arXiv subjects

Fouad Bennis

Publications and source records attributed to Fouad Bennis.

32 records · Page 2Linked to original sources

arXiv2010

Integrating digital human modeling into virtual environment for ergonomic oriented design

Virtual human simulation integrated into virtual reality applications is mainly used for virtual representation of the user in virtual environment or for interactions between the user and the virtual avatar for cognitive tasks. In this paper, in order to prevent musculoskeletal disorders, the integration of virtual human simulation and VR application is presented to facilitate physical ergonomic evaluation, especially for physical fatigue evaluation of a given population. Immersive working environments are created to avoid expensive physical mock-up in conventional evaluation methods. Peripheral motion capture systems are used to capture natural movements and then to simulate the physical operations in virtual human simulation. Physical aspects of human's movement are then analyzed to determine the effort level of each key joint using inverse kinematics. The physical fatigue level of each joint is further analyzed by integrating a fatigue and recovery model on the basis of physical task parameters. All the process has been realized based on VRHIT platform and a case study is presented to demonstrate the function of the physical fatigue for a given population and its usefulness for worker selection.

cs.RO↗

arXiv2010

A new muscle fatigue and recovery model and its ergonomics application in human simulation

Although automatic techniques have been employed in manufacturing industries to increase productivity and efficiency, there are still lots of manual handling jobs, especially for assembly and maintenance jobs. In these jobs, musculoskeletal disorders (MSDs) are one of the major health problems due to overload and cumulative physical fatigue. With combination of conventional posture analysis techniques, digital human modelling and simulation (DHM) techniques have been developed and commercialized to evaluate the potential physical exposures. However, those ergonomics analysis tools are mainly based on posture analysis techniques, and until now there is still no fatigue index available in the commercial software to evaluate the physical fatigue easily and quickly. In this paper, a new muscle fatigue and recovery model is proposed and extended to evaluate joint fatigue level in manual handling jobs. A special application case is described and analyzed by digital human simulation technique.

cs.RO↗

arXiv2010

Fatigue evaluation in maintenance and assembly operations by digital human simulation

Virtual human techniques have been used a lot in industrial design in order to consider human factors and ergonomics as early as possible. The physical status (the physical capacity of virtual human) has been mostly treated as invariable in the current available human simulation tools, while indeed the physical capacity varies along time in an operation and the change of the physical capacity depends on the history of the work as well. Virtual Human Status is proposed in this paper in order to assess the difficulty of manual handling operations, especially from the physical perspective. The decrease of the physical capacity before and after an operation is used as an index to indicate the work difficulty. The reduction of physical strength is simulated in a theoretical approach on the basis of a fatigue model in which fatigue resistances of different muscle groups were regressed from 24 existing maximum endurance time (MET) models. A framework based on digital human modeling technique is established to realize the comparison of physical status. An assembly case in airplane assembly is simulated and analyzed under the framework. The endurance time and the decrease of the joint moment strengths are simulated. The experimental result in simulated operations under laboratory conditions confirms the feasibility of the theoretical approach.

cs.RO↗

arXiv2010

A Framework for Interactive Work Design based on Digital Work Analysis and Simulation

Due to the flexibility and adaptability of human, manual handling work is still very important in industry, especially for assembly and maintenance work. Well-designed work operation can improve work efficiency and quality; enhance safety, and lower cost. Most traditional methods for work system analysis need physical mock-up and are time consuming. Digital mockup (DMU) and digital human modeling (DHM) techniques have been developed to assist ergonomic design and evaluation for a specific worker population (e.g. 95 percentile); however, the operation adaptability and adjustability for a specific individual are not considered enough. In this study, a new framework based on motion tracking technique and digital human simulation technique is proposed for motion-time analysis of manual operations. A motion tracking system is used to track a worker's operation while he/she is conducting a manual handling work. The motion data is transferred to a simulation computer for real time digital human simulation. The data is also used for motion type recognition and analysis either online or offline for objective work efficiency evaluation and subjective work task evaluation. Methods for automatic motion recognition and analysis are presented. Constraints and limitations of the proposed method are discussed.

cs.RO↗

arXiv2010

2D multi-objective placement algorithm for free-form components

This article presents a generic method to solve 2D multi-objective placement problem for free-form components. The proposed method is a relaxed placement technique combined with an hybrid algorithm based on a genetic algorithm and a separation algorithm. The genetic algorithm is used as a global optimizer and is in charge of efficiently exploring the search space. The separation algorithm is used to legalize solutions proposed by the global optimizer, so that placement constraints are satisfied. A test case illustrates the application of the proposed method. Extensions for solving the 3D problem are given at the end of the article.

physics.class-ph↗

arXiv2009

Multi-Objective Optimisation Method for Posture Prediction and Analysis with Consideration of Fatigue Effect and its Application Case

Automation technique has been widely used in manufacturing industry, but there are still manual handling operations required in assembly and maintenance work in industry. Inappropriate posture and physical fatigue might result in musculoskeletal disorders (MSDs) in such physical jobs. In ergonomics and occupational biomechanics, virtual human modelling techniques have been employed to design and optimize the manual operations in design stage so as to avoid or decrease potential MSD risks. In these methods, physical fatigue is only considered as minimizing the muscle or joint stress, and the fatigue effect along time for the posture is not considered enough. In this study, based on the existing methods and multiple objective optimisation method (MOO), a new posture prediction and analysis method is proposed for predicting the optimal posture and evaluating the physical fatigue in the manual handling operation. The posture prediction and analysis problem is mathematically described and a special application case is demonstrated for analyzing a drilling assembly operation in European Aeronautic Defence & Space Company (EADS) in this paper.

