arXiv subjects

Flavio Travasso

Publications and source records attributed to Flavio Travasso.

3 recordsLinked to original sources

arXiv2026

In-situ total scattering investigation of crystalline ordering in amorphous ion-beam sputtered thin films for interferometric gravitational wave detectors

Amorphous tantala is an important optical material used in a number of high-precision optical applications, including gravitational wave interferometry. In this paper, we study in-situ the structural changes that occur in amorphous ion-beam sputtered coatings during an annealing treatment by means of a synchrotron radiation scattering experiment. The scattering signal is measured as a function of time on a large range of the Q-space. X-Ray diffraction and Rietveld analysis are used to study crystallization during the annealing treatment, whereas pair distribution function analysis allows to inspect the structural changes occurring during the amorphous to crystalline transition. Our findings indicate that several structural rearrangements occur in parallel, namely a first quick establishment of a backbone structure in the cationic substructure appearing on a rather extended range (up to 100 Angstrom), followed by a progressive rearrangement of the oxygen atoms environment which gradually increases the crystallinity of the structure.

cond-mat.mtrl-sci↗

arXiv2025

A cryogenic test-mass suspension with flexures operating in compression for third-generation gravitational-wave detectors

This paper presents an analysis of the conceptual design of a novel silicon suspension for the cryogenic test-mass mirrors of the low-frequency detector of the Einstein Telescope gravitational-wave observatory. In traditional suspensions, tensional stress is a severe limitation for achieving low thermal noise, safer mechanical margins and high thermal conductance simultaneously. In order to keep the tensional stress sufficiently low, we propose the use of rigid beams with large cross sections, combined with short flexures under compressional load. This configuration takes advantage of the many times higher strength of silicon in compression to respect to its strength in tension. The flexures are mechanically robust and at the same time soft in the working direction, thus producing low suspension thermal noise and, by being short, provide high thermal conductance for cryogenic cooling. The rigid beams, located between the test mass and an intermediate mass, allow the elimination of the recoil mass used conventionally for applying control forces for interferometer lock, and the use of optical anti-springs to reduce the pendulum resonant frequency to further improve the vibration isolation of the test mass. The configuration has the capability to reach a lower mirror operational temperature, which is expected to produce a substantial reduction of the thermal noise in the mirrors of the interferometer.

gr-qc↗

arXiv2021

Cryogenic suspension design for a kilometer-scale gravitational-wave detector

We report the mirror suspension design for Large-scale Cryogenic Gravitational wave Telescope, KAGRA, during bKAGRA Phase 1. Mirror thermal noise is one of the fundamental noises for room-temperature gravitational-wave detectors such as Advanced LIGO and Advanced Virgo. Thus, reduction of thermal noise is required for further improvement of their sensitivity. One effective approach for reducing thermal noise is to cool the mirrors. There are many technical challenges that must be overcome to cool the mirrors, such as cryocooler induced vibrations, thermal drift in suspensions, and reduction in duty cycling due to the increased number of potential failure mechanisms. Our mirror suspension has a black coating that makes radiative cooling more efficient. For conduction cooling, we developed ultra high purity aluminum heat links, which yield high thermal conductivity while keeping the spring constant sufficiently small. A unique inclination adjustment system, called moving mass, is used for aligning the mirror orientation in pitch. Photo-reflective displacement sensors, which have a large range, are installed for damping control on marionette recoil mass and intermediate recoil mass. Samarium cobalt magnets are used for coil-magnet actuators to prevent significant change of magnetism between room temperature and cryogenic temperature. In this paper, the design of our first cryogenic payload and its performance during bKAGRA Phase 1 are discussed.

physics.ins-det↗