arXiv subjects

Flavio C. Cruz

Publications and source records attributed to Flavio C. Cruz.

17 recordsLinked to original sources

arXiv2019

Nonlinear silicon waveguides generating broadband, spectrally engineered frequency combs spanning 2.0-8.5 um

Nanophotonic waveguides with sub-wavelength mode confinement and engineered dispersion profiles are an excellent platform for application-tailored nonlinear optical interactions at low pulse energies. Here, we present fully air clad suspended-silicon waveguides for infrared frequency comb generation with optical bandwidth limited only by the silicon transparency. The achieved spectra are lithographically tailored to span 2.1 octaves in the mid-infrared (2.0-8.5 um or 1170--5000 cm-1) when pumped at 3.10 um with 100 pJ pulses. Novel fork-shaped couplers provide efficient input coupling with only 1.5 dB loss. The coherence, brightness, and the stability of the generated light are highlighted in a dual frequency comb setup in which individual comb-lines are resolved with 30 dB extinction ratio and 100 MHz spacing in the wavelength range of 4.8-8.5 um (2100-1170 cm-1). These sources are used for broadband gas- and liquid-phase dual-comb spectroscopy with 100 MHz comb-line resolution. We achieve a peak spectral signal-to-noise ratio of 10 Hz^0.5 across a simultaneous bandwidth containing 112,200 comb-lines. These results provide a pathway to further integration with the developing high repetition rate frequency comb lasers for compact sensors with applications in chip-based chemical analysis and spectroscopy.

physics.optics↗

arXiv2018

$χ^{(2)}$ mid-infrared frequency comb generation and stabilization with few-cycle pulses

Mid-infrared laser frequency combs are compelling sources for precise and sensitive metrology with applications in molecular spectroscopy and spectro-imaging. The infrared atmospheric window between 3-5.5 $μ$m in particular provides vital information regarding molecular composition. Using a robust, fiber-optic source of few-cycle pulses in the near-infrared, we experimentally demonstrate ultra-broad bandwidth nonlinear phenomena including harmonic and difference frequency generation in a single pass through periodically poled lithium niobate (PPLN). These $χ^{(2)}$ nonlinear optical processes result in the generation of frequency combs across the mid-infrared atmospheric window which we employ for dual-comb spectroscopy of acetone and carbonyl sulfide with resolution as high as 0.003 cm$^{-1}$. Moreover, cascaded $χ^{(2)}$ nonlinearities in the same PPLN directly provide the carrier-envelope offset frequency of the near-infrared driving pulse train in a compact geometry.

physics.optics↗

arXiv2018

Infrared electric-field sampled frequency comb spectroscopy

Molecular spectroscopy in the mid-infrared portion of the electromagnetic spectrum (3--25 um) has been a cornerstone interdisciplinary analytical technique widely adapted across the biological, chemical, and physical sciences. Applications range from understanding mesoscale trends in climate science via atmospheric monitoring to microscopic investigations of cellular biological systems via protein characterization. Here, we present a compact and comprehensive approach to infrared spectroscopy incorporating the development of broadband laser frequency combs across 3--27 um, encompassing the entire mid-infrared, and direct electric-field measurement of the corresponding near single-cycle infrared pulses of light. Utilizing this unified apparatus for high-resolution and accurate frequency comb spectroscopy, we present the infrared spectra of important atmospheric compounds such as ammonia and carbon dioxide in the molecular fingerprint region. To further highlight the ability to study complex biological systems, we present a broadband spectrum of a monoclonal antibody reference material consisting of more than 20,000 atoms. The absorption signature resolves the amide I and II vibrations, providing a means to study secondary structures of proteins. The approach described here, operating at the boundary of ultrafast physics and precision spectroscopy, provides a table-top solution and a widely adaptable technique impacting both applied and fundamental scientific studies.

physics.ins-det↗

arXiv2018

Mid-infrared frequency comb generation via cascaded quadratic nonlinearities in quasi-phase-matched waveguides

We experimentally demonstrate a simple configuration for mid-infrared (MIR) frequency comb generation in quasi-phase-matched lithium niobate waveguides using the cascaded-$χ^{(2)}$ nonlinearity. With nanojoule-scale pulses from an Er:fiber laser, we observe octave-spanning supercontinuum in the near-infrared with dispersive-wave generation in the 2.5--3 $\textμ$m region and intra-pulse difference-frequency generation in the 4--5 $\textμ$m region. By engineering the quasi-phase-matched grating profiles, tunable, narrow-band MIR and broadband MIR spectra are both observed in this geometry. Finally, we perform numerical modeling using a nonlinear envelope equation, which shows good quantitative agreement with the experiment---and can be used to inform waveguide designs to tailor the MIR frequency combs. Our results identify a path to a simple single-branch approach to mid-infrared frequency comb generation in a compact platform using commercial Er:fiber technology.