cs.RO↗

arXiv2009

A new muscle fatigue and recovery model and its ergonomics application in human simulation

cs.RO↗

arXiv2009

Dynamic Muscle Fatigue Evaluation in Virtual Working Environment

Musculoskeletal disorder (MSD) is one of the major health problems in mechanical work especially in manual handling jobs. Muscle fatigue is believed to be the main reason for MSD. Posture analysis techniques have been used to expose MSD risks of the work, but most of the conventional methods are only suitable for static posture analysis. Meanwhile the subjective influences from the inspectors can result differences in the risk assessment. Another disadvantage is that the evaluation has to be taken place in the workshop, so it is impossible to avoid some design defects before data collection in the field environment and it is time consuming. In order to enhance the efficiency of ergonomic MSD risk evaluation and avoid subjective influences, we develop a new muscle fatigue model and a new fatigue index to evaluate the human muscle fatigue during manual handling jobs in this paper. Our new fatigue model is closely related to the muscle load during working procedure so that it can be used to evaluate the dynamic working process. This muscle fatigue model is mathematically validated and it is to be further experimental validated and integrated into a virtual working environment to evaluate the muscle fatigue and predict the MSD risks quickly and objectively.

cs.RO↗

arXiv2008

Framework for Dynamic Evaluation of Muscle Fatigue in Manual Handling Work

Muscle fatigue is defined as the point at which the muscle is no longer able to sustain the required force or work output level. The overexertion of muscle force and muscle fatigue can induce acute pain and chronic pain in human body. When muscle fatigue is accumulated, the functional disability can be resulted as musculoskeletal disorders (MSD). There are several posture exposure analysis methods useful for rating the MSD risks, but they are mainly based on static postures. Even in some fatigue evaluation methods, muscle fatigue evaluation is only available for static postures, but not suitable for dynamic working process. Meanwhile, some existing muscle fatigue models based on physiological models cannot be easily used in industrial ergonomic evaluations. The external dynamic load is definitely the most important factor resulting muscle fatigue, thus we propose a new fatigue model under a framework for evaluating fatigue in dynamic working processes. Under this framework, virtual reality system is taken to generate virtual working environment, which can be interacted with the work with haptic interfaces and optical motion capture system. The motion information and load information are collected and further processed to evaluate the overall work load of the worker based on dynamic muscle fatigue models and other work evaluation criterions and to give new information to characterize the penibility of the task in design process.

cs.RO↗

arXiv2007

An Integrated Simulation System for Human Factors Study

It has been reported that virtual reality can be a useful tool for ergonomics study. The proposed integrated simulation system aims at measuring operator's performance in an interactive way for 2D control panel design. By incorporating some sophisticated virtual reality hardware/software, the system allows natural human-system and/or human-human interaction in a simulated virtual environment; enables dynamic objective measurement of human performance; and evaluates the quality of the system design in human factors perspective based on the measurement. It can also be for operation training for some 2D control panels.

cs.HC↗

arXiv2007

Virtual reality: A human centered tool for improving Manufacturing

Manufacturing is using Virtual Reality tools to enhance the product life cycle. Their definitions are still in flux and it is necessary to define their connections. Thus, firstly, we will introduce more closely some definitions where we will find that, if the Virtual manufacturing concepts originate from machining operations and evolve in this manufacturing area, there exist a lot of applications in different fields such as casting, forging, sheet metalworking and robotics (mechanisms). From the recent projects in Europe or in USA, we notice that the human perception or the simulation of mannequin is more and more needed in both fields. In this context, we have isolated some applications as ergonomic studies, assembly and maintenance simulation, design or training where the virtual reality tools can be applied. Thus, we find out a family of applications where the virtual reality tools give the engineers the main role in the optimization process. We will illustrate our paper by several examples where virtual reality interfaces are used and combined with optimization tools as multi-agent systems.

cs.RO↗

arXiv2007

A Framework to Illustrate Kinematic Behavior of Mechanisms by Haptic Feedback

The kinematic properties of mechanisms are well known by the researchers and teachers. The theory based on the study of Jacobian matrices allows us to explain, for example, the singular configuration. However, in many cases, the physical sense of such properties is difficult to explain to students. The aim of this article is to use haptic feedback to render to the user the signification of different kinematic indices. The framework uses a Phantom Omni and a serial and parallel mechanism with two degrees of freedom. The end-effector of both mechanisms can be moved either by classical mouse, or Phantom Omni with or without feedback.

cs.RO↗

arXiv2007

Realistic Rendering of Kinetostatic Indices of Mechanisms

The work presented in this paper is related to the use of a haptic device in an environment of robotic simulation. Such device introduces a new approach to feel and to understand the boundaries of the workspace of mechanisms as well as its kinetostatic properties. Indeed, these concepts are abstract and thus often difficult to understand for the end-users. To catch his attention, we propose to amplify the problems of the mechanisms in order to help him to take the good decisions.

cs.RO↗

arXiv2007

Périphériques haptiques et simulation d'objets, de robots et de mannequins dans un environnement de CAO-Robotique : eM-Virtual Desktop

This paper presents the development of a new software in order to manage objects, robots and mannequins in using the possibilities given by the haptic feedback of the Phantom desktop devices. The haptic device provides 6 positional degree of freedom sensing but three degrees force feedback. This software called eM-Virtual Desktop is integrated in the Tecnomatix's solution called eM-Workplace. The eM-Workplace provides powerful solutions for planning and designing of complex assembly facilities, lines and workplaces. In the digital mockup context, the haptic interfaces can be used to reduce the development cycle of products. Three different loops are used to manage the graphic, the collision detection and the haptic feedback according to theirs own frequencies. The developed software is currently tested in industrial context by a European automotive constructor.

cs.RO↗