arXiv subjects

Flyura Djurabekova

Publications and source records attributed to Flyura Djurabekova.

At least 73 records · Page 4Linked to original sources

arXiv2020

Tungsten migration energy barriers for surface diffusion: a parameterization for KMC simulations

We have calculated the migration barriers for surface diffusion on Tungsten. Our results form a self-sufficient parameterization for Kinetic Monte Carlo simulations of arbitrarily rough atomic tungsten surfaces, as well as nanostructures such as nanotips and nanoclusters. The parameterization includes first- and second-nearest neighbour atom jump processes, as well as a third-nearest neighbour exchange process. The migration energy barriers of all processes are calculated with the Nudged Elastic Band method. The same attempt frequency for all processes is found sufficient and the value is fitted to Molecular Dynamics simulations. The model is validated by correctly simulating with Kinetic Monte Carlo the energetically favourable W nanocluster shapes, in good agreement with Molecular Dynamics simulations.

cond-mat.mtrl-sci↗

arXiv2020

Crystal Defects: A Portal To Dark Matter Detection

We propose to use the defect creation energy loss in commonly used high energy physics solid state detectors as a tool to statistically identify dark matter signal from background. We simulate the energy loss in the process of defect creation using density functional theory and molecular dynamics methods and calculate the corresponding expected dark matter spectra. We show that in phonon-mediated solid state detectors, the energy loss due to defect creation convolved with the expected dark matter interaction signal results in a significant change in the expected spectra for common detector materials. With recent progress towards $\sim$10 eV threshold low-mass dark matter searches, this variation in expected dark matter spectrum can be used as a direct signature of dark matter interactions with atomic nuclei.

physics.ins-det↗

arXiv2020

Classification of vacuum arc breakdowns in a pulsed DC system

Understanding the microscopic phenomena behind vacuum arc ignition and generation is crucial for being able to control the breakdown rate, thus improving the effectiveness of many high-voltage applications where frequent breakdowns limit the operation. In this work, statistical properties of various aspects of breakdown, such as the number of pulses between breakdowns, breakdown locations and crater sizes are studied independently with almost identical Pulsed DC Systems at the University of Helsinki and in CERN. In high-gradient experiments, copper electrodes with parallel plate capacitor geometry, undergo thousands of breakdowns. The results support the classification of the events into primary and secondary breakdowns, based on the distance and number of pulses between two breakdowns. Primary events follow a power law on the log--log scale with the slope $α\approx 1.33$, while the secondaries are highly dependent on the pulsing parameters.

physics.ins-det↗

arXiv2020

Fundamental Phenomena and Applications of Swift Heavy Ion Irradiations

This review concentrates on the specific properties and characteristics of damage structures generated with high-energy ions in the electronic energy loss regime. Irradiation experiments with so-called swift heavy ions (SHI) find applications in many different fields, with examples presented in ion-track nanotechnology, radiation hardness analysis of functional materials, and laboratory tests of cosmic radiation. The basics of the SHI-solid interaction are described with special attention to processes in the electronic subsystem. The broad spectrum of damage phenomena is exemplified for various materials and material classes, along with a description of typical characterization techniques. The review also presents state-of-the-art modeling efforts that try to account for the complexity of the coupled processes of the electronic and atomic subsystems. Finally, the relevance of SHI phenomena for effects induced by fission fragments in nuclear fuels and how this knowledge can be applied to better estimate damage risks in nuclear materials is discussed.

cond-mat.mtrl-sci↗

arXiv2019

Machine-learning interatomic potential for radiation damage and defects in tungsten

We introduce a machine-learning interatomic potential for tungsten using the Gaussian Approximation Potential framework. We specifically focus on properties relevant for simulations of radiation-induced collision cascades and the damage they produce, including a realistic repulsive potential for the short-range many-body cascade dynamics and a good description of the liquid phase. Furthermore, the potential accurately reproduces surface properties and the energetics of vacancy and self-interstitial clusters, which have been long-standing deficiencies of existing potentials. The potential enables molecular dynamics simulations of radiation damage in tungsten with unprecedented accuracy.