physics.optics↗

arXiv2017

Dual frequency comb spectroscopy in the molecular fingerprint region

Spectroscopy in the molecular fingerprint spectral region (6.5-20 $μ$m) yields critical information on material structure for physical, chemical and biological sciences. Despite decades of interest and effort, this portion of the electromagnetic spectrum remains challenging to cover with conventional laser technologies. In this report, we present a simple and robust method for generating super-octave, optical frequency combs in the fingerprint region through intra-pulse difference frequency generation in an orientation-patterned gallium phosphide crystal. We demonstrate the utility of this unique coherent light source for high-precision, dual-comb spectroscopy in methanol and ethanol vapor. These results highlight the potential of laser frequency combs for a wide range of molecular sensing applications, from basic molecular spectroscopy to nanoscopic imaging.

physics.optics↗

arXiv2017

Versatile silicon-waveguide supercontinuum for coherent mid-infrared spectroscopy

Infrared spectroscopy is a powerful tool for basic and applied science. The molecular spectral fingerprints in the 3 um to 20 um region provide a means to uniquely identify molecular structure for fundamental spectroscopy, atmospheric chemistry, trace and hazardous gas detection, and biological microscopy. Driven by such applications, the development of low-noise, coherent laser sources with broad, tunable coverage is a topic of great interest. Laser frequency combs possess a unique combination of precisely defined spectral lines and broad bandwidth that can enable the above-mentioned applications. Here, we leverage robust fabrication and geometrical dispersion engineering of silicon nanophotonic waveguides for coherent frequency comb generation spanning 70 THz in the mid-infrared (2.5 um to 6.2 um). Precise waveguide fabrication provides significant spectral broadening and engineered spectra targeted at specific mid-infrared bands. We use this coherent light source for dual-comb spectroscopy at 5 um.

physics.optics↗

arXiv2016

Rapid, broadband spectroscopic temperature measurement of CO2 using VIPA spectroscopy

Time-resolved spectroscopic temperature measurements of a sealed carbon dioxide sample cell were realized with an optical frequency comb combined with a two-dimensional dispersive spectrometer. A supercontinuum laser source based on an erbium fiber mode-locked laser was employed to generate coherent light around 2000 nm (5000 cm-1). The laser was passed through a 12-cm long cell containing CO2, and the transmitted light was analyzed in a virtually imaged phased array- (VIPA-) based spectrometer. Broadband spectra spanning more than 100 cm-1 with a spectral resolution of roughly 0.075 cm-1 (2.2 GHz) were acquired with an integration period of 2 ms. The temperature of the CO2 sample was deduced from fitting a modeled spectrum to the line intensities of the experimentally acquired spectrum. Temperature dynamics on the time scale of milliseconds were observed with a temperature resolution of 2.6 K. The spectroscopically-deduced temperatures agreed with temperatures of the sample cell measured with a thermistor. Potential applications of this technique include quantitative measurement of carbon dioxide concentration and temperature dynamics in gas-phase chemical reactions (e.g., combustion), and plasma diagnostics.

physics.optics↗

arXiv2015

Mid-Infrared Optical Frequency Combs based on Difference Frequency Generation for Molecular Spectroscopy

Mid-infrared femtosecond optical frequency combs were produced by difference frequency generation of the spectral components of a near-infrared comb in a 3-mm-long MgO:PPLN crystal. We observe strong pump depletion and 9.3 dB parametric gain in the 1.5 μm signal, which yields powers above 500 mW (3 μW/mode) in the idler with spectra covering 2.8 μm to 3.5 μm. Potential for broadband, high-resolution molecular spectroscopy is demonstrated by absorption spectra and interferograms obtained by heterodyning two combs.

physics.optics↗

arXiv2013

Temperature limits in laser cooling of free atoms with three-level cascade transitions

We employ semiclassical theoretical analysis to study laser cooling of free atoms using three-level cascade transitions, where the upper transition is much weaker than the lower one. This represents an alternate cooling scheme, particularly useful for group II atoms. We find that temperatures below the Doppler limits associated with each of these transitions are expected. The lowest temperatures arise from a remarkable increase in damping and reduced diffusion compared to two-level cooling. They are reached at the two-photon resonance, where there is a crossing between the narrow and the partially-dark dressed states, and can be estimated simply by the usual Doppler limit considering the decay rate of the optical coherence between these states.

physics.atom-ph↗

arXiv2009

Full Nonlinear Conversion of Broadband Frequency Combs generated by Four-Wave Mixing in Highly Nonlinear Fibers

We generate a 200-nm optical frequency comb at 1.5 microns by injecting two single-frequency lasers into a highly nonlinear fiber, and explore its spectral phase properties and high power to demonstrate full nonlinear conversion into its second harmonic. Combs of optical frequencies with 100-nm (~ 48 THz) bandwidths, centered at 790-800 nm and spaced by 0.8-1 nm (380-470 GHz) were produced by second harmonic and multiple sum frequency generation simply by focusing into a 2-mm long nonlinear crystal. Conventional birefringence phase matching was used in normal incidence configuration without tilting the crystal.

physics.optics↗

arXiv2008

Optical Frequency Combs Generated by Four-Wave Mixing in Optical Fibers for Astrophysical Spectrometer Calibration and Metrology

