arXiv subjects

Flavien Gyger

Publications and source records attributed to Flavien Gyger.

9 recordsLinked to original sources

arXiv2026

Velocity-Enabled Quantum Computing with Neutral Atoms

Realizing error-corrected logical qubits is a central goal for the current development of digital quantum computers. Neutral atoms offer the opportunity to coherently shuttle atoms for realizing efficient quantum error correction based on long-range connectivity and parallel atom transport. Nevertheless, time overheads in shuttling atoms and complex control hardware pose challenges to scaling current architectures. Here, we introduce atom velocity as a new degree of freedom in neutral-atom architectures tailored to quantum error correction. Through controlled Doppler shifts, we demonstrate velocity-selective mid-circuit state preparation and measurement on moving atoms, leaving spectator atoms unaffected. Furthermore, we achieve on-the-fly local single-qubit rotations by mapping micron-scale atom displacements to the spatial phase of global control beams. Complementing these techniques with CZ entangling gates with a fidelity of 99.86(4)%, we experimentally implement key primitives for quantum error correction and measurement-based quantum computing. We generate an eight-qubit entangled cluster state with an average stabilizer value of 0.830(4), realize an [[4,2,2]] error-detection code with 99.0(3) % logical Bell-state fidelity, and perform stabilizer measurements using a flying ancilla. By enabling selective operations on continuously moving atoms using only global beams, this velocity-enabled architecture reduces hardware overhead while minimizing shuttling and transfer delays, opening a new pathway for fast, large-scale atom-based quantum computation.

quant-ph↗

arXiv2025

Universal gates for a metastable qubit in strontium-88

Metastable atomic qubits are a highly promising platform for the realization of quantum computers, owing to their scalability and the possibility of converting leakage errors to erasure errors mid-circuit. Here, we demonstrate and characterize a universal gate set for the metastable fine-structure qubit encoded between the $^3\text{P}_0$ and $^3\text{P}_2$ states in bosonic strontium-88. We find single-qubit gate fidelities of 0.993(1), and two-qubit gate fidelities of 0.9945(6) after correcting for losses during the gate operation. Furthermore, we present a novel state-resolved detection scheme for the two fine-structure states that enables high-fidelity detection of qubit loss. Finally, we leverage the existence of a stable ground state outside the qubit subspace to perform mid-circuit erasure conversion using fast destructive imaging. Our results establish the strontium fine-structure qubit as a promising candidate for near-term error-corrected quantum computers, offering unique scaling perspectives.

quant-ph↗

arXiv2025

Dynamical spatial light modulation in the ultraviolet spectral range

Spatial light modulators enable arbitrary control of the intensity of optical light fields and facilitate a variety of applications in biology, astronomy and atomic, molecular and optical physics. For coherent light fields, holography, implemented through arbitrary phase modulation, represents a highly power-efficient technique to shape the intensity of light patterns. Here, we introduce and benchmark a novel spatial light modulator based on a piston micro-mirror array. In particular, we utilize the reflection-based device to demonstrate arbitrary beam shaping in the ultraviolet regime at a wavelength of 322 nm. We correct aberrations of the reflected wavefront and show that the modulator does not add detectable excess phase noise to the reflected light field. We utilize the intrinsically low latency of the architecture to demonstrate fast switching of arbitrary light patterns synchronized with short laser pulses at an update rate of 1 kHz. Finally, we outline how the modulator can act as an important component of a zone-based architecture for a neutral-atom quantum computer or simulator, including ultraviolet wavelengths.

physics.optics↗

arXiv2024

Realization of a fast triple-magic all-optical qutrit in strontium-88

The optical clock states of alkaline earth and alkaline earth-like atoms are the fundament of state-of-the-art optical atomic clocks. An important prerequisite for the operation of optical clocks are magic trapping conditions, where electronic and motional dynamics decouple. Here, we identify and experimentally demonstrate simultaneous magic trapping for two clock transitions in strontium-88, realizing so-called triple-magic conditions at a specially chosen magic angle. Under these conditions, we operate an all-optical qutrit comprising the ground state $^1S_0$, and the two metastable clock states $^3P_0$ and $^3P_2$. We demonstrate fast optical control in an atom array using two- and three-photon couplings to realize high-fidelity manipulation between all qutrit states. At the magic angle, we probe the coherence achievable in magic-angle-tuned traps and find atom-atom coherence times between the metastable states as long as 715(30) ms. Our work opens several new directions, including qutrit-based quantum metrology on optical transitions and high-fidelity and high-coherence manipulation on the strontium-88 fine-structure qubit.

physics.atom-ph↗

arXiv2024

Continuous operation of large-scale atom arrays in optical lattices

Scaling the size of assembled neutral-atom arrays trapped in optical lattices or optical tweezers is an enabling step for a number of applications ranging from quantum simulations to quantum metrology. However, preparation times increase with system size and constitute a severe bottleneck in the bottom-up assembly of large ordered arrays from stochastically loaded optical traps. Here, we demonstrate a novel method to circumvent this bottleneck by recycling atoms from one experimental run to the next, while continuously reloading and adding atoms to the array. Using this approach, we achieve densely-packed arrays with more than 1000 atoms stored in an optical lattice, continuously refilled with a net 2.5 seconds cycle time and about 130 atoms reloaded during each cycle. Furthermore, we show that we can continuously maintain such large arrays by simply reloading atoms that are lost from one cycle to the next. Our approach paves the way towards quantum science with large ordered atomic arrays containing thousands of atoms in continuous operation.