physics.comp-ph↗

arXiv2019

Ab Initio calculation of field emission from metal surfaces with atomic--scale defects

In this work we combine density functional theory and quantum transport calculations to study the influence of atomic--scale defects on the work function and field emission characteristics of metal surfaces. We develop a general methodology for the calculation of the field emitted current density from nano-featured surfaces, which is then used to study specific defects on a Cu(111) surface. Our results show that the inclusion of a defect can significantly locally enhance the field emitted current density. However, this increase is attributed solely to the decrease of the work function due to the defect, with the effective field enhancement being minute. Finally, the Fowler--Nordheim equation is found to be valid when the modified value for the work function is used, with only an approximately constant factor separating the computed currents from those predicted by the Fowler--Nordheim equation.

cond-mat.mes-hall↗

arXiv2019

Atomistic behavior of metal surfaces under high electric fields

Combining classical electrodynamics and density functional theory (DFT) calculations, we develop a general and rigorous theoretical framework that describes the energetics of metal surfaces under high electric fields. We show that the behavior of a surface atom in the presence of an electric field can be described by the polarization characteristics of the permanent and field-induced charges in its vicinity. We use DFT calculations for the case of a W adatom on a W{110} surface to confirm the predictions of our theory and quantify its system-specific parameters. Our quantitative predictions for the diffusion of W-on-W{110} under field are in good agreement with experimental measurements. This work is a crucial step towards developing atomistic computational models of such systems for long-term simulations.

cond-mat.mtrl-sci↗

arXiv2019

Vacuum electrical breakdown conditioning study in a parallel plate electrode pulsed DC system

Conditioning of a metal structure in a high-voltage system is the progressive development of resistance to vacuum arcing over the operational life of the system. This is, for instance, seen during the initial operation of radio frequency (rf) cavities in particle accelerators. It is a relevant topic for any technology where breakdown limits performance, and where conditioning continues for a significant duration of system runtime. Projected future linear accelerators require structures with accelerating gradients of up to 100 MV/m. Currently, this performance level is only achievable after a multi-month conditioning period. In this work, a pulsed DC system applying voltage pulses over parallel disk electrodes was used to study the conditioning process, with the objective of obtaining insight into its underlying mechanics, and ultimately, to find ways to shorten the conditioning process. Two kinds of copper electrodes were tested: As-prepared machine-turned electrodes ("hard" copper), and electrodes that additionally had been subjected to high temperature treatments ("soft" copper). The conditioning behaviour of the soft electrodes was found to be similar to that of comparably treated accelerating structures, indicating a similar conditioning process. The hard electrodes reached the same ultimate performance as the soft electrodes much faster, with a difference of more than an order of magnitude in the number of applied voltage pulses. Two distinctly different distributions of breakdown locations were observed on the two types of electrodes. Considered together, our results support the crystal structure dislocation theory of breakdown, and suggest that the conditioning of copper in high field systems such as rf accelerating structures is dominated by material hardening.

physics.app-ph↗

arXiv2019

Direct observation of vacuum arc evolution with nanosecond resolution

Sufficiently high voltage applied between two metal electrodes, even in ultra high vacuum conditions, results in an inevitable discharge that lights up the entire gap, opening a conductive channel through the vacuum and parasitically consuming large amounts of energy. Despite many efforts to understand the processes that lead to this phenomenon, known as vacuum arc, there is still no consensus regarding the role of each electrode in the evolution of such a momentous process as lightning. Employing a high-speed camera, we capture the entire lightning process step-by-step with a nanosecond resolution and find which of the two electrodes holds the main responsibility for igniting the arc. The light that gradually expands from the positively charged electrode (anode), often is assumed to play the main role in the formation of a vacuum arc. However, both the nanosecond-resolution images of vacuum arc evolution and the corresponding theoretical calculations agree that the conductive channel between the electrodes is built in the form of cathodic plasma long before any significant activity develops in the anode. We show evidently that the anode illumination is weaker and plays a minor role in igniting and maintaining the conductive channel.

