arXiv subjects

Florence Laurent

Publications and source records attributed to Florence Laurent.

11 recordsLinked to original sources

arXiv2026

4MOST Low Resolution Spectrographs Characterization in Chile

4MOST, the 4m Multi Object Spectroscopic Telescope, is the optical, fibre-fed, MOS facility for the VISTA telescope at ESO's Paranal Observatory in Chile. Its main science drivers are in the fields of galactic archeology, high-energy physics, galaxy evolution and cosmology. The 4MOST consortium consists of several institutes in Europe and Australia under leadership of the Leibniz-Institut fur Astrophysik Potsdam (AIP). This paper focuses on the successful testing, installation and technical commissioning of the Low Resolution Spectrographs (LRS-A and B) for the 4MOST instrument at ESO's Paranal Observatory, Chile. This work was completed on October 18. 2025. Details on the assembly, integration, and performance of both 4MOST spectrographs from their arrival in the integration hall through to the telescope installation are provided. Attention is given to the optimization of procedures implemented to enhance performance and meet the expected top-level requirements. The 4MOST LRS features 2436 fibres split into two low-resolution spectrographs LRS-A and LRS-B (1624 fibres, three arms, 370-950 nm, R > 4000) and one high-resolution spectrograph (812 fibres, three arms, ~44-69 nm coverage each, R > 18000). The fibre positioner covers a hexagonal field of view of ~4.1 deg2. The fibers are 85 μm core with an output beam at f/3. The Centre de Recherche Astrophysique de Lyon (CRAL) had the full responsibility for the two low-resolution spectrographs. Each of them is composed of an off-axis Schmidt collimator that produces a 200 mm beam, which is split into three spectral arms by dichroics and directed to F/1.73 cameras with standard 6k x 6k 15 microns pixel CCD detectors.

astro-ph.IM↗

arXiv2026

ESO-VLT BlueMUSE instrument - Conceptual Design for Phase A

BlueMUSE is a blue-optimised, medium spectral resolution, panoramic integral field spectrograph under development for the ESO's Very Large Telescope (VLT). The project is now entering preliminary design phase. With an optimised transmission down to 350 nm, spectral resolution of R $\sim$ 3500 on average across the wavelength range, and a large FoV (1 arcmin2), BlueMUSE will open up a new range of galactic and extragalactic science cases facilitated by its specific capabilities. BlueMUSE consists of several subsystems arranged along the light path. A calibration unit reproduces the VLT's optical conditions, while the fore optics reshape the telescope's focal image. The splitting and relay optics divide the field of view into 16 channels, each feeding an integral field unit that contains an image slicer, a spectrograph, and a detector vessel. The image slicer converts the 2D sub-field into a 1D pseudo-slit, which the spectrograph disperses into spectra recorded by a 4k x 4k CCD in each detector vessel. A vacuum and cryogenic system cools the detectors, and the data reduction software processes the raw data into data cubes which are subsequently processed by a data analysis software system. All subsystems are supported by the instrument main structure and enclosed in a thermal housing for stability. The whole instrument is managed by an integrated control system combining electronics and software. This paper summarizes the baseline architecture, interfaces, and functional descriptions of the BlueMUSE instrument at the start of Design Phase. This architecture is derived from the top-level requirements and the experience acquired from MUSE. It presents the global concepts along with their preliminary performance estimates.

astro-ph.IM↗

arXiv2026

Design and Testing of the Motorized 2-DoF Folding Mirror 1 for the VLT BlueMUSE Instrument

BlueMUSE is a blue-optimized, medium spectral resolution, panoramic integral field spectrograph under development for the Very Large Telescope (VLT). The project is now fully entering the design phase. With an optimized transmission down to 350 nm, spectral resolution of R$\sim$3500 on average across the wavelength range, and a large FoV (1 arcmin), BlueMUSE will open up a new range of galactic and extragalactic science cases facilitated by its specific capabilities. In this paper, we present the design, implementation and evaluation of the motorized mount developed for Folding Mirror 1 (FM1) of the VLT BlueMUSE instrument. The mount provides two degrees of freedom in tip and tilt and is engineered to correct misalignments caused by environmental variations. The preliminary results demonstrate that the motorized FM1 tilt mount achieves the required precision and maintains alignment stability within the tight tolerances defined by the BlueMUSE project.