Optical frequency combs generated by multiple four-wave mixing of two stabilized single-frequency lasers in optical fibers are proposed for use as high precision frequency markers, calibration of astrophysical spectrometers and metrology. Use of highly nonlinear and photonic crystal fibers with very short lengths and small group velocity dispersion, combined with energy and momentum conservation required by the parametric generation, assures negligible phase mismatch between comb frequencies. In contrast to combs from mode-locked lasers or microcavities, the absence of a resonator allows large tuning of the frequency spacing from tens of gigahertz to beyond teraHertz.

physics.optics↗

arXiv2006

Strong electromagnetically induced transparency in atomic media with large residual Doppler broadening

Electromagnetically induced transparency and coherent population trapping were observed in a hot (1000 K) calcium vapor embedded into an electrical gas discharge. Unexpectedly large transparencies (of up to 70%) were observed under very unfavorable conditions: probe wavelength shorter than the coupling wavelength, and coupling Rabi frequency significantly smaller than the residual Doppler linewidth of the two photon transition. We developed a theoretical model that shows that the observed results are due to the combined effects of a strong probe beam and a small open character of the atomic system. Coherent population trapping also manifests itself as a change in the impedance of the gas discharge, and the phenomenon can be probed with high sensitivity via the optogalvanic effect.

quant-ph↗

arXiv2006

Coherent Quantum Engineering of Free-Space Laser Cooling

We perform a quantitative analysis of the cooling dynamics of three-level atomic systems interacting with two distinct lasers. Employing sparse-matrix techniques, we find numerical solutions to the fully quantized master equation in steady state. Our method allows straightforward determination of laser-cooling temperatures without the ambiguity often accompanied by semiclassical calculations, and more quickly than non-sparse techniques. Our calculations allow us to develop an understanding of the regimes of cooling, as well as a qualitative picture of the mechanism, related to the phenomenon of electromagnetically induced transparency. Effects of the induced asymmetric Fano-type lineshapes affect the detunings required for optimum cooling, as well as the predicted minimum temperatures which can be lower than the Doppler limit for either transition.

physics.atom-ph↗

arXiv2006

Tapered semiconductor amplifiers for optical frequency combs in the near infrared

A tapered semiconductor amplifier is injection seeded by a femtosecond optical frequency comb at 780 nm from a mode-locked Ti:sapphire laser. Energy gains over 17 dB (12 dB) are obtained for 1 mW (20 mW) of average input power when the input pulses are stretched into the picosecond range. A spectral window of supercontinuum light generated in a photonic fiber has also been amplified. Interferometric measurements show sub-hertz linewidths for a heterodyne beat between the input and amplified comb components, yielding no detectable phase-noise degradation under amplification. These amplifiers can be used to boost the infrared power in f-to-2f interferometers used to determine the carrier-to-envelope offset frequency, with clear advantages for stabilization of octave-spanning femtosecond lasers and other supercontinuum light sources with very limited power in the infrared.

physics.optics↗

arXiv2006

Efficient 1 GHz Ti:sapphire laser with improved broadband continuum in the infrared

We demonstrate a 1 GHz prismless femtosecond Ti:sapphire ring laser which emits 890 mW for 7.6W of pump power over a continuum extending from 585 to 1200 nm at -20 dB below the maximum. A broadband continuum is obtained without careful mirror dispersion compensation, with the net cavity group-delay-dispersion having -50 to +100 fs2 oscillations from 700 to 900 nm. Further broadening is obtained by use of a slightly convex cavity mirror that increases self-phase modulation. 17% (75%) of the intracavity (output) power is generated in single-pass through the crystal, outside the cavity bandwidth and concentrated in the low gain infrared region from 960 to 1200 nm. This laser seems well suited for optical frequency metrology, possibly allowing easier stabilization of the carrier-to-envelope offset frequency without use of photonic fibers.

physics.optics↗

arXiv2006

High resolution atomic coherent control via spectral phase manipulation of an optical frequency comb

We demonstrate high resolution coherent control of cold atomic Rubidium utilizing spectral phase manipulation of a femtosecond optical frequency comb. Transient coherent accumulation is directly manifested by the enhancement of signal amplitude and spectral resolution via the pulse number. The combination of frequency comb technology and spectral phase manipulation enables coherent control techniques to enter a new regime with natural linewidth resolutions.

physics.atom-ph↗

arXiv2003

Two-Photon Doppler cooling of alkaline-earth-metal and ytterbium atoms

A new possibility of laser cooling of alkaline-earth-metal and Ytterbium atoms using a two-photon transition is analyzed. We consider a $^{1}S_{0}$ - $^{1}S_{0}$ transition, with excitation in near resonance with the $^{1}P_{1}$ level. This greatly increases the two-photon transition rate, allowing an effective transfer of momentum. The experimental implementation of this technique is discussed and we show that for Calcium, for example, two-photon cooling can be used to achieve a Doppler limit of 123 microKelvin. The efficiency of this cooling scheme and the main loss mechanisms are analyzed.

physics.atom-ph↗