physics.app-ph↗

arXiv2018

Molecular dynamics simulations of surface modification formations on polycrystalline Cu under high electric fields

Vacuum breakdowns in particle accelerators and other devices operating at high electric fields is a common problem in the operation of these devices. It has been proposed that the onset of vacuum breakdowns is associated with appearance of surface protrusions while the device is in operation under high electric field. Moreover, the breakdown tolerance of an electrode material was correlated with the type of lattice structure of the material. In the current paper we conduct molecular dynamics simulations of nanocrystalline copper surfaces and show the possibility of protrusion growth under the stress exerted on the surface by an applied electrostatic field. We show the importance of grain boundaries on the protrusion formation and establish a linear relationship between the necessary electrostatic stress for protrusion formation and the temperature of the system. We show that time for protrusion formation increases with the lowering electrostatic field and give the Arrhenius extrapolation to the case of lower fields. General discussion of the protrusion formation mechanisms in the case of polycrystalline copper surfaces is presented.

cond-mat.mtrl-sci↗

arXiv2018

Directional Sensitivity In Light-Mass Dark Matter Searches With Single-Electron Resolution Ionization Detectors

We propose a method using solid state detectors with directional sensitivity to dark matter interactions to detect low-mass Weakly Interacting Massive Particles (WIMPs) originating from galactic sources. In spite of a large body of literature for high-mass WIMP detectors with directional sensitivity, no available technique exists to cover WIMPs in the mass range <1 GeV. We argue that single-electron resolution semiconductor detectors allow for directional sensitivity once properly calibrated. We examine commonly used semiconductor material response to these low-mass WIMP interactions.

physics.ins-det↗

arXiv2018

Au nanowire junction breakup through surface atom diffusion

Metallic nanowires are known to break into shorter fragments due to the Rayleigh instability mechanism. This process is strongly accelerated at elevated temperatures and can completely hinder the functioning of nanowire-based devices like e.g. transparent conductive and flexible coatings. At the same time, arranged gold nanodots have important applications in electrochemical sensors. In this paper we perform a series of annealing experiments of gold and silver nanowires and nanowire junctions at fixed temperatures 473, 673, 873 and 973 K (200, 400, 600 and 700 °C) during a time period of 10 minutes. We show that nanowires are especially prone to fragmentation around junctions and crossing points even at comparatively low temperatures. The fragmentation process is highly temperature dependent and the junction region breaks up at a lower temperature than a single nanowire. We develop a gold parametrization for Kinetic Monte Carlo simulations and demonstrate the surface diffusion origin of the nanowire junction fragmentation. We show that nanowire fragmentation starts at the junctions with high reliability and propose that aligning nanowires in a regular grid could be used as a technique for fabricating arrays of nanodots.

cond-mat.mtrl-sci↗

arXiv2018

Migration barriers for surface diffusion on a rigid lattice: challenges and solutions

Atomistic rigid lattice Kinetic Monte Carlo is an efficient method for simulating nano-objects and surfaces at timescales much longer than those accessible by molecular dynamics. A laborious part of constructing any Kinetic Monte Carlo model is, however, to calculate all migration barriers that are needed to give the probabilities for any atom jump event to occur in the simulations. One of the common methods of barrier calculations is Nudged Elastic Band. The number of barriers needed to fully describe simulated systems is typically between hundreds of thousands and millions. Calculations of such a large number of barriers of various processes is far from trivial. In this paper, we will discuss the challenges arising during barriers calculations on a surface and present a systematic and reliable tethering force approach to construct a rigid lattice barrier parameterization of face-centred and body-centred cubic metal lattices. We have produced several different barrier sets for Cu and for Fe that can be used for KMC simulations of processes on arbitrarily rough surfaces. The sets are published as Data in Brief articles and available for the use.

