arXiv subjects

Florian Gast

Publications and source records attributed to Florian Gast.

4 recordsLinked to original sources

arXiv2026

Quantization Limitations of Leakage Suppression in Self-Calibrating Monostatic Integrated Sensing and Communication MIMO Systems

Power leaking directly from transmitting into receiving radio-frequency chains is a key challenge in the realization of monostatic sensing applications with multi-antenna communication front-ends, to which a promising solution is digitally precoding transmitted signals for improved leakage suppression. While digital transmit precodings perform well in theory, real-world deployments typically exhibit severely degraded leakage suppression. This work investigates quantization noise as a primary factor limiting the performance of such precoding schemes. A closed-form solution predicting the impact of quantization noise on the performance of arbitrary digital joint leakage estimation and leakage suppression precodings is derived, numerically analyzed, and validated in a hardware testbed.

eess.SP↗

arXiv2026

From Coverage to Sensing: ISAC meets FR3

Future 6G systems are expected to exploit upper midband spectrum in frequency range 3 (FR3) not only for high throughput communications, but also for sensing services such as localization, detection, and situational awareness. The following paper develops a concrete path from today's coverage-oriented deployments to FR3 networks that treat sensing as a native function. We first show how existing FR2 radars can be time-multiplexed and coordinated under a $6$G medium access control as radar-as-a-service, forming a bridge between legacy sensing and network-managed integrated sensing and communications (ISAC). We then propose a hierarchical FR3 beam-alignment strategy in which coarse access occurs at lower frequencies and refinement occurs at upper FR3, and quantify the resulting sensing and communication capabilities via range-angle Cram{\'{e}}r-Rao bounds in the near field. We identify intra- and inter-beam squint phenomena specific to wideband FR3 arrays, and discuss design approaches to mitigate them. On the signal-processing side, we argue that FR3 sensing cannot rely solely on pilot resources and discuss how much sensing information can be extracted from payload resource elements. We further highlight the role of calibrated FR3 channel simulators and real-time models as the core of wireless digital twins for training and evaluating ISAC algorithms, and discuss how massive MIMO and dense or distributed deployments at FR3 naturally act as large reconfigurable sensor arrays.

eess.SP↗

arXiv2026

Energy-Efficient Mobile Communications using an Adaptive Gearbox-PHY under Hardware Constraints

Future mobile networks must achieve substantial improvements in energy efficiency to offset the anticipated traffic growth. Despite this requirement, many discussions regarding physical layer design remain primarily focused on peak data rates and spectral efficiency, even though typical network operation is dominated by low-data-rate regimes. To address this mismatch, the Gearbox-PHY was proposed as an energy-efficient physical layer architecture that dynamically switches between modulation schemes and their associated analog front ends in order to adapt to varying operating requirements. This paper quantifies the achievable energy savings by jointly modeling front end power consumption and hardware-aware spectral efficiency to formulate an energy-per-bit minimization problem. To move beyond idealized assumptions, non-ideal hardware effects, including oscillator phase noise and limited quantizer resolution, are incorporated. These impairments simultaneously affect power consumption and achievable spectral efficiency, thereby introducing trade-offs between front end complexity, hardware non-linearities, spectral efficiency, and energy efficiency. Numerical results demonstrate that the Gearbox-PHY enables significant energy savings, particularly at low data rates. Evaluations with spatially distributed users confirm that gains of up to two orders of magnitude persist in a cellular deployment scenario.

eess.SP↗

arXiv2023

Comparing Iterative and Least-Squares Based Phase Noise Tracking in Receivers with 1-bit Quantization and Oversampling

High data rates require vast bandwidths, that can be found in the sub-THz band, and high sampling frequencies, which are predicted to lead to a problematically high analog-to-digital converter (ADC) power consumption. It was proposed to use 1-bit ADCs to mitigate this problem. Moreover, oscillator phase noise is predicted to be especially high at sub-THz carrier frequencies. For synchronization the phase must be tracked based on 1-bit quantized observations. We study iterative data-aided phase estimation, i.e., the expectation-maximization and the Fisher-scoring algorithm, compared to least-squares (LS) phase estimation. For phase interpolation at the data symbols, we consider the Kalman filter and the Rauch-Tung-Striebel algorithm. Compared to LS estimation, iterative phase noise tracking leads to a significantly lower estimation error variance at high signal-to-noise ratios. However, its benefit for the spectral efficiency using zero-crossing modulation (ZXM) is limited to marginal gains for high faster-than-Nyquist signaling factors, i.e., higher order ZXM modulation.

eess.SP↗