonator (SRR) at microwave frequencies. By placing a single SRR at the near-field of the aperture, strongly localized electromagnetic fields are effectively coupled to the aperture with a radius that is twenty times smaller than the resonance wavelength. We obtained 740-fold transmission enhancement by exciting the electric resonance of SRR. A different coupling mechanism, through the magnetic resonance of SRR, is also verified to yield enhanced transmission. Good agreement is obtained between the microwave measurements and numerical simulations.

physics.optics↗

arXiv2004

Metamaterial covers over a small aperture

Recently, it has been experimentally shown by several other researchers in the physics community that a properly designed periodic corrugation of a metallic opaque screen may significantly enhance the power transmission through a sub-wavelength hole in the optical frequency band. Oliner, Jackson and their co-workers explained and justified this phenomenon as the result of the excitation of the leaky waves supported by the corrugated screen. Here we suggest another setup, in which metamaterial layers with special parameters may be utilized as covers over a single sub-wavelength aperture in a perfectly electric conducting (PEC) flat screen in order to increase the wave transmission through this aperture, and we provide a detailed analytical explanation for this aperture setup that may lead to similar, more pronounced effects when the metamaterial layers are used in the entrance and the exit face of the hole in the flat PEC screen with no corrugation. Some physical insights into the function of these covers and some numerical results confirming this theory are presented and discussed. We also discuss the sensitivity of the transmission enhancement to the geometrical and electromagnetic parameters of this structure.

cond-mat.mtrl-sci↗