arXiv subjects

Florent Ravelet

Publications and source records attributed to Florent Ravelet.

11 recordsLinked to original sources

arXiv2014

Influence of Reynolds number and forcing type in a turbulent von Kármán flow

We present a detailed study of of a global bifurcation occuring in a turbulent von Kármán swirling flow. In this system, the statistically steady states progressively display hysteretic behaviour when the Reynolds number is increased above the transition to turbulence. We examine in detail this hysteresis using asymmetric forcing conditions --- rotating the impellers at different speeds. For very high Reynolds numbers, we study the sensitivity of the hysteresis cycle --- using complementary Particle Image Velocimetry (PIV) and global mechanical measurements --- to the forcing nature, imposing either the torque or the speed of the impellers. New mean states, displaying multiple quasi-steady states and negative differential responses, are experimentally observed in torque control. A simple analogy with electrical circuits is performed to understand the link between multi-stability and negative responses. The system is compared to other, similar "bulk" systems, to understand some relevant ingredients of negative differential responses, and studied in the framework of thermodynamics of long-range interacting systems. The experimental results are eventually compared to the related problem of Rayleigh-Bénard turbulence.

physics.flu-dyn↗

arXiv2013

Study of the cavitating instability on a grooved Venturi profile

Cavitation is a limiting phenomenon in many domains of fluid mechanics. Instabilities of a partial cavity developed on an hydrofoil, a converging-diverging step or in an inter-blade channel in turbomachinery, have already been investigated and described in many previous works. The aim of this study is to evaluate a passive control method of the sheet cavity. According to operating conditions, cavitation can be described by two different regimes: an unstable regime with a cloud cavitation shedding and a stable regime with only a pulsating sheet cavity. Avoiding cloud cavitation can limit structure damages since a pulsating sheet cavity is less agressive. The surface condition of a converging-diverging step, like a Venturi-type obstacle, is here studied as a solution for a passive control of the cavitation. This study discusses the effect of an organized roughness, in the shape of longitudinal grooves, on the developed sheet cavity. Analyzes conducted with Laser Doppler Velocimetry, visualisations and pressure measurements show that the grooves geometry, and especially the groove depth, acts on the sheet cavity dynamics. Results show that modifying the surface condition, by varying the grooves geometry, can reduce cavity sheet length and even suppress the cloud cavitation shedding.

physics.flu-dyn↗

arXiv2013

Forcing-dependent stability of steady states in a turbulent swirling flow

We study the influence of the forcing on the steady turbulent states of a von Kármán swirling flow, at constant impeller speed, or at constant torque. We find that the different forcing conditions change the nature of the stability of the steady states and reveal dynamical regimes that bear similarities with low-dimensional systems. We suggest that this forcing dependence may be an out- of-equilibrium analogue of the ensemble inequivalence, valid for long-range interacting statistical systems, and that it may be applicable to other turbulent systems.

physics.flu-dyn↗

arXiv2012

Design and Experimental Validation of a Ducted Counter-rotating Axial-flow Fans System

An experimental study on the design of counter-rotating axial-flow fans was carried out. The fans were designed using an inverse method. In particular, the system is designed to have a pure axial discharge flow. The counter-rotating fans operate in a ducted-flow configuration and the overall performances are measured in a normalized test bench. The rotation rate of each fan is independently controlled. The relative axial spacing between fans can vary from 17% to 310%. The results show that the efficiency is strongly increased compared to a conventional rotor or to a rotor-stator stage. The effects of varying the rotation rates ratio on the overall performances are studied and show that the system has a very flexible use, with a large patch of high efficient operating points in the parameter space. The increase of axial spacing causes only a small decrease of the efficiency

physics.flu-dyn↗

arXiv2010

Influence of global rotation and Reynolds number on the large-scale features of a turbulent Taylor-Couette flow

We experimentally study the turbulent flow between two coaxial and independently rotating cylinders. We determined the scaling of the torque with Reynolds numbers at various angular velocity ratios (Rotation numbers), and the behaviour of the wall shear stress when varying the Rotation number at high Reynolds numbers. We compare the curves with PIV analysis of the mean flow and show the peculiar role of perfect counterrotation for the emergence of organised large scale structures in the mean part of this very turbulent flow that appear in a smooth and continuous way: the transition resembles a supercritical bifurcation of the secondary mean flow.

physics.flu-dyn↗

arXiv2008

Experimental studies of liquid-liquid dispersion in a turbulent shear flow

We study liquid-liquid dispersions in a turbulent Taylor - Couette flow, produced between two counterrotating coaxial cylinders. In pure Water and in counterrotation, Reynolds numbers up to 1.4 10^5 are reached. We first characterize the single-phase flow, in terms of threshold for transition to turbulence, scaling of the torque and measurements of the mean flow and of the Reynolds stress by stereoscopic PIV. We then study the increase of the dissipation in the two-phase flows and find that the torque per unit mass can be twice the torque for a single-phase flow. Long-time behaviours are also reported.