astro-ph.IM↗

arXiv2026

Motorized Mount for the 3-DoF Folding Mirror 2 of the VLT's BlueMUSE Instrument

BlueMUSE is a blue-optimized, medium spectral resolution, panoramic integral field spectrograph under development for the Very Large Telescope (VLT). The project is now fully entering design phase. With an optimized transmission down to 350 nm, spectral resolution of R~3500 on average across the wavelength range, and a large FoV (1 arcmin2), BlueMUSE will open up a new range of galactic and extragalactic science cases facilitated by its specific capabilities. To meet the stability demands required for BlueMUSE, motorized mounts for precise and repeatable positioning of key optics are developed. This paper explores candidate mechanical designs for BlueMUSE's Folding Mirror 2 (FM2), a high-precision mirror mount with three degrees-of-freedom: tip, tilt rotations, and vertical translation. The study includes a comparative performance analysis through theoretical simulations, details the mechanical, software and electronics architecture of the chosen design, as well as the dedicated optical setup design to characterize repeatability, precision, and thermal stability. The resulting performance of the chosen FM2 mount is then evaluated against the specified requirements for BlueMUSE.

astro-ph.IM↗

arXiv2024

The Blue Multi Unit Spectroscopic Explorer (BlueMUSE) on the VLT: science drivers and overview of instrument design

BlueMUSE is a blue-optimised, medium spectral resolution, panoramic integral field spectrograph under development for the Very Large Telescope (VLT). With an optimised transmission down to 350 nm, spectral resolution of R$\sim$3500 on average across the wavelength range, and a large FoV (1 arcmin$^2$), BlueMUSE will open up a new range of galactic and extragalactic science cases facilitated by its specific capabilities. The BlueMUSE consortium includes 9 institutes located in 7 countries and is led by the Centre de Recherche Astrophysique de Lyon (CRAL). The BlueMUSE project development is currently in Phase A, with an expected first light at the VLT in 2031. We introduce here the Top Level Requirements (TLRs) derived from the main science cases, and then present an overview of the BlueMUSE system and its subsystems fulfilling these TLRs. We specifically emphasize the tradeoffs that are made and the key distinctions compared to the MUSE instrument, upon which the system architecture is built.

astro-ph.IM↗

arXiv2024

The Blue Multi Unit Spectroscopic Explorer (BlueMUSE) on the VLT: characterization of two VPHG prototypes based on dichromated gelatin and photopolymer recording materials

Volume-phase holographic gratings (VPHGs) are widely used in astronomical spectrographs due to their adaptability and high diffraction efficiency. Most VPHGs in operation use dichromated gelatin as a recording material, whose performance is sensitive to the coating and development process, especially in the near-UV. In this letter, we present the characterization of two UV-blue VPHG prototypes for the BlueMUSE integral field spectrograph on the VLT, based on dichromated gelatin and the Bayfol$\circledR$HX photopolymer film as recording materials. Our measurements show that both prototypes meet the required diffraction efficiency and exhibit similar performance with a wavelength-average exceeding 70% in the 350-580 nm range. Deviations from theoretical models increase towards 350 nm, consistently with previous studies on similar gratings. We also report similar performances in terms spatial uniformity and grating-to-grating consistency. Likewise, no significant differences in wavefront error or scattered light are observed between the prototypes.

astro-ph.IM↗

arXiv2018

The Maunakea Spectroscopic Explorer Book 2018

(Abridged) This is the Maunakea Spectroscopic Explorer 2018 book. It is intended as a concise reference guide to all aspects of the scientific and technical design of MSE, for the international astronomy and engineering communities, and related agencies. The current version is a status report of MSE's science goals and their practical implementation, following the System Conceptual Design Review, held in January 2018. MSE is a planned 10-m class, wide-field, optical and near-infrared facility, designed to enable transformative science, while filling a critical missing gap in the emerging international network of large-scale astronomical facilities. MSE is completely dedicated to multi-object spectroscopy of samples of between thousands and millions of astrophysical objects. It will lead the world in this arena, due to its unique design capabilities: it will boast a large (11.25 m) aperture and wide (1.52 sq. degree) field of view; it will have the capabilities to observe at a wide range of spectral resolutions, from R2500 to R40,000, with massive multiplexing (4332 spectra per exposure, with all spectral resolutions available at all times), and an on-target observing efficiency of more than 80%. MSE will unveil the composition and dynamics of the faint Universe and is designed to excel at precision studies of faint astrophysical phenomena. It will also provide critical follow-up for multi-wavelength imaging surveys, such as those of the Large Synoptic Survey Telescope, Gaia, Euclid, the Wide Field Infrared Survey Telescope, the Square Kilometre Array, and the Next Generation Very Large Array.