cond-mat.mtrl-sci↗

arXiv2018

Dynamic coupling of a finite element solver to large-scale atomistic simulations

We propose a method for efficiently coupling the finite element method with atomistic simulations, while using molecular dynamics or kinetic Monte Carlo techniques. Our method can dynamically build an optimized unstructured mesh that follows the geometry defined by atomistic data. On this mesh, different multiphysics problems can be solved to obtain distributions of physical quantities of interest, which can be fed back to the atomistic system. The simulation flow is optimized to maximize computational efficiency while maintaining good accuracy. This is achieved by providing the modules for a) optimization of the density of the generated mesh according to requirements of a specific geometry and b) efficient extension of the finite element domain without a need to extend the atomistic one. Our method is organized as an open-source C++ code. In the current implementation, an efficient Laplace equation solver for calculation of electric field distribution near rough atomistic surface demonstrates the capability of the suggested approach.

cs.CE↗

arXiv2017

Cu self-sputtering MD simulations for 0.1-5 keV ions at elevated temperatures

Self-sputtering of copper under high electric fields is considered to contribute to plasma buildup during a vacuum breakdown event frequently observed near metal surfaces, even in ultra high vacuum condition in different electric devices. In this study, by means of molecular dynamics simulations, we analyze the effect of surface temperature and morphology on the yield of self-sputtering of copper with ion energies of 0.1-5 keV. We analyze all three low-index surfaces of Cu, {100}, {110} and {111}, held at different temperatures, 300 K, 500 K and 1200 K. The surface roughness relief is studied by either varying the angle of incidence on flat surfaces, or by using arbitrary roughened surfaces, which result in a more natural distribution of surface relief variations. Our simulations provide detailed characterization of copper self-sputtering with respect to different material temperatures, crystallographic orientations, surface roughness, energies, and angles of ion incidence.

cond-mat.mtrl-sci↗

arXiv2017

Local segregation versus irradiation effects in high-entropy alloys: Steady-state conditions in a driven system

We study order transitions and defect formation in a model high-entropy alloy (CuNiCoFe) under ion irradiation by means of molecular dynamics simulations. Using a hybrid Monte-Carlo/molecular dynamics scheme a model alloy is generated which is thermodynamically stabilized by configurational entropy at elevated temperatures, but partly decomposes at lower temperatures by copper precipation. Both the high-entropy and the multiphase sample are then subjected to simulated particle irradiation. The damage accumulation is analyzed and compared to an elemental Ni reference system. The results reveal that the high-entropy alloy---independent of the initial configuration---installs a certain fraction of short-range order even under particle irradiation. Moreover, the results provide evidence that defect accumulation is reduced in the high-entropy alloy. This is because the reduced mobility of point defects leads to a steady state of defect creation and annihilation. The lattice defects generated by irradiation are shown to act as sinks for Cu segregation.

cond-mat.mtrl-sci↗

arXiv2017

Adatom diffusion in high electric fields

Strong electric fields are known to create biased adatom migration on metallic surfaces. We present a Kinetic Monte Carlo model that can simulate adatom migration on a tungsten (W) surface in electric fields. We validate our model by using it to calculate the drift velocity of the adatom at different fields and temperature and comparing the results with experimental data from the literature. We obtain excellent agreement.

cond-mat.mtrl-sci↗

arXiv2017

Simulations of surface stress effects in nanoscale single crystals

Onset of vacuum arcing near a metal surface is often associated with nanoscale asperities, which may dynamically appear due to different processes ongoing in the surface and subsurface layers in the presence of high electric fields. Thermally activated processes, as well as plastic deformation caused by tensile stress due to an applied electric field, are usually not accessible by atomistic simulations because of long time needed for these processes to occur. On the other hand, finite element methods, able to describe the process of plastic deformations in materials at realistic stresses, do not include surface properties. The latter are particularly important for the problems where the surface plays crucial role in the studied process, as for instance, in case of plastic deformations at a nanovoid. In the current study by means of molecular dynamics and finite element simulations we analyse the stress distribution in single crystal copper containing a nanovoid buried deep under the surface. We have developed a methodology to incorporate the surface effects into the solid mechanics framework by utilizing elastic properties of crystals, pre-calculated using molecular dynamic simulations. The method leads to computationally efficient stress calculations and can be easily implemented in commercially available finite element software, making it an attractive analysis tool.

cond-mat.mtrl-sci↗