physics.flu-dyn↗

arXiv2008

Experimental studies of turbulent Taylor-Couette flows: single phase and liquid-liquid dispersions

We study liquid-liquid dispersions in a turbulent Taylor-Couette flow, produced between two counterrotating coaxial cylinders. In pure Water and in counterrotation, Reynolds numbers up to 1.4 10^5 are reached. The liquids we use are a low-viscous Oil and pure Water or a Sodium Iodide solution with a refractive index matched to that of Oil, in order to get transparent dispersions. We first characterize the single-phase flow, in terms of threshold for transition to turbulence, scaling of the torque and measurements of the mean flow and of the Reynolds stress by stereoscopic PIV. We then study the increase of the dissipation in the two-phase flows and find that the torque per unit mass can be twice the torque for a single-phase flow. Long-time behaviours are also reported.

physics.flu-dyn↗

arXiv2008

Imaging method for interface rheological characterization

The present work investigates free damped oscillations of an oil drop in water after its release from a capillary tube. Both pure heptane drops and diluted crude oil drops are considered (in the second case the interface is covered by amphiphilic species, natural components of crude oil). Shadowgraph images of the drops are taken by means of a high speed camera and the drop contour is detected by image processing. The axisymmetric drop shape is then decomposed into spherical harmonics, which constitute the eigenmodes of oscillations predicted by the Rayleigh-Lamb theory. Time evolution of each mode is then obtained. The frequency and the damping rate of the principal mode (n=2) are accurately determined and compared with theoretical values for an immobile clean drop oscillating around spherical shape. For pure heptane drops, theoretical value of the frequency agrees well with experiments whereas the damping rate is significantly underestimated by theory. The experimental results clearly show that the different modes are coupled. Energy is thus transfered from mode n=2 to n=3, which probably explains the observed enhancement of the damping rate. The effect of the interface viscoelastic behaviour, induced by adsorbed amphiphilic species on the free oscillations was examined. No significant effect was observed in the experiments conditions (small amplitude oscillations and moderate aging).

physics.flu-dyn↗

arXiv2008

Supercritical transition to turbulence in an inertially-driven von Karman closed flow

We study the transition from laminar flow to fully developed turbulence for an inertially-driven von Karman flow between two counter-rotating large impellers fitted with curved blades over a wide range of Reynolds number (100 - 1 000 000). The transition is driven by the destabilisation of the azimuthal shear-layer, i.e., Kelvin-Helmholtz instability which exhibits travelling/drifting waves, modulated travelling waves and chaos below the emergence of a turbulent spectrum. A local quantity -the energy of the velocity fluctuations at a given point- and a global quantity -the applied torque- are used to monitor the dynamics. The local quantity defines a critical Reynolds number Rec for the onset of time-dependence in the flow, and an upper threshold/crossover Ret for the saturation of the energy cascade. The dimensionless drag coefficient, i.e., the turbulent dissipation, reaches a plateau above this finite Ret, as expected for a "Kolmogorov"-like turbulence for Re -> infinity. Our observations suggest that the transition to turbulence in this closed flow is globally supercritical: the energy of the velocity fluctuations can be considered as an order parameter characterizing the dynamics from the first laminar time-dependence up to the fully developed turbulence. Spectral analysis in temporal domain moreover reveals that almost all of the fluctuations energy is stored in time-scales one or two orders of magnitude slower than the time-scale based on impeller frequency.

physics.flu-dyn↗

arXiv2005

Towards an experimental von Karman dynamo: numerical studies for an optimized design

Numerical studies of a kinematic dynamo based on von Karman type flows between two counterrotating disks in a finite cylinder are reported. The flow has been optimized using a water model experiment, varying the driving impellers configuration. A solution leading to dynamo action for the mean flow has been found. This solution may be achieved in VKS2, the new sodium experiment to be performed in Cadarache, France. The optimization process is described and discussed, then the effects of adding a stationary conducting layer around the flow on the threshold, on the shape of the neutral mode and on the magnetic energy balance are studied. Finally, the possible processes involved into kinematic dynamo action in a von Karman flow are reviewed and discussed. Among the possible processes we highlight the joint effect of the boundary-layer radial velocity shear and of the Ohmic dissipation localized at the flow/outer-shell boundary.

physics.flu-dyn↗

arXiv2004

Multistability and memory effect in a highly turbulent flow: experimental evidence for a global bifurcation

We report an experimental evidence of a global bifurcation on a highly turbulent von Karman flow. The mean flow presents multiple solutions: the canonical symmetric solution becomes marginally unstable towards a flow which breaks the basic symmetry of the driving apparatus even at very large Reynolds number. The global bifurcation between these states is highly subcritical and the system thus keeps a memory of its history. The transition recalls low-dimension dynamical systems transitions and exhibits a very peculiar statistics. We discuss the role of turbulence in two ways: the multiplicity of hydrodynamical solutions and the effect of fluctuations on the nature of transitions.

physics.flu-dyn↗