astro-ph.IM↗

arXiv2018

Maunakea Spectroscopic Explorer Low Moderate Resolution Spectrograph Conceptual Design

The Maunakea Spectroscopic Explorer (MSE) Project is a planned replacement for the existing 3.6-m Canada France Hawaii Telescope (CFHT) into a 10-m class dedicated wide field highly multiplexed fibre fed spectroscopic facility. MSE seeks to tackle basic science questions ranging from the origin of stars and stellar systems, Galaxy archaeology at early times, galaxy evolution across cosmic time, to cosmology and the nature of dark matter and dark energy. MSE will be a primary follow-up facility for many key future photometric and astrometric surveys, as well as a major component in the study of the multi-wavelength Universe. The MSE is based on a prime focus telescope concept which illuminate 3200 fibres or more. These fibres are feeding a Low Moderate Resolution (LMR) spectrograph and a High Resolution (HR). The LMR will provide 2 resolution modes at R>2500 and R>5000 on a wavelength range of 360 to 950 nm and a resolution of R>3000 on the 950 nm to 1300 nm bandwidth. Possibly the H band will be also covered by a second NIR mode from ranging from 1450 to 1780 nm. The HR will have a resolution of R>39000 on the 360 to 600 nm wavelength range and R>20000 on the 600 to 900 nm bandwidth. This paper presents the LMR design after its Conceptual Design Review held in June 2017. It focuses on the general concept, optical and mechanical design of the instrument. It describes the associated preliminary expected performances especially concerning optical and thermal performances.

astro-ph.IM↗

arXiv2018

ELT HARMONI: Image Slicer Preliminary Design

Harmoni is the ELT's first light visible and near-infrared integral field spectrograph. It will provide four different spatial scales, ranging from coarse spaxels of 60 x 30 mas best suited for seeing limited observations, to 4 mas spaxels that Nyquist sample the diffraction limited point spread function of the ELT at near-infrared wavelengths. Each spaxel scale may be combined with eleven spectral settings, that provide a range of spectral resolving powers from R 3500 to R 20000 and instantaneous wavelength coverage spanning the 0.47 - 2.45 μm wavelength range of the instrument. The consortium consists of several institutes in Europe under leadership of Oxford University. Harmoni is starting its Final Design Phase after a Preliminary Design Phase in November, 2017. The CRAL has the responsibility of the Integral Field Unit design linking the Preoptics to the 4 Spectrographs. It is composed of a field splitter associated with a relay system and an image slicer that create from a rectangular Field of View a very long (540mm) output slit for each spectrograph. In this paper, the preliminary design and performances of Harmoni Image Slicer will be presented including image quality, pupil distortion and slit geometry. It has been designed by CRAL for Harmoni PDR in November, 2017. Special emphases will be put on straylight analysis and slice diffraction. The optimisation of the manufacturing and slit geometry will also be reported.

astro-ph.IM↗

arXiv2016

Collimating Slicer for Optical Integral Field Spectroscopy

Integral Field Spectroscopy (IFS) is a technique that gives simultaneously the spectrum of each spatial sampling element in a given object field. It is a powerful tool which rearranges the data cube (x, y, lambda) represented by two spatial dimensions defining the field and the spectral decomposition in a detector plane. In IFS, the spatial unit reorganizes the field and the spectral unit is being composed of a classical spectrograph.The development of a Collimating Slicer aims at proposing a new type of integral field spectrograph which should be more compact. The main idea is to combine the image slicer with the collimator of the spectrograph, thus mixing the spatial and spectral units. The traditional combination of slicer, pupil and slit elements and the spectrograph collimator is replaced by a new one composed of a slicer and collimator only. In this paper, the state of the art of integral field spectroscopy using image slicers is described. The new system based onto the development of a Collimating Slicer for optical integral field spectroscopy is depicted. First system analysis results and future improvements are discussed. It finally turns out that this new system looks very promising for low resolution spectroscopy.

astro-ph.IM↗

arXiv2016

Optical design of a multi-resolution, single shot spectrograph

Multi-object or integral field spectrographs are recognized techniques for achieving simultaneous spectroscopic observations of different or extended sky objects with a high multiplex factor. In this communication is described a complementary approach for realizing similar measurements under different spectral resolutions at the same time. We describe the basic principle of this new type of spectrometer, that is based on the utilization of an optical pupil slicer. An optical design inspired from an already studied instrument is then presented and commented for the sake of illustration. Technical issues about the pupil slicer and diffractive components are also discussed. We finally conclude on the potential advantages and drawbacks of the proposed system.

physics.ins-det↗