quant-ph↗

arXiv2023

High-fidelity detection of large-scale atom arrays in an optical lattice

Recent advances in quantum simulation based on neutral atoms have largely benefited from high-resolution, single-atom sensitive imaging techniques. A variety of approaches have been developed to achieve such local detection of atoms in optical lattices or optical tweezers. For alkaline-earth and alkaline-earth-like atoms, the presence of narrow optical transitions opens up the possibility of performing novel types of Sisyphus cooling, where the cooling mechanism originates from the capability to spatially resolve the differential optical level shifts in the trap potential. Up to now, it has been an open question whether high-fidelity imaging could be achieved in a "repulsive Sisyphus" configuration, where the trap depth of the ground state exceeds that of the excited state involved in cooling. Here, we demonstrate high-fidelity ($99.971(1)\%$) and high-survival ($99.80(5)\%$) imaging of strontium atoms using repulsive Sisyphus cooling. We use an optical lattice as a pinning potential for atoms in a large-scale tweezer array with up to $399$ tweezers and show repeated, high-fidelity lattice-tweezer-lattice transfers. We furthermore demonstrate loading the lattice with approximately 10000 atoms directly from the MOT and scalable imaging over $>10000$ lattice sites with a combined survival probability and classification fidelity better than $99.2\%$. Our lattice thus serves as a locally addressable and sortable reservoir for continuous refilling of optical tweezer arrays in the future.

physics.atom-ph↗

arXiv2021

Large evanescently-induced Brillouin scattering at the surrounding of a nanofibre

Brillouin scattering has been widely exploited for advanced photonics functionalities such as microwave photonics, signal processing, sensing, lasing, and more recently in micro- and nano-photonic waveguides. So far, all the works have focused on the opto-acoustic interaction driven from the core region of micro- and nano-waveguides. Here we observe, for the first time, an efficient Brillouin scattering generated by an evanescent field nearby a sub-wavelength waveguide embedded in a pressurised gas cell, with a maximum gain coefficient of $18.90 \pm 0.17$ m$^{-1}$W$^{-1}$. This gain is 11 times larger than the highest Brillouin gain obtained in a hollow-core fibre and 79 times larger than in a standard single-mode fibre. The realisation of strong free-space Brillouin scattering from a waveguide benefits from the flexibility of confined light while providing a direct access to the opto-acoustic interaction, as required in free-space optoacoustics such as Brillouin spectroscopy and microscopy. Therefore, our work creates an important bridge between Brillouin scattering in waveguides, Brillouin spectroscopy and microscopy, and opens new avenues in light-sound interactions, optomechanics, sensing, lasing and imaging.

physics.optics↗

arXiv2019

Giant Brillouin amplification in gas using hollow-core waveguides

Stimulated Brillouin scattering (SBS) offers among the highest nonlinear gains in solid materials and has demonstrated advanced photonics functionalities in waveguides. The large compressibility of gases suggests that SBS may gain in efficiency with respect to condensed materials. Here, by using a gas-filled hollow-core fibre at high pressure, we achieve a strong Brillouin amplification per unit length, exceeding by 6 times the gain observed in fibres with a solid silica core. This large amplification benefits from a higher molecular density and a lower acoustic attenuation at higher pressure, combined with a tight light confinement. Using this approach, we demonstrate the capability to perform large optical amplifications in hollow-core waveguides. The implementations of a low-threshold gas Brillouin fibre laser and a high-performance distributed temperature sensor, intrinsically free of strain cross-sensitivity, illustrate the large perspectives for hollow-core fibres, paving the way to their integration into lasing, sensing and signal processing.

physics.optics↗

arXiv2019

Observation of stimulated Brillouin scattering in silicon nitride integrated waveguides

Silicon nitride (Si3N4) has emerged as a promising material for integrated nonlinear photonics and has been used for broadband soliton microcombs and low-pulse-energy supercontinuum generation. Therefore understanding all nonlinear optical properties of Si3N4 is important. So far, only stimulated Brillouin scattering (SBS) has not been reported. Here we observe, for the first time, backward SBS in fully cladded Si3N4 waveguides. The Brillouin gain spectrum exhibits an unusual multi-peak structure resulting from hybridization with with high-overtone bulk acoustic resonances (HBARs) of the silica cladding. The reported intrinsic Si3N4 Brillouin gain at 25 GHz is estimated as 7x10^-13 m/W. Moreover, the magnitude of the Si3N4 photoelastic constant is estimated as |p12| = 0.047 +/- 0.004. Since SBS imposes an optical power limitation for waveguides, our results explain the capability of Si3N4 to handle high optical power, central for integrated nonlinear photonics.

physics.